$ 10.00
Ikelite SKU: 0923.06 | Helix SKU: 092306
A self-adhesive vinyl label covers the white lettering and ring details on the front of the lens to reduce reflections when used behind a dome port underwater.
Designed specifically for use with the following lenses:
$ 10.00
Ikelite SKU: 0923.05 | Helix SKU: 092305
A self-adhesive vinyl label covers the white lettering and ring details on the front of the lens to reduce reflections when used behind a dome port underwater.
Designed specifically for use with the Canon 16-35mm f/2.8 III USM lens.
$ 10.00
Ikelite SKU: 092304 | Helix SKU: 092304
A self-adhesive vinyl label covers the white lettering and ring details on the front of the lens to reduce reflections when used behind a dome port underwater.
Designed specifically for use with the Canon 16-35mm f/2.8 II USM lens.
$ 10.00
Ikelite SKU: 0923.02 | Helix SKU: 092302
A self-adhesive vinyl label covers the white lettering and ring details on the front of the lens to reduce reflections when used behind a dome port underwater.
Designed specifically for use with the Canon 17-40mm f/4 USM Lens.
$ 10.00
Ikelite SKU: 0923.01 | Helix SKU: 092301
A self-adhesive vinyl label covers the white lettering and ring details on the front of the lens to reduce reflections when used behind a dome port underwater.
Designed specifically for use with the Canon EF 16-35mm f/4L IS USM lens.
$ 10.00
Ikelite SKU: 0591.3 | Helix SKU: 05913
Diffuser for DS161, DS160 and DS125 type strobes. This diffuser increases angle of coverage by approximately 10 degrees, with a one f/stop reduction in intensity. Includes two lanyard holes.
$ 12.00
Ikelite SKU: 0565.54 | Helix SKU: 056554
Use to transition between 1/2-inch and 3/4-inch flex arm components. Features male fitting on 1/2-inch end and female fitting on 3/4-inch end.
$ 9.95
Ikelite SKU: 0561.2 | Helix SKU: 05612
Snap-in diffuser for DS50, DS51, and AF35 type strobes. This diffuser increases angle of coverage by approximately 10-degrees, with a one f/stop reduction in intensity. Includes two lanyard holes.
$ 15.00
Ikelite SKU: 0321.17 | Helix SKU: 032117
Neoprene mask strap cover with velcro closure.
$ 9.95
Ikelite SKU: 0321.10 | Helix SKU: 032110
Vinyl break-away lanyard with locking ring as featured with many Ikelite flashlights, accessories, and compact digital housings.
For safety reasons, this lanyard is designed to break if caught on an object underwater. We do not recommend carrying a flashlight by the lanyard on the surface. We do not recommend carrying a housing by the lanyard either underwater or on the surface.
$ 12.95
Ikelite SKU: 0301.14 | Helix SKU: 030114
Acetyl cover to protect the o-ring and contacts on the Nikonos V type plug of a sync cord. This connector protector is not waterproof and is not intended for use under pressure. Not intended for use with non-Ikelite cords.
$ 12.95
Ikelite SKU: 0301.12 | Helix SKU: 030112
Acetyl cover to protect the o-ring and contacts on the Ikelite plug of a sync cord. This connector protector is not waterproof and is not intended for use under pressure.
$ 14.95
Ikelite SKU: 0200.95 | Helix SKU: 020095
Protective cap for W-30 lens. Cannot be used with the W-20 lens.
$ 14.95
Ikelite SKU: 0200.94 | Helix SKU: 020094
Protective cover for the W-20 lens. Cannot be used with the W-30 lens.
$ 14.95
Ikelite SKU: 0200.93 | Helix SKU: 020093
Protective cover for W-20 and W-30 lenses.
$ 17.95
Ikelite SKU: 0200.92 | Helix SKU: 020092
Removable dust cover for Dry Lock (DL) housings.
$ 14.95
Ikelite SKU: 0200.91 | Helix SKU: 020091
Removable dust cover for Four Lock (FL) housings.
