Saramonic 2-Ch 3.5mm, XLR Microphone & 6.35mm Guitar Interface with Lightning Output Connector Professional Video, (SMARTRIG+DI)
$ 179.99
Saramonic 2-Ch 3.5mm, XLR Microphone & 6.35mm Guitar Interface with Lightning Output Connector Professional Video, (SMARTRIG+DI)
MFR SKU: SMARTRIG+DI | Helix SKU: SRSMARTRIGPDI
Overview
The SmartRig+ DI features three different kinds of inputs, and there are two of each: XLR, 1/4” (6.35mm), and 1/8“ (3.5mm). All of the inputs remain active when in use, and you can use 4 of them at the same time. The XLR inputs can supply condenser microphones with +48 volts of phantom power, which enables you to use almost any kind of microphone. The 1/4” (6.35mm) inputs are impedance-matched to get the best sound quality from guitars and basses. The 1/8“ (3.5mm) inputs can be used to connect 2 mini-plug microphones, which enables you to use microphones like the Saramonic SR-XLM1 clip-on lavalier mic, and the SR-M3 mini shotgun (both sold separately).
A Mono/Stereo switch on the SmartRig+ DI lets you choose how the channels will be mixed when connected to a device. When set to Mono, anything you plug in will be recorded to both channels. The Mono setting is useful when you’re just plugging in a single microphone, because the audio will be recorded to both channels. The Stereo setting is useful when you’re plugging two microphones or instruments, because both channels will be recorded as independent tracks. This gives you better editing options in post-production.
The multiple inputs on the SmartRig+ DI provide limitless creative potential. You can connect a guitar and microphone at the same time or plug in two microphones for music recording or podcasting. You can even connect the stereo outputs of a digital piano or synthesizer or attach a shotgun microphone and a wireless mic to vastly improve the sound quality of the videos you shoot. A built-in headphone jack lets you hear your music-making, audio recording, and video shooting apps, and two large gain knobs make it easy to set levels. The SmartRig+ DI is an affordable and ultra-portable device with impeccable sound quality that provides an impressive amount of functionality to a wide range of uses.
- High-quality 2-Channel Audio Interface for Apple iPhone, iPad, and iPod Touch
- Enables you to plug in 2 professional microphones or instruments to your Apple device in order to vastly improve the sound quality of videos you shoot, and the audio recorded with apps
- Ultra-compact, lightweight and easy to bring with you everywhere, included strap can be used to attach to selfie sticks, tripods, stands, stabilizers or belt, metal 1/4” 20 tripod thread on the back
- Two XLR inputs with +48v phantom power and 1/4” (6.35mm) instrument combo jacks and two 1/8“ (3.5mm) inputs, connect shotgun or lavalier microphones to improve sound for video
- Can be used to add a headphone jack to iPhones, 7 and newer
Specifications:
Frequency Response: 20Hz to 20kHz, +/-0.5dB
Distortion: Less than 0.01% @ 1kHz, -30dBu input
Signal to Noise Ratio: 80dB @ 1kHz, -30dBu input
Noise: -98dB full band (with Phantom Power)
Gain: +23dBu
Maximum Output Level: 2Vrms
Phantom Power: 48V
Phantom Max Current: 13mA
Channels: 2
Inputs: 2 x XLR + 1/4" (6.35mm) Combo Jack and 2 x 1.8” (3.5mm) TRS
Selectable Mixer: Mono or Stereo Output via Toggle Switch
Outputs: 1 x MFi Certified Lightning Output Cable and 1 x Female 1.8” (3.5 mm) Headphone Jack
Battery: 1 x 9-volt (Alkaline or Lithium)
Dimensions: 4.72" x 1.57" x 1.57" (120 x 40 x 40mm)
Weight: 4.6 oz (130g)
Saramonic 96-Channel Bodypack Transmitter Unit - TX9 (UwMic9 Lavalier Microphone)
$ 129.00 - Sold Out
Saramonic 96-Channel Bodypack Transmitter Unit - TX9 (UwMic9 Lavalier Microphone)
MFR SKU: UWMIC9TX9 | Helix SKU: SRUWMIC9TX9
Overview
The Saramonic TX9 is a wireless UHF bodypack transmitter and clip-on lavalier microphone bundle that provide stellar, broadcast-quality sound and are fully compatible with the dual-channel UwMic9 RX9 receiver (sold separately). The TX9 works right out of the box and is extremely easy to use. It’s ideal for DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. The TX9 features sturdy metal construction and delivers excellent sound quality in a low-cost package. It’s ultra-compact, lightweight, and easy to bring with you on every shoot.
The TX9 syncs with the RX9 receiver (sold separately) wirelessly through easy-to-use infrared sensors. The easy-to-read backlit LCD display lets you make quick adjustments to the intuitive menus in the brightest or darkest environments. The transmitter can be muted with the press of a button to give the person wearing it complete privacy, and the buttons can be “locked” when in use to prevent accidental muting or powering off.
This transmitter can be used with line-level audio, such as an output from a mixer. This can be useful at weddings and other events where you need to wirelessly transmit crystal-clear audio from a soundboard. The RF power output of the TX9 transmitter is also selectable. The “Low” setting lets you extend battery life in situations where the subject is close to the receiver. Medium and High are useful when the subject is going to be further away, or when you’re using the TX9 in an environment with more potential interference.
The included SR-M1 clip-on lavalier microphone features an omnidirectional pickup pattern that’sideal for use in video production because it captures sound equally no matter what direction it’s pointing when clipped to clothing.The microphone was designed to capture rich, crystal-clear sound and the transmitter features a locking BMP-type 1/8" (3.5mm) mic input to prevent the micfrom accidentally being unplugged. The UwMic9 TX9 is a high-quality transmitter with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Broadcast-quality UHF wireless beltpack transmitter and lavalier microphone for the RX9 dual receiver (sold separately)
- Works right out of the box with easy plug-and-play operation, lavalier mic, mic clip, foam windscreen, and belt clip are all included
- Professional SR-M1 omnidirectional lavalier microphone provides natural sound that’s ideal for video production
- Durable all-metal construction with easy-to-read backlit LCD display and easy-to-use menus and controls
- Offers up to 330-foot (100m) operating distance with infrared that makes it easy to sync channels with receiver
Specifications:
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
In The Box:
1 x TX9 belt-pack transmitter
1 x SR-M1 omnidirectional lavalier mic
1 x Alligator-style lavalier mic clip
1 x Fitted foam windscreen
1 x Belt clip
1 x SR-UMBC1 battery compartment
1 x Printed user manual
1 x Warranty card
Optional Accessories (Sold Separately):
- LM-WS Fur Windjammer for SR-M1 Lavalier 3-Pack
- SR-LMWS3 Replacement Foam Windscreens 3-Pack
- WM4C-MC1 Replacement Mic Clip
- SR-UMBC1 Replacement Battery Compartment
- SR-XM1 Swiveling Omnidirectional Condenser Microphone
- SR-UM10-MC2 Replacement Belt Clip
- SR-UM10-M1 Replacement SR-M1 Lavalier
- SR-RX9 UwMic9 Dual-Channel Camera-Mountable Receiver
Saramonic Blink 500 B1 Tx+Rx 2.4GHz Micro-Wireless Lavalier System W/Camera-Mountable Dual-Receiver
$ 149.00 - Sold Out
Saramonic Blink 500 B1 Tx+Rx 2.4GHz Micro-Wireless Lavalier System W/Camera-Mountable Dual-Receiver
MFR SKU: BLINK500B1 | Helix SKU: SRBLINK500B1
Overview
If you want an extremely small, feather-weight wireless microphone system that delivers broadcast-quality sound to use with cameras and mobile devices, with the ability to handle two wireless transmitters, nothing is capable of doing this except for the Saramonic Blink 500. This kit comes with a single clip-on wireless transmitter with a built-in mic, a professional lavalier microphone, an ultracompact dual-channel receiver that mounts to the shoe of your camera with both TRS and TRRS output cables. You can put a mic on one person, but if you ever need to put mics on two people, you can simply add a second wireless transmitter (sold separately) and it will work perfectly with the included dual receiver.
Tiny body, huge sound.
The Blink 500 B1 is impossibly compact and lightweight, yet it delivers crystal-clear professional sound quality. The versatile transmitter features an excellent sounding built-in microphone that captures voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. It also operates as a traditional bodypack transmitter with the included SR-M1 professional omnidirectional clip-on lavalier microphone, providing an even more professional and visually discreet miking solution.
So advanced, it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B1 is so technically advanced that it couldn't be easier to use. You just turn it on, and it works. But behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitter to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. ThatÕs why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The internal Lithium batteries get 5 hours of life from a charge with the included charging cables, and the USB-C ports can be used to power or recharge the units in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
Loves cameras & mobile devices equally.
Both TRS and TRRS output cables are included so the system will work perfectly with DSLR, mirrorless, and other kinds of cameras, as well as smartphones and tablets that have headphone jacks. The output of the receiver provides a strong, noise-free level, so when you plug it in you can adjust the input level of your camera to its lowest setting to avoid hearing the noisy preamp of your camera.
An ideal wireless system.
Portable, compact wireless microphone systems are completely essential tools for anyone who shoots video, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can ge yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. It's small enough to tuck away into any camera bag, backpack or even your pocket, so you can effortlessly bring it with you everywhere you go. The Blink 500 B1 system is perfect for people who only need one wireless mic right now but may need the option to expand and use two in the future. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Specifications:
Transmitter Specifications:
Frequency: 2.4GHz
Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
RF Output Power: 10 mW
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
Microphone: Built-In Pressure Operated Electret Condenser
Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
Mounting Clip: Built-In
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Weight: 1.2 oz (34g)
Receiver Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-In 1/4λ Wire Antenna
Buttons: On / Off / Pair
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C
Output: 1/8' 3.5mm Jack (Headphone Compatible)
Audio Output Level: 5dB
Indicator: 1 LED, Blue. Flashing quickly: Paring, Flashing: Not Paired with any TX, Solid Blue: Paired with TX
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.4 x 1.3 x .61” (62 x 33 x 15mm)
Weight: 1.09 oz (31g)
Saramonic Blink 500 B2 Ultracompact 2-Person Wireless Clip-On Mic System with Lavaliers & Dual Receiver
$ 199.00 - Sold Out
Saramonic Blink 500 B2 Ultracompact 2-Person Wireless Clip-On Mic System with Lavaliers & Dual Receiver
MFR SKU: BLINK500B2 | Helix SKU: SRBLINK500B2
Overview
If you want an extremely small, feather-weight wireless microphone system that delivers broadcast-quality sound to use with cameras and mobile devices, with the ability to handle two wireless transmitters so you can put mics on two separate people, nothing is capable of doing this except for the Saramonic Blink 500 B2. It comes with two clip-on wireless transmitters that have built-in mics, two professional lavalier microphones, and a dual-channel receiver that mounts to the shoe of your camera. You can put mics on two separate people, and it will work perfectly with the included ultracompact dual receiver.
Tiny body, huge sound.
The Blink 500 B2 is impossibly compact and lightweight, yet it delivers crystal-clear professional sound quality. The versatile transmitters feature excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. They also operate as traditional bodypack transmitters with the included SR-M1 professional omnidirectional clip-on lavalier microphones, providing even more professional and inconspicuous miking solutions.
So advanced it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B2 is so technically advanced that it couldn't be easier to use. You just turn it on, and it works. But behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitters with the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and intelligent LED displays that show you where they're set. The internal Lithium batteries get 5 hours of life from a charge with the included charging cables, and the USB-C ports can be used to power or recharge the units in the field with portable USB battery packs. The 10-milliwatt power of the transmitters gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
Loves cameras & mobile devices equally.
Both TRS and TRRS output cables are included so the system will work perfectly with DSLR, mirrorless, and other kinds of cameras, as well as smartphones and tablets that have headphone jacks. The output of the receiver provides a strong, noise-free level, so when you plug it in you can adjust the input level of your camera to its lowest setting to avoid hearing the noisy preamp of your camera.
An ideal wireless system.
Portable, compact wireless microphone systems are completely essential tools for anyone who shoots video, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use 2-person wireless system that won't slow them down. It's small enough to tuck away into any camera bag, backpack or even your pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Specifications:
Transmitter Specifications:
Frequency: 2.4GHz
Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
RF Output Power: 10 mW
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
Microphone: Built-In Pressure Operated Electret Condenser
Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
Mounting Clip: Built-In
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Weight: 1.2 oz (34g)
Receiver Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-In 1/4λ Wire Antenna
Buttons: On / Off / Pair
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C
Output: 1/8' 3.5mm Jack (Headphone Compatible)
Audio Output Level: 5dB
Indicator: 1 LED, Blue. Flashing quickly: Paring, Flashing: Not Paired with any TX, Solid Blue: Paired with TX
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.4 x 1.3 x .61” (62 x 33 x 15mm)
Weight: 1.09 oz (31g)
Saramonic Blink 500 B3 Wireless Clip-On Mic System with Lavalier & Dual Lightning Receiver for iPhone & iPad
$ 169.00 - Sold Out
Saramonic Blink 500 B3 Wireless Clip-On Mic System with Lavalier & Dual Lightning Receiver for iPhone & iPad
MFR SKU: BLINK500B3 | Helix SKU: SRBLINK500B3
Overview
The Saramonic Blink 500 B3 is an incredibly compact, lightweight, and professional sounding wireless microphone systems for the Apple iPhone and iPad. The included clip-on transmitter is small enough to clip directly to your shirt collar, and the included RXDi MFi Certified Lighting dual-channel receiver is so lightweight and unobtrusive that it won't get in your way at all. It can easily be used on devices that are mounted in handheld gimbals, and the receiver is even capable of accepting the signal from two microphones if you add another Blink 500 TX transmitter (sold separately).
Tiny body, huge sound.
The Blink 500 B3 is impossibly compact and lightweight, yet it delivers crystal-clear professional sound quality. The versatile transmitter features an excellent sounding built-in microphone that captures voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. It also operates as a traditional bodypack transmitter with the included SR-M1 professional omnidirectional clip-on lavalier microphone, providing an even more professional and visually discreet miking solution. The sleek, featherweight RXDi receiver plugs directly into the Lightning port of your Apple device and doesn't require any batteries or charging to operate. There are no controls to fuss with, either. You just plug it in, and it works.
So advanced, it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B3 is so technically advanced that it couldn't be easier to use. Even though there are no controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitter to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background with the Blink 500, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The transmitter's internal Lithium battery gets 5 hours of life from a charge with the included charging cables, and the USB-C port can be used to power or recharge the transmitter in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXDi receiver, included in your Blink 500 B3 kit changes this story. It's small and lightweight enough to remain mounted to your Apple device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage, and if you add a second Blink 500 TX transmitter (sold separately) you can easily put mics on two separate people.
An ideal wireless system.
Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. This system is perfect for people who only need one wireless mic right now but may need the option to expand and use two in the future. If you shoot video with an iPhone and a handheld gimbal, this is the best solution available for perfect sound from wireless transmitters. It's small enough to tuck away in a small pocket, so you can effortlessly bring the Blink 500 with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Transmitter Specifications:
Frequency: 2.4GHz
Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
RF Output Power: 10 mW
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
Microphone: Built-In Pressure Operated Electret Condenser
Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
Mounting Clip: Built-In
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Weight: 1.2 oz (34g)
Receiver Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: MFi Certified Lighting Apple Lightning Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic Blink 500 B4 2-Person Wireless Clip-On Mic System with Lavalier & Lightning Receiver for iPhone & iPad
$ 219.00 - Sold Out
Saramonic Blink 500 B4 2-Person Wireless Clip-On Mic System with Lavalier & Lightning Receiver for iPhone & iPad
MFR SKU: BLINK500B4 | Helix SKU: SRBLINK500B4
Overview
The Saramonic Blink 500 B4 is an incredibly compact, lightweight, and professional sounding two-person wireless microphone system that was made for the Apple iPhone and iPad. The two included transmitters are small enough to clip directly to shirt collars, and the included RXDi MFi Certified Lighting receiver is so lightweight and unobtrusive that it can easily be used in handheld gimbals. The Blink 500 B4 makes using multiple wireless microphones with Apple devices as easy as possible and it provides broadcast-quality sound in a package that's amazingly compact and lightweight.
Tiny body, huge sound.
The versatile sub-compact wireless transmitters that come with the Blink 500 B4 have excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. They also operate as traditional bodypack transmitters with the included SR-M1 omnidirectional clip-on lavalier microphones, providing an even more professional and inconspicuous miking solution. The impossibly compact RXDi dual-receiver plugs directly into the Lightning port of your Apple device and doesn't require any batteries or charging to operate. It doesn't have any controls to fuss with, either. You just plug it in, and it works.
So advanced, it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B4 is so technically advanced that it couldn't be easier to use. Even though there are very few controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitters to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The internal Lithium batteries get 5 hours of life from a charge, and the USB-C charging ports can be used to power or recharge the transmitter in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXDi receiver, included in your Blink 500 B4 kit changes this story. It's small and lightweight enough to remain mounted to your Apple device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage with the fantastic ability to put wireless mics on two separate people.
An ideal wireless system.
Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. If you shoot video with an iPhone and a handheld gimbal, this is the best solution available for perfect sound from two wireless transmitters. This system is small enough to tuck away in a small pocket, so you can effortlessly bring the Blink 500 with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Transmitter Specifications:
Frequency: 2.4GHz
Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
RF Output Power: 10 mW
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
Microphone: Built-In Pressure Operated Electret Condenser
Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
Mounting Clip: Built-In
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Weight: 1.2 oz (34g)
Receiver Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: MFi Certified Lighting Apple Lightning Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic Blink 500 B5 Wireless Clip-On Mic System with Lavalier & Dual USB-C Receiver for Android Devices & more
$ 169.00 - Sold Out
Saramonic Blink 500 B5 Wireless Clip-On Mic System with Lavalier & Dual USB-C Receiver for Android Devices & more
MFR SKU: BLINK500B5 | Helix SKU: SRBLINK500B5
Overview
The Saramonic Blink 500 B5 is an extremely compact, lightweight, and professional sounding wireless microphone system that was made to be used with mobile devices that have USB-C ports, like Android smartphones or tablets, computers, and more. This kit comes with a single wireless transmitter with a built-in mic, a professional clip-on lavalier microphone, and a dual-channel receiver that's so lightweight and unobtrusive it can easily be used in handheld gimbals. You can put a mic on 1 person, but if you ever need to put mics on 2 people, you can simply add a second wireless transmitter (sold separately) and it will work perfectly with the included dual receiver.
Tiny body, huge sound.
The Blink 500 B5 is impossibly compact and lightweight, yet it delivers crystal-clear professional sound quality. The versatile transmitter features an excellent sounding built-in microphone that captures voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. It also operates as a traditional bodypack transmitter with the included SR-M1 professional omnidirectional clip-on lavalier microphone, providing an even more professional and inconspicuous miking solution. The RXUC receiver plugs directly into the USB-C port of your device and doesn't require any batteries or charging to operate. It doesn't have any controls to fuss with, either. You just plug it in, and it works. It's compatible with a wide range of products that have USB-C ports, from Android smartphones and tablets to modern Apple Mac computers and Windows PCs, to Chromebooks and even the 2018 iPad Pro tablets.
So advanced, it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B5 is so technically advanced that it couldn't be easier to use. Even though there are very few controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitter to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why the Blink 500 transmitter has easy-to-use gain buttons to raise or lower the levels, and an intelligent LED display shows you where they're set. Its internal Lithium battery gets 5 hours of life from a charge, and its USB-C charging port can be used to power or recharge it in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXUC included in your Blink 500 B5 kit changes this story. It's small and lightweight enough to remain mounted to your smartphone and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage, and if you add a second Blink 500 transmitter (sold separately) you can easily put mics on two people.
An ideal wireless system.
Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. This system is perfect for people who only need one wireless mic right now but may need the option to expand and use two in the future. If you shoot video with a mobile device and a handheld gimbal, this is the best solution available for perfect sound from wireless transmitters. It's small enough to tuck away in a small pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Transmitter Specifications:
Frequency: 2.4GHz
Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
RF Output Power: 10 mW
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
Microphone: Built-In Pressure Operated Electret Condenser
Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
Mounting Clip: Built-In
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Weight: 1.2 oz (34g)
Receiver Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: USB-C Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic Blink 500 B6 2-Person Wireless Clip-On Mic System with Lavalier & USB-C Receiver for Android Devices & more
$ 219.00 - Sold Out
Saramonic Blink 500 B6 2-Person Wireless Clip-On Mic System with Lavalier & USB-C Receiver for Android Devices & more
MFR SKU: BLINK500B6 | Helix SKU: SRBLINK500B6
Overview
The Saramonic Blink 500 B6 is an incredibly compact, lightweight, and professional sounding two-person wireless microphone system that was made to be used with mobile devices that have USB-C ports, like Android smartphones or tablets, computers, and more. The two included transmitters are small enough to clip directly to shirt collars, and the included RXUC receiver is so lightweight and unobtrusive that it can easily be used in handheld gimbals. The Blink 500 B6 makes using multiple wireless microphones as easy as possible and it provides broadcast-quality sound in a package that's incredibly compact and lightweight.
Tiny body, huge sound.
The versatile sub-compact wireless transmitters that come with the Blink 500 B6 have excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. They also operate as traditional bodypack transmitters with the included SR-M1 omnidirectional clip-on lavalier microphones, providing an even more professional and inconspicuous miking solution. The impossibly compact RXUC dual-receiver plugs directly into the USB-C port of your device and it doesn't require any batteries or charging to operate. There are no controls to fuss with, either. You just plug it in, and it works.
So advanced, it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B6 is so technically advanced that it couldn't be easier to use. Even though there are very few controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitters to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The internal Lithium batteries get 5 hours of life from a charge, and the USB-C charging ports can be used to power or recharge the transmitter in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXUC included in your Blink 500 B6 kit changes this story. It's small and lightweight enough to remain mounted to your device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage with the fantastic ability to put wireless mics on two separate people.
An ideal wireless system.
Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. If you shoot video with a mobile device and a handheld gimbal, this is the best solution available for perfect sound from wireless transmitters. This system is small enough to tuck away in a small pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Transmitter Specifications:
Frequency: 2.4GHz
Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
RF Output Power: 10 mW
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
Microphone: Built-In Pressure Operated Electret Condenser
Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
Mounting Clip: Built-In
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Weight: 1.2 oz (34g)
Receiver Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: USB-C Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic Blink 500 RXDi Dual-Channel Lightning Wireless Microphone Receiver for iPhone and iPad
$ 89.00 - Sold Out
Saramonic Blink 500 RXDi Dual-Channel Lightning Wireless Microphone Receiver for iPhone and iPad
MFR SKU: BLINK500RXDI | Helix SKU: SRBLINK500RXDI
Overview
The Saramonic Blink 500 RXDi is an incredibly compact, lightweight, and professional sounding wireless dual-receiver that was made for the Apple iPhone and iPad. It's so lightweight and unobtrusive that it can easily be used in handheld gimbals and can handle up to two separate Blink 500 TX wireless transmitters (sold separately). The RXDi makes using multiple wireless microphones with Apple devices as easy as possible. It connects directly to the Lightning port, and no batteries or charging is required. The RXDi provides broadcast-quality sound in an incredibly compact and lightweight package.
So advanced, it's effortless.
Some wireless microphone receivers are complicated to operate, but the Blink 500 RXDi is so technically advanced that it couldn't be easier to use. There are no controls to adjust, but the device does a lot behind the scenes to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing with transmitters is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXDi changes this story. It's small and lightweight enough to remain mounted to your Apple device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage when used with Blink 500 TX transmitters (sold separately).
Blink 500: a diverse ecosystem.
There's a large family of innovative Blink 500 wireless microphone products and they're are all ultra-compact, lightweight, and fully compatible with the Blink 500 RXDi. The Blink 500 TX is a tiny wireless transmitter with a high-quality built-in microphone, an external mic input (it comes with an external lavalier mic), a built-in Lithium battery, a USB-C charging port, gain buttons and multicolored LEDs. The Blink 500 RX is a dual-receiver that was designed to be mounted to the shoe of a camera and can handle up to two 500 TX transmitters at the same time. The Blink 500 RXUC is very similar to the RXDi except it has a USB-C connector for Android smartphones or tablets and modern Apple Mac and PC computers. It works perfectly with handheld gimbals, too. All of the receivers can handle up to two Blink 500 TX transmitters at the same time.
An ideal wireless system.
Even if you shoot video with a smartphone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. If you shoot video with an iPhone and a handheld gimbal, the Blink 500 RXDi is the best solution available for perfect sound from up to two wireless transmitters (sold separately). The RXDi is small enough to tuck away in a small pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: MFi Certified Lighting Apple Lightning Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic Blink 500 RXUC Dual-Channel USB-C Wireless Microphone Receiver for Android Mobile Devices & More
$ 89.00 - Sold Out
Saramonic Blink 500 RXUC Dual-Channel USB-C Wireless Microphone Receiver for Android Mobile Devices & More
MFR SKU: BLINK500RXUC | Helix SKU: SRBLINK500RXUC
Overview
The Saramonic Blink 500 RXUC is an incredibly compact, lightweight, and professional sounding wireless dual-receiver that was made for devices with USB-C ports. It's compatible with a wide range of products, from Android smartphones and tablets to modern Apple Mac computers and Windows PCs, to Chromebooks and even 2018 iPad Pro tablets. It's so lightweight and unobtrusive that it can easily be used in handheld gimbals and can handle up to two separate Blink 500 TX wireless transmitters (sold separately). The RXUC makes using multiple wireless microphones as easy as possible. It connects directly to USB-C ports, so no batteries or charging is required. The RXUC provides broadcast-quality sound in an incredibly compact and lightweight package.
So advanced, it's effortless.
Some wireless microphone receivers are complicated to operate, but the Blink 500 RXUC is so technically advanced that it couldn't be easier to use. There are no controls to adjust, but the device does a lot behind the scenes to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing with transmitters is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXUC changes this story. It's small and lightweight enough to remain mounted to your mobile device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage when used with Blink 500 TX transmitters (sold separately).
Blink 500: a diverse ecosystem.
There's a large family of innovative Blink 500 wireless microphone products and they're are all ultra-compact, lightweight, and fully compatible with the Blink 500 RXUC. The Blink 500 TX is a tiny wireless transmitter with a high-quality built-in microphone, an external mic input (it comes with an external lavalier mic), a built-in Lithium battery, a USB-C charging port, gain buttons and multicolored LEDs. The Blink 500 RX is a dual-receiver that was designed to be mounted to the shoe of a camera and can handle up to two 500 TX transmitters at the same time. The Blink 500 RXDi is very similar to the RXUC except it has a Lightning connector for the Apple iPhones and iPad. It works perfectly with handheld gimbals, too. All of the receivers can handle up to two Blink 500 TX transmitters at the same time.
An ideal wireless system.
Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. If you shoot video with an Android smartphone and a handheld gimbal, the Blink 500 RXUC is the best solution available for perfect sound from up to two wireless transmitters (sold separately). The RXUC is small enough to tuck away in a small pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: USB-C Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic C-XLR 3.5mm Female TRS to XLR Male Audio Adapter for Professional Cameras, Mixers, Recorders and more
$ 10.00 - Sold Out
Saramonic C-XLR 3.5mm Female TRS to XLR Male Audio Adapter for Professional Cameras, Mixers, Recorders and more
MFR SKU: C-XLR | Helix SKU: SRCXLR
Overview
The Saramonic C-XLR is a versatile audio adapter that lets you easily connect microphones and audio sources that have 3.5mm male jacks into the XLR inputs on professional video and cinema cameras, audio recorders, mixers, and more. It's compatible with battery-powered, active or dynamic microphones, wireless receivers, 3.5mm line-level devices and more.
Tough and Lightweight Lifesaver
You need dependable, solidly built equipment and the C-XLR delivers with tough, all-brass construction and premium gold-plated connectors. The input is fully compatible with both regular or locking 3.5mm connectors and even is even threaded to conveniently secure locking connections. Whether you need to connect a battery-powered 3.5mm lavalier mic directly to a pro video camera, plug an active headset microphone into a sound system, use a battery-powered mini-plug shotgun microphone with a field mixer, connect a wireless receiver like the Saramonic Blink 500 (B1/B2) into a cinema camera, or connect a 3.5mm line signal to an PA mixer, the C-XLR will make it happen. It is an invaluable problem solver to have in your audio kit.
Specifications:
Adapter Type: 1/8“ (3.5mm) TRS Female to XLR Male
Input Compatibility: Standard and Locking 3.5mm Connectors
Dimensions: 0.9 x 3” (23 x 76.5mm)
Weight: 3.1oz (87.9g)
Saramonic C-XLR+ 3.5mm Female TRS to XLR Male Audio Adapter with Phantom Power to Plug-In-Power Converter for Pro Cameras, Mixers, Recorders and more
$ 20.00 - Sold Out
Saramonic C-XLR+ 3.5mm Female TRS to XLR Male Audio Adapter with Phantom Power to Plug-In-Power Converter for Pro Cameras, Mixers, Recorders and more
MFR SKU: C-XLR+ | Helix SKU: SRCXLRP
Overview
The Saramonic C-XLR+ is a useful audio adapter that lets you easily connect microphones and audio sources that have 3.5mm male jacks into the XLR inputs on professional video and cinema cameras, audio recorders, mixers, and more. It's compatible with active, battery-powered microphones and passive microphones, such as the lavalier mics that come with wireless systems. If you engage phantom power on the camera or other device, a built-in converter in the C-XLR+ changes the current from +48-volts to the 3 to 5-volt current that plug-in-powered and some passive 3.5mm microphones require. This happens automatically. There are no controls on the C-XLR+ that need your attention.
Tough and Lightweight Lifesaver
You need dependable, solidly built equipment and the C-XLR+ delivers with tough, all-brass construction and premium gold-plated connectors and even is even threaded to conveniently secure locking connections. The input is fully compatible with both regular and locking 3.5mm connectors. Whether you need to connect a 3.5mm lavalier mic directly to a pro video camera, plug a headset microphone into a sound system, use a plug-in-powered mini-plug shotgun microphone with a field mixer, connect a wireless receiver like the Saramonic Blink 500 (B1/B2) into a cinema camera, or connect a 3.5mm line signal to an PA mixer, the C-XLR+ will make it happen. It is an invaluable problem solver to have in your audio kit and can even expand the use of your 3.5mm plug-in-powered, or lavalier microphones into your professional devices.
