Ikelite DLM Mirrorless 2.2-inch Lens Extension
$ 219.95
Ikelite DLM Mirrorless 2.2-inch Lens Extension - IK551670
Ikelite DLM Standard Flat Port
$ 249.95 - Sold Out
Ikelite DLM Standard Flat Port - IK551645
A low-volume flat port for use with most shorter length mirrorless interchangeable macro lenses. See Mirrorless Port System section to view lens compatibility.
Ikelite DLM Superwide 6 inch Dome Port
$ 350.00 - Sold Out
Ikelite DLM Superwide 6 inch Dome Port - IK551611
A low-volume dome port for use with interchangeable super wide angle and fisheye lenses. See Mirrorless Port System section to view lens compatibility.
Ikelite Dome Diffuser for DS161, DS160, DS125 Strobes
$ 79.95
Ikelite Dome Diffuser for DS161, DS160, DS125 Strobes
Ikelite SKU: 4069.2 | Helix SKU: 40692
Overview
This domed diffuser for DS161, DS160, and DS125 type strobes provides the softest, widest coverage possible. This combination of material and shape spreads light wider than a traditional diffuser and has a higher transmissivity to let more light through.
There is no cooling effect so the warm, natural glow of your DS160-series strobe is preserved.
Attaches to the front of your strobe with a secure, press fit. Lanyard ring and lanyard included.
Specifications
120° circular beam angle
-0.5 f/stop loss
What's in the Box
Diffuser
Lanyard # 0321.11
Ikelite Dome Shade for the Nikon 20mm Lens
$ 29.95 - Sold Out
Ikelite Shade for FL Dome for Nikon 20mm D - 550420
This shade features a lower side profile to reduce or eliminate vignetting with select wide angle lenses. Replaces the standard dome shade found on most fixed dome ports with just three screws.
Ikelite Double 1.25 in Ball Arm for DS Strobes
$ 284.95
Ikelite Double 1.25 in Ball Arm for DS Strobes - 408527
This complete arm kit is everything you need to position your strobe for any shot - wide angle to macro! Kit features our largest, 1.25 in (3.2 cm) diameter, balls for maximum holding power. Nituff anodized aluminum components are lightweight and corrosion-resistant. Includes ball at release handle, one 6 in (15 cm) length extension, one 9 in (22 cm) length extension, three clamps, and mount for Ikelite DS50, DS51, DS125, DS160 or DS161 strobe.
Ikelite DS-160 Strobe Front Only
$ 599.95 - Sold Out
Ikelite DS-160 Strobe Front Only - 40602
Ikelite DS160 Strobe NiMH Battery (UNITED KINGDOM)
$ 799.00 - Sold Out
Ikelite DS160 Strobe NiMH Battery (UNITED KINGDOM) - IK4060UK
Ikelite DS160 Strobe with NiMH Battery (AUSTRALIAN)
$ 799.00 - Sold Out
Ikelite DS160 Strobe with NiMH Battery (AUSTRALIAN) - IK4060AU
Ikelite DS160 Strobe with NiMH Battery (EUROPEAN)
$ 799.00
Ikelite DS160 Strobe with NiMH Battery (EUROPEAN) - IK4060EU
Ikelite DS160 Strobe with NiMH Battery (USA)
$ 799.00 - Sold Out
Ikelite DS160 Strobe with NiMH Battery (USA) - IK4060US
Ikelite DS161 Strobe & Video Light Front Only
$ 749.95 - Sold Out
Ikelite DS161 Strobe & Video Light Front Only - 40612
Ikelite DS161 Strobe & Video Light NiMH Battery (AUSTRALIAN)
$ 949.00 - Sold Out
Ikelite DS161 Strobe & Video Light NiMH Battery (AUSTRALIAN) - IK4061AU
Ikelite DS161 Strobe & Video Light with NiMH Battery (EUROPEAN)
$ 949.00 - Sold Out
Ikelite DS161 Strobe & Video Light with NiMH Battery (EUROPEAN) - IK4061EU
Ikelite DS161 Strobe & Video Light with NiMH Battery (USA)
$ 949.00 - Sold Out
Ikelite DS161 Strobe & Video Light with NiMH Battery (USA) - IK4061US
Ikelite DS161 Strobe Kit with Sync Cord + Arm / NiMH 4061.35
$ 1,399.95 - Sold Out
Ikelite DS161 Strobe Kit with Sync Cord + Arm / NiMH
The DS161 combines power with wide angle coverage to give you the most bang for your buck. This kit provides everything you need to add a strobe to any Ikelite TTL system for Compact Digital, Mirrorless, or DSLR camera.
