Atomos Ninja Flame - 4Kp30 Production Monitor - Recorder


Vendor: Atomos


Pin It

Next → ← Previous

Atomos Ninja Flame - 4Kp30 Production Monitor - Recorder

Atomos SKU: ATOMNJAFL2 | Helix SKU: ATOMNJAFL2

Change the way you shoot with Log. Record Log in 4K or HD ProRes/DNxHR from DSLR's with the Ninja Flame's HDMI input and thanks to the AtomHDR engine's combination of 10+ stops dynamic range, 1500nit brightness and 10-bit color processing you can monitor the HDR Log with vivid, natural colors.

Camera Log (S-Log2, S-Log3, C-Log, V-Log etc) delivers maximum sensor detail in your recordings, but on monitors it looks washed out & makes judging exposure difficult. The compromise for filmmakers is to use LUT's to get the approximate "look" but sacrifice detail or use calibration cards, waveform & some “rule of thumb” figures to set exposure correctly. AtomHDR is the solution, accurately displaying HDR Log footage with the brightness to see Log as the eye sees it.

Not all scenes call for HDR Log recording. In situations that don't call for 10 stops of dynamic range, use the intensity of the 1500nit panel to monitor traditional standard dynamic range (SDR/Rec709) video at high brightness for outdoor monitoring..

Simply pick the right mode, HDR or High Bright SDR, and get busy setting up your shot on the premium 7" display boasting 10-bit processing, 1920x1200 resolution, 325ppi pixel density, optional calibration to overcome natural LCD color drift and an arsenal of precision video setup tools for perfect shots every time.

The perfect partner for DSLR and Mirrorless cameras with Log output over HDMI. From gimbal operators to Corporate to Indy filmmakers, your recordings are instantly upgraded to the defacto standard for Hollywood, Indie & Broadcasters (ProRes and DNxHR), ensuring you're not technically rejected in Post and letting you see the detail of your camera's Log on set with natural colors on the calibrated 7" AtomHDR High Bright monitor.

The combination of high capacity media with recording direct from the sensor means that the conventional 30min barrier imposed by many cameras can be bypassed.

Recording 4K and high frame rate HD within the camera might seem enough but unless you record with the right codec you're restricting flexibility in post and even run the risk of having your footage technically rejected. Along with the high pixel density of 4K, the Ninja Flame records higher resolution 10-bit color information, more precise yet efficient 4:2:2 color encoding and to visually lossless, edit-ready codecs like Apple ProRes or AVID DNxHR.

Now you're recording professionally, capturing full individual frames just like film and opening up more creativity in post and grading. Additionally, bypassing internal recording also bypasses the 30min recording barrier found on many Mirrorless/DSLR cameras

Our flexible OS is packed with an extensive suite of scopes, all 1-touch away and simple to use. The Video OS includes tools for focus, framing & exposure (Focus peaking, 2:1/1:1 zoom, Zebra, False Color, Frame guides, SMPTE Safe Area, Waveform, RGB parade, vectorscope) along with a flexible 3D LUT implementation (use built-in LOG to Rec.709 Video or upload .cube files) and options for anamorphic de-squeeze monitoring.

