Benro A1573FS2 Video Tripod Kit - Single Legs
$ 199.00
Benro A1573FS2 Video Tripod Kit - Single Legs - IDA1573FS2
The perfect pairing of Video Heads, Legs and a Padded Travel Case, each Benro Video Tripod Kit is based on an eighth-generation design of single leg tubes and flip lever leg lock mechanisms.
The unique combination of the Benro A1573F Series 1 Video Tripod and S2 Video Head offers exceptional rigidity and torque-resistance so critical to smooth camera movement.
Features
A hook, located on the bottom of the center-column, allows you to hang additional weight from the tripod’s center of gravity for increased stability.
Equipped with interchangeable screw-in rubber and stainless steel spiked feet.
Allows adjustment to prevent uneven pans.
Removable QR plate with sliding adjustment for better camera balance.
Set tension control and lock of full front to rear tilt axis.
Adjusts tension and locks Head on 360 degree pan movement.
Included for handy transport and protection of the tripod and head.
Tripod height can easily be set by a flip of the quick lock leg levers, which combined with anti-rotation legs enable fast and fumble-free set-up.
A wing nut-style center column-locking knob allows for secure, intuitive-action height adjustments on the fly.
Easy camera mounting and dismount for transport.
Provides fine leveling control on the vertical Center Column.
For an extra measure of flexibility, Benro tripod legs can be independently locked into place at three different angles to enable shooting in cramped quarters, on irregular surface areas, or at ground level.
A thick layer of closed-cell nitrile butadiene rubber (NBR) provides a comfortable yet firm grip when carrying your Benro tripod.
With angular adjustment for convenient user control.
Specifications
| MAXIMUM LOAD | 5.51 lb (2.5 kg) |
| MAX HEIGHT (24° LEG ANGLE) W/COLUMN EXTENDED | 61.8 in (157 cm) |
| MAX HEIGHT (24° LEG ANGLE) W/COLUMN RETRACTED | 54.72 in (139 cm) |
| MINIMUM HEIGHT | 16.14 in (41 cm) |
| MAXIMUM HEIGHT | 61.8 in (157 cm) |
| FOLDED LENGTH | 27.36 in (69.5 cm) |
| LEG LOCK TYPE | Flip Lock |
| INDEPENDENT LEG SPREAD | Yes - with 3 stops |
| TILT RANGE | +85 / -85 (Fixed Fluid Cartridge Balance) |
| QUICK RELEASE (QR) PLATE | Slide-In Video (QR4) 1/4-20 & 3/8 |
| HEAD MOUNT THREAD SIZE | 3/8-16 Leveling |
| WEIGHT | 4.41 lb (2 kg) |
Benro A1573FS2
Benro A2573FS4 Single Leg Video Tripod Kit, Black
$ 275.00
The perfect pairing of Video Heads, Legs and a Padded Travel Case, each Benro Video Tripod Kit is based on an eighth-generation design of single leg tubes and flip lever leg lock mechanisms.
Benro A2573FS6 Single Leg Video Tripod Kit - (Black)
$ 300.00
The perfect pairing of Video Heads, Legs and a Padded Travel Case, each Benro Video Tripod Kit is based on an eighth-generation design of single leg tubes and flip lever leg lock mechanisms.
Benro A2883FS4 Aero4 Travel Angel Video Tripod Kit (Black)
$ 259.00
Take to the skies with Benro’s Aero travel tripod kit for video. This super compact video tripod utilizes reverse folding legs, making it small enough to fit inside of a backpack, rolling case or carry on. Each kit includes a removable flat base fluid effect video head with both pan (left to right) and tilt (up & down) controls for smooth and precise camera movements. They are equipped with a sliding quick release plate and safety stop which enables perfect camera balance and speedy set up and removal of your camera. The unique leveling column provides fast and accurate leveling, a necessity to keep your horizons straight and level during horizontal pans. The integrated bubble level assures perfect alignment. These lightweight aluminum tripod kits feature reverse folding legs with secure quick flip leg lock levers, independent leg angle adjustments allowing easy set-up on uneven ground, a weight hook to secure your tripod in the windiest of conditions and convertible rubber/spiked feet to secure your tripod to any surface. The Aero tripod kits also incorporate the unique convertible monopod. Simply attach the column to the removable leg section, creating the perfect video monopod. No tools or additional equipment is necessary. Supplied with a padded carry case for the ultimate in travel convenience.