Specifications:
Length: 3.94” (100mm)
Width: 2.76” (70mm)
Height: 2.76” (70mm)
Weight: 0.6 (17g)
Saramonic CamMic+ On-Camera Battery-Powered Shotgun Microphone for DSLR, Mirrorless & Video Cameras or Smartphones & Tablets
$ 99.00 - Sold Out
Saramonic CamMic+ On-Camera Battery-Powered Shotgun Microphone for DSLR, Mirrorless & Video Cameras or Smartphones & Tablets
MFR SKU: CAMMIC+ | Helix SKU: SRCAMMICP
Overview
The Saramonic CamMic+ is a lightweight yet durably built, AA-battery powered shotgun microphone that delivers clear, broadcast-quality sound to DSLR, mirrorless, video cameras and mobile devices. Its directional pickup pattern excels at capturing sounds in front of the mic, while rejecting sounds to the sides and rear. It’s a premium quality microphone with impressively quality construction at an affordable price that’s incredibly easy to use, and it can be used with a wide variety of cameras and mobile devices.
A stand out feature of the CamMic+ design is the unique microphone shockmount. The wiry shockmounts on some competing microphones are flimsy and prone to bending, this can cause some unwanted audio issues and change the way the microphone picks up sound. The integrated shockmount of CamMic+ is robust and features a sleek, sweeping and stable design.
A dual layered uniquely designed bullet like windscreen is included, giving the CamMic+ its unique and interesting look. It features a sturdy gasket which aids in blocking wind noise, helps to protect the microphone from things like weather and dust, and keeps it securely fastened in place while on the go.The output cable of the CamMic+ is removable. An 1/8" (3.5mm) TRS cable for connecting to cameras is included, in addition to a 1/8" (3.5mm) TRRS cable for connecting to smartphones and tablets. On the back of the mic there is a 3-position switch for OFF, ON, and an 80Hz high-pass filter that enables you to eliminate unwanted rumble sounds and make dialog more intelligible when shooting in noisy environments. A built-in camera shoe-mount features a metal 1/4 20 tripod thread at the base that gives you near limitless mounting options.
Powered by a single AA battery, the CamMic+ is the ideal choice for cameras that don’t provide plug-in power. Allowing you to shoot for days without replacing the battery. For those filmmakers worried about conserving as much camera/mobile device power as possible, the CamMic+ would be the mic of choice. There is also a Blue LED indicator light that will illuminate when the mic is on and turn red when your battery needs to be replaced.
- Provides clear, broadcast-quality sound to DSLR, Mirrorless and Video Cameras or Smartphones and Tablets
- AA Battery-powered for cameras that lack plug-in-power or to save camera battery life
- Easy-to-use with plug-and-play operation. Includes two output cables: one for cameras, one for mobile devices
- Sleek camera-mountable design that is lightweight and compact, yet features an impressively solid construction
- Double thickness windscreen and low-cut filter improves intelligibility of dialog in any situation
Specifications:
Type: Condenser MicrophonePolar Pattern: Cardioid (Uni-Directional)
Frequency Range: 40Hz - 10kHz
Sensitivity: -45 ±3dB (0dB = 1V/Pa, @ 1kHz)
Maximum Input SPL: f=1kHz, THD<5% (106dB)
Output Impedance: 200ohm
Signal to Noise Ratio: 80dB SPL
Power Requirements: One AA Battery
Weight: 3.77oz (107g)
Dimensions: 6.47 x 2.12 x 3.29” (164.4 x 53.9 x 83.5mm)
Product Weight: 0.107kg
Product Length: 16.4cm
Product Width: 8.4cm
Product Height: 5.4cm
Package Weight: 0.327kg
Package Length: 30cm
Package Width: 13cm
Package Height: 7.5cm
1-Year Warranty
Saramonic CamMic-WS Slide-On Furry Windscreen for the Saramonic CamMic
$ 79.00
Saramonic CamMic-WS Slide-On Furry Windscreen for the Saramonic CamMic
MFR SKU: CAMMIC | Helix SKU: SRCAMMIC
Overview
The Saramonic CamMic-WS is a furry windscreen that is designed for higher outdoor wind conditions, when the foam windscreen just won’t do. Its long-haired exterior and nylon interior provides dual-layered wind protection. Drastically improving wind diffusion and reducing wind noise up to 40dB.
Designed for the Saramonic CamMic, it easily slips right over the CamMic’s foam windscreen. It is an ideal solution to get the best quality sound in high wind recording environments.
Specifications:
Length: 3.94” (100mm)
Width: 2.76” (70mm)
Height: 2.76” (70mm)
Weight: 0.6 (17g)
Saramonic CamMic-WS Slide-On Furry Windscreen for the Saramonic CamMic
$ 18.00 - Sold Out
Saramonic CamMic-WS Slide-On Furry Windscreen for the Saramonic CamMic
MFR SKU: CAMMICWS | Helix SKU: SRCAMMICWS
Overview
The Saramonic CamMic-WS is a furry windscreen that is designed for higher outdoor wind conditions, when the foam windscreen just won’t do. Its long-haired exterior and nylon interior provides dual-layered wind protection. Drastically improving wind diffusion and reducing wind noise up to 40dB.
Designed for the Saramonic CamMic, it easily slips right over the CamMic’s foam windscreen. It is an ideal solution to get the best quality sound in high wind recording environments.
Specifications:
Length: 3.94” (100mm)
Width: 2.76” (70mm)
Height: 2.76” (70mm)
Weight: 0.6 (17g)
Saramonic DK4B Miniature Professional Omnidirectional Lavalier Mic w/ Locking 3.5mm TRS Connector for Sony Wireless Transmitters
$ 125.00 - Sold Out
Saramonic DK4B Miniature Professional Omnidirectional Lavalier Mic w/ Locking 3.5mm TRS Connector for Sony Wireless Transmitters
Mfr SKU: DK4B | Helix SKU: SRDK4B
Overview
| The Saramonic DK4B is a premium broadcast lavalier microphone for wireless systems that will greatly enhance the sound quality of your productions with its truly excellent sonic performance. Its omnidirectional polar pattern provides 360-degrees of sound pickup and is ideal for capturing natural sounding dialog for video productions, interviews, speech and many other applications and perfect for acoustic instruments. Deigned with a flat, low-profile form factor and a premium, professional look. It is visually unobtrusive and looks great on camera when exposed and easily is concealed. Perfect for taping under clothing and hiding in hair or on costumes. Wide and Warm Sound The DK4 lavalier is specially designed to enhance the character of dialog and capture the detailed subtleties of musical instruments. It delivers a crisp, full-frequency response with refined, smooth sound and warmth of tone. It features a wide pick-up response, both direct and off-axis from the microphone capsule, enhancing sensitivity and minimizing unwanted noise. Perfect Sound Anywhere It doesn’t matter if you’re using the DK4 indoors in a quiet room or outside in a storm—you’re always going to get perfect sound because every critically important windscreen accessory you need are all included. The microphone, clips and all four included windscreens all fit neatly into pockets in the included compact soft-shell case. Designed with Care It’s the little things that make a big difference in the quality of a product, and the DK4 is loaded with them. Good examples of this are the form-fitted, slide-in mic clips that keeps the DK4 securely in place, even when the cable is jerked on. And the elastic fastening clips on the furry windscreens, allowing you to wrap the windscreen closely to the mic for added protection from the wind, and to prevent it from falling off. For Sony Wireless The locking gold-plated 3.5mm connector is compatible with Sony UWP, UWP-D and WRT series wireless transmitters. |
Features
| Premium low-profile lavalier microphone for wireless and recorders designed for broadcast and instruments that delivers superior sound quality and advanced sonic performance |
| Tailored frequency response designed to enhance the character and intelligibility of speech, and detailed subtleties of musical instruments |
| Omnidirectional pickup pattern is ideal for capturing natural sounding dialog for broadcast video and audio productions |
| Premium included accessory suite includes: 2x foam windscreens, 2x furry high-wind windscreens, 2x alligator-style mic clips and a lightweight yet protective case |
| Locking 3.5mm connector compatible with Sony UWP, UWP-D and WRT series wireless system belt pack transmitters |
Specifications
Acoustic Principle: Electret Condenser
Polar Pattern: Omnidirectional
Sensitivity: -40±2dB RL=2.2KΩ Vs=2.0V( 1KHz 0dB=1V/Pa)
Frequency Range: 20Hz to 16kHz
Max Input SPL :105dB
Signal-to-Noise Ratio: 58dB or more
Output Impedance: Max. 2.2KΩ 1KHz (RL=2.2KΩ)
Operating Temperature: -20°C - 60°C
Connector: Gold-Plated Locking 3.5mm
Cable Length: 70.87” (180cm)
Weight: 0.49oz (14g)
Compatible Wireless Transmitters:
Sony: UWP, UWP-D and WRT Series Transmitters
Sony: PMC-A10, PMC-D10, PMC-D50, PMC-D100, PMC-D1
In The Box
1 x DK4B Low-Profile Omnidirectional Lavalier Microphone
2 x Fitted Slide-In Alligator-Style Mic Clip
2 x Foam Windscreens
2 x High-Wind Furry Windscreens with Elastic Fastening Clasps
1 x Reusable Cable Wrap
1 x Protective Soft-Shell Case with 2 Mesh Pockets
1 x Carabiner Clip
1 x Warranty Card
Saramonic LavMicro 2M Dual Lavalier Microphones for DSLRs, Mirrorless, Video Cameras, Smartphones, Tablets & more
$ 69.00 - Sold Out
Saramonic LavMicro 2M Dual Lavalier Microphones for DSLRs, Mirrorless, Video Cameras, Smartphones, Tablets & more
MFR SKU: LAVMICRO2M | Helix SKU: SRLAVMICRO2M
Overview
The Saramonic LavMicro 2M is a set of two high-quality clip-on wired lavalier microphones that share one cable and connect to a single 1/8“ (3.5mm) mic input. This enables you to put wired lavalier mics on two people and plug into a single mic input on a camera or an audio recorder. The microphones deliver broadcast-quality sound to DSLRs, mirrorless, cinema, and video cameras, as well as audio recorders, smartphones, tablets, and other devices. It features a 23-foot (7m) cable, which gives you plenty of length to position subjects in front of a camera, around a table for a podcast recording, etc.
Both lavalier microphones have omnidirectional pickup patterns, which is desirable when capturing sound for video and audio recordings, because they don’t reject sound in any direction. This makes for a more even, natural sound quality. The LavMicro M2 features a battery, which means you can use it with a large variety of equipment, and when used with devices like smartphones, the battery is unnecessary and can easily be switched off.
All of the accessories you need to capture excellent audio are included. The alligator-style mic clips provide a firm grasp to collars and clothing. The fitted foam windscreens diffuse unwanted wind noise. An included 1/4” adapter lets you use the LavMicro M2 with cameras like the Blackmagic Design Cinema Camera. The reusable cable ties help you keep your wires tidy. An included miniature screwdriver is provided for accessing the battery, and the compact soft-shell zippered case is exactly what you need for storage and transport.
- 2 high-quality wired lavalier microphones that connect to a single mic input
- Provides broadcast-quality sound DSLRs, mirrorless cameras, audio recorders, smartphones, tablets, and other devices
- A low-cost solution for putting wired clip-on lavalier microphones on 2 people and plugging into a single mic input and achieving excellent sound quality
- The omnidirectional pickup pattern of the mics is ideal for video productions and audio recordings
- 23-foot (7m) cable provides a generous amount of length for creative options, includes compact soft-shell zippered case for storage and transport
Specification:
Type: Condenser MicrophonePolar Pattern: Omni-directional
Frequency Response: 50Hz - 18kHz
Sensitivity: -32 +/-3dB (0dB = 1V/Pa, at 1kHz)
Signal to Noise Ratio: Less than -75dB
Battery Type: One LR44 3V Battery
Weight: 2.5oz (70g)
Cable Length: 19.7’ (6m)
Output: 1/8” (3.5mm) TRS
1-Year Warranty
Saramonic LavMicro Lavalier Microphone for DSLRs, Mirrorless, Video Cameras, Smartphones & more
$ 25.00
Saramonic LavMicro Lavalier Microphone for DSLRs, Mirrorless, Video Cameras, Smartphones & more
MFR SKU: LAVMICRO | Helix SKU: SRLAMICRO
Overview
The Saramonic LavMicro is a wired omnidirectional clip-on lavalier microphone that delivers broadcast-quality sound and can be used with DSLRs, mirrorless and video cameras, as well as audio recorders, smartphones, tablets, and other devices. An included 1/4” adapter even lets you use it with cameras like the Blackmagic Design Cinema Camera. The LavMicro features a 20-foot (6m) cable, which gives you ample room to position your subject in front of the camera.
The LavMicro has an omnidirectional pickup pattern which is desirable when capturing sound for video and audio recordings because it doesn’t reject sound in any direction. This makes for a more even, natural sound quality. The LavMicro features a battery, which means you can use it with a large variety of equipment, and when used with devices like smartphones, the battery is unnecessary and can easily be switched off.
All of the accessories you need to capture excellent audio are included. The alligator-style mic clip provides a firm grasp to collars and clothing. The fitted foam windscreen diffuses unwanted wind noise. The reusable cable wraps help you keep your wires tidy. And an included miniature screwdriver and extra screws are provided for accessing the battery.
- Provides broadcast-quality sound to DSLRs, mirrorless cameras, audio recorders, smartphones, tablets, and other devices
- Includes a wired clip-on lavalier microphone with an omnidirectional pickup pattern that’s ideal for video and audio recordings because it doesn’t reject sound in any direction
- Includes all of the accessories you need to capture excellent audio (clip, windscreen, etc.), 20-foot (6m) cable gives you a generous amount of length for creative options
- Optional battery power makes it compatible with a wide variety of equipment, when used with smartphones the battery is unnecessary and can be switched off
- A low-cost solution for achieving excellent sound quality
Specifications:
Polar Pattern: OmnidirectionalFrequency Range: 50Hz to 18kHz
Signal to Noise: 78 dB SPL
Sensitivity: -32 dB ± 3 dB / 0 dB= 1 V/Pa, 1 kHz
Connector: 1/8" (3.5 mm) TRS/TRRS combo connector
Cable Length: 20' (6.0 m)
Saramonic LavMicro U2 Ultracompact Clip-On Lavalier Microphone for Cameras & Mobile Devices with a 19.7-foot (6m) Cable, Included Battery, Mic Clip, Windscreen & More
$ 89.00 - Sold Out
Saramonic LavMicro U2 Ultracompact Clip-On Lavalier Microphone for Cameras & Mobile Devices with a 19.7-foot (6m) Cable, Included Battery, Mic Clip, Windscreen & More
MFR SKU: LAVMICROU2 | Helix SKU: SRLAVMICROU2
Overview
The Saramonic LavMicro U2 is an ultracompact clip-on lavalier microphone that to captures rich, broadcast-quality sound. It features a 3.5mm TRRS output connector and a dedicated switch that toggles between camera and phone output modes, switching the output to either TRS, or TRRS. Allowing users to plug directly into the mic input on cameras, smartphones, tablets, audio recorders, computers, mixers, and any other device with a 3.5mm input. A 3.5mm to 1/4” adapter is also included to plug into larger input jacks. It has a long 19.7-foot (6m) built-in cable that provides plenty of length to achieve creative techniques, like standing at an optimal distance in front of your device’s camera, sit down interviews in a natural setting, and narrative filmmaking where concealing the microphone is crucial.
