$ 449.95 - Sold Out
Fuji SKU: 16514118 | Helix SKU: FJ16514118
With cameras equipped with a focal plane shutter, when the shutter speed is high, the first and second shutter curtains move across at the same time, making the exposure through a narrow vertical slit between them. Because of this, light from a conventional flash can only reach a small section of the sensor. This is why a slower shutter speed must be used in flash photography, with the range of available shutter speeds severely limited.
EF-X500 supports the FP mode (high-speed flash sync), in which the flash outputs continuous light while the first and second curtains travel across the sensor, thereby enabling flash photography at any shutter speed.
When shooting with a near-maximum aperture to create beautiful bokeh, the shutter speed tends to go higher. This flash mode frees photographers from having to be conscious about shutter speed limitations, and instead allows them to focus on shooting.
EF-X500 can be used in multi-flash setup to freely control light on a subject and background for a creative result. TTL lighting control is available with single flash and also in the multi-flash setup, so that you can start shooting without having to make cumbersome adjustments to light output.
Multiple flashes can be controlled in up to three groups, each of which can be set up to have different light output, allowing you to fine-tune the space of light. As the light output can also be adjusted from the camera, you don’t need to set it down for lighting control.
Dust-resistant and water-resistant capabilities expanding the scope of photographic fields when used with X Series cameras
The front side of EF-X500's main body is applied with leather texture to compliment the design of the X Series cameras. It is designed with low center of gravity to maintain ease of operation when mounted on the X Series cameras, known for their lightweight and compact bodies.
The external battery pack "EF-BP1" takes eight AA batteries to shorten charging time and improve the number of flashes per charge.
Type |
|
---|---|
Flash head |
|
Exposure control |
|
Charge |
|
Wireless multi-flash system |
|
Other functions |
|
Included items |
Soft case |
Power source |
|
Dimensions and weight |
|
$ 249.95 - Sold Out
$ 599.95 $ 549.95 - Sold Out
Nikon SKU: 4815 | Helix SKU: NK4815
$ 329.95 $ 299.95 - Sold Out
Nikon SKU: 4808 | Helix SKU: NK4808
$ 149.95 - Sold Out
ProMaster SKU: 1700 | Helix SKU: PR1700
The ProMaster 100SL for Fuji X sports a full complement of advanced features in a small form factor. Its hybrid design gives you the option of an LED light for videos or flash for still photos. The 100SL is well-balanced so it 'just feels right' on your camera while throwing a flattering quality of light towards your subject. A built-in USB port is useful for future firmware upgrades. The 100SL for Fuji X can also be used as a wireless manual slave flash.
The 100SL for Fuji X features include:
+ LED light for videography
+ LED catchlight for still photography
+ Swivel and bounce
+ 22 levels of light output control
+ Auto FP (HSS) high-speed sync (with supporting cameras)
+ Thermal cut-off protection
+ Quick release camera connection
+ Wireless manual functionality (non-TTL)
+ 1st and 2nd curtain sync
+ Stroboscopic Mode
- Guide number: 100 (100' / 30m at extended/50 mm reflector position, ISO 100)
- Bounce positions: 0o, 60o, 75o, 90o
- Swivel positions: Right 0o - 90o; Left 0o - 180o
- Flash coverage: 24 - 50 mm (manual)
- Flash duration: 1/800 - 1/20,000 second
- Color temperature: 5600 K
- Exposure compensation: +/- 5 EV in 1/3 EV increments
- Recycling time: Alkaline cells 0.27 - 5 seconds; NiMH cells 0.15 - 2 seconds
- Dimensions: 5 1/2" x 2 3/4" x 2" / 140 mm x 70 mm x 50 mm
- Weight: 9 3/4 oz / 27 g (without batteries)
- Power source: 4 x 1.5 V AA alkaline batteries or 4 x 1.2 V NiMH batteries
$ 239.95
ProMaster SKU: 8574 | Helix SKU: PR85742
The ProMaster 200ST-R Speedlight works with your camera to provide powerful light, TTL exposure, and a wide range of advanced features including HSS high-speed sync, second curtain sync, and more. The articulating head can be adjusted for a variety of swivel and bounce positions; and is compatible with many light modifiers. The 200ST-R's powerful guide number of 60m/200ft combined with 200mm zoom head can illuminate subjects from afar. The built-in wireless 2.4 GHz radio TTL system provides expanded off-camera lighting options when commanded by a ProMaster ST1 transceiver. Wireless non-TTL (F1 and F2 modes) optical slave is also on-board.