Benro A373 Series 3 Aluminum Video Tripod and S7 Head A373FBS7
$ 399.00 - Sold Out
Benro A373 Series 3 Aluminum Video Tripod and S7 Head A373FBS7
Benro A373FBS8 Video Tripod Kit - Aluminum (Black)
$ 445.00
+90 / -75 (Stepped 0-3 Fluid Cartridge Balance). Slide-In Video (QR6) 1/4-20 & 3/8. QR Plate QR6, Pan Bar Handle BS04
Benro A38FD Monopod with 3-Leg Locking Base, 4 Leg Sections, Flip Lock Leg Release (Black)
$ 76.00
The A38 Video Monopod features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. This lightweight video monopod, available in both flip lock and twist lock, provides a 39.7 lb. payload capacity. Each Benro Video Monopod is based on an eighth-generation design of single leg tubes and the option of flip lever or twist leg lock mechanisms. Carrying case included.
Benro A38FDS2 Monopod with 3-Leg Locking Base and S2 Head, 4 Leg Sections, Flip Lock Leg Release (Black)
$ 149.00
This lightweight video monopod, available in both flip lock and twist lock, provides a 5.5 lb. payload capacity ideal for small cameras. The S2 Video Monopod Kit features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. The S2 head includes an independent pan lock, which allows you to pan smoothly without having to turn the entire monopod. Other features include tilt lock, foam hand grip and built-in bubble level. Each Benro Video Monopod Kit is based on an eighth-generation design of single leg tubes and the option of flip lever or twist leg lock mechanisms. Carrying case included.
Benro A38TD Monopod with 3-Leg Locking Base, 4 Leg Sections, Twist Lock Leg Release (Black)
$ 79.00
The A38 Video Monopod features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. This lightweight video monopod, available in both flip lock and twist lock, provides a 39.7 lb. payload capacity. Each Benro Video Monopod is based on an eighth-generation design of single leg tubes and the option of flip lever or twist leg lock mechanisms. Carrying case included.
Benro A38TDS2 Monopod with 3-Leg Locking Base and S2 Head, 4 Leg Sections, Twist Lock Leg Release (Black)
$ 149.00
This lightweight video monopod, available in both flip lock and twist lock, provides a 5.5 lb. payload capacity ideal for small cameras. The S2 Video Monopod Kit features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. The S2 head includes an independent pan lock, which allows you to pan smoothly without having to turn the entire monopod. Other features include tilt lock, foam hand grip and built-in bubble level. Each Benro Video Monopod Kit is based on an eighth-generation design of single leg tubes and the option of flip lever or twist leg lock mechanisms. Carrying case included.
Benro A48FD Monopod with 3-Leg Locking Base, 4 Leg Sections, Flip Lock Leg Release (Black)
$ 89.00
The A48 Video Monopod features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. This travel-friendly video monopod, available in both flip lock and twist lock, provides a 44.1 pound payload capacity ideal for HDSLR cameras. Each Benro Video Monopod is based on an eighth-generation design of single leg tubes and the option of flip lever or twist leg lock mechanisms.
Benro A48FDS4 Monopod with 3-Leg Locking Base and S4 Head, 4 Leg Sections, Flip Lock Leg Release (Black)
$ 199.00
This travel-friendly video monopod, available in both flip lock and twist lock, provides a 8.8 lb. payload capacity ideal for HDSLR cameras. The S4 Video Monopod Kit features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. The S4 head includes an independent pan lock, which allows you to pan smoothly without having to turn the entire monopod. Other features include tilt lock, 501PL compatible QR6 plate, tilt drag and illuminated bubble level. Each Benro Video Monopod Kit is based on an eighth-generation design of single leg tubes and the option of flip lever or twist leg lock mechanisms. Carrying case included.