The quality of light is exceptional due to a round flash tube and custom powder coated reflector designed specifically to deliver the softest, most even coverage possible. Strobes with a straight flashtube may be capable of high powers, but require the addition of a diffuser to spread out their sharp, rectangular beam pattern and reduce the harsh hot spot. The DS161 beam is designed to be perfectly soft and wide spread through its reflector design, and is capable of providing you the coverage and power you want and avoiding the one f/stop loss caused by adding a diffuser.
DS160 and DS161 strobes are legendary for their ability to keep up in rapid firing situations—a cut above any flash on the market. Electrical sync connection and a high-capacity battery pack provide the speed you need to capture fast moving subjects like sharks and sailfish at just the right millisecond.
When combined with a compatible TTL system, the DS161 automatically adjusts brightness to provide perfect exposure whether you're shooting macro, portrait or wide angle. Focus on your camera settings and composition and enjoy the increased number of flashes and even faster recycle time you'll get when working with a TTL system.
Ikelite DS161 STROBE NIMH ( UNITED KINGDOM ) (4061UK)
$ 949.00 - Sold Out
Ikelite DS161 Strobe & Video Light with NiMH Battery (UNITED KINGDOM) - IK4061UK
Ikelite DS51 Underwater Strobe
$ 449.95
Ikelite DS51 Underwater Strobe
Ikelite SKU: 4044.1 | Helix SKU: 40441
Overview
The size and weight of the DS51 make it the perfect choice for the traveling underwater photographer. The DS51's intensity and angle of coverage are comparable to any strobe in its class.
The strobe can easily switch between TTL/Auto and any of the six manual power settings through a large, easy-to-turn dial on the rear of the strobe.A simple battery door is easy to remove and replace and provides a clear view of the o-ring seal. The strobe's battery compartment is independently sealed from the electronics preventing further damage in the event of a flood.
When combined with a compatible Ikelite digital TTL system or film TTL system, the DS51 automatically adjusts brightness to provide perfect exposure whether you're shooting macro, portrait or wide angle.
Specifications
300 ft (90 m) depth rating
TTL mode with compatible Ikelite TTL systems
Manual power modes in 6 1/2-stop increments
Color temperature 5700K
Guide number 17 m at ISO 100
Coverage angle 70° without diffuser - 80° with diffuser
Recycles in 3.5 seconds or less
Accepts 4 AA cell Alkaline, Li-ion, NiMH or NiCad batteries (not included)
Dimensions 3.2 x 4.7 in (81 x 119 mm)
Weight 20 oz (590 g)
Neutral buoyancy in fresh water
In the Box
DS51 strobe
1" Ball Mount # 4081.4
Diffuser # 0561.2
Waterproof Bulkhead Cap # 9104.5
Silicone Lubricant 1cc tube
2 year manufacturer warranty
Documentation
Ikelite DSLR Ball Mount Kit for Gamma
$ 79.95
Ikelite DSLR Ball Mount Kit for Gamma - 18871
Based on our popular SA-100 1in (2.5 cm) diameter ball socket arm system, this mount kit includes everything you need to use your Gamma as a focus assist or macro video light. Compatible with Ikelite DSLR housings featuring a top mount. Gamma flashlight not included.
Ikelite DSLR Flex Mount Kit for Gamma
$ 59.95
Ikelite DSLR Flex Mount Kit for Gamma - 18872
This mount kit is super lightweight, flexible, and includes everything you need to use your Gamma as a focus assist or macro video light. Compatible with Ikelite DSLR housings featuring a top mount. Gamma flashlight not included.
Ikelite Dual AF35 Tray with T-Mount
$ 39.95 - Sold Out
Ikelite Dual AF35 Tray with T-Mount - 952345
A dual tray designed to combine the AF35 strobe kit with a secondary lighting accessory.