+ Guide Number: (ISO 100) 60 m / 200’ at 200 mm zoom head position
+ Flash Coverage: 24 - 200 mm (18 mm with built-in wide panel) Auto/Manual Zoom
+ Bounce / Swivel Flash Head
Bounce Positions: -7º, 0º, 45º, 60º, 75º, 90º
Swivel Positions: Right 0º, 30º, 60º, 90º, 120º, 150º, 180º ;
Left 0º, 30º, 60º, 90º
+ Manual Output Power Range: 1 - 1/128
+ Flash Duration: 1/800 - 1/20,000 second
+ Color Temperature: 5600K
+ Exposure Compensation: +/- 3 EV in 1/3 EV increments
+ Wireless Slave Mode: 2.4 GHz radio, 15 channels + auto, 5 groups A/B/C/D/E
+ Wireless Range: 325’ / 100 m
+ Recycling Time: Alkaline cells 0.27 - 5.2 s ; NiMH cells 0.15 - 3 seconds
+ Net Weight: 15 oz / 425 g (without batteries)
+ Dimensions: 7 ¾" x 3 1/16 " x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
+ Power Source: 4 x 1.5V AA alkaline batteries, 4 x 1.2V NiMH
batteries, optional HV external power supply
+ Maximum output power: 500 lx-s at 10' / 3m (at 200mm zoom position)
+ ProMaster 3717 USB firmware downloading cable for computer connection
Flash Case
Flash Stand
Flash Diffuser
Fluorescent Filter (Green)
Incandescent Filter (Amber)
Instruction Manual
$ 249.95
ProMaster SKU: 8588 | Helix SKU: PR85889
The ProMaster 200ST-R Speedlight works with your camera to provide powerful light, TTL exposure, and a wide range of advanced features including HSS high-speed sync, second curtain sync, and more. The articulating head can be adjusted for a variety of swivel and bounce positions; and is compatible with many light modifiers. The 200ST-R's powerful guide number of 60m/200ft combined with 200mm zoom head can illuminate subjects from afar. The built-in wireless 2.4 GHz radio TTL system provides expanded off-camera lighting options when commanded by a ProMaster SM1S Speedlight Master Transmitter. Wireless non-TTL (F1 and F2 modes) optical slave is also on-board.
+ Guide Number: (ISO 100) 60 m / 200’ at 200 mm zoom head position
+ Flash Coverage: 24 - 200 mm (18 mm with built-in wide panel) Auto/Manual Zoom
+ Bounce / Swivel Flash Head
Bounce Positions: -7º, 0º, 45º, 60º, 75º, 90º
Swivel Positions: Right 0º, 30º, 60º, 90º, 120º, 150º, 180º ;
Left 0º, 30º, 60º, 90º
+ Manual Output Power Range: 1 - 1/128
+ Flash Duration: 1/800 - 1/20,000 second
+ Color Temperature: 5600K
+ Exposure Compensation: +/- 3 EV in 1/3 EV increments
+ Wireless Slave Mode: 2.4 GHz radio, 15 channels + auto, 3 groups A/B/C (up to 15 units in a group)
+ Wireless Range: 325’ / 100 m
+ Recycling Time: Alkaline cells 0.27 - 5.2 s ; NiMH cells 0.15 - 3 seconds
+ Net Weight: 15 oz / 425 g (without batteries)
+ Dimensions: 7 ¾" x 3 1/16 " x 2 5/16" (196.8mm x 77.8mm x 58.7mm)
+ Power Source: 4 x 1.5V AA alkaline batteries, 4 x 1.2V NiMH batteries, optional HV external power supply
+ Maximum output power: 500 lx-s at 10' / 3m (at 200mm zoom position)
+ ProMaster 3717 USB firmware downloading cable for computer connection
Flash Case
Flash Stand
$ 9.95
Promaster Diffuser for Nikon SB700 Speedlite A diffuser creates a softer, more even light from your electronic flash. PROMASTER Custom Fit Flash Diffusers attach without the assistance of velcro or tape. Slip On dedicated flash diffuser for the Nikon SB-700 Speedlite
$ 149.99 $ 139.99
Sony SKU: HVL-F20M | Helix SKU: SYHVLF20M
Compact and slim with a body that’s only 0.94" thick, but packed with advanced lighting features. Its guide number of 20 (GN203) makes it about two or three times brighter than a built-in flash. Powerful enough to illuminate subjects up to 16.4 feet away (TELE position, ISO 100, F4), it will expand your shooting possibilities.