Benro A48FDS6 Monopod with 3-Leg Locking Base and S6 Head, 4 Leg Sections, Flip Lock Leg Release (Black)
$ 249.00
This heavy-duty video monopod, available in both flip lock and twist lock, provides a 13.2 lb. payload capacity as well as a 4-step counterbalance that is necessary when working with heavier cameras and longer lenses. The S6 Video Monopod Kit features a 3-leg locking base with ball joint allows for smooth and stable shots along with reverse folding legs for compact travel. The S6 head includes an independent pan lock, which allows you to pan smoothly without having to turn the entire monopod. Other features include tilt lock, 501PL compatible QR6 plate, tilt drag and illuminated bubble level. Each Benro Video Monopod Kit is based on an eighth-generation design of single leg tubes and the option of flip lever or twist leg lock mechanisms. Carrying case included.
Benro A48TD Monopod with 3-Leg Locking Base, 4 Leg Sections, Twist Lock Leg Release (Black)
$ 89.00
The A48 Video Monopod features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. This travel-friendly video monopod, available in both flip lock and twist lock, provides a 44.1 lb. payload capacity ideal for HDSLR cameras. Each Benro Video Monopod is based on an eighth-generation design of single leg tubes and the option of flip lever or twist leg lock mechanisms. Carrying case included.
Benro A48TDS4 Monopod with 3-Leg Locking Base and S4 Head, 4 Leg Sections, Twist Lock Leg Release (Black)
$ 199.00
This travel-friendly video monopod, available in both flip lock and twist lock, provides a 8.8 lb. payload capacity ideal for HDSLR cameras. The S4 Video Monopod Kit features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. The S4 head includes an independent pan lock, which allows you to pan smoothly without having to turn the entire monopod. Other features include tilt lock, 501PL compatible QR6 plate, tilt drag and illuminated bubble level. Each Benro Video Monopod Kit is based on an eighth-generation design of single leg tubes and the option of flip lever or twist leg lock mechanisms. Carrying case included.
Benro A48TDS6 Monopod with 3-Leg Locking Base and S6 Head, 4 Leg Sections, Twist Lock Leg Release (Black)
$ 249.00
This heavy-duty video monopod, available in both flip lock and twist lock, provides a 13.2 lb. payload capacity as well as a 4-step counterbalance that is necessary when working with heavier cameras and longer lenses. The S6 Video Monopod Kit features a 3-leg locking base with ball joint allows for smooth and stable shots along with reverse folding legs for compact travel. The S6 head includes an independent pan lock, which allows you to pan smoothly without having to turn the entire monopod. Other features include tilt lock, 501PL compatible QR6 plate, tilt drag and illuminated bubble level. Each Benro Video Monopod Kit is based on an eighth-generation design of single leg tubes and the option of flip lever or twist leg lock mechanisms. Carrying case included.