Ikelite Dual AF35 Tray with T-Mount and Flex Ball
$ 59.95 - Sold Out
Ikelite Dual AF35 Tray with T-Mount and Flex Ball - 952344
A dual tray designed to combine the AF35 strobe kit with a secondary lighting accessory.
Ikelite Featherweight Single Tray with Flex Mount
$ 39.95 - Sold Out
Ikelite Featherweight Single Tray with Flex Mount - 952341
Ikelite Fiber Optic 1in Ball Arm Kit
$ 324.95
Ikelite Fiber Optic 1in Ball Arm Kit - 407004
Use this kit to attach any DS strobe to a fiber optic housing system. The Ikelite Fiber Optic Adapter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. A universal mount kit is included to add fiber optic ports to almost any clear body housing. Strobe not included.
Ikelite Fiber Optic Coiled Cord
$ 80.00
Ikelite Fiber Optic Coiled Cord - 4501
Features multi-core fiber optic cable for optimum signal transmission and built-in strain relief. Compatible with Fiber Optic Adapter for DS strobes and any Ikelite housing featuring fiber optic ports. Also compatible with SEA&SEA- and Olympus-type fiber optic connections.
Ikelite Fiber Optic Converter for DS Strobes (3rd Gen)
$ 125.00
Ikelite Fiber Optic Converter for DS Strobes (3rd Gen)
Ikelite SKU: 4401.3 | Helix SKU: 44013
Overview
Converts the electrical bulkhead of any Ikelite DS strobe into a fiber optic port.
Updates
This 3rd Generation of the Fiber Optic Converter features a hard anodized aluminum plug connection which reduces weight without sacrificing durability. It is recommended for use with any Ikelite strobe produced September 2018 or later with a hard anodized aluminum bulkhead.
Like the 2nd Generation model, this Fiber Optic Converter features heightened sensitivity for use with SEA&SEA or Nauticam housings with internal electrical-to-optical flash triggering devices. These devices translate the camera's electrical signals into a series of LED flashes which are much less bright than a traditional built-in camera flash. The Fiber Optic Converter is also compatible with any system where the camera's built-in flash can be seen by a fiber optic cord.
Attachment and Use
The Converter simply attaches to the strobe's electrical bulkhead in place of a sync cord connector. The enlarged slave window provides approximately 90 degrees field of view for remote triggering.
The Fiber Optic Converter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. Simply turn on your strobe and take one picture to configure. This adapter is a manual exposure (non-TTL) trigger only. The strobe's output may be adjusted using the manual power settings built into the strobe (varies by model).
An individual Fiber Optic Converter and compatible cord is needed for each strobe. Use of two strobes requires two Fiber Optic Converters.
This converter attaches to an Ikelite DS strobe. It is not intended to be attached to a housing and will provide no functionality if attached to an Ikelite bulkhead in a housing.
Alternatives
There are two shooting scenarios where the High Sensitivity Optical Slave Converter # 4405 would be a better option:
- If you're shooting a DSLR or mirrorless camera with Nauticam fiber optic converter and want to shoot at a higher frame rate (4 FPS or faster).
- If your primary purpose is to trigger your strobes remotely at a distance from the housing without a fiber optic cable in between.
Ikelite FL 6 inch Dome for Lenses Up To 2.5 Inches
$ 249.95 - Sold Out
Ikelite FL 6 inch Dome for Lenses Up To 2.5 Inches - IK550315
For lenses with a 110 to 170 degrees angle of coverage. Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry. Domes are recommended for lenses 28mm and wider to preserve the full angle of coverage. Zoom lenses that do not focus to 12 inches (30 cm) require a +4 diopter close-up lens.
Accommodates lenses up to 2.5-inch (6.3 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility. This port does not allow use of a dome shade.
Ikelite FL 6 inch Dome for Lenses Up To 3 Inches
$ 249.95
Ikelite FL 6 inch Dome for Lenses Up To 3 Inches - 5503
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry. Domes are recommended for lenses 28mm and wider to preserve the full angle of coverage. Zoom lenses that do not focus to 12 inches (30 cm) require a +4 diopter close-up lens.
