Kupo 1" Conversion Adapter 1/4"-20F to 1/4"-20M (Set of 5)
$ 6.95
Kupo 1" Conversion Adapter 1/4"-20F to 1/4"-20M (Set of 5)
Kupo SKU: KG014312 | Helix SKU: KUKG014312
Overview
Kupo 1" Conversion Adapter 1/4"-20F to 1/4"-20M (Set of 5)-convert any 1/4'-20 receiver to a male 1/4"20 stud- 1"/25.4mm long. - tightens securely into place using an allen key or hex key. - mount spigots, tripod heads or anything with 1/4"-20 receiver in difficult places
Kupo 1" Conversion Adapter 3/8"-16F to 3/8"-16M (Set of 5)
$ 6.39
Kupo 1" Conversion Adapter 3/8"-16F to 3/8"-16M (Set of 5)
Kupo SKU: KG014712 | Helix SKU: KUKG014712
Overview
Kupo 1" Conversion Adapter 1/4"-20F to 1/4"-20M (Set of 5)-convert any 1/4'-20 receiver to a male 1/4"20 stud- 1"/25.4mm long. - tightens securely into place using an allen key or hex key. - mount spigots, tripod heads or anything with 1/4"-20 receiver in difficult places
Kupo 1-1/8In (28Mm) Junior Pin To Elemack Adapter
$ 104.95
Kupo 1-1/8In (28Mm) Junior Pin To Elemack Adapter
Mfr SKU: KG031212 | Helix SKU: KUKG031212
Overview:
This adapter allows you to use Elemack attachments from a combo stand or any other equipment that comes with 1-1/8in (28mm) junior receiver. The 1-1/8in (28mm) junior chromed steel pin is welded to the round plate and securely mounted on the Elemack Starter with two 3/8in-16 countersunk bolts.
Features:
- Allows you to quickly convert any lightstand, adapter or any other accessory with a junior receiver to support any Elemack adapters and accessories
- The 1-1/8in (28mm) junior chromed steel pin is welded to the round plate and securely mounted on the Elemack Starter with two 3/8in-16 countersunk bolts.
- The 28mm junior pin is equipped with a safety pin hole for extra security
Specifications:
- Color: Silver
- Material - Primary: Aluminum
- Material - Secondary: Steel
- Product Height: 3.94in / 10.0cm
- Product Length: 7.83in / 19.9cm
- Product Width: 7.83in / 19.9cm
- Product Weight: 5.07lb / 2.3kg
- Stand Adapter Type: 28mm Spigot
Kupo 1/4 Inches-20 Threaded Mounting Plate with Baby 5/8 Feet Feet (16mm) Stud KG002412
$ 20.19
This round flat plate allows you to mount your camera, field recorder or any other accessory tapped with a female 1/4"-20 thread to a Convi Clamp or any piece of grip equipment that has a baby receiver.
Kupo 100mm Caster with Brake, 25.4mm Square Adapter, Set of Three, KS940712
$ 110.95 - Sold Out
Casters take your light stands mobile! They especially come in handy when you are doing work in the studio. Casters will protect your floors, keep things quiet on set and of course, make repositioning your lighting fixtures that much easier. The KS940712 is a set of three 3-15/16 (100mm) casters designed to fit 1 (25.4mm) square legs. This set of casters has brakes that prevent the wheels from rolling and keeps your stand locked in place.
Kupo 100mm Caster with Brake, 30mm Square Adapter, Set of Three, KS940612
$ 110.95
Casters take your light stands mobile! They especially come in handy when you are doing work in the studio. Casters will protect your floors, keep things quiet on set and of course, make repositioning your lighting fixtures that much easier. The KS940612 is a set of three 3-15/16 (100mm) casters designed to fit 1-3/16 (30mm) square legs. This set of casters has brakes that prevent the wheels from rolling and keeps your stand locked in place.
Kupo 100mm Caster with Brake, M10 Thread Adapter, Set of Three, KS940912
$ 86.95 - Sold Out
Kupo 100mm Caster with Brake, M10 Thread Adapter, Set of Three, KS940822
Kupo 105cm long PVC Coated Safety Wire -5.0mm Diameter, KG061112
$ 10.69
Safety cables are recommended when supporting lights, cameras or accessories from the ceiling in case they unexpectedly come loose from where they are mounted. The KG061112 is a heavy-duty stainless steel safety cable. It is 41.3 (105cm) long, and has a diameter of 0.19 (5mm) with a load rating of 110lbs (50Kg). The KG061112 comes equipped with a locking D ring closure.