Benro Adventure 8X CF Series 1 Tripod Kit, 4 Section, Flip Lock, B1 Head TAD18CB1
$ 315.00 - Sold Out
Benro Adventure 8X CF Series 1 Tripod Kit, 4 Section, Flip Lock, B1 Head TAD18CB1
Benro Adventure 8X CF Series 2 Tripod Kit, 4 Section, Flip Lock, B2 Head TAD28CB2
$ 370.00 - Sold Out
Benro Adventure 8X CF Series 2 Tripod Kit, 4 Section, Flip Lock, B2 Head TAD28CB2
Benro Adventure 8X CF Series 2 Tripod, 3 Section, Flip Lock TAD27C
$ 250.00 - Sold Out
Benro Adventure 8X CF Series 2 Tripod, 3 Section, Flip Lock TAD27C
Benro Adventure 8X CF Series 2 Tripod, 4 Section, Flip Lock TAD28C
$ 280.00 - Sold Out
Benro Adventure 8X CF Series 2 Tripod, 4 Section, Flip Lock TAD28C
Benro Adventure 8X CF Series 3 Monopod, 4 Section, Flip Lock MAD38C
$ 110.00 - Sold Out
Benro Adventure 8X CF Series 3 Monopod, 4 Section, Flip Lock MAD38C
Benro Adventure 8X CF Series 3 Tripod Kit, 4 Section, Flip Lock, B3 Head TAD38CB3
$ 440.00 - Sold Out
Benro Adventure 8X CF Series 3 Tripod Kit, 4 Section, Flip Lock, B3 Head TAD38CB3
Benro Adventure 8X CF Series 3 Tripod, 3 Section, Flip Lock TAD37C
$ 300.00 - Sold Out
Benro Adventure 8X CF Series 3 Tripod, 3 Section, Flip Lock TAD37C
Benro Adventure 8X CF Series 4 Monopod, 5 Section, Flip Lock MAD49C
$ 150.00 - Sold Out
Benro Adventure 8X CF Series 4 Monopod, 5 Section, Flip Lock MAD49C
Benro Adventure AL Series 1 Tripod Kit, 4 Section, Flip Lock, IB1 Head TAD18AIB1
$ 190.00 - Sold Out
Benro Adventure AL Series 1 Tripod Kit, 4 Section, Flip Lock, IB1 Head TAD18AIB1
Benro Adventure AL Series 1 Tripod, 4 Section, Flip Lock TAD18A
$ 100.00 - Sold Out
Benro Adventure AL Series 1 Tripod, 4 Section, Flip Lock TAD18A
Benro Adventure AL Series 2 3-Section Aluminum Tripod with Flip Locks TAD27A
$ 124.95
Benro Adventure AL Series 2 3-Section Aluminum Tripod with Flip Locks TAD27A
Benro SKU: TAD27A | Helix SKU: IDTAD27A
Overview
This classic design tripod, the Adventure TAD27A, offers advanced features and controls for exploring every style of photography. The Adventure tripod combines aluminum legs with lightweight magnesium castings and quick flip leg locks for ease of use.
Specifications
| MAXIMUM LOAD | 26.5 lb (12 kg) |
| MAX HEIGHT (24° LEG ANGLE) W/COLUMN EXTENDED | 63.8 in (162 cm) |
| MAX HEIGHT (24° LEG ANGLE) W/COLUMN RETRACTED | 53.15 in (135 cm) |
| MINIMUM HEIGHT | 15.16 in (38.5 cm) |
| MAXIMUM HEIGHT | 63.8 in (162 cm) |
| FOLDED LENGTH | 24.2 in (61.5 cm) |
| NUMBER OF LEG SECTIONS | 3 |
| LEG LOCK TYPE | Flip Lock |
| WEIGHT | 3.95 lb (1.79 kg) |
| LEG DIAMETER 1 | 28.6 mm |
| LEG DIAMETER 2 | 25.2 mm |
| LEG DIAMETER 3 | 21.8 mm |
Item Includes
Benro Adventure AL Series 2 Tripod Kit, 4 Section, Flip Lock, IB2 Head TAD28AIB2
$ 219.95
Benro Adventure AL Series 2 Tripod Kit, 4 Section, Flip Lock, IB2 Head TAD28AIB2
The TAD28AIB2 Series 2 Adventure Aluminum Tripod with Head supports up to 22 lb, weighs 4.9 lb, extends up to 65.4", and folds down to 24.6". Its 4-section legs use flip lock levers for adjusting the height of each leg. A foam grip on one of the legs enables you to securely hold the tripod and protects your hand during cold weather.
Included with the tripod is a ball head has an Arca-type compatible clamp and quick-release plate for easy camera attachment and removal. A 90° notch lets you quickly place your camera in portrait orientation, and separate pan and ball locks provide added control. A carrying case with a shoulder strap is included to protect the tripod during transport.
-
TAD28A Series 2 Adventure Aluminum Tripod
The TAD28A Series 2 Adventure Aluminum Tripod from Benro supports up to 26.5 lb, weighs 4 lb, extends up to 61.4", and folds down to 20.7". Its 4-section legs use flip lock levers for adjusting the height of each leg. A foam grip on one of the legs enables you to securely hold the tripod and protects your hand during cold weather. A 3/8"-16 thread on top of the tripod allows you to attach any compatible tripod head of your choice. A carrying case with a shoulder strap is included to protect the tripod during transport.
