Ikelite DS-160 Strobe Front Only


Vendor: Ikelite


Pin It

Next → ← Previous

Ikelite DS-160 Strobe Front Only - 40602

Ikelite Product Number 4060.2
Product Details

This strobe front is compatible with NiCad, NiMH, and Li-ion battery packs as featured on our DS125 and DS161 strobes. Battery pack sold separately.

The DS160 combines power with wide angle coverage to give you the most bang for your buck.

The quality of light is exceptional due to a round flash tube and custom powder coated reflector designed specifically to deliver the softest, most even coverage possible. Strobes with a straight flashtube may be capable of high powers, but require the addition of a diffuser to spread out their sharp, rectangular beam pattern and reduce the harsh hot spot. The DS160 beam is designed to be perfectly soft and wide spread through its reflector design, and is capable of providing you the coverage and power you want and avoiding the one f/stop loss caused by adding a diffuser.

Both our DS160 and DS161 strobes are legendary for their ability to keep up in rapid firing situations—a cut above any flash on the market. Electrical sync connection and a high-capacity battery pack provide the speed you need to capture fast moving subjects like sharks and sailfish at just the right millisecond.

When combined with a compatible TTL system, the DS160 automatically adjusts brightness to provide perfect exposure whether you're shooting macro, portrait or wide angle. Focus on your camera settings and composition and enjoy the increased number of flashes and even faster recycle time you'll get when working with a TTL system.

A bright, concentrated LED aiming light provides more than enough light for focusing or as a night diving light. The LED turns off and on when the strobe is fired, ensuring that no bright spots will ruin your photo.

The DS160 strobe output is identical to its sister model, the DS161. The DS161 features a built-in 500 lumen video light in place of the DS160's aiming light.

Battery Compatibility

A battery pack is required for operation of this strobe front. Battery pack sold separately. Use only working Ikelite Li-ion (Product Number 4067.2, Product Number 4067), NiMH (Product Number 4066.5), or NiCad (Product Number 4066) battery packs. Please note that older battery packs may not provide optimal number of flashes per charge or recycle times. Use of a flooded or damaged battery pack with this strobe front may cause damage which is not covered by warranty. If you are experiencing problems with your strobe functioning, we recommend trying a new battery pack prior to returning for service.

Our proprietary quick-release toggle system attaches the battery pack with ease and confidence, making a flooded battery virtually impossible. The size of the DS160 is uniquely balanced to its weight to provide near neutral buoyancy in salt water.

What's Included
  • DS160 strobe front
  • Diffuser
  • Waterproof bulkhead cap
  • Silicone lubricant 1cc tube
  • 2 year limited warranty
Specifications
  • 300 ft (90 m) depth rating
  • TTL mode with compatible Ikelite TTL systems
  • Manual power modes in 10 1/2-stop increments
  • 205 lumen LED aiming light
  • Color temperature 4800K
  • Guide number 24 m at ISO 100
  • Coverage angle 90° without diffuser - 100° with diffuser
  • Over 450 full power flashes per charge (Li-Ion)
  • Over 225 full power flashes per charge (NiMH)
  • Up to 3X as many flashes per charge in TTL or fractional powers
  • Recycle time 1.4 sec or less (Li-Ion)
  • Recycle time 1.6 sec or less (NiMH)
  • Ikelite ICS 5-pin bulkhead
  • Near neutral buoyancy in salt water when used with a li-ion battery pack
Spare Parts
0591.3 Diffuser
0132.36 Battery pack o-ring
9104.5 Waterproof bulkhead cap
Documentation
    Trust Guard Security Scanned