Kupo 10In Suction Cup With Cheese Plate And 1-1/2In (48Mm) Starter
$ 353.95
Kupo 10In Suction Cup With Cheese Plate And 1-1/2In (48Mm) Starter
Mfr SKU: KG086911 | Helix SKU: KUKG086911
Overview:
Primarily designed to mount cameras and lighting equipment to cars, this suction cup is 10in in size with a round cheese plate with multiple 3/8in mounting holes and two 1-1/2in starters. Includes two 1-1/2in starters 3-1/2in (9cm) long, which allows fitting to 1-1/2in (48.3mm) speed-rail systems. Supplied with pad protector.
Features:
- Designed for mounting cameras and lighting equipments to cars
- 10in suction cup with standard 3/8in holes, round cheese plate and two 1-1/2in starters
- Features two 1-1/2in starters, 3.5in (9cm) long, which allows it to fit 1-1/2in Speed-Rail systems
- The suction cup can be used at temperatures from 10.4 to 120.2°F (-12 to 49°C)
- Red indicator on the suction cup warns of any vacuum loss
Specifications:
- Color: Black and Silver
- Material - Primary: Aluminum
- Material - Secondary: Rubber
- Material - Tertiary: Silicon
- Product Height: 5.79in / 14.7cm
- Product Length: 12.76in / 32.4cm
- Product Width: 9.06in / 23.0cm
- Product Weight: 7.49lb / 3.4kg
- Stand Adapter Type: 1-1/2in Starter and Industry Standard 3/8in Mounting Holes
Kupo 11" Rock'S Arm
$ 248.95
Kupo 11" Rock'S Arm
Mfr SKU: KG102411 | Helix SKU: KUKG102411
Overview:
Features:
- Designed for holding field monitors, recorders, LED lights and microphones on a camera rig. Can support up to 17.6lbs
- Stainless steel 1/4in-20 threaded in one end, and 3/8in-16 threaded in the other
- Friction wheel controls ball-joint tension simultaneously making the arm handy and convenient to operate
- A unique taper engagement mechanism facilitates ball-joint fine adjustment even when tightened
Specifications:
- Color: Black
- Material - Primary: Steel
- Material - Secondary: Stainless Steel
- Product Height: 2.05in / 5.2cm
- Product Length: 6.77in / 17.2cm
- Product Width: 1.73in / 4.4cm
- Product Weight: 0.93lb / 0.42kg
- Maximum Payload Capacity: 17.6lb / 8.0kg
- Closed Length: 6.14in / 15.6cm
- Maximum Extension (Height): 11.1in / 28.2cm
- Minimum Extension (Height): 6.14in / 15.6cm
- Removable Stand Adapter: 1/4in-20 Male and 3/8in-16 Male
Kupo 2-1/2-Inch Grip Head - Silver
$ 29.95
Kupo 2-1/2-Inch Grip Head - Silver
Kupo SKU: KG203012 | Helix SKU: KUKG203012
Overview
Kupo 2-1/2-Inch Grip Head with Big Handle
$ 29.95
Kupo 2-1/2-Inch Grip Head with Big Handle
Kupo 20" Master C-Stand with Sliding Leg - Black
$ 137.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 20" Master C-Stand with Sliding Leg - Silver
$ 137.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 20" Master C-Stand with Turtle Base - Black
$ 164.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 20" Master C-Stand with Turtle Base - Silver
$ 36.95
Kupo 20" Master C-Stand with Turtle Base - Silver
Kupo 20" Sliding Leg Kit (Stand, 2.5" Grip Head & 20" Grip Arm with Hex Stud) - Silver
$ 205.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 20" Turtle Base Kit (Stand, 2.5" Grip Head & 20" Grip Arm with Hex Stud) - Black
$ 211.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 20" Turtle Base Kit (Stand, 2.5" Grip Head & 20" Grip Arm with Hex Stud) - Silver
$ 211.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 20" Sliding Leg Kit (Stand, 2.5" Grip Head & 20" Grip Arm with Hex Stud) - Black
$ 205.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 20-Inch Extension Grip Arm with Big Handle
$ 39.95
Kupo 20-Inch Extension Grip Arm with Big Handle
Kupo 20-Inch Extension Grip Arm with Big Handle - Silver, KG203212
$ 39.95
Kupo 20-Inch Extension Grip Arm with Big Handle - Silver, KG203212
Kupo 3 Section Wind-Up Stand with Auto Self-Lock, KS401212
$ 639.95
Wind-up stands have been the definition of strength and safety in the grip industry since their inception. They enable a single operator to raise and lower heavy loads safely with just the turn of a handle. As you crank the handle both risers move simultaneously. A single clockwise revolution of the handle raises the stand 1.73 (4.4 cm), and a single counter-clockwise revolution will lower the stand by the same amount. The KS401212 has an automatic self-locking mechanism that prevents the light stand from dropping unexpectedly making the operation safer. The risers have a series of perforations that are engaged by a safety pin. With the auto-lock engaged, the safety pin automatically locks into each successive perforation as you raise the stand. Once the auto-lock is disengaged, an internal spring retracts the safety pin allowing you to lower the stand. The crank handle folds back for travel. It also is designed as a safety measure and can be folded back and placed between two of the tripod's legs. The reason for this is to catch the handle and prevent it from turning, stopping the risers from quickly falling if the lock is unexpectedly disengaged. The tension between the brake shoe and risers is user adjustable, simply with an Allen wrench. The KS401212 also features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. The KS401212 comes equipped with a skid-proof foot-step located on the main section of its base to allow the user to stand upon it to reach the top risers and head to make adjustments if necessary.