-
B2 Double Action Ballhead
A member in good standing of Benro's new generation of B Series professional ballheads, the B2 Double Action Ballhead uses magnesium alloy components for better performance and lighter weight. The B2 has a dual action design featuring separate drag adjustment and lock knobs. It can handle weights up to 35.2 lb, and only tips the scales at 0.9 lb itself.
- Professional ballhead designed for use in harsh environments
- Long, precise friction adjustment, combined with a strong locking mechanism
- Accurate panoramas can be easily orchestrated using the graduated panning scale for accurate image alignment
- An ideal match for Benro series 1 or 2 tripods
- Arca-type quick release adapter
- Includes anodized aluminum PU-60 quick release plate (50 x 38mm) with rubber upper surfaces, safety stop screws to prevent accidentally falling out of loosened clamp, and a standard 1/4"-20 camera/lens screw with a 5/32" head for superior torque
-
-
Material Aluminum Load Capacity 26.5 lb (12 kg) Maximum Height 61.4" (156 cm) Maximum Height w/o Column Extended 53.3" (135.5 cm) Minimum Height 12.2" (31 cm) Folded Length 20.7" (52.5 cm) Leg Sections 4 Leg Lock Type Flip Independent Leg Spread Yes Center Column Sections 1 Center Column Type Rapid Center Brace No Spiked Feet No Head Mount Thread Size 3/8"-16 Weight 4 lb (1.8 kg) Packaging Info Box Dimensions (LxWxH) 26.0 x 4.9 x 4.6" -
B2 Double Action Ballhead
Load Capacity 35.2 lbs (16 kg) Quick Release Yes, Arca-Swiss Style (PU-60) Spirit Level Yes Tension Control Dual independent manual drag and locking controls Tilt Range -45°/+90° Separate Panning Lock Yes Camera Mount Thread Size 1/4"-20 Base Mount Thread Size 3/8"-16 Height 3.9" (10 cm) Maximum Diameter 2.5" (64 mm) Weight 0.9 lb (0.4 kg)
-
Benro Adventure AL Series 2 Tripod, 4 Section, Flip Lock TAD28A
$ 130.00
Benro Adventure AL Series 2 Tripod, 4 Section, Flip Lock TAD28A
The TAD28A Series 2 Adventure Aluminum Tripod from Benro supports up to 26.5 lb, weighs 4 lb, extends up to 61.4", and folds down to 20.7". Its 4-section legs use flip lock levers for adjusting the height of each leg. A foam grip on one of the legs enables you to securely hold the tripod and protects your hand during cold weather. A 3/8"-16 thread on top of the tripod allows you to attach any compatible tripod head of your choice. A carrying case with a shoulder strap is included to protect the tripod during transport.
| Material | Aluminum |
| Load Capacity | 26.5 lb (12 kg) |
| Maximum Height | 61.4" (156 cm) |
| Maximum Height w/o Column Extended | 53.3" (135.5 cm) |
| Minimum Height | 12.2" (31 cm) |
| Folded Length | 20.7" (52.5 cm) |
| Leg Sections | 4 |
| Leg Lock Type | Flip |
| Independent Leg Spread | Yes |
| Center Column Sections | 1 |
| Center Column Type | Rapid |
| Center Brace | No |
| Spiked Feet | No |
| Head Mount Thread Size | 3/8"-16 |
| Weight | 4 lb (1.8 kg) |
Benro Adventure AL Series 3 Monopod, 4 Section, Flip Lock MAD38A
$ 50.00 - Sold Out
Benro Adventure AL Series 3 Monopod, 4 Section, Flip Lock MAD38A
Benro Adventure AL Series 4 Monopod, 5 Section, Flip Lock MAD49A
$ 65.00 - Sold Out
Benro Adventure AL Series 4 Monopod, 5 Section, Flip Lock MAD49A
Benro AL Short Center Column, Series 0 ASC0
$ 30.00 - Sold Out
Benro AL Short Center Column, Series 0 ASC0
Benro AL Short Center Column, Series 1 ASC1
$ 30.00 - Sold Out
Benro AL Short Center Column, Series 1 ASC1
Benro AL Short Center Column, Series 2 ASC2
$ 30.00 - Sold Out
Benro AL Short Center Column, Series 2 ASC2
Benro AL Short Center Column, Series 3 ASC3
$ 30.00 - Sold Out
Benro AL Short Center Column, Series 3 ASC3
Benro AL Short Center Column, Series 4 ASC4
$ 30.00 - Sold Out
Benro AL Short Center Column, Series 4 ASC4
Benro B0 Double Action Ballhead
$ 90.00
Benro B0 Double Action Ballhead
Benro SKU: B0 | Helix SKU: IDB0
Overview
The Benro B Series professional ball heads offer separate drag adjustment and lock knobs, for a dual action design. Magnesium alloy components insure even greater performance and lighter weight.