Capture great sound with ease
Everything you need to capture perfect sound comes included. A battery comes installed so you can use the LavMicro U2 with cameras and devices that do not provide power to the microphone. The omnidirectional pickup pattern captures sound equally in all directions, so you don’t need to worry about the direction the mic is pointing when you clip it to a shirt. The included alligator-style mic clip holds the LavMicro U2 firmly, and the foam windscreen diffuses unwanted wind noise. A storage pouch with a locking drawstring holds everything neatly.
- Ultracompact clip-on lavalier microphone that plugs directly into cameras, audio recorders, smartphones, tablets, and other devices and delivers rich, broadcast-quality sound
- Built-in 19.7-foot (6m) cable provides an ample amount of length for creative recording techniques like speaking in front of the camera, sit-down interviews and concealing the microphone
- Omnidirectional pickup pattern captures sound equally in every direction, so you don't need to worry about what direction the mic is pointing when clipped to your shirt
- Powered by an included battery, built-in switch to change between phone and camera modes, compatible with 3.5mm and 1/4” inputs
- Includes an alligator-style mic clip that securely affixes to collars and other clothing, a foam windscreen to diffuse wind noise, and a locking drawstring pouch that neatly holds everything
Specifications:
Type: Electret Condenser
Polar Pattern: Omnidirectional
Frequency Range: 65Hz to 18kHz
Sensitivity: -42±3dB (0dB=1V/Pa, at 1KHz)
Signal-to-Noise Ratio: 78dB SPL
Output Impedance: 1000 Ohm or Less
Battery Type: LR626 -AG4
Output Connector: Gold-Plated 1/8“ (3.5mm) TRRS
Cable Length: 19.7’ (6m)
Weight: 1.64 oz (46.5g)
Saramonic LavMicro UC Omnidirectional Lavalier Microphone for USB-C Android Smartphones, Tablets, Computers & more
$ 99.00 - Sold Out
Saramonic LavMicro UC Omnidirectional Lavalier Microphone for USB-C Android Smartphones, Tablets, Computers & more
MFR SKU: LAVMICRO-US | Helix SKU: SRLAMICROUS
Overview
The Saramonic LavMicro UC is an ultra-compact clip-on lavalier microphone that captures pristine sound quality and connects directly to Android devices or PC and Mac computers through the USB Type-C port. This provides a purely digital, low-noise signal transfer that results in rich, broadcast-quality sound, whether you’re shooting video or recording audio with the apps of your choice.
The cable of the LavMicro UC is 6.25 feet (1.9m), which is the ideal length for selfie-stick video, or for neatly tucking your device away in a pocket while you record. A high-quality DeltaSigma analog-to-digital converter is incorporated into the cable. The outstanding audio quality of the LavMicro UC is achieved with the combination of its superior microphone capsule, its high-end analog-to-digital converter, and its digital USB Type-C connector.
The pickup pattern of the LavMicro UC is omnidirectional, which provides smooth and even sound no matter what direction it’s pointing in when clipped to your collar or clothing. Not only do you not need to worry about what direction the mic is pointing in, you also don’t need to worry about batteries. The LavMicro UC provides simple plug-and-play operation with all of your audio recording and video shooting apps.
Specifications:
Polar Pattern: Omnidirectional
Output: USB Type-C
Frequency Response: 30Hz - 20kHz
Sensitivity: -42+/-3DB (1KHz, 0dB=1v/Pa)
Gain: 0-35 dB
Sampling Frequency: 44.1kHz/ 48 kHz
Bitrate: 16Bit / 24Bit – This is not accurate is it 16 Bit/44.1 or 48K or 24 Bit/96K
Power Requirements: Supplied by Device
Transducer Principle: Pre-Polarized Condenser Microphone
Weight: 25g (0.88oz)
Cable Length: 5’ 7” (1700mm)
Product Weight: 0.88oz (25g)
Saramonic LM-WS Furry Windscreen for Saramonic Lavalier Microphones (3-Pack)
$ 10.00 - Sold Out
Saramonic LM-WS Furry Windscreen for Saramonic Lavalier Microphones (3-Pack)
MFR SKU: LM-WS | Helix SKU: SRLMWS
Overview
The LM-WS is a furry windscreen for higher wind conditions, when a foam windscreen just won’t do. Designed for the Saramonic SR-UM10-M1 & SR-UM9-M1 lavaliers that are included with UwMic9, VmicLink5, UwMic10 and UwMic15 wireless systems. It also works with the other Saramonic lavaliers and many other standard-sized lavalier microphones between 6-8mm in diameter. The LM-WS is an ideal solution in high-wind recording environments when lavaliers are worn on the outside of clothing.
- Designed for the SR-UM10-M1 & SR-UM9-M1 Lavaliers (included with UwMic9, VmicLink5, UwMic10 and UwMic15)
- Works with the Saramonic WM4C-M1 (included with SR-WM4C), LavMic, LavMicro, LavMicro DI & LavMicro UC
- Slips Over Lavalier
- Improves Wind Rejection
- Fits Most Standard Lavalier Mics
Saramonic Magic Boom Pole 5-Section 10' Aluminum Boom Pole with 3/8", 1/4"-20, & 5/8" Mounts
$ 149.00 - Sold Out
Saramonic Magic Boom Pole 5-Section 10' Aluminum Boom Pole with 3/8", 1/4"-20, & 5/8" Mounts
MFR SKU: MAGICBOOMPOLE | Helix SKU: SRMAGICBOOMPOLE
Overview
The Saramonic Magic Boom Pole is a versatile and professional boom pole that allows you to position your microphones as close as possible to the sounds you need to capture while remaining at a distance or out of frame. It features 5 telescoping sections and adjusts from 2.5 to 10 feet in length (0.78 to 3 m). Long enough to discretely boom any scene and compact enough to take anywhere, easily fitting into a backpack or small case. It's constructed with precision black-anodized aluminum, which makes it both lightweight and incredibly durable.
The top mounting screw can be switched between 3/8“ for standard shockmounts and 1/4"-20 for attaching on-camera microphones. The 1/4"-20 thread is also the same sized used on tripods, which makes it possible to use Magic Boom Pole as a monopod for your camera. Lightweight and ergonomically designed, the entire bottom section features a large and padded foam handgrip, perfect for comfortable extended use.
Magic Boom Pole doesn’t have an internal cable, but it was designed to be easily converted to a cabled boom pole. You can quickly remove the top and bottom caps and feed a standard XLR cable through it. Integrated cable notches on both ends allow you to reattach the caps. The Magic Boom Pole features a dense, rubbery base which is useful when you rest it on the floor between takes. The base also features a female 3/8“ thread where you can mount other equipment. Easy-twist locks make it possible to quickly shorten or lengthen the Magic Boom Pole and they will confidently hold each section in place.
- A professional 5-section telescoping boom pole made with lightweight precision black-anodized aluminum that extends from 2.5 to 10 feet (0.78 to 3 m)
- Top mount is easily reversible from 3/8" for standard shockmounts to a 1/4"-20 tripod thread for on-camera mics and can be used as a monopod for a camera
- Large and comfortable foam-padded grip area, dense rubbery base for resting the pole between takes, padded shoulder bag and 5/8" mounting adapter both included
- Easy-twist locks make it possible to quickly shorten or lengthen the Magic Boom Pole, a simple twist confidently fastens each section in place
- Top and bottom caps can easily be removed to run a standard-sized XLR cable through the Magic Boom Pole, so it can be used as a cabled or uncabled boom pole
Saramonic NV5-WS Replacement Furry Windscreen for SR-NV5 and MixMic
$ 29.00 - Sold Out
Saramonic NV5-WS Replacement Furry Windscreen for SR-NV5 and MixMic
MFR SKU: MV5-WS | Helix SKU: SRMV5WS
Overview
The NV5-WS is a replacement furry windscreen for the SR-NV5 and MixMic. Designed for higher wind conditions, when the foam windscreen just won’t do. It is an ideal solution to get the best quality sound in high-wind recording environments.
- Designed for the SR-NV5, SR-NV5X & MixMic Microphones
- Slips Over Foam Windscreen
- Improves Wind Diffusion
- Dual Layered Wind Protection
- Reduces Wind Noise up to 40dB
Specifications:
Length: 5.9” (150 mm)
Width: 2.17” (55 mm)
Height: 2.17” (55 mm)
Weight: 0.34 oz (9.63g)
Saramonic Smart V2M Portable Interface with 2 Lavalier Microphones for Apple Lightning (iPhone/iPad), Android USB-C & Computers
$ 89.00 - Sold Out
Saramonic Smart V2M Portable Interface with 2 Lavalier Microphones for Apple Lightning (iPhone/iPad), Android USB-C & Computers
MFR SKU: SMARTV2M | Helix SKU: SRSMARTV2M
Overview
The Saramonic Smart V2M is an ultra-portable audio interface and lavalier microphone bundle that’s small enough to fit in a pocket, yet delivers premium, broadcast-quality sound for two people and can be connected directly to iPhones and iPads via the Lightning port, Android devices with USB-C ports, and Windows PCs and Apple Macintosh computers via USB-A ports. Professional journalists, vloggers, podcasters, and content creators can use the Smart V2M to capture perfect sound while shooting video, live-streaming, or recording audio in the field by connecting directly to their mobile devices or computers. This is an ultra-lightweight and completely inconspicuous audio solution that doesn’t make any compromises in sound quality.
Two high-quality wired omnidirectional lavalier microphones are included, one with a 9.8-foot (3m) cable and the other with a 16.4-foot (5m) cable to give you flexible positioning options. Three output cables are included as well. One features an Apple-Certified MFi Lightning connector for direct connection to iPhones and iPads. Another features a USB-C connector for Android devices that have USB-C ports. You also get a standard USB-A output cable for connection to Windows PCs and Mac computers. The Smart V2M features high-quality built-in microphone preamps and a premium analog-to-digital converter that provide the best possible sound quality, no matter what mobile device or computer you connect it to.
No batteries or charging is required to operate the Smart V2M. The ultra-compact design features durable, all-metal construction so it can travel with you anywhere. The lavalier microphones have locking connectors that prevent them from accidentally getting unplugged. The microphone inputs on the Smart V2M are also compatible with microphones that are wired with a locking 1/8" (3.5mm) connector that are wired for Sennheiser or Rode. Meaning, you can choose from hundreds of lavaliers, headsets and specialty mics in that wiring configuration to expand or enhance your system. A headphone jack is provided for monitoring during recording and playback, and dedicated buttons control the volume.
A Mono/Stereo switch lets you choose how the audio is mixed. Stereo mode is useful for keeping the two connected microphones on separate tracks, which gives you more options for how you can edit the sound in audio or video editing software. Stereo mode is also useful for recording music. Mono mode is often preferable when connecting a single microphone, or you want to mix both microphones into one stereo output for applications like live-streaming or podcasts. Sturdy integrated loops on the Smart V2M enable you to mount it to stands or your belt with included hook-and-loop fasteners. When you need to deliver broadcast quality sound without compromises using the most compact and lightweight equipment possible, the Smart V2M is a completely flexible solution that’s compatible with a wide variety of mobile devices and computers.
- 2-person audio solution that fits in a pocket delivers professional broadcast-quality sound directly into iPhones, iPads, Android devices, Windows PCs and Mac Computers
- Includes 2 wired lavalier mics (one with a 9.8-foot cable and the other with a 16.4-foot cable) and 3 output cables (Lightning for Apple devices, USB-C for Android, USB-A for PC and Mac computers)
- High-quality built-in microphone preamps and analog-to-digital converter provide premium sound quality with no batteries or charging required for operation
- Features ultra-compact design with durable all-metal construction, omnidirectional lavalier microphones with locking connectors to prevent accidental unplugging and stereo mode for music recording
- Dedicated 1/8” (3.5mm) headphone output for real-time monitoring during recording (app dependent) and playback, integrated volume buttons
Specifications:
Frequency Response: 20Hz to 20kHz
Gain: 0-30dBu
Sampling Frequency: 44.1 kHz, 48 kHz
Bitrate: 16Bit, 24Bit
Inputs: 2 x 1/8" (3.5mm)
Outputs: 1 x Micro USB port, 1 x 1/8" (3.5mm) headphone jack
Power Requirements: Supplied by iOS devices, Android devices, Windows and Mac computers
Cables: Micro USB to Apple MFi Certified Lightning, Type-C, USB-A
Dimension: 2.5 x 2.5 x 0.98" (6.5 x 6.5 x 2.5 cm)
Weight: 8.82 oz (250 g)
Saramonic SmartMic+ Compact Directional Microphone with TRRS Connector for Apple iPhone/iPad & Android Smartphones/Tablets
$ 45.00 - Sold Out
Saramonic SmartMic+ Compact Directional Microphone with TRRS Connector for Apple iPhone/iPad & Android Smartphones/Tablets
MFR SKU: SMARTMIC+ | Helix SKU: SRSMARTMICP
Overview
The Saramonic SmartMic+ is an ultra-lightweight and compact directional microphone that plugs directly into the headphone jack on smartphones and tablets to vastly improve the sound quality of the videos you shoot and the audio you capture. The directional pickup pattern excels at focusing on the sounds in front of it, while rejecting sounds to the sides and rear. Producing audio that is intelligible and clear, even in busy environments.
Using the SmartMic+ couldn’t be easier. You simply plug it into your mobile device with its gold-plated TRRS connector and start creating. There are no batteries to install or charge, and there are no levels to set. It’s truly plug-and-play. A gold-plated headphone jack on the back enables you to easily listen to your audio without needing to remove the SmartMic+. You can also listen to the sound as you record, but this capability needs to be supported by the app you’re using.
A snug-fitting foam windscreen is included that won’t accidentally fall off when in use or transit. SmartMic+ can be positioned both facing forward, when using the selfie camera on your device or facing outward, when taking advantage of your device’s high-end camera. A small bracket prevents it from turning away when plugged in. It captures audio that is rich and detailed, but the unit itself is ultra-compact, small enough to fit in your pocket and weighs only 40 grams, so you can easily bring it with you everywhere you go. The SmartMic+ is also rugged, made with durable metal, so you can rest assured that it’s well equipped for your adventures.