$ 14.95
Ikelite SKU: 0200.83 | Helix SKU: 020083
Two velcro strips attach this clever pouch to the back of the Neoprene Front Cover for 8" Dome Ports to protect the inside of the dome from dust. A durable plastic top zipper opens a compartment to store lubricant, spare o-rings, allen wrenches, and other small parts right where you need them.
Specifications
$ 49.95
Ikelite SKU: 0200.82 | Helix SKU: 020082
The new neoprene cover for the 8" dome has a stretch fit with super-soft lining to provide maximum protection for the most important part of your housing.
Two velcro strips on the back of the cover provide an attachment point for the optional Neoprene Rear Cover for 8" Dome Ports which protects the inside of the dome from dust and doubles as a carrying pouch for lubricant, spare o-rings, allen wrenches, and other small parts.
$ 29.95
Ikelite SKU: 0200.1 | Helix SKU: 02001
Neoprene cover with drawstring to fit Standard 6-inch Dome Port and WD-4 Wide Angle Dome.
$ 17.95
Ikelite SKU: 0200.08 | Helix SKU: 020008
Vinyl covers in a variety of diameters to protect lens ports.
1.75-inch fits the EV Manual Controller.
2-inch fits 46mm threaded lens ports.
3-inch fits most 67mm threaded lens ports found on compact digital and video housings, as well as the Mirrorless Flat Macro Port Standard.
3.9-inch fits compact digital ports which accept the WD-4 Dome, as well as the Modular Flat Front for DSLR housings.
$ 5.00
Ikelite SKU: 0200.06 | Helix SKU: 020006
Vinyl covers in a variety of diameters to protect lens ports.
1.75-inch fits the EV Manual Controller.
2-inch fits 46mm threaded lens ports.
3-inch fits most 67mm threaded lens ports found on compact digital and video housings, as well as the Mirrorless Flat Macro Port Standard.
3.9-inch fits compact digital ports which accept the WD-4 Dome, as well as the Modular Flat Front for DSLR housings.
$ 5.00
Ikelite SKU: 0200.02 | Helix SKU: 020002
Vinyl covers in a variety of diameters to protect lens ports.
1.75-inch fits the EV Manual Controller.
2-inch fits 46mm threaded lens ports.
3-inch fits most 67mm threaded lens ports found on compact digital and video housings, as well as the Mirrorless Flat Macro Port Standard.
3.9-inch fits compact digital ports which accept the WD-4 Dome, as well as the Modular Flat Front for DSLR housings.
$ 5.00
Ikelite SKU: 0200 | Helix SKU: 0200
Vinyl covers in a variety of diameters to protect lens ports.
1.75-inch fits the EV Manual Controller.
2-inch fits 46mm threaded lens ports.
3-inch fits most 67mm threaded lens ports found on compact digital and video housings, as well as the Mirrorless Flat Macro Port Standard.
3.9-inch fits compact digital ports which accept the WD-4 Dome, as well as the Modular Flat Front for DSLR housings.
$ 9.95
Ikelite SKU: 0134.28 | Helix SKU: 013428
Replacement seal for PC-series Halogen or LED light front. Requires light lubrication with Ikelite silicone lubricant, sold separately.
$ 9.95
Ikelite SKU: 0134.23 | Helix SKU: 013423
Replacement seal for PC-series Halogen or LED light front. Requires light lubrication with Ikelite silicone lubricant, sold separately.
$ 14.95
Ikelite SKU: 0132.41 | Helix SKU: 013241
Requires light lubrication with Ikelite silicone lubricant, sold separately.
$ 9.95
Ikelite SKU: 0126 | Helix SKU: 0126
Ikelite O-Ring 0126 for Mini-C Light
$ 9.95
Ikelite SKU: 0124 | Helix SKU: 0124
Replacement seal for C-Light 8 Halogen or LED flashlights.
$ 9.95
Ikelite SKU: 0123 | Helix SKU: 0123
Replacement seal for RCD and Super-8 flashlights.