Features:
- 90° Cut-Out for Vertical Shots
- Arca-Swiss Compatible Quick Release System
- Individual Controls for Pan, Lock & Drag
- Panoramic Scale
- Tie Down Screw with D-Ring
- 5 Year Warranty (With Registration)
Specifications
| MAXIMUM LOAD | 17.6 lb (8 kg) |
| HEAD HEIGHT | 3.5 in (9 cm) |
| TILT RANGE | (-)45°/90° |
| DRAG CONTROL | Yes |
| SEPARATE PANNING LOCK | Yes |
| QUICK RELEASE (QR) PLATE | PU50 |
| BUBBLE LEVEL | Y |
| WEIGHT | 0.6 lb (0.29 kg) |
Benro B00 Triple Action Ballhead
$ 80.00
Benro B00 Triple Action Ballhead
Benro SKU: B00 | Helix SKU: IDB00
Overview
The Benro B Series professional ball heads offer separate drag adjustment and lock knobs, for a dual action design. Magnesium alloy components insure even greater performance and lighter weight.
Features:
- 90° Cut-Out for Vertical Shots
- Arca-Swiss Compatible Quick Release System
- Individual Controls for Pan, Lock & Drag
- Panoramic Scale
- Tie Down Screw with D-Ring
- 5 Year Warranty (With Registration)
Specifications
| MAXIMUM LOAD | 13.2 lb (6 kg) |
| QUICK RELEASE (QR) PLATE | PU50 |
| BUBBLE LEVEL | Y |
| WEIGHT | 0.6 lb (0.25 kg) |
Benro B1 Double Action Ballhead
$ 110.00
Benro B1 Double Action Ballhead
Benro SKU: B1 | Helix SKU: IDB1
Overview
The Benro B Series professional ball heads offer separate drag adjustment and lock knobs, for a dual action design. Magnesium alloy components insure even greater performance and lighter weight.
Features:
- 90° Cut-Out for Vertical Shots
- Arca-Swiss Compatible Quick Release System
- Individual Controls for Pan, Lock & Drag
- Panoramic Scale
- Tie Down Screw with D-Ring
- 5 Year Warranty (With Registration)
Specifications
| MAXIMUM LOAD | 30.9 lb (14 kg) |
| HEAD HEIGHT | 3.54 in (9 cm) |
| TILT RANGE | (-)45°/90° |
| DRAG CONTROL | Yes |
| SEPARATE PANNING LOCK | Yes |
| QUICK RELEASE (QR) PLATE | PU60 |
| BUBBLE LEVEL | Y |
| WEIGHT | 0.8 lb (0.36 kg) |
Benro B2 Double Action Ballhead
$ 130.00
Benro B2 Double Action Ballhead
Benro SKU: B2 | Helix SKU: IDB2
Overview
The Benro B Series professional ball heads offer separate drag adjustment and lock knobs, for a dual action design. Magnesium alloy components insure even greater performance and lighter weight.