- Provides broadcast-quality sound to smartphones and tablets by plugging into your mobile device’s headphone socket when shooting video, recording audio, live-streaming, vlogging, podcasting and more
- Lightweight and ultra-portable yet rugged, durable metal microphone that provides simple plug-and-play usage, never requires batteries or charging
- 1/8” (3.5mm) Headphone jack for real-time monitoring while making recordings (app dependent) and listening to playback without removing microphone
- Directional pickup pattern clearly captures sounds in front of the mic while rejecting sounds to the sides and rear and can be positioned facing forward when using the selfie camera, or facing outward
- Includes a snug-fitting foam windscreen, a small built-in bracket prevents SmartMic+ from accidentally rotating when plugged in
Specifications:
Microphone Type: Directional Condenser
Polar Pattern: Cardioid
Outputs: 1 x 1/8“ (3.5 mm) headphone jack
Connectivity: 1 x 1/8“ (3.5 mm) male TRRS connector
Frequency Response: 75Hz to 20kHz
Sensitivity: -35 ±3dB (0dB=1V/Pa at 1KHz)
Maximum Input SPL: f=1kHz, THD<5% (105 dB)
Output Impedance: 600 Ohm
Signal to Noise Ratio: 75 dB SPL
Dimensions: 2.8 x 1 x 1.9” (71.6 x 25.5 x 48.6 mm)
Weight: 1.41 oz (40 g)
Saramonic SmartMic+ Di Compact Directional Microphone with Lightning Connector for Apple iPhone & iPad
$ 75.00
Saramonic SmartMic+ Di Compact Directional Microphone with Lightning Connector for Apple iPhone & iPad
MFR SKU: SMARTMIC+DI | Helix SKU: SRSMARTMICPDI
Overview
The Saramonic SmartMic+ Di is an ultra-lightweight and compact microphone that plugs directly into the Lightning port on the iPhone or iPad and vastly improves the sound quality of the videos you shoot and the audio you capture. The directional pickup pattern excels at focusing on the sounds in front of it, while rejecting sounds to the sides and rear. Producing audio that is intelligible and clear, even in busy environments.
Using SmartMic+ Di couldn’t be easier. You simply plug it into your mobile device and start creating. There are no batteries to install or charge, and there are no levels to set. It’s truly plug-and-play. A gold-plated headphone jack on the back enables you to easily listen to your audio without needing to remove the SmartMic+ Di. You can also listen to the sound as you record, but this capability needs to be supported by the app you’re using.
A snug-fitting foam windscreen is included that won’t accidentally fall off when in use or transit. When you need to use SmartMic+ Di in windy environments, a sensibly sized furry windscreen is also included that can be pulled over the foam windscreen for ultimate protection from wind noise. The SmartMic+ Di can be positioned both facing forward, when using the selfie camera on your Apple device or facing outward, when taking advantage of your device’s high-end camera. It captures audio that is rich and detailed, but the unit itself is ultra-compact, small enough to fit in your pocket and weighs only 40 grams, so you can easily bring it with you everywhere you go. The SmartMic+ Di is also rugged, made with durable metal, so you can rest assured that it’s well equipped for your adventures.
- Provides broadcast-quality sound to iPhones and iPads by plugging into the Lightning port for shooting video, recording audio, live-streaming, vlogging, podcasting and more
- Lightweight and ultra-portable yet rugged, durable metal microphone that provides simple plug-and-play usage, never requires batteries or charging
- 1/8” (3.5mm) Headphone jack for real-time monitoring while making recordings (app dependent) and listening to playback without removing microphone
- Directional pickup pattern clearly captures sounds in front of the mic while rejecting sounds to the sides and rear and can be positioned facing forward when using the selfie camera, or facing outward
- Includes both a snug-fitting foam windscreen for indoor use and a sensibly sized furry wind protector for outdoor use
Specifications:
Microphone Type: Directional Condenser
Polar Pattern: Cardioid
Outputs: 1 x 1/8“ (3.5 mm) headphone jack
Connectivity: 1 x Lightning male connector
Frequency Response: 75Hz to 20kHz
Sensitivity: -35 ±3dB (0dB=1V/Pa at 1KHz)
Maximum Input SPL: f=1kHz, THD<5% (105 dB)
Output Impedance: 600 Ohm
Signal to Noise Ratio: 75 dB SPL
Dimensions: 2.8 x 1 x 1.9” (71.6 x 25.5 x 48.6 mm)
Weight: 1.41 oz (40 g)
Saramonic SmartMic+ UC Compact Directional Microphone with USB-C Connector for Android Smartphones & Tablets
$ 75.00 - Sold Out
Saramonic SmartMic+ UC Compact Directional Microphone with USB-C Connector for Android Smartphones & Tablets
MFR SKU: SMARTMIC+UC | Helix SKU: SRSMARTMICPUC
Overview
The Saramonic SmartMic+ UC is an ultra-lightweight and compact microphone that plugs directly into the USB-C port on Android smartphones and tablets and vastly improves the sound quality of the videos you shoot and the audio you capture. The directional pickup pattern excels at focusing on the sounds in front of it, while rejecting sounds to the sides and rear. Producing audio that is intelligible and clear, even in busy environments.
Using SmartMic+ UC couldn’t be easier. You simply plug it into your mobile device and start creating. There are no batteries to install or charge, and there are no levels to set. It’s truly plug-and-play. A gold-plated headphone jack on the back enables you to easily listen to your audio without needing to remove the SmartMic+ UC. You can also listen to the sound as you record, but this capability needs to be supported by the app you’re using.
A snug-fitting foam windscreen is included that won’t accidentally fall off when in use or transit. When you need to use SmartMic+ UC in windy environments, a sensibly sized furry windscreen is also included that can be pulled over the foam windscreen for ultimate protection from wind noise. SmartMic+ UC can be positioned both facing forward, when using the selfie camera on your Android device or facing outward, when taking advantage of your device’s high-end camera. It captures audio that is rich and detailed, but the unit itself is ultra-compact, small enough to fit in your pocket and weighs only 40 grams, so you can easily bring it with you everywhere you go. The SmartMic+ UC is also rugged, made with durable metal, so you can rest assured that it’s well equipped for your adventures.
- Provides broadcast-quality sound to Android smartphones and tablets that have USB-C ports when shooting video, recording audio, live-streaming, vlogging, podcasting and more
- Lightweight and ultra-portable yet rugged, durable metal microphone that provides simple plug-and-play usage, never requires batteries or charging
- 1/8” (3.5mm) Headphone jack for real-time monitoring while making recordings (app dependent) and listening to playback without removing microphone
- Directional pickup pattern clearly captures sounds in front of the mic while rejecting sounds to the sides and rear and can be positioned facing forward when using the selfie camera, or facing outward
- Includes both a snug-fitting foam windscreen for indoor use and a sensibly sized furry wind protector for outdoor use
Specifications:
Microphone Type: Directional Condenser
Polar Pattern: Cardioid
Outputs: 1 x 1/8“ (3.5 mm) headphone jack
Connectivity: 1 x USB Type-C male connector
Frequency Response: 75Hz to 20kHz
Sensitivity: -35 ±3dB (0dB=1V/Pa at 1KHz)
Maximum Input SPL: f=1kHz, THD<5% (105 dB)
Output Impedance: 600 Ohm
Signal to Noise Ratio: 75 dB SPL
Dimensions: 2.8 x 1 x 1.9” (71.6 x 25.5 x 48.8 mm)
Weight: 1.41 oz (40 g)
Saramonic SmartMixer Smartphone Mixer with Dual Microphones, Handgrip & Headphone Output for Apple iPhone & Android
$ 119.00 - Sold Out
Saramonic SmartMixer Smartphone Mixer with Dual Microphones, Handgrip & Headphone Output for Apple iPhone & Android
MFR SKU: SMARTMIXER | Helix SKU: SRSMARTMIXER
Overview
Smartphones can shoot incredible looking video, but the audio quality they provide is usually a massive disappointment. The Saramonic SmartMixer is a compact mixer and microphone kit that seamlessly integrates with your phone and vastly improves the sound quality of the videos you shoot. The included hand grip and mount improves the stability of your videos as well.
The lightweight and compact SmartMixer runs on a single 9-volt battery and comes with two low-profile condenser microphones that plug into it. These mics can swivel up and down and rotate to point at people and other sound sources. A mini-XLR input on the side with +48 volts phantom power makes it possible to use any professional microphone, such as a shotgun or handheld interview microphone with your smartphone.
An easy-to-use stepped gain knob lets you set perfect levels, and a backlit display enables you to always see your audio meters and remaining battery level even in the darkest or brightest environments. A dedicated switch toggles between recording and playback modes, so you can easily listen to your videos through the SmartMixer’s headphone jack. The versatile smartphone clamp lets you to shoot in either landscape or portrait mode for vertical video and it can be adjusted to fit smartphones up to 3.6” (9.1 cm) wide with a case, which will accommodate even the largest handheld devices. A shoe mount is provided at the top to attach microphones, wireless receivers or lights, and a tripod thread at the base gives you further mounting options.
- All-in-one solution for improving smartphone video sound and stabilization
- Includes microphones, output and input cables, phone clamp and grip
- Can provide +48 volts of phantom power to professional XLR mics
- Compatible with Apple iPhones and Android devices with 1/8“ (3.5mm) headphone jacks
- Shoot in either cinematic landscape or vertical video portrait mode
Specifications:
Signal to Noise Ratio: 82 dB @ 1 kHz, -30 dBu input
Distortion: Less than 0.03% @ 1 kHz, -30 dBu input
Input 1 Gain: 15 dB
Input 2 and Mini XLR Jack Gain: 15 dB
Microphone Inputs 1 & 2 Power: +5V Microphone Power
XLR Mini Input Power: +48V Phantom Power (On/Off)
VU Meter: -18 dB to +3 dB in 3 dB increments
Power Requirements: 9V alkaline or lithium battery
Assembled Dimensions: 3.74 x 1.38 x 11.73” (95 x 35 x 298mm)
Assembled Weight: 26.1 oz (739.92g)
Mixer Dimensions: 3.7 x 2.5 x 1.4" (95 x 35 x 65 mm)
Mixer Weight: 5.5 oz (155g)
Smartphone Grip and Holder Dimensions: 10.2 x 1.7 x 1.1" (26 x 4.3 x 2.8cm)
Smartphone Grip and Holder Dimensions Weight: 10.8 oz (306g)
Saramonic SmartRig+ 2-Ch Audio Interface with XLR, 1/4" & 1/8” Inputs for iPhone, iPad, Android Smartphones & Tablets or DSLR, Mirrorless & Video Cameras
$ 129.00
Saramonic SmartRig+ 2-Ch Audio Interface with XLR, 1/4" & 1/8” Inputs for iPhone, iPad, Android Smartphones & Tablets or DSLR, Mirrorless & Video Cameras
MFR SKU: SMARTRIG+ | Helix SKU: SRSMARTRIGP
Overview
The Saramonic SmartRig+ is a compact 2-channel audio interface that enables you to connect any combination of professional microphones, guitars or instruments to DSLRs and video cameras, as well as iPhones, iPads, iPod Touches and Android devices that feature a headphone jack. It’s an ultra-portable, lightweight device that vastly improves the sound quality of the videos you shoot. It also lets you create broadcast-quality audio recordings on your mobile device for podcasting and news gathering. In addition, you can use powerful music-making apps to their full potential by connecting real instruments and professional microphones to your mobile device.
The SmartRig+ features three different kinds of inputs, and there are two of each: XLR, 1/4” (6.35mm), and 1/8“ (3.5mm). All of the inputs remain active, and you can use 4 of them at the same time. The XLR inputs can supply condenser microphones with +48 volts of phantom power, which enables you to use almost any kind of microphone. The 1/4” (6.35mm) inputs are impedance-matched to provide the best sound quality from electric guitars and basses, and acoustic instruments with pickups.
A Mono/Stereo switch on the SmartRig+ lets you choose how the channels will be mixed when connected to a camera or mobile device. When set to Mono, anything you plug in will be recorded to both channels of the camera or mobile device. The Mono setting is useful when you’re just plugging in a single microphone, because the audio will be recorded to both channels on the camera or mobile device. The Stereo setting is useful when you’re plugging two microphones or instruments, because both channels will be recorded as independent tracks. This gives you better editing options in post-production.
If you shoot video on your smartphone, you can connect professional shotgun and lavalier mics to vastly improve your sound quality. The built-in preamps provide clean sound, and if your camera lacks a headphone output, you can use the jack on the SmartRig+. Two nicely-sized gain control knobs allow you to dial in perfect levels with ease. The SmartRig+ is an affordable and ultra-portable device with impeccable sound quality that provides an impressive amount of functionality to a wide range of uses.
Specifications:
Frequency Response: 20Hz to 20kHz, +/-0.5dB
Distortion: Less than 0.01% @ 1kHz, -30dBu input
Signal to Noise Ratio: 80dB @ 1kHz, -30dBu input
Noise: -98dB full band (with Phantom Power)
Gain: +23dBu
Maximum Output Level: 2Vrms
Phantom Power: 48V
Phantom Max Current: 13mA
Channels: 2
Inputs: 2 x XLR + 1/4" (6.35mm) Combo Jack and 2 x 1.8” (3.5mm) TRS
Selectable Mixer: Mono or Stereo Output via Toggle Switch
Outputs: 1 x Male 1/8” (3.5mm) TRRS Output Cable and 1 x Female 1.8” (3.5 mm) Headphone Jack
Selectable Output: TRS for Camera/Recorder or TRRS for Mobile Devices via Toggle Switch
Battery: 1 x 9-volt (Alkaline or Lithium)
Dimensions: 4.72" x 1.57" x 1.57" (120 x 40 x 40mm)
Weight: 4.6 oz (130g)
Saramonic SmartRig+UC Professional 2-Channel Audio Interface with XLR, 1/4"" & 1/8"" Inputs for USB Type-C Android Smartphones & Tablets, PCs & more
$ 179.00
Saramonic SmartRig+UC Professional 2-Channel Audio Interface with XLR, 1/4"" & 1/8"" Inputs for USB Type-C Android Smartphones & Tablets, PCs & moreMFR
SKU: SMARTRIG+DI | Helix SKU: SRSMARTRIGPDI
Overview
The Saramonic SmartRig+UC is a portable two-channel microphone, guitar & instrument audio interface for USB Type-C devices. It is designed to let you record professional quality audio by connecting professional microphones, guitars and other instruments to your smartphone, tablets, PCs and more.
Two independent channels allow you to connect and control gain on multiple microphones, guitars or instruments at the same time. The interface also features 3 types of inputs to accommodate any set up; two XLR mic inputs that combo to 2 1/4" (6.35mm) guitar/instrument inputs, and two 1/8" (3.5mm) inputs for connecting any instrument or microphone.
The three inputs on the SmartRig+UC provide unlimited creative potential. You can connect a guitar and microphone at the same time, or plug in two microphones for music recording, podcasting, or journalistic work. You can even connect the stereo outputs of a digital piano or synthesizer or attach a shotgun and a wireless mic to vastly improve the sound quality of the videos you shoot with your mobile device.
The SmartRig+UC also provides +48V phantom power for professional condenser microphones and includes a 3.5mm headphone output for real-time sound monitoring. The two large gain control thumbwheels make it easy to set precise levels. Two recording options let you toggle between Mono and Stereo output modes as necessary.
Powered by one 9V battery, the SmartRig+UC does not use your portable device’s power. Giving you more time to create and perform. The SmartRig+UC also features a 3/8” thread on the back of the device for nearly limitless rigging options and the Included strap make it easy to attach to a selfie stick, tripod or mic stand.