Kupo 3 Way Clamp, for 1.0-1.4-Inch (25 to 35mm) Tube, KG900412
$ 44.95 - Sold Out
The 3 Way Clamp is another ingenious Kupo innovation. This all metal cast aluminum clamp features a unique spring locking mechanism that allows you to instantly latch and release the locking collar around any tubing sized from 1.0 -1.4 (25 -35mm) in diameter. Just a quick turn of the tension handle to secure it in place and your ready to mount any light fixture or accessory up to 66 lbs (30 Kg) to light stands, scaffolds or Kupoles in a snap! The 3 Way Clamp has three recessed mounting locations distributed in 90 degree increments in to accept a series of interchangeable accessories.
Kupo 3" Pump Cup with 1/4" - 20
$ 49.95 - Sold Out
Kupo 3" Pump Cup with 1/4" - 20
Kupo SKU: KG087911 | Helix SKU: KUKG087911
Overview
Kupo’s new range of pumping suction cups offers a temporary solid light mounting solution on smooth, nonporous surfaces. Each Kupo Suction Cup comes with 5/8" baby pin; 3/8" thread bolt or 3/8" thread socket. This permits mounting small lights; cameras and accessories to windows, mirrors, automobiles, boats and any other smooth, nonporous surfaces. Because of the excellent rubber material with silicon, Kupo Suction Cups can be used at temperatures from -12°- 49° C/10.4°- 120°F. A red-line indicator is equipped in most suction cups warning of any vacuum loss due to adverse shooting conditions.
3" ( 7.62 cm ) pumping suction cup with 1/4"-20 thread X 5/8" length. Ideal for mounting lightweight video cameras or a variety of lights and sound recording equipment.
| Weight | 140 G (5 oz) |
|---|---|
| Maximum Load | 7 KG (14.4 lbs) |
Kupo 3-Axis Camera Mounting Plate Kit
$ 253.95 - Sold Out
Kupo 3-Axis Camera Mounting Plate Kit
Mfr SKU: KG604312 | Helix SKU: KUKG604312
Overview
The 3-Axis Camera Mounting Plate Kit is designed for mounting a camera on a pipe or truss 48-51mm in diameter. Features three couplers – two couplers with a 5.5in (14cm) long 2in pipe, and the other coupler with a camera mounting plate which allows for greater flexibility in positioning the camera. Perfect for mounting on a pipe boom rig or truss for overhead filming. Constructed from lightweight and solid aluminum alloy.
Features
- Designed for mounting a camera on a pipe or truss 48-51mm in diameter.
- Perfect for mounting on a pipe boom rig or truss for overhead filming
- Features three couplers - two couplers with a 5.5in (14cm) long 2in wide pipe, and the other coupler with a camera mounting plate. This allows for greater flexibility in positioning the camera
- Camera plate features six standard 3/8in holes, spaced every 1in, making it compatible for mounting to most industry-standard cheese plates
- Constructed from lightweight and solid aluminum alloy
Specifications
- Color: Silver
- Material - Primary: Aluminum
- Product Height: 2.36in / 6.0cm
- Product Length: 9.84in / 25.0cm
- Product Width: 5.51in / 14.0cm
- Product Weight: 1.76lb / 0.8kg
- Maximum Jaw Diameter: 2.01in / 51.0mm
- Minimum Jaw Diameter: 1.89in / 48.0mm
- Stand Adapter Type: Camera Plate with 3/8in female
Kupo 3/8 Feet Feet-16 Threaded Mounting Plate with Baby 5/8 Feet Feet (16mm) Stud KG002312
$ 20.19
This round flat plate allows you to mount your tripod head or any other accessory tapped with a female 3/8"-16 thread to a Convi Clamp or any piece of grip equipment that has a baby receiver.
Kupo 3/8-Inch-16 F to 1/4-Inch-20 M Adapter, KG003912
$ 5.39
The KG003912 is a small adapter that converts a 3/8-16 male thread to a 1/4-20 male thread. The KG003912 is made from brass.