Features:
- 90° Cut-Out for Vertical Shots
- Arca-Swiss Compatible Quick Release System
- Individual Controls for Pan, Lock & Drag
- Panoramic Scale
- Tie Down Screw with D-Ring
- 5 Year Warranty (With Registration)
Specifications
| MAXIMUM LOAD | 35.3 lb (16 kg) |
| HEAD HEIGHT | 3.9 in (10 cm) |
| TILT RANGE | (-)45°/90° |
| DRAG CONTROL | Yes |
| SEPARATE PANNING LOCK | Yes |
| QUICK RELEASE (QR) PLATE | PU60 |
| BUBBLE LEVEL | Y |
| WEIGHT | 0.9 lb (0.41 kg) |
Benro B3 Double Action Ballhead
$ 160.00
Benro B3 Double Action Ballhead
Benro SKU: B3 | Helix SKU: IDB3
Overview
The Benro B Series professional ball heads offer separate drag adjustment and lock knobs, for a dual action design. Magnesium alloy components insure even greater performance and lighter weight.
Features:
- 90° Cut-Out for Vertical Shots
- Arca-Swiss Compatible Quick Release System
- Individual Controls for Pan, Lock & Drag
- Panoramic Scale
- Tie Down Screw with D-Ring
- 5 Year Warranty (With Registration)
Specifications
| MAXIMUM LOAD | 39.7 lb (18 kg) |
| HEAD HEIGHT | 4.3 in (11 cm) |
| TILT RANGE | (-)45°/90° |
| DRAG CONTROL | Yes |
| SEPARATE PANNING LOCK | Yes |
| QUICK RELEASE (QR) PLATE | PU60 |
| BUBBLE LEVEL | Y |
| WEIGHT | 1 lb (0.46 kg) |
Benro B4 Triple Action Ballhead
$ 200.00
Benro B4 Triple Action Ballhead
Benro SKU: B4 | Helix SKU: IDB4
Overview
The Benro B Series professional ball heads offer separate drag adjustment and lock knobs, for a dual action design. Magnesium alloy components insure even greater performance and lighter weight.
Features:
- 90° Cut-Out for Vertical Shots
- Arca-Swiss Compatible Quick Release System
- Individual Controls for Pan, Lock & Drag
- Panoramic Scale
- Tie Down Screw with D-Ring
- 5 Year Warranty (With Registration)
Specifications
| MAXIMUM LOAD | 44.1 lb (20 kg) |
| HEAD HEIGHT | 4.5 in (11.4 cm) |
| TILT RANGE | (-)45°/90° |
| DRAG CONTROL | Yes |
| SEPARATE PANNING LOCK | Yes |
| QUICK RELEASE (QR) PLATE | PU70 |
| BUBBLE LEVEL | Y |
| WEIGHT | 1.4 lb (0.65 kg) |
Benro B5 Triple Action Ballhead
$ 250.00
Benro B5 Triple Action Ballhead
Benro SKU: B5 | Helix SKU: IDB5
Overview
The Benro B Series professional ball heads offer separate drag adjustment and lock knobs, for a dual action design. Magnesium alloy components insure even greater performance and lighter weight.
Features:
- 90° Cut-Out for Vertical Shots
- Arca-Swiss Compatible Quick Release System
- Individual Controls for Pan, Lock & Drag
- Panoramic Scale
- Tie Down Screw with D-Ring
- 5 Year Warranty (With Registration)
Specifications
| MAXIMUM LOAD | 48.5 lb (22 kg) |
| HEAD HEIGHT | 5.0 in (12.8 cm) |
| TILT RANGE | (-)45°/90° |
| DRAG CONTROL | Yes |
| SEPARATE PANNING LOCK | Yes |
| QUICK RELEASE (QR) PLATE | PU85 |
| BUBBLE LEVEL | Y |
| WEIGHT | 2.0 lb (0.9 kg) |
Benro BA1075 Bowl Adapter Ring 100mm to 75mm (Black)
$ 40.00
BA1075 Bowl Adapter Ring - Step down from 100mm to 75mm
Benro BH0 Single Action Ballhead
$ 50.00
Benro BH0 Single Action Ballhead
Benro SKU: BH0 | Helix SKU: IDBH0
Overview
Benro BH Series ballheads are produced using the latest in precision machining and manufacturing technology to ensure smooth and secure operation. Ultra-small and lightweight they offer performance without compromising stability. A patented, dual locking, snap-in quick-release system enables fast and secure camera mounting and dismounting.