- Two-Channel Portable Audio Interface for USB Type-C and Android Devices
- Two XLR Microphone with +48V & 1/4” (6.35mm) Instrument Combo Inputs and Two 1/8" (3.5mm) Inputs
- 3.5mm Headphone Monitoring Output with REC/PLAY switch
- Connect Shotgun, Lavalier, or Wireless Microphones to Improve Sound for Video
- Compatible with USB-C Android Devices, Smartphones, Tablets, Laptops, and PCs
Specifications:
Frequency Response: 20Hz to 20kHz, +/-0.5dB
Distortion: Less than 0.01% @ 1kHz, -30dBu input
Signal to Noise Ratio: 80dB @ 1kHz, -30dBu input
Noise: -98dB full band (with Phantom Power)
Gain: +23dBu
Maximum Output Level: 2Vrms
Phantom Power: 48V
Phantom Max Current: 13mA
Channels: 2
Inputs: 2 x XLR + 1/4" (6.35mm) Combo Jack and 2 x 1.8” (3.5mm) TRS
Selectable Mixer: Mono or Stereo Output via Toggle Switch
Outputs: 1 x Male USB-C Output Cable and 1 x Female 1.8” (3.5 mm) Headphone Jack
Battery: 1 x 9-volt (Alkaline or Lithium)
Dimensions: 4.72" x 1.57" x 1.57" (120 x 40 x 40mm)
Weight: 4.6 oz (130g)
Saramonic SmartRig-UC Professional Audio Interface with XLR & 1/4"" Inputs for USB Type-C Android Smartphones & Tablets, PCs & more
$ 119.00
Saramonic SmartRig-UC Professional Audio Interface with XLR & 1/4"" Inputs for USB Type-C Android Smartphones & Tablets, PCs & more
MFR SKU: SMARTRIG-UC | Helix SKU: SRSMARTRIGUC
Overview
The Saramonic SmartRig UC is a portable microphone, guitar & instrument audio interface for USB Type-C devices. It is designed to let you record professional quality audio by connecting a professional microphone, guitar or other instruments to your smartphone, tablets, PCs and more. You can connect a guitar or microphone for music recording, podcasting or journalistic work. You can even attach a shotgun, lavalier or wireless mic to vastly improve the sound quality of the videos you shoot with your mobile device.
Specifications:
Frequency Response: 20Hz to 20kHz, +/-0.5dB
Distortion: Less than 0.01% @ 1kHz, -30dBu input
Signal to Noise Ratio: 80dB @ 1kHz, -30dBu input
Noise: -98dB full band (with Phantom Power)
Gain: +23dBu
Maximum Output Level: 2Vrms
Phantom Power: 48V
Phantom Max Current: 13mA
Channels: 1
Inputs: 1 x XLR + 1/4" (6.35mm) Combo Jack
Outputs: 1x Male USB-C Output Cable and 1 x Female 1.8” (3.5 mm) Headphone Jack
Battery: 1 x 9-volt (Alkaline or Lithium)
Dimensions: 3.65" x 1.61" x 1.65" (88 x 41 x 42mm)
Weight: 2.65 oz (75g)
Saramonic SoundBird T3 Professional Shotgun Microphone with Li-Ion Battery, Low-Cut & Hi-Boost Filters, -10dB Pad, Shock Mount, Windscreen, XLR Cable, Hard Case & More
$ 299.00
Saramonic SoundBird T3 Professional Shotgun Microphone with Li-Ion Battery, Low-Cut & Hi-Boost Filters, -10dB Pad, Shock Mount, Windscreen, XLR Cable, Hard Case & More
MFR SKU: SOUNDBIRDT3 | Helix SKU: SRSOUNDBIRDT3
Overview
The Saramonic SoundBird T3 is an advanced professional shotgun microphone that delivers clear, broadcast-quality sound and provides a comprehensive set of features with a premium suite of included accessories. An internal rechargeable Li-Ion battery provides power for up to 150-hours, and it can also be powered by external phantom power. The all-brass construction is extremely durable and helps to reduce radio frequency interference. The gold-plated XLR output provides the best possible signal transfer and resists corrosion. At 11.1” the SoundBird T3 is the ideal size for use on a camera, boom pole or stand.
What you need to sound the best
Several built-in controls let you achieve the best possible sound quality in a variety of situations. A Low-Cut button eliminates distracting deep bass sounds like the rumble from HVAC, footsteps and traffic noise. A High-Boost button compensates for frequencies that are lost when you use wind protection and increases vocal intelligibility. A -10dB Pad makes it possible to capture loud sounds without clipping. All of the buttons are illuminated so you can easily see the settings, and an On/Off button changes color based on power source and battery level. Your settings are saved when you turn the mic on and off.
A travel-ready suite of premium accessories
You need many accessories to use a shotgun microphone properly, and instead of making additional purchases, all of these accessories are all included with SoundBird T3. You get an SR-SMC2 shock mount for attaching to the shoe of a camera or a boom pole. You also get a 2-foot (61cm) XLR output cable, a dedicated stand mount, a storage pouch, a foam windscreen, a MicroUSB charging cable, a hard-shell travel case with a handle and protective foam inserts and a reusable cable strap. You will have all of the essentials for capturing the best possible sound quality for your productions.
- An advanced professional shotgun microphone with multiple filters that delivers clear, broadcast-quality sound and includes an array of useful accessories with a hard travel case
- Built-in illuminated buttons: Low-Cut filter removes unwanted rumble sounds, High-Boost adds high frequencies that are lost with wind protection and increases vocal intelligibility, -10dB Pad captures loud sounds
- Powered by internal rechargeable Li-Ion battery with 150-hour run-time or with external phantom power, illuminated On/Off button changes color based on power source and battery level
- Durable solid brass construction prevents radio-frequency interference, gold-plated XLR connector resists corrosion and provides the best possible signal transfer
- Includes a premium shock mount to attach to cameras or boom poles, a dedicated stand mount, storage pouch, foam windscreen, 2-foot (61cm) XLR output cable, hard travel case and more
Specifications:
Polar Pattern: Cardioid
Frequency Range: 75Hz to 20kHz
Sensitivity: -38 ± 3dB (0dB-1V/Pa, at 1kHz 1.5V 2.2K)
Output Impedance: 150ohm
Dynamic Range: 125dB (per IEC651)
Maximum SPL: f=1kHz, THD<1% 105dB
Signal-to-Noise Ratio: 80dB SPL (per IEC651)
High-Pass Filter: 150Hz
Pad: -10dB
High Frequency Boost: +6dB
Material: Brass
Power Requirements: 48V Phantom Power or Built-in Lithium Battery
Battery Life: 150 Hours
Output Connection: 3-pin XLR, Balanced Output Between Pin 2 (+), Pin 3 (-) and Pin 1 (Ground)
Diameter: 0.86” (2.2cm)
Length: 11.1” (28.2cm)
Weight: 8.48oz (240.5g)
Saramonic SoundBird V1 Professional Supercardioid Shotgun Microphone with High-Pass Filter, -10dB Pad, Shock Mount, Foam Windscreen & Short XLR Output Cable
$ 199.00
Saramonic SoundBird V1 Professional Supercardioid Shotgun Microphone with High-Pass Filter, -10dB Pad, Shock Mount, Foam Windscreen & Short XLR Output Cable
MFR SKU: SOUNDBIRDV1 | Helix SKU: SRSOUNDBIRDV1
Overview
The Saramonic SoundBird V1 is a professional shotgun microphone that delivers premium, broadcast-quality sound, provides advanced features and comes with a suite of useful accessories. It features a supercardioid, directional pickup pattern allows you to clearly capture sounds in front of the microphone and from a distance, while rejecting unwanted sound from sides and rear. The all-brass construction is both incredibly durable and helps to reduce radio-frequency interference and the finish is both attractive and non-reflective. So, you can be sure it won’t catch the light, and add a glare to your shot. The XLR output is gold-plated to resist corrosion and provide the best possible signal transfer. The 10.7” length is the perfect size to either mount to a camera or use on boom poles and stands.
Shine a light on excellent sound
You will always know what settings are being used on your versatile SoundBird V1 because the built-in buttons are illuminated. The first button activates the high-pass filter, which removes unwanted low-frequency sounds, like the rumble of HVAC systems, footsteps and traffic noise. The second button activates the -10dB pad, which enables you capture louder sounds without distortion. The third button is On/Off, which controls the internal AA battery. When you power SoundBird V1 with external phantom power, the On/Off button illuminates green. When powering with an internal AA battery, it illuminates blue. When the battery is low, it illuminates red. SoundBird V1 also remembers your button settings when turned off and on.
Must-have accessories are included
There are several useful accessories included in the box. You get an adjustable premium shock mount, which allows you to attach the SoundBird V1 to the shoe of a camera or on to a boom pole or stand. The shock mount eliminates vibration and handling noise. A foam windscreen is also included, which diffuses rushing air noise when used indoors, and gentle breezes when used outdoors. A 2-foot (61cm) XLR cable is also included, which is the ideal length when mounting to a camera.
- Professional shotgun microphone that delivers premium, broadcast-quality sound for video production, interviews, filmmaking, YouTube videos and more
- Features a built-in high-pass filter that removes unwanted low-frequency sounds and a -10dB pad for capturing loud sounds, both are controlled with dedicated illuminated buttons
- Powered with an internal removable AA battery or external phantom power, illuminated On/Off button changes color based on power source and battery level
- Durable solid brass construction prevents radio-frequency interference, gold-plated XLR connector resists corrosion and provides the best possible signal transfer
- Includes a foam windscreen, 2-foot (61cm) XLR output cable, and a premium shock mount to attach directly to a camera, stand, or a boom pole
Specifications:
Microphone Type: Condenser
Polar Pattern: Supercardioid
Frequency Range: 50Hz to 20kHz
Sensitivity: -32±3dB (0dB-1V/Pa, at 1kHz)
Signal-to-Noise Ratio: 80dB SPL
Maximum SPL: 132dB
High-Pass Filter: 200Hz
Pad: -10dB
Power Requirements: 48V Phantom Power or 1 x AA Battery
Operating Temperature: 23°F to 122F (-5°C to 50°C)
Output Connection: 3-pin XLR, Balanced Output Between Pin 2 (+), Pin 3 (-) and Pin 1 (Ground)
Diameter: 0.78” (20mm)
Length: 10.7” (272mm)
Weight: 6.88oz (195g)
Saramonic SR-AX100 Battery-Free 2-Channel On-Camera 1/8” (3.5mm) Audio Mixer for DSLR, Mirrorless & Video Cameras
$ 39.00
Saramonic SR-AX100 Battery-Free 2-Channel On-Camera 1/8” (3.5mm) Audio Mixer for DSLR, Mirrorless & Video Cameras
MFR SKU: SR-AX100 | Helix SKU: SRSRAX100
Overview
The Saramonic SR-AX100 is an ultra-compact, two-channel audio mixer that makes it possible to connect and mix two microphones to DSLR, mirrorless, and video cameras that only have a single mic input and it doesn’t require power to operate. A built-in shoe mount on the base lets you attach the AX100 to your camera, and a 1/4-20 tripod thread makes it possible to easily attach it to camera cages, tripods and more.
There are three 1/8“ (3.5mm) (1 stereo and 2 mono) inputs on the back of the AX100 for connecting battery-powered microphones and wireless microphone receivers. The two attenuator knobs on the front of the AX100 make it easy to adjust the levels of the microphones that are plugged in, and the knobs feature stepped indents for precise adjustments. A Mono/Stereo switch lets you control how the microphones are recorded to your camera. Stereo mode separates the audio into individual left and right channels on your camera, perfect for getting two separate mic signals to mix in post-production. In Mono mode, they are mixed together which is useful when you have two mics plugged in, but you want the audio mixed to both left and right channels in your camera.
The top and sides of the AX100 feature durable shoe mounts, which acts as a bracket that transforms the single shoe on your camera into three, giving you convenient places to confidently mount lights, microphones, and wireless receivers. The AX100 is so small and lightweight that you can easily bring it with you everywhere you go, and its all-metal construction means it’s built like a tank and prepared for travel.
Please note: Microphones that do not run on batteries are not compatible.
- Allows you to plug and mix 2 microphones into cameras with only 1 mic input
- Ultra-compact and operates without batteries
- Integrated bottom shoe mount with metal 1/4-20 tripod thread
- Large stepped level control knobs with precise adjustment, durable all-metal construction
- Durable construction with 3 additional shoe mounts for attaching microphones, lights, and more
Specifications:
Inputs: 1 x 1/8" (3.5 mm) stereo mini-jack input, 2 x 1/8" (3.5 mm) mono mini-jack inputs
Output: 1 x 1/8" (3.5 mm) stereo mini-jack output
Input Level: -35 dBu minimum
Gain: Unity
Frequency Response: 20 Hz to 20 Khz (+/-0.5 dB)
Dimensions: 3.0 x 2.3 x 2.2" (76 x 59 x 55mm)
Weight 5.4 oz (153.1g)
Saramonic SR-HM7 Di Digital Dynamic Handheld Microphone with Lightning Cable for Apple iPhone & iPad & USB Cable for Windows PCs & Apple Mac Computers
$ 199.00
Saramonic SR-HM7 Di Digital Dynamic Handheld Microphone with Lightning Cable for Apple iPhone & iPad & USB Cable for Windows PCs & Apple Mac Computers
MFR SKU: SR-HM7DI | Helix SKU: SRSRHM7DI
Overview
The Saramonic SR-HM7 DI is a handheld digital dynamic microphone that delivers premium, broadcast-quality sound for Podcasting, Live Sound, Recording and more. Included, removeable dedicated output cables for direct connection to iPhone, iPad, and iPod Touch via the Lightning port, and a USB cable for use with Windows PCs and Apple Macintosh computers. A headphone jack enables you to listen to your sound during recording and playback. The microphone was designed to enhance the clarity of the human voice, which makes it an excellent choice for use in podcasting, presentation videos, news gathering, audio for smartphone videos, live streaming, vlogging, music recording and more.
The SR-HM7 DI is incredibly easy to use. You just connect an output cable and start recording. A switch at the base of the microphone allows you to change between Recording to Playback operation modes. An included rubber bottom cap allows you to keep the output connector firmly attached to the base of the microphone preventing the output cables from accidentally being disconnected when recording audio on-the-go. The sleek black exterior of the SR-HM7 DI features an anti-glare finish that looks great on camera and will not reflect on-camera lights, stage lights, or studio lights.
The long, tapered handle of the SR-HM7 DI is comfortable to hold and provides plenty of space for mic flags to advertise your channel or brand. The all-metal design helps to reduce handling noise, and the durable microphone grill diffuses wind noise — which helps you get great sound outdoors. The cardioid pickup pattern reduces unwanted sounds to the sides and rear, and the built-in high-quality preamp and analog-to-digital converter ensure that you get the best possible audio quality. Whether you’re shooting on-the-street interviews with your iPhone for your YouTube channel or a major network, or if you’re recording a podcast at home on your computer or in the field with your Apple device, the SR-HM7 DI will deliver rich and detailed sound every time.