Kupo 4 Way Clamp, for 1.4-2.0-Inch (35 to 50mm) Tube, KG900712
$ 54.95 - Sold Out
The 4 Way Clamp is another ingenious Kupo innovation. This all metal cast aluminum clamp features a unique spring locking mechanism that allows you to instantly latch and release the locking collar around any tubing sized from 1.4 -2.0 (35 -50mm) in diameter. Just a quick turn of the tension handle to secure it in place and your ready to mount any light fixture or accessory up to 66 lbs (30 Kg) to light stands, scaffolds or Kupoles in a snap! The 4 Way Clamp has four recessed mounting locations distributed in 90 degree increments to accept a series of interchangeable accessories.
Kupo 4" Super Visor End Jaw KG602912
$ 55.95 - Sold Out
Kupo 4" Super Visor End Jaw KG602912
Kupo 4-1/2-Inch Grip Head with 1-1/8-Inch Stud and Receiver, KG400512
$ 69.95
The 4-1/2 Grip Head, KG400512 consists of a pair of rotating aluminum discs attached to a junior 1-1/8 (28mm) stud and receiver. The discs have two different sized V shaped jaws to accept any accessory with a 5/8 or 3/8 mounting stud or tubing. The V shaped jaws have teeth that grab whatever is mounted between the plates securely. The KG400512 uses a non-slip aluminum friction disc that will maintain its durability over time that offers the user positive locking strength and precise control. The cine industry also refers to it as a lollipop. When you need to crank down on a large overhead frame to hold it in place, this is the grip head for the job. The KG400512 is designed to convert a junior stand with a combo head into an overhead stand.
Kupo 4-Inch (10cm) Super Viser Clamp with Hex Receiver - End Jaw, KG601512 (NLA)
$ 50.00
The Super Viser is an extremely strong and versatile clamp. It can mount securely onto round and square objects, or just about any unique shape up to 4 (11cm) in diameter. The jaw position remains fixed on one side of the clamp, enabling it to be mounted where limited space is available. The specially formulated grip pad provides a strong grip, yet protects the surface it's clamped around. Another Kupo innovation outfits this clamp with a hexagonal receiver that accepts the full compliment of Convi Clamp accessories. The Super Viser boasts an impressive load capacity of 66.1 lbs (30 Kg) and comes in a silver aluminum finish.
Kupo 40" Master C-Stand with Sliding Leg - Black
$ 149.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Master C-Stand with Sliding Leg - Silver
$ 149.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Master C-Stand with Turtle Base - Black
$ 169.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Master C-Stand with Turtle Base - Silver
$ 169.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Sliding Leg Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Black
$ 211.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Sliding Leg Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Silver
$ 211.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Turtle Base Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Black
$ 236.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Turtle Base Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Silver
$ 236.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40-Inch Extension Grip Arm with Big Handle
$ 44.95
Kupo 40-Inch Extension Grip Arm with Big Handle
Kupo 40-Inch Extension Grip Arm with Big Handle - Silver, KG203412
$ 44.95
Kupo 40-Inch Extension Grip Arm with Big Handle - Silver, KG203412
Kupo 40-Inch Hex Grip Arm with Big Handle
$ 53.95
Kupo 40-Inch Hex Grip Arm with Big Handle
Kupo 5/8 Inches (16mm) Receiver with 3/8 Inches-16 Thread KG004611
$ 12.95
Kupo 5/8 Inches (16mm) Receiver with 3/8 Inches-16 Thread KG004611
Kupo 6 Inches (15cm) Chain Clamp with Dual Baby, 5/8 Inches (16mm) Studs KG600412
$ 69.95
This clamp consists of a locking pair of pliers with a 6" length of chain that can be wrapped around odd shaped objects such as a tree branch.
Kupo 6" Pump Cup with 3/8"
$ 62.95 - Sold Out
Kupo 6" Pump Cup with 3/8"
Kupo SKU: KG088611 | Helix SKU: KUKG088611
Overview
Kupo’s new range of pumping suction cups offers a temporary solid light mounting solution on smooth, nonporous surfaces. Each Kupo Suction Cup comes with 5/8" baby pin; 3/8" thread bolt or 3/8" thread socket. This permits mounting small lights; cameras and accessories to windows, mirrors, automobiles, boats and any other smooth, nonporous surfaces. Because of the excellent rubber material with silicon, Kupo Suction Cups can be used at temperatures from -12°- 49° C/10.4°- 120°F. A red-line indicator is equipped in most suction cups warning of any vacuum loss due to adverse shooting conditions.
6" pumping suction cup with 3/8” -16 thread x 5/8” length stud for use with ball head camera mounts.( Supplied with pad protector)
| Weight | 0.45 KG (1 lbs) |
|---|---|
| Maximum Load | 32 KG (70 lbs) |
Kupo 6" Pump Cup with 5/8" Baby Pin KG083711
$ 74.95 - Sold Out
Kupo 6" Pump Cup with 5/8" Baby Pin KG083711