Accommodates lenses up to 3-inch (7.6 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL 6 inch Dome for Lenses Up To 4 Inches
$ 249.95 - Sold Out
Ikelite FL 6 inch Dome for Lenses Up To 4 Inches - 550350
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry. Domes are recommended for lenses 28mm and wider to preserve the full angle of coverage. Zoom lenses that do not focus to 12 inches (30 cm) require a +4 diopter close-up lens.
Accommodates lenses up to 4-inch (10.1 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL 6 inch Dome for Lenses Up To 4.5 Inches
$ 249.95 - Sold Out
Ikelite FL 6 inch Dome for Lenses Up To 4.5 Inches - 550355
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry. Domes are recommended for lenses 28mm and wider to preserve the full angle of coverage. Zoom lenses that do not focus to 12 inches (30 cm) require a +4 diopter close-up lens.
Accommodates lenses up to 4.5-inch (11.4 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL 6 inch Dome for Lenses Up To 5 Inches
$ 249.95
Ikelite FL 6 inch Dome for Lenses Up To 5 Inches - 550380
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry. Domes are recommended for lenses 28mm and wider to preserve the full angle of coverage. Zoom lenses that do not focus to 12 inches (30 cm) require a +4 diopter close-up lens.
Accommodates lenses up to 5-inch (12.7 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL Dome Port for Nikon 18-105mm
$ 249.95 - Sold Out
Ikelite FL Dome Port for Nikon 18-105mm - 55382
This port is designed specifically for the Nikkor 18-105mm f/3.5-5.6G ED VR AF-S DX lens. This lens requires the addition of a +4 close-up lens to focus properly behind a dome underwater. Close-up lens not included.
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry.
Ikelite FL Dome Port for Tokina 12-24mm
$ 249.95 - Sold Out
Ikelite FL Dome Port for Tokina 12-24mm - 550351
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry. Domes are recommended for lenses 28mm and wider to preserve the full angle of coverage.
Zoom is operable using the Large Diameter Zoom Set, included with all Ikelite DSLR housings. A +2 close-up lens is not required, but may be added to improve edge sharpness. Auto-focus only.
Ikelite FL Extension for Lenses Up To 4.125 Inches
$ 250.00 - Sold Out
Ikelite FL Extension for Lenses Up To 4.125 Inches - 551022
Ikelite FL Extension for Lenses Up To 4.25 Inches
$ 174.95 - Sold Out
Ikelite FL Extension for Lenses Up To 4.25 Inches - 551024
Ikelite FL Extension for Lenses Up To 5.1 Inches
$ 275.00 - Sold Out
Ikelite FL Extension for Lenses Up To 5.1 Inches - 551028
Ikelite FL Flat Port For Lenses Up To 2.5 Inches
$ 149.95
Ikelite FL Flat Port For Lenses Up To 2.5 Inches - 5501
Flat ports are recommended for standard, macro and telephoto lenses. Due to refraction, flat ports reduce the angle of coverage of a lens and magnify the image. This makes the flat port ideal when using standard, macro or zoom lenses to shoot small subjects.
Note that if a port is long enough to accommodate the full length of a 1:1 macro lens, the lens may vignette when used at infinity. If access to the lens' full range is desired, then select a dome port instead.
Accommodates lenses up to 2.5-inch (6.3 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL Flat Port For Lenses Up To 3.5 Inches
$ 149.95
Ikelite FL Flat Port For Lenses Up To 3.5 Inches - 5502
Flat ports are recommended for standard, macro and telephoto lenses. Due to refraction, flat ports reduce the angle of coverage of a lens and magnify the image. This makes the flat port ideal when using standard, macro or zoom lenses to shoot small subjects.
Note that if a port is long enough to accommodate the full length of a 1:1 macro lens, the lens may vignette when used at infinity. If access to the lens' full range is desired, then select a dome port instead.
Accommodates lenses up to 3.5-inch (8.9 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL Flat Port For Lenses Up To 4.5 Inches
$ 199.95
Ikelite FL Flat Port For Lenses Up To 4.5 Inches - 5505
Flat ports are recommended for standard, macro and telephoto lenses. Due to refraction, flat ports reduce the angle of coverage of a lens and magnify the image. This makes the flat port ideal when using standard, macro or zoom lenses to shoot small subjects.
Note that if a port is long enough to accommodate the full length of a 1:1 macro lens, the lens may vignette when used at infinity. If access to the lens' full range is desired, then select a dome port instead.