Benro BH-Series Ballheads provide a single action control for smooth movement and stable camera positioning.
5 Year Warranty (With Registration)
Specifications
| MAXIMUM LOAD | 13.2 lb (6 kg) |
| HEAD HEIGHT | 3.3 in (8.5 cm) |
| TILT RANGE | (-)45°/90° |
| DRAG CONTROL | No |
| SEPARATE PANNING LOCK | No |
| QUICK RELEASE (QR) PLATE | PH08 |
| BUBBLE LEVEL | Y |
| WEIGHT | 0.5 lb (0.23 kg) |
Benro BH00 Single Action Ballhead
$ 40.00
Benro BH00 Single Action Ballhead
Benro SKU: BH00 | Helix SKU: IDBH00
Overview
Benro BH Series ballheads are produced using the latest in precision machining and manufacturing technology to ensure smooth and secure operation. Ultra-small and lightweight they offer performance without compromising stability. A patented, dual locking, snap-in quick-release system enables fast and secure camera mounting and dismounting.
Benro BH-Series Ballheads provide a single action control for smooth movement and stable camera positioning.
5 Year Warranty (With Registration)
Specifications
| MAXIMUM LOAD | 11 lb (5 kg) |
| HEAD HEIGHT | 3.1 in (8 cm) |
| TILT RANGE | (-)45°/90° |
| DRAG CONTROL | No |
| SEPARATE PANNING LOCK | No |
| QUICK RELEASE (QR) PLATE | PH07 |
| BUBBLE LEVEL | Y |
| WEIGHT | 0.4 lb (0.18 kg) |
Benro BH1 Single Action Ballhead
$ 60.00
Benro BH1 Single Action Ballhead
Benro SKU: BH1 | Helix SKU: IDBH1
Overview
Benro BH Series ballheads are produced using the latest in precision machining and manufacturing technology to ensure smooth and secure operation. Ultra-small and lightweight they offer performance without compromising stability. A patented, dual locking, snap-in quick-release system enables fast and secure camera mounting and dismounting.
Benro BH-Series Ballheads provide a single action control for smooth movement and stable camera positioning.
5 Year Warranty (With Registration)
Specifications
| MAXIMUM LOAD | 17.6 lb (8 kg) |
| HEAD HEIGHT | 3.6 in (9.2 cm) |
| TILT RANGE | (-)45°/90° |
| DRAG CONTROL | No |
| SEPARATE PANNING LOCK | No |
| QUICK RELEASE (QR) PLATE | PH08 |
| BUBBLE LEVEL | Y |
| WEIGHT | 0.7 lb (0.31 kg) |
Benro BH2 Single Action Ballhead
$ 70.00
Benro BH2 Single Action Ballhead
Benro SKU: BH2 | Helix SKU: IDBH2
Overview
Benro BH Series ballheads are produced using the latest in precision machining and manufacturing technology to ensure smooth and secure operation. Ultra-small and lightweight they offer performance without compromising stability. A patented, dual locking, snap-in quick-release system enables fast and secure camera mounting and dismounting.
Benro BH-Series Ballheads provide a single action control for smooth movement and stable camera positioning.
5 Year Warranty (With Registration)
Specifications
| MAXIMUM LOAD | 22 lb (10 kg) |
| HEAD HEIGHT | 3.8 in (9.7 cm) |
| TILT RANGE | (-)45°/90° |
| DRAG CONTROL | No |
| SEPARATE PANNING LOCK | No |
| QUICK RELEASE (QR) PLATE | PH09 |
| BUBBLE LEVEL | Y |
| WEIGHT | 0.9 lb (0.4 kg) |