- Professional handheld digital handheld microphone with Lightning Cable for Apple iPhone, iPad, and iPod Touch and USB cable for Windows PCs and Macintosh Computers
- Incredibly easy to use — just connect and start recording, dedicated headphone output for monitoring audio during recording and playback
- Long tapered handle is comfortable to hold and provides ample space for mic flags, all-metal design reduces handling noise, durable grill diffuses wind noise outdoors
- Frequency response optimized for clarity of the human voice, cardioid pickup pattern reduces unwanted sounds to the sides and rear
- Sleek black exterior features an anti-glare finish that will not reflect on-camera lights, stage lights, or studio lights, built-in high-quality preamp and analog-to-digital converter
Specifications:
Frequency Response: 75 Hz - 20 kHz
Output: Micro USB port
Headphone Output: 1/8" (3.5 mm)
Type of Microphone: Unidirectional dynamic capsule
Sampling Rate: 44.1 kHz, 48 kHz, 96 kHz
Sensitivity: 0°-52.4 dB±3 dB(0 dB= 1V/ ubar at 1KHz)
Gain: 35 dB
Signal to Noise Ratio: 80 dBU
Power: USB plug-in power
Compatible Devices: Apple iOS devices, Windows PC computers, Apple Macintosh computers
Indicators: Blue light = recording mode, green light = playback mode, green and blue light = recording and playback at the same time (only iPhone and iPad have this mode)
Dimensions: 2 x 10.2” (51 x 258 mm)
Weight: 10.2 oz (290 g)
Saramonic SR-HM7 UC Digital Dynamic Handheld Microphone with USB-C for Android Smartphones & Tablets & USB for Windows PCs & Apple Mac Computers
$ 199.00 - Sold Out
Saramonic SR-HM7 UC Digital Dynamic Handheld Microphone with USB-C for Android Smartphones & Tablets & USB for Windows PCs & Apple Mac Computers
MFR SKU: SR-HM7UC | Helix SKU: SRSRHM7UC
Overview
The Saramonic SR-HM7 UC is a handheld digital dynamic microphone that delivers premium, broadcast-quality sound and comes with dedicated output cables for direct connection to the USB-C ports found on modern Android devices and computers, and a USB-A cable for use with Windows PCs and Apple Macintosh computers. A built-in headphone jack lets you to listen to your sound during recording and playback. The microphone element was designed to enhance the clarity of the human voice, which makes it an excellent choice for use in podcasting, presentation videos, news gathering, audio for smartphone videos, live streaming, vlogging, music recording and more.
The SR-HM7 UC is incredibly easy to use. You just connect an output cable and start recording. A switch at the base allows you to change between Recording to Playback operation modes. An included rubbery bottom cap allows you to keep the output connector firmly attached to the base of the microphone. This prevents the cables from accidentally being disconnected, which is ideal for recording audio and shooting video on-the-go. The sleek black exterior of the SR-HM7 UC features an anti-glare finish that looks great on camera and will not reflect on-camera lights, stage lights, or studio lights.
The long, tapered handle of the SR-HM7 UC is comfortable to hold and provides plenty of space for mic flags to advertise your channel or brand. The all-metal design helps to reduce handling noise, and the durable microphone grill diffuses wind noise — which helps you get great sound outdoors. The cardioid pickup pattern reduces unwanted sounds to the sides and rear, and the built-in high-quality preamp and analog-to-digital converter ensure that you get the best possible audio quality. Whether you’re shooting on-the-street interviews with your Android phone for your YouTube channel or a major network, or if you’re recording a podcast at home on your computer or in the field with your mobile device, the SR-HM7 UC will deliver rich and detailed sound every time.
- Professional handheld USB microphone that delivers broadcast-quality sound with direct connection to Android mobile devices, Windows PCs and Apple Macintosh computers
- Incredibly easy to use — just connect to your device and start recording, a dedicated headphone jack lets you monitor audio during recording and playback
- Durable all-metal design reduces handling noise, long tapered handle looks professional and provides ample space for mic flags
- Frequency response optimized for clarity of the human voice, cardioid pickup pattern reduces unwanted sounds to the sides and rear, grill diffuses wind noise outdoors
- Sleek black exterior features an anti-glare finish that will not reflect on-camera, stage, or studio lights, built-in high-quality preamp and analog-to-digital converter
Specifications:
Frequency Response: 75 Hz - 20 kHz
Output: Micro USB port
Headphone Output: 1/8" (3.5 mm)
Type of Microphone: Unidirectional dynamic capsule
Sampling Rate: 44.1 kHz, 48 kHz, 96 kHz
Sensitivity: 0°-52.4 dB±3 dB(0 dB= 1V/ ubar at 1KHz)
Gain: 35 dB
Signal to Noise Ratio: 80 dBU
Power: USB
Compatible Devices: Windows PC computers, Apple Macintosh computers, Android devices with USB-C ports, Chromebooks
Indicators: Blue light = recording mode, green light = playback mode, green and blue light = recording and playback at the same time
Dimensions: 2 x 10.2” (51 x 258 mm)
Weight: 10.2 oz (290 g)
Saramonic SR-TM7 15.5" Professional Supercardioid XLR Shotgun Condenser Microphone with Rechargeable Lithium-Ion Battery
$ 339.00 - Sold Out
Saramonic SR-TM7 15.5" Professional Supercardioid XLR Shotgun Condenser Microphone with Rechargeable Lithium-Ion Battery
MFR SKU: SR-TM7 | Helix SKU: SRSRTM7
Overview
The Saramonic SR-TM7 is a professional XLR shotgun microphone that delivers clear, broadcast-quality sound to video cameras, audio recorders, and DSLR and mirrorless cameras that have XLR adapters. Its long-shotgun design enables it to excel at capturing sounds in wide shots and in situations where you cannot get close to the sound source.
The TM7 offers several useful features and has a built-in rechargeable battery for power. There are 5 illuminated buttons that are easy to adjust in low-light. The -10 dB PAD button allows you to cleanly capture loud sounds. The +6 dB high frequency boost button enhances sharpness and clarity. There are two low-cut buttons (75 and 150 Hz) that make dialog more intelligible and eliminate distracting deep bass noises, like the low rumble of vehicles and air conditioners.
The built-in lithium battery can power the TM7 for 150 hours. It can also be powered via phantom and the power button changes color to indicate energy source and battery life. A Micro-USB charging port is unobtrusively integrated into the XLR connector, and a charging cable is included. You also get a short XLR cable, a mic clip with a camera shoe mount, and a foam windscreen in the box.
The TM7 features a durable metal construction that will handily withstand the demanding world of video production. The absence of a disposable battery compartment makes the all-metal TM7 more lightweight, and the built-in battery digitally controls the on-board filters and saves your settings when the microphone is turned off. A high-wind furry windscreen that was designed specifically for the TM7 called the TM-WS7 can be used when shooting outdoors in windy conditions (sold separately).
- Professional broadcast-quality 15.5” shotgun microphone that runs on built-in lithium battery or phantom power
- Supercardioid polar pattern excels at capturing sounds in tight shots with extreme directionally and wide shots and in situations where you cannot get close to the sound source
- Low-cut button makes dialog more intelligible and eliminates distracting rumble noises, +6 dB high frequency boost button enhances sharpness and clarity, -10 dB button allows you to cleanly capture loud sounds
- 150 hours of operation time from the built-in lithium-ion battery, power button changes color to indicate energy source and battery life, Micro-USB charging port in the XLR connector
- Illuminated buttons are easy to adjust in low-light working environments
Specifications:
Frequency Response: 20 Hz to 20 kHz
Acoustic Principle: Line gradient
Polar Pattern: Supercardioid
Sensitivity: -30±3dB (0dB=1V/Pa,at 1KHz) 1.5V 2.2kΩ
Output Impedance: 200 ohm
Max Output: 10 dBu (at 1 kHz, 1% THD into 1 kOhm)
Dynamic Range: 120 dB
Max SPL: 145 dB
Signal to Noise Ratio: 80 dB SPL
Filters: High-pass 75 and 150 Hz
Battery: 48V Phantom or internal lithium-ion battery (150 hours)
Output Connector: 3-pin XLR (Balanced)
Dimensions: 15.55 x .9 x .9" (39.5 x 2.3 x 2.3cm)
Weight: 7.7 oz (219g)
Saramonic SR-WM4C Wireless 4-Channel Lavalier Microphone System
$ 99.95
Saramonic SR-WM4C Wireless 4-Channel Lavalier Microphone System
The Saramonic SR-WM4C is a compact and lightweight VHF wireless microphone system - the perfect audio solution for recording simply and easily, free from the limit of distance.
The SR-WM4C is ideal for filmmaking, conducting broadcast interviews and business presentations - or any other need that requires portability and great sound quality.
The slim, low-profile clip-on omni-directional microphone transmits its signal via a bodypack transmitter to the receiving unit. Both the Saramonic receiver and transmitter are lightweight and easy to use - offering ultimate flexibility without sacrificing high-quality audio.
This set includes the Saramonic SR-WM4C receiver, Saramonic SR-WM4C bodypack transmitter and omni-directional clip-on microphone.
Saramonic TX-XLR9 Plug-on XLR Transmitter for UwMIC9 Digital UHF Wireless Microphone System
$ 149.00
Saramonic TX-XLR9 Plug-on XLR Transmitter for UwMIC9 Digital UHF Wireless Microphone System
MFR SKU: UWMIC9TXXLR9 | Helix SKU: SRUWMIC9TXXLR9
Overview
The Saramonic TX-XLR9 is a wireless UHF plug-on transmitter that makes any kind of XLR microphone wireless and provides stellar, broadcast-quality sound. You can easily attach a handheld interview microphone (such as the Saramonic SR-HM7), or any other kind of XLR microphone and use it wirelessly. The TX-XLR9 can also provide +48V phantom power, allowing you to use any kind of condenser microphone wirelessly, such as the Saramonic SR-TM1 shotgun microphone. It’s ideal for use with DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. It features sturdy metal construction and delivers excellent sound quality at an affordable price. The TX-XLR9 is ultra-compact, lightweight, and easy to bring with you on every shoot.
The TX-XLR9 is designed to be used with the Saramonic UwMic9 RX9 dual-channel wireless camera-mountable receiver (sold separately). The RX9 enables you to have two on-camera subjects with their own wireless microphones by adding either a TX9 beltpack transmitter and clip-on lavalier microphone, an HU9 Handheld Microphone, or an additional TX-XLR9 transmitter and a handheld XLR microphone.
The TX-XLR9 is built tough with sturdy metal construction, features a locking XLR connector to hold the attached microphone firmly in place, and it syncs with the RX9 receiver wirelessly through easy-to-use infrared sensors. The easy-to-read backlit LCD display lets you make quick adjustments to the intuitive menus in the brightest or darkest environments. The TX-XLR9 can be muted with the press of a button, and a flashing red LED reminds you that it’s muted. The buttons can be “locked” when in use to prevent accidental muting or powering off.
The TX-XLR9 transmitter also features a selectable RF power output. The “Low” setting lets you extend battery life in situations where the subject is close to the receiver. Medium and High are useful when the subject is going to be further away, or when you’re using the TX-XLR9 in an environment with more potential interference. The TX-XLR9 is a high-quality piece of equipment with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Broadcast-quality UHF wireless plug-on transmitter for the dual-channel RX9 receiver (sold separately)
- Makes any microphone wireless and provides +48v phantom power to condenser microphones
- Works right out of the box with easy plug-and-play operation
- Durable metal construction with Easy-to-read backlit LCD display, easy-to-use menus and controls and locking XLR connector that keeps the connected microphone firmly attached
- Offers up to 330-foot (100m) operating distance with infrared that makes it easy to sync channels with receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking XLR Connector
Phantom Power: Selectable +48V Phantom Power (On/Off)
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 4.15 x 1.69 x 1.37” (105.5 x 43 x 34.7mm)
Weight: 4.87 oz (138g) (without batteries)
In The Box:
1 x TX-XLR9 plug-on transmitter
1 x SR-UMBC1 battery compartment
1 x Printed user manual
1 x Warranty card
Optional Accessories (Sold Separately):
- SR-HM7 Cardioid Dynamic Handheld Interview Microphone
- SR-TM1 Cardioid 11” Cardioid Shotgun Microphone
- SR-TM7 Super-Cardioid 15” Cardioid Shotgun Microphone
- SR-NV5 Cardioid 6.5” Shotgun Microphone
- XLavMic-O Omnidirectional Lavalier with XLR Connector
- XLavMic-C Cardioid Lavalier with XLR Connector
- SR-UMBC1 Replacement Battery Compartment
- SR-RX9 UwMic9 Dual-Channel Camera-Mountable Receiver
SARAMONIC UWMIC15 16-CHANNEL UHF WIRELESS LAVALIER MICROPHONE SYSTEM WITH PORTABLE CAMERA-MOUNTABLE WIRELESS RECEIVER
$ 149.00 - Sold Out
SARAMONIC UWMIC15 16-CHANNEL UHF WIRELESS LAVALIER MICROPHONE SYSTEM WITH PORTABLE CAMERA-MOUNTABLE WIRELESS RECEIVER
MFR SKU: UWMIC15 | Helix SKU: SRUWMIC15
Overview
The Saramonic UwMic15 is a portable, camera-mountable wireless microphone system that utilizes the UHF (Ultra High Frequency) spectrum and provides stellar, broadcast-quality sound in a package that’s substantially more affordable than other UHF wireless systems. The included RX15 receiver and TX15 beltpack transmitter are both compact and lightweight, and the SR-M1 clip-on lavalier microphone sounds excellent and is visually discreet when clipped to collars and clothing. The UwMic15 system is perfect for DSLRs, mirrorless cameras, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube and more.
It works right out of the box and is remarkably easy to use. You just connect the microphone, turn on the power and go. The RX15 receiver features a headphone output, enabling real-time audio monitoring if your camera lacks a headphone jack. The UHF spectrum helps you avoid interference, and the 555-579 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. There are 16 channels available, which allows you to run multiple sets of UwMic15 systems at the same time. If you ever have an issue with interference and need to change channels, built-in infrared makes synchronizing easy.
The power button on the TX15 beltpack transmitter can easily be set to “locked” to prevent it from accidentally being turned off when in use. If the person wearing the microphone needs privacy, a quick push of a button turns on a muting feature, and a flashing red LED reminds you to unmute it afterward. The system offers an impressive operating range of up to 330-feet (100m).
This kit includes both 1/8“ (3.5mm) and XLR output cables so you can use the UwMic15 with DSLRs, mirrorless cameras, cinema cameras, camcorders, professional video cameras, audio recorders, mixers and more. The UwMic15 system is also expandable. Optional transmitters and output cables (sold separately) are available, giving you unrivaled flexibility. They make it possible to use a wireless handheld microphone with the SR-HM15 or a wireless XLR plug-on transmitter with the SR-XLR15, and to connect the included RX15 receiver to smartphones, tablets, computers, GoPro cameras and more.