Weight
Without batteries & media 620g / 21.9oz
With batteries & media 1064g / 37.5oz
Dimensions (W x H x D mm) 214 x 127 x 45mm, 8.4 x 5 x 1.8”
Construction High quality lightweight ABS Polycarbonate for durability & portability
Built-in armor protection
Power
Operating power 10 - 24W
Compatible batteries NP-F series and supporting accessories
Input voltage (battery) 6.2V to 16.8V
Battery time (based on 2 x 7.4V batteries) -
5200mAh - up to 1.5hrs (monitor & record 4K 30p)
7800mAh - up to 2.2hrs (monitor & record 4K 30p)
DC In 1 x DC in (6.2 - 16.8V)
Continuous power
* Patent pending
Primary-secondary battery system Change batteries without losing power Loop batteries continuously
Touchscreen
Size 7.1”
Resolution 1920 x 1200
PPI 325
Aspect ratio 16:9 native
Color Gamut REC709 HDTV
Look up table (LUT) support 3D LUT (.cube le format)
Anamorphic de-squeeze 2x, 1.5x, 1.33x, Panasonic 8:3
Technology SuperAtom IPS panel (capacitive touch), calibration to Rec.709 with optional calibration unit
HDR
AtomHDR Yes
Supported Log formats Sony SLog2 / SLog3, Canon CLog / CLog 2, Arri Log C,
Panasonic Vlog, JVC JLog, Red LogFilm, FujiFilm Flog
Supported Gamuts Sony SGamut / SGamut3 / SGamut3.cine
Canon Cinema / BT2020 / DCI P3 / DCI P3+
Panasonic V Gamut
Arri Alexa Wide Gamut
Bit depth 10-bit (8+2 FRC)
Brightness 1500nit (+/- 10% @ center)
HDR input (PQ/HLG)
HDR output (PQ/HLG)
Yes / Yes
Yes / Yes
Video Input/Loop Out
HDMI 1 x HDMI (1.4b)
SDI -
Signal Uncompressed true 10-bit or 8-bit 422
(camera dependent)
Video Output (Play Out)
HDMI 1 x HDMI (1.4b)
SDI -
Signal Uncompressed true 10-bit or 8-bit 422
(playback file dependent)
Supported Loop Out Formats
HDMI to HDMI 720p 50/60, 1080i 50/60,
1080p 24/25/30/50/60/120,
2160p 24/25/30
SDI to SDI
Video Signal Conversion
HDMI to SDI
SDI to HDMI
Supported Codecs & Frame Rates (Record & Playback)
Raw to CDNG (Record only)* N/A
Raw to ProRes / DNxHR N/A
Video to ProRes / DNxHR Codecs Apple ProRes HQ, 422, LT
AVID DNxHR HQX. HQ, SQ, LB

Frame rates 4K UHD; 24/25/30
1080p; 24/SF24/25/SF25/30/SF30/50/60/100/120
1080i; 50/60i
720p; 50/60p
Onboard Processing
Pulldown removal 24/25/30pSF > 24/25/30p (2:2 pulldown)
60i > 24p (3:2 pulldown)
4K UHD downscale for HD monitoring Yes - Loop-out and playback
Audio In/Out (48kHz PCM Audio)
HDMI 2 or 8ch 24-bit, camera dependent
SDI -
Audio Line in / Mic in / Headphone out 2ch 48kHz 24-bit
Remote Start/Stop
HDMI Auto HDMI Trigger
Supported Protocols - Canon, Sony, Atomos Open Standard
SDI -
Other LANC control - Slave
Playback
Playlist / Genlock / LTC Yes / No / No
CDNG (Recorded content) N/A
ProRes (Recorded content) All recorded files can playback. Playback in slow motion >= 100fps
DNxHR / DNxHD (recorded content) All recorded files can playback. Playback in slow motion >= 100fps
Recording
Pre-roll record Yes (HD 8s, 4K 2s)
Custom timelapse Yes
Meta data tagging Yes (10 tags available)
Supported media 2.5” SSD/HDD compatibility depends on recording format, resolution and frame rate. Visit atomos.com/drives for list of tested and approved drives
Master caddy case Master Caddy II (included)
75mm x 105mm x 12mm
Master caddy dock 2.5” SATA to USB 2.0/3.0
Supported applications FCPX/FCP7+ / Media Composer
5.0+ / Premiere 5.5+
EDIUS 6.0+ / Vegas Pro 10+ / Lightworks /
Autodesk Smoke 2015
XML support FCPX XML native, FCP7 supported with
conversion (Adobe compatible)
Accessories included Ninja Flame unit, Master Caddy II x 1, 
12V-3A AC power supply
Optional extras Accessory Kit: 2 x battery, 1 x charger,
1 x power supply, HPRC case, USB dock, control cable, 
Dtap cable, Master Caddy x 4, Power supply, Sun hood 

Power Kit: 2 x battery, 1 x charger,
1 x power supply

Other: Atomos HDMI cable, 
X-Rite i1DisplayPro calibration

All specifications correct when published, subject to E&OE.

* Available in future firmware updates