The flashlight is diffused by being bounced off the ceiling, resulting in natural lighting with soft shadows. The flash position is easily adjusted via a slide switch. Simply rotating the flash head upwards 75 ° enables bounce flash for more natural-looking illumination of your subject.
Attach to a compatible camera and use this flash unit to wirelessly control other compatible flash units.
Control the ideal combination of shutter speed and flash intensity for precisely the effect you are looking for.
Incorporates White Balance compensation based on color temperature information. Count on more accurate White Balance in flash photography.
PRODUCT DESCRIPTION | SONY HVL-F20M - HOT-SHOE CLIP-ON FLASH |
CAMERA FLASH | HOT-SHOE CLIP-ON FLASH |
DIMENSIONS (WXDXH) | 2.4 IN X 0.9 IN X 4.5 IN |
WEIGHT | 3.88 OZ |
COLOR | BLACK |
GUIDE NUMBER (M / ISO 100) | 20 |
LENS COVERAGE | 27MM |
SUPPORTED EXPOSURE CONTROL | TTL, ADI |
FEATURES | WIRELESS OFF-CAMERA CONTROL |
REQUIRED BATTERY | 2 X BATTERY - AAA TYPE |
DESIGNED FOR | CYBER-SHOT DSC-HX60, RX10, RX1R, RX10; HANDYCAM FDR-AX30, AX33, AX40, AX55, AXP33, AXP35, AXP55, HDR-CX675, CX900, PJ620, PJ630, PJ670, PJ675, PJ800, PJ810, PJ820; A SLT-A65; A3000; A3500; A58; A6000; A6300; A6400; A6500; A68; A7; A7 II; A7 III; A77 II; A7R; A7R II; A7R III; A7S; A7S II; A9; A99 II |
GENERAL | |||||||||||||||||||||
|
|||||||||||||||||||||
CAMERA FLASH | |||||||||||||||||||||
|
|||||||||||||||||||||
MISCELLANEOUS | |||||||||||||||||||||
|
|||||||||||||||||||||
POWER | |||||||||||||||||||||
|
|||||||||||||||||||||
COMPATIBILITY INFORMATION | |||||||||||||||||||||
|
$ 249.99
Sony SKU: HVL-F28RM | Helix SKU: SYHVLF28RM
$ 299.99
Sony SKU: HVL-F32M | Helix SKU: SYHVLF32M
Easy to store and carry thanks to its slim, compact and lightweight design. With a guide number of 32 (GN32), this powerful yet compact flash is the perfect size to fit E-mount cameras. It is convenient for everyday shooting and is easy to carry with its flat design.
Bouncing the flash will reduce the shadow intensity and produce softer lighting.
Flash mode and intensity settings are shown on the LCD panel, plus a warning display when the remaining charge gets too low.
To ensure maximum reliability even in challenging conditions, especially outdoors, uniquely designed seals at joints around the body, LCD panel, mounting foot, and moving parts keep dust and moisture out.4
Control the ideal combination of shutter speed and flash intensity for precisely the effect you are looking for.
Flash photography is possible with the unit detached from the camera, enabling creation of shadows to add a sense of dimensionality and depth to the image.
Synched flash with high-speed shutter in Auto. Supports all shutter speeds and wireless operation.
PRODUCT DESCRIPTION | SONY HVL-F32M - HOT-SHOE CLIP-ON FLASH |
CAMERA FLASH | HOT-SHOE CLIP-ON FLASH |
DIMENSIONS (WXDXH) | 2.6 IN X 3.2 IN X 4.7 IN |
WEIGHT | 8.29 OZ |
COLOR | BLACK |
SUPPORTED EXPOSURE CONTROL | P-TTL, ADI |
FLASH DURATION | 4.5 MS |
COLOR TEMPERATURE | 5500K |
RED-EYE REDUCTION | YES |
REQUIRED BATTERY | 2 X BATTERY - AA TYPE |
DESIGNED FOR | CYBER-SHOT DSC-RX10 III, DSC-RX1R II, RX10 IV; HANDYCAM FDR-AX30, FDR-AX40, FDR-AX55, FDR-AXP33, FDR-AXP35, FDR-AXP55; A SLT-A58; A3000; A3500; A6000; A6300; A6400; A6500; A68; A7; A7 II; A7 III; A77 II; A7R; A7R II; A7R III; A7S; A7S II; A9; A99 II |
GENERAL | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
CAMERA FLASH | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
POWER | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
COMPATIBILITY INFORMATION | |||||||||||||||||||||||||||
|