$ 9.95
Ikelite SKU: 0136.13 | Helix SKU: 013613
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
$ 9.95
Ikelite SKU: 0118 | Helix SKU: 0118
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
$ 9.95
Ikelite SKU: 0117 | Helix SKU: 0117
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
$ 9.95
Ikelite SKU: 0134.12 | Helix SKU: 013412
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
$ 17.95
Ikelite SKU: 0132.61 | Helix SKU: 013261
For select DSLR & Mirrorless housing models. Refer to your housing documentation for compatibility. Lubrication is not required but Ikelite silicone lubricant may be used if needed to clean the o-ring.
$ 19.95
Ikelite SKU: 0110 | Helix SKU: 0110
Replacement seal for certain Ikelite housings for compact digital and mirrorless cameras. Refer to your housing's instruction manual for compatibility.
$ 29.95
Ikelite SKU: 0083.95 | Helix SKU: 008395
Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range. Available with USA, European, UK, or Australian non-interchangeable AC plug. Can be used with a quality travel adapter (not included). This charger is perfect for travel at less than half the size of our previous model smart charger.
For use only with NiMH battery packs for DS161, DS161, and DS125 strobes. Not suitable for use with lithium ion (li-ion) battery packs.
$ 45.00
Ikelite SKU: 0083.94 | Helix SKU: 008394
Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range. Available with USA, European, UK, or Australian non-interchangeable AC plug. Can be used with a quality travel adapter (not included). This charger is perfect for travel at less than half the size of our previous model smart charger.
For use only with NiMH battery packs for DS161, DS161, and DS125 strobes. Not suitable for use with lithium ion (li-ion) battery packs.
$ 45.00
Ikelite SKU: 0083.93 | Helix SKU: 008393
Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range. Available with USA, European, UK, or Australian non-interchangeable AC plug. Can be used with a quality travel adapter (not included). This charger is perfect for travel at less than half the size of our previous model smart charger.
For use only with NiMH battery packs for DS161, DS161, and DS125 strobes. Not suitable for use with lithium ion (li-ion) battery packs.
$ 8.95
Ikelite SKU: 0109 | Helix SKU: 0109
Replacement seal for certain Ikelite housings for compact digital cameras. Refer to your housing's instruction manual for compatibility.
Newer o-rings are red-orange in color. They can be used interchangeably with the black o-rings as long as you select the correct size for your housing.
$ 17.95
Ikelite SKU: 0132.59 | Helix SKU: 013259
For select DSLR & Mirrorless housing models. Refer to your housing documentation for compatibility. Lubrication is not required but Ikelite silicone lubricant may be used if needed to clean the o-ring.
$ 19.95
Ikelite SKU: 0182 | Helix SKU: 0182
Replacement stainless steel lid snap with lock as used on Ikelite DSLR, compact digital, and video camcorder housings. Lid hook and mounting hardware not included.
$ 45.00
Ikelite SKU: 0083.92 | Helix SKU: 008392
Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range. Available with USA, European, UK, or Australian non-interchangeable AC plug. Can be used with a quality travel adapter (not included). This charger is perfect for travel at less than half the size of our previous model smart charger.
For use only with NiMH battery packs for DS161, DS161, and DS125 strobes. Not suitable for use with lithium ion (li-ion) battery packs.
$ 17.95
Ikelite SKU: 0042.58 | Helix SKU: 004258
High-intensity halogen bulb with standard PR-style base. Compatible with Ikelite 8 cell lights including the C-Lite 8 Halogen and Super-8 Halogen.
$ 99.95
Ikelite SKU: 644145 | Helix SKU: 644145
Enhances warm reds and oranges with available sunlight up to 80' (24m). Secures to the outside of the Ikelite lens port offering easy installation and removal.
$ 160.00
Y-shaped sync cord with Ikelite-style plugs on all ends. Supports TTL operation with any compatible system featuring an Ikelite-style electrical bulkhead and two DS strobes. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
This cord is a direct replacement for the prior version # 4103.52. The Ikelite plugs now feature hard anodized aluminum fittings. Overall the cord is significantly lighter while maintaining the same durability as the original nickel plated brass product.