Accommodates lenses up to 4.5-inch (11.4 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL Flat Port For Lenses Up To 5.5 Inches
$ 199.95
Ikelite FL Flat Port For Lenses Up To 5.5 Inches - 55055
Flat ports are recommended for standard, macro and telephoto lenses. Due to refraction, flat ports reduce the angle of coverage of a lens and magnify the image. This makes the flat port ideal when using standard, macro or zoom lenses to shoot small subjects.
Note that if a port is long enough to accommodate the full length of a 1:1 macro lens, the lens may vignette when used at infinity. If access to the lens' full range is desired, then select a dome port instead.
Accommodates lenses up to 5.5-inch (14.0 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL Flat Port For Lenses Up To 6.1 Inches
$ 199.95 - Sold Out
Ikelite FL Flat Port For Lenses Up To 6.1 Inches - 550558
Flat ports are recommended for standard, macro and telephoto lenses. Due to refraction, flat ports reduce the angle of coverage of a lens and magnify the image. This makes the flat port ideal when using standard, macro or zoom lenses to shoot small subjects.
Note that if a port is long enough to accommodate the full length of a 1:1 macro lens, the lens may vignette when used at infinity. If access to the lens' full range is desired, then select a dome port instead.
Accommodates lenses up to 6.1-inch (15.5 cm) long and 3.3-inch (8.4 cm) in diameter. Measure your lens or use our Port Finder to determine compatibility.
Ikelite FL Port for Nikon 28-105mm D
$ 249.95 - Sold Out
Ikelite FL Port for Nikon 28-105mm D - 550381
This port is designed specifically for the Nikkor 28-105mm 1:3.5-4.5D Macro lens. A control is provided to switch between Normal and Macro focal ranges. This lens requires the addition of a +4 close-up lens to focus properly behind a dome underwater. Close-up lens not included.
Ikelite acrylic domes are injection molded specifically for underwater photography, and represent the finest optics in the industry.
Ikelite Flex Arm & TTL Sync Cord Kit
$ 149.95
Ikelite Flex Arm & TTL Sync Cord Kit - 407011
Ikelite Flex Arm Adapter 1/2-to-3/4 inch
$ 12.00
Ikelite Flex Arm Adapter 1/2-to-3/4 inch
Ikelite SKU: 0565.54 | Helix SKU: 056554
Overview
Use to transition between 1/2-inch and 3/4-inch flex arm components. Features male fitting on 1/2-inch end and female fitting on 3/4-inch end.
Ikelite Flex Arm for DS51
$ 49.00 - Sold Out
Ikelite Flex Arm for DS51 - 408721
One of our most popular strobe arms pre-assembled and ready to be attached to your DS50 or DS51 strobe. A great start to any system, providing flexibility to shoot both wide angle and macro photography. Includes flex ball at release handle, flex ball at Micro Tray or DSLR top mount, 12 pieces of 3/4 flex arm extension and mount at DS50 or DS51 type strobe.
Ikelite Flex Light Arm For Action Tray
$ 39.95
Ikelite Flex Light Arm For Action Tray
Ikelite SKU: 4087.26 | Helix SKU: 408726
Overview
A lightweight and flexible arm for the Action Tray II for compact digital housings. The 8.5" (216mm) long flex arm accepts any light mount which is compatible with 1/2" Loc-line flex components, including the 1/2" flex mounts offered by Light & Motion. Mounting of strobes or larger video lights is not recommended. To mount a strobe, use the Flex DS51 Strobe Arm for Action Tray product # 4087.27 instead.
This arm can be attached to the top of a Quick Release Handle using the # 9573.31 mount.
Ikelite Flex Mount for AF35 & Featherweight Tray
$ 20.00 - Sold Out
Ikelite Flex Mount for AF35 & Featherweight Tray - 95735
Mounts to the Featherweight Tray or AF35 strobe tray.
Ikelite Flex Mount for Gamma
$ 19.95
Ikelite Flex Mount for Gamma
Ikelite SKU: 1882 | Helix SKU: 1882
Overview
Based on our popular flex arm system, this mount kit includes everything you need to attach your Gamma to a 1/2 in or 3/4 in flex arm. Gamma flashlight not included.