Compatible with all Ikelite housings featuring an electrical bulkhead, Ikelite TTL Converters, and select housings from other manufacturers that have been upgraded with an Ikelite electrical bulkhead.
To connect two strobes to a single housing bulkhead, use a single sync cord # 45151 instead.
Sync Cord
(3) Connector Protector Ikelite end # 0301.12
Silicone Lubricant 1cc 1cc tube
$ 1,695.00
Ikelite SKU: 71706 | Helix SKU: 71706
A full featured and durable waterproof housing for Canon EOS 6D DSLR cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
This housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.
Lens Ports
This housing features our robust new Dry Lock (DL) port system. "Dry Lock" refers to the placement of the o-ring on the outside of the port mount. This improves visibility and reduces the chances of water dropping onto your precious camera sensor. DL ports are the lightest on the market, yet robust and capable of standing up to rough surf. Attachment is quick and secure. A system of extensions can accommodate a huge variety of lenses with ease.
Most popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Refer to the DL System Port Chart to choose the correct gear. Zoom gears sold separately.
Legacy Four Lock Port Compatibility
Due to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed using a T15 Torx bit and replaced with old style Port Locks for FL Port System (Set of 4) # 5509.04 for legacy users with standard or modular ports from our Four Lock system. This modification will prevent the use of newer DL ports. Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and may incur additional service charges. The housing cannot be converted back and forth repeatedly. There are significant advantages to upgrading your lens ports which you can read about here. If you're shooting an 8" diameter dome, you'll also save almost 2 pounds by switching to the DL version.
Vacuum System
The included vacuum valve allows you to pressurize the housing to check for leaks prior to putting your expensive equipment in the water. Use of the vacuum valve requires a compatible Vacuum Pump with Gauge # 47011, sold separately.
There is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.
TTL Exposure
This housings supports your choice of shooting manual strobes or adding TTL electronics depending on your application. Our new modular electronics system allows the housing to be updated with future strobe communications products as they become available. The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations.
You can enjoy the fastest and most accurate TTL exposure on the market by adding the CT1K Canon TTL Kit # 46070 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.
Controls and Set-Up
Shutter and AF-ON levers stand out with super sensitive and natural feeling curved levers. Both controls can be extended using the optional Shutter Trigger Extension # 4077.93 for more comfortable use when using a right-hand quick release handle.
All push button controls are machined and hard anodized aluminum to reduce weight and resist salt build-up. The back of the housing is laser engraved with control symbols which will never fade or fall off.
The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.
Viewfinders
The included Super-Eye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Magnified Viewfinder # 6890 or 45° Magnified Viewfinder (Type 2) # 6891.2. The angle of a 45º viewfinder is more ergonomic when shooting underwater plus it provides a larger and brighter view than the standard Super-Eye.
Handling & Travel
The housing, tray, and handles have been optimized to reduce weight while maintaining strength and durability. The Right-Hand Quick Release Handle # 4077.02 (sold separately) can be added or removed depending on your needs. The precision machined aluminum base features 1/4-20 tripod mounting sockets and additional mounting locations for future accessories. The base and handle can be quickly removed when breaking down your system for travel.
A 1/4-20 threaded mounting point is located front and center on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or GoPro camera.
If you're shooting with two strobe or lighting arms, then a top handle can be added to carry to and from the dive site. Top handles are available in a Cable Grip # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories.
Construction
Our new ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun.
Every housing is made in the USA, individually inspected for fit, and water pressure tested to 200 feet (60m).
Non-Ikelite Strobes
SEA&SEA, INON, and Retra strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.
Ikelite Non-Digital Strobes
Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.
Fiber Optic
Fiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.
Remote Triggering
Strobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter # 4403 or the Water Wizard system (manufactured and sold by Aquatica).
Compatibility
This housing is only compatible with Canon EOS 6D camera as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other DSLR models, including the newer EOS 6D Mark II, from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.
200' (60m) depth rating
Compatible with DL system lens ports
Controls are provided for all important camera controls; Controls are not provided for LCD panel illumination button, Depth-of-field preview button, Dioptric adjustment knob, Multi function lock switch
1/4-20 thread base mounts with 3.5" spacing
Near neutral buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
4.8 lb (2.2 kg)
9.2 x 7.1 x 6.6" (234 x 180 x 168 mm)
Vacuum valve included (pump sold separately)
Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes
ABS-PC construction is fundamentally corrosion-resistant
Made in the USA; Individually inspected for fit and water pressure tested to depth
1 year limited warranty
Housing
Rear O-ring # 0132.59 (installed)
Front O-ring # 0132.45 (installed)
Base with Left-Hand Quick Release Handle # 4077.67
Port Hole Cover # 0200.92 (installed)
Waterproof Bulkhead Cap # 9104.5 (installed)
Zoom Gear Retainer # 75900 (installed)
Tool for Zoom Gear Retainer # 0945.06
4-40 Hex Key # 0945.11
1/16" Hex Key # 0945.16
1/8" Hex Key # 0945.18
Control + Push Button Tip Assortment # 9249
Silicone Lubricant 2cc Tube # 0184.2
$ 1,695.00
A full featured and durable waterproof housing for Panasonic Lumix GH5 and GH5S Mirrorless Micro Four-Thirds cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
200' (60m) depth rating
Perfect for any wet environment including surf, dive, and pool use
Supremely functional for maximum creative control—access is provided for all important camera functions
The new Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses
Extra-large, soft touch zoom knob; Zoom is accessible for many lenses using our unique universal zoom gear system
Vacuum valve included; Test your system after assembly prior to entering the water; Pump sold separately
Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes
Control symbols are laser etched into the back and will never fade or rub off
Quick install camera mount plate does not need to be removed for battery or memory card access
One spare 1/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories
Includes a balanced aluminum base with left-hand quick release handle; Right-hand handle sold separately
Signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel
ABS-PC construction is fundamentally corrosion-resistant
Made in the USA; Individually inspected for fit and water pressure tested to depth
1 year limited warranty
Install optional Panasonic TTL Kit # 46031 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the Panasonic TTL Kit installed, but will not provide TTL exposure.
SEA&SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.
Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.
Fiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.
Strobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).
This housing is only compatible with the Panasonic Lumix GH5 and GH5S Mirrorless Cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.
The GH5 camera body is not compatible in older housings for Panasonic Lumix GH3/GH4 cameras.
This housing comes standard with the new Dry Lock (DL) port mount. Ports designed for our Four Lock (FL) or Two Lock DSLR housings are not compatible with this system. This housing can be converted by the user to the FL system by removing the DL mount and adding four # 9072.24 port locks.
The DL mount is not designed to be removed and replaced repeatedly. Conversion back to the DL system at a later time requires return of the housing to Ikelite for re-installation and water pressure testing.
DL ports are considerably lighter weight than the comparable FL versions and support a more robust mount. The DL system is recommended for surf photography.
200' (60m) depth rating
Compatible with DL system lens ports
Controls are provided for all important camera functions; Controls are not provided for Diopter Adjustment Control, Rear Control Dial, or Mode Dial Lock. Mode Dial must be un-locked prior to installation for use underwater
1/4-20 thread base mounts with 3.5" spacing
Near neutral buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
5.1 lb (2.3 kg)
9.2 x 7.1 x 6.5" (234 x 180 x 165 mm)
Housing
Rear O-ring # 0132.61
Front O-ring # 0132.45
Base with Left-Hand Quick Release Handle # 4077.67
Port Hole Cover # 0200.92
Zoom Gear Retainer # 75900
Waterproof Bulkhead Cap # 9104.5
Silicone Lubricant # 0184.2
Control + Pushbutton Tip Assortment # 9249
1/16" Hex Key # 0945.16
1/8" Hex Key # 0945.18
1 year limited warranty