- Broadcast-quality UHF wireless lavalier microphone system with camera-mountable portable receiver, UHF frequency spectrum helps you avoid interference
- Headphone monitor output enables you to always listen to your sound, even if your camera lacks a headphone jack
- Easy-to-use with plug-and-play operation, easy-to-read backlit LCD displays on both units, included microphone and output cables feature locking connectors to prevent unplugging
- Wireless infrared synchronization makes it easy to sync channels between the RX15 receiver and TX15 transmitter, 16 selectable channels for running multiple systems
- Up to 330-ft (100m) operating distance, mute button function with red flashing LED to remind you it’s muted
Specifications:
Channels: 16
Oscillator Type: PLL synthesizer
Output: 1/8“ (3.5mm) mini jack
Antenna: 1/4 λ wire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Frequency Range: 555 - 579 MHz
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Power: 2 x AA batteries
Dimensions: 7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.58oz (73g) without batteries
TX15 Transmitter Specifications:
Channels:16
Oscillator Type: PLL synthesizer
Carrier Frequencies:555 - 579 MHz
Reference Deviation: +/- 5 kHz
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4 λ wire antenna
Audio Input Connector: 1/8“ (3.5mm) mini jack
Reference Audio Input Level: -60 dBV
Distortion: 0.5% or less
Power: 2 x AA batteries
Dimensions:7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.4oz (68g) without batteries0
In The Box:
1 x RX15 portable UHF receiver
1 x TX15 UHF transmitter
1 x SR-M1 omnidirectional lavalier microphone
1 x alligator-style lavalier mic clip
1 x camera shoe mount with an integrated 1/4 20 tripod thread
1 x short coiled locking mini-plug output cable with gold-plated connectors
1 x short locking gold-plated mini-plug to XLR male output cable
2 x removable belt clips
2 x SR-UMBC1 battery compartments
1 x printed manual
1 x warranty card
Optional Accessories (Sold Separately):
- SR-XLR15 Plug-on UHF transmitter with +48V phantom power for XLR microphones
- SR-HM15 Wireless UHF handheld vocal microphone
- LC-C35 Output Cable: Locking 1/8” (3.5mm) to Lightning cable for iPhone & iPad
- UTC-C35 Output Cable: Locking 1/8” (3.5mm) to USB Type-C cable for smartphone or tablets
- SR-PMC1 Output Cable: Locking 1/8” (3.5mm) to TRRS cable for Smartphone or Tablets
- USB-CP30 Output Cable: Locking 1/8” (3.5mm) to USB cable PC or Mac computers
- SR-GMC1 Output Cable: Locking 1/8” (3.5mm) to select GoPro cameras
- LM-WS Fur Windjammer for SR-M1 Lavalier 3-Pack
- SR-LMWS3 Replacement Foam Windscreens 3-Pack
- WM4C-MC1 Replacement Mic Clip
- SR-XM1 Swiveling Omnidirectional Condenser Microphone
- SR-UMBC1 Replacement Battery Compartment
- SR-UM10-MC2 Replacement Belt Clip
- SR-UM10-MC1 Replacement Shoe-Mount Adapter
- SR-UM10-C35XLR Replacement Locking type 1/8” (3.5mm) to XLR Male Output Cable
- SR-UM10-C35 Replacement Locking type 1/8” (3.5mm) to 1/8” (3.5mm) Output Cable
- SR-UM10-M1 Replacement SR-M1 Lavalier
- SR-UC-201 3.5mm Female TRS Microphone Adapter Cable to 3.5mm Male TRRS for smartphone or tablets
- SR-25C35 3.5mm to 2.5mm Microphone Output Cable for SSE with Fuji Cameras
- SR-TX15 Replacement UHF beltpack transmitter
SARAMONIC UWMIC9 HU9 WIRELESS UHF HANDHELD CARDIOID MICROPHONE TRANSMITTER FOR UWMIC9 RX9 RECEIVER
$ 149.00 - Sold Out
SARAMONIC UWMIC9 HU9 WIRELESS UHF HANDHELD CARDIOID MICROPHONE TRANSMITTER FOR UWMIC9 RX9 RECEIVER
MFR SKU: UWMIC9-HU9 | Helix SKU: SRUWMIC9HU9
Overview
The Saramonic HU9 is a handheld microphone with a built-in UHF wireless transmitter and integrated antenna that provides rich, broadcast-quality sound in a durable yet sleek metal body. It’s perfect for use with DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. The HU9 features sturdy metal construction and delivers excellent sound quality at an affordable price. It’s compact, lightweight, and easy to bring with you on every shoot.
The HU9 is designed to be used with the Saramonic UwMic9 RX9 dual-channel wireless camera-mountable receiver (sold separately). The RX9 enables you to have two on-camera subjects with their own wireless microphones by adding either a TX9 beltpack transmitter and clip-on lavalier microphone, a TX-XLR9 plug-on transmitter and a handheld XLR microphone, or a second HU9 handheld microphone.
The exterior of the HU9 has only one button which makes operating it extremely easy. The combo mute/power button can be locked with a switch hidden inside the body to prevent the person holding the mic from accidentally muting, changing the channel or turning it off. An easy-to-read backlit LCD display clearly shows the remaining battery life, mute status, and the group and its operating channel. A protective ring around the perimeter of the grill prevents the HU9 from rolling when resting on flat surfaces.
The HU9 transmitter also features a selectable RF power output. The “Low” setting lets you extend battery life in situations where the subject is close to the receiver. Medium and High are useful when the subject is going to be further away, or when you’re using the HU9 in an environment with more potential interference. The HU9 is a high-quality piece of equipment with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Broadcast-quality UHF wireless handheld microphone transmitter for the dual-channel RX9 receiver (sold separately)
- Cardioid pickup pattern rejects unwanted sounds from the sides and rear
- Rugged all-metal construction that has a has a professional, sleek look with easy-to-read backlit LCD display, easy-to-use menus and a single-button control
- Switchable Low or High RF power output for increased battery life or range
- Offers up to 330-foot (100m) operating distance with infrared that makes it easy to sync channels with receiver
Specifications:
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Polar Pattern: Cardioid
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 10 x 2.05 x 2.05” (254 x 52 x 52 mm)
Weight: 11.93oz (338.2g) (without batteries)
In The Box:
1 x HU9 handheld microphone
1 x Printed user manual
1 x Warranty card
Optional Accessories (Sold Separately):
- SR-HM7-WS2 Foam Windscreen for SR-HM7 (2-pack)
- SR-RX9 UwMic9 Dual-Channel Camera-Mountable Receiver
Saramonic Uwmic9 Rx-XLR9 Compact Plug-On Dual-Channel Uhf Wireless Receiver
$ 199.99 - Sold Out
Saramonic Uwmic9 Rx-XLR9 Compact Plug-On Dual-Channel Uhf Wireless Receiver
MFR SKU: UWMIC9RX-XLR9 | Helix SKU: SRUWMIC9RXXLR9
Overview
The Saramonic UwMic9 RX-XLR9 is an ultra-portable, ultra-compact dual-channel UHF wireless microphone receiver that can mount directly to an XLR input of a professional video camera, mixer or an audio recorder. With the included accessories it can also easily be mounted to the shoe of a DSLR, Mirrorless or Video Camera and plugged into a 1/8“ (3.5mm) mic input. Its dual-channel ability allows you to use wireless microphones on two separate people with only a single RX-XLR9 (transmitters sold separately). Very easy to use, the RX-XLR9 features durable metal construction, and provides pristine, broadcast-quality sound for interviews, film dialog, field recording, TV and news gathering.
Unlike other Plug-In wireless receivers that require expensive proprietary batteries, the RX-XLR9 runs on 2 standard AA’s, and can be powered with an external USB battery pack (sold separately). A headphone output is built-in, so you can always monitor your sound, even when your camera lacks a headphone jack. An easy-to-read backlit LCD display lets you make quick adjustments to its intuitive menus in the brightest or darkest environments. The RX-XLR9 can be rotated 320° to make room for other equipment when mounted to a camera. The UwMic9 RX-XLR9 is ideal for use with professional video cameras, DSLRs, mirrorless cameras, mixers and portable audio recorders.
The RX-XLR9 utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range in 96 selectable channels is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap.
A variety of excellent wireless transmitters are available to use with your RX-XLR9, and because it works with two of them at the same time, you can mix and match to suit your needs. Choose from the TX9 beltpack transmitter (which includes an SR-M1 omnidirectional lavalier microphone), the TX-XLR9 Plug-In transmitter, and the HU9 handheld wireless microphone.
- Two channel wireless UHF receiver built into a single, ultra-compact and ultra-portable body that works with two transmitters at the same time and provides pristine, broadcast-quality sound
- Mounts directly to an XLR input on professional video cameras, mixers or recorders and provides reliable broadcast-quality sound, features durable metal construction
- Includes hardware to mount to DSLR, Mirrorless and Video Cameras and plug into 1/8“ (3.5mm) mic inputs, rotates 320° to make room for other equipment
- Built-in headphone output so you monitor your sound, even when your camera lacks a headphone jack, easy-to-read backlit LCD display
- Offers up to 330-ft (100m) operating distance, not impacted by the FCC’s ban of the 600 MHz frequencies
Specifications:
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Receiver Output Connector: 3-Pin XLR Male
Output Cable: 1/8” (3.5mm) TRS Output Cable
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Receiver Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Reference Audio Input Level: -60dBV (MIC Input, 0dB Attenuation)
Batteries: 2 LR6/AA size batteries
Dimensions: 4.4 x 2.48 x 1.02” (112 x 63 x 26mm)
Weight: 3.39 oz (96g) (without batteries)
HU9 Transmitter
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Polar Pattern: Cardioid
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 10 x 2.05 x 2.05” (254 x 52 x 52 mm)
Weight: 11.93 oz (338.2g) (without batteries)
In The Box:
1 x Plug-on dual-channel wireless receiver
1 x Camera shoe mount with an integrated metal 1/4 20 tripod thread
1 x 13-inch (33cm) XLR female to gold-plated 1/8“ (3.5) TRS male cable
1 x 4-ft (1.2m) gold-plated USB-C to USB-A cable
1 x Printed user manual
1 x Warranty card
Optional Accessories (Sold Separately):
- TX9 Belt-pack Transmitter with Lavalier
- TX-XLR9 Transmitter: XLR Plug-on Transmitter with +48V phantom power
- HU9 Transmitter: Wireless Handheld Microphone
- SR-UC-201 3.5mm Female TRS Microphone Adapter Cable to 3.5mm Male TRRS for smartphone or tablets
- SR-25C35 3.5mm to 2.5mm Microphone Output Cable for SSE with Fuji Cameras
Saramonic UwMic9 RX9+TX9 UHF Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
$ 269.00 - Sold Out
Saramonic UwMic9 RX9+TX9 UHF Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
MFR SKU: UWMIC9TX9RX9 | Helix SKU: SRUWMIC9TX9RX9
Overview
The Saramonic UwMic9 RX9+TX9 is a portable, camera-mountable UHF lavalier wireless system that provides stellar, broadcast-quality sound and offers powerful features that greatly exceed the capabilities of wireless systems that cost over twice as much. The included dual-channel RX9 receiver gives you the ability to run two separate wireless microphones by adding an additional transmitter (sold separately). This system is perfect for DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. Both components feature sturdy metal construction and deliver excellent sound quality in a low-cost package. This kit is ultra-compact, lightweight, and easy to bring with you on every shoot.
The UwMic9 is remarkably easy to use. It works right out of the box. You just plug in the mic, turn on the power and go. It utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you if needed and the infrared synchronization makes the process a snap. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. The RX9 receiver also includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone output.
The compact, dual-channel RX9 receiver features two separate wireless receivers. This gives you the ability to run two separate wireless microphones anytime, by just adding an additional optional transmitter. Locking 1/8” (3.5mm) mini-plug and XLR output cables are both included so you can use the UwMic9 with DSLRs, mirrorless cameras, cinema cameras, camcorders, professional video cameras, audio recorders and more. This flexible system can also be used to transmit line-level audio, such as an output from a mixer. This can be useful at weddings and other events where you need to wirelessly record crystal-clear audio from a soundboard.
Another great benefit is that your UwMic9 system is expandable. Optional transmitters and output cables (sold separately) are available, giving you unrivaled flexibility. Easily add an additional beltpack transmitter and lavalier microphone, or two wireless handheld microphones, or use wireless plug-on transmitters. You can also connect the included RX9 receiver to smartphones, tablets, computers, GoPro cameras and more with optional output cables. The UwMic9 RX9+TX9 is a high-quality system with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Broadcast-quality UHF wireless lavalier microphone system with a dual-channel camera-mountable portable receiver you can easily expand by adding a second transmitter
- Easy-to-use and works right out of the box with plug-and-play operation
- Built-in headphone output so you can always hear your sound — even when your camera lacks a headphone jack
- Durable all-metal construction with easy-to-read backlit LCD displays
- Offers up to 330-foot (100m) operating distance with auto-scan feature finds the best channels for you and infrared makes it easy to sync channels
Specifications:
RX9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Output: Locking 1/8” (3.5mm) TRS mini-jack
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.72 oz (218.7g) (without batteries)
TX9 Transmitter
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic UwMic9 RX9+TX9+TX9 2-Person Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
$ 399.00
Saramonic UwMic9 RX9+TX9+TX9 2-Person Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
MFR SKU: UWMIC9TX9TX9RX9 | Helix SKU: SRUWMIC9TX9TX9RX9
Overview
The Saramonic UwMic9 RX9+TX9+TX9 is a portable, dual-channel, camera-mountable UHF wireless system that provides stellar, broadcast-quality sound and enables you to use clip-on lavalier mics on two separate people while only requiring you to attach a single ultra-compact receiver to your camera. This system is perfect for DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. Every component features sturdy metal construction and delivers excellent sound quality in a low-cost package. The entire kit is ultra-compact, lightweight, and easy to bring with you on every shoot.
The UwMic9 is remarkably easy to use. It works right out of the box. You just plug in the mics, turn on the power and go. It utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap. There are 96 channels available, which enables you to run multiple sets of UwMic9 systems at the same time without issues. Easy-to-read backlit LCD displays on both of the transmitters and the receiver let you make quick adjustments to the intuitive menus in the brightest or darkest environments. The RX9 receiver also includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone output.
Locking 1/8” (3.5mm) mini-plug and XLR output cables are both included so you can use the UwMic9 with DSLRs, mirrorless cameras, cinema cameras, camcorders, professional video cameras, audio recorders and more. This flexible system can also be used to transmit line-level audio, such as an output from a mixer. This can be useful at weddings and other events where you need to wirelessly record crystal-clear audio from a soundboard in addition to running a wireless mic.
The power button on the TX9 beltpack transmitter can easily be set to “locked” to prevent it from accidentally being turned off when in use. If the person wearing the clip-on lavalier microphone needs privacy, a quick push of a button turns on a muting feature, and a flashing red LED reminds you to unmute it afterward. The system offers an impressive operating range of up to 330-feet (100m).
Another great benefit is that the UwMic9 system is expandable. Optional transmitters and output cables (sold separately) are available, giving you unrivaled flexibility. They make it possible to add a wireless handheld microphone or a wireless plug-on transmitter, and to connect the included RX9 receiver to smartphones, tablets, computers, GoPro cameras and more. The UwMic9 RX9+TX9+TX9 is a high-quality system with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Complete two-person UHF wireless lavalier microphone kit with a single, dual-channel camera-mountable receiver that provides reliable broadcast-quality sound
- Easy-to-use and works right out of the box with plug-and-play operation
- Built-in headphone output so you can always hear your sound — even when your camera lacks a headphone jack
- Durable all-metal construction with easy-to-read backlit LCD displays
- Offers up to 330-foot (100m) operating distance with auto-scan feature finds the best channels for you and infrared makes it easy to sync channels
Specifications:
RX9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Output: Locking 1/8” (3.5mm) TRS mini-jack
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.72 oz (218.7g) (without batteries)
TX9 Transmitters
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic UwMic9 TX9+RX-XLR9 UHF Wireless Lavalier Mic System with Dual-Channel XLR Plug-In Receiver for Professional Video, DSLR & Mirrorless Cameras
$ 329.00 - Sold Out
Saramonic UwMic9 TX9+RX-XLR9 UHF Wireless Lavalier Mic System with Dual-Channel XLR Plug-In Receiver for Professional Video, DSLR & Mirrorless Cameras
MFR SKU: UWMIC9TX9RXXLR9 | Helix SKU: SRUWMIC9TX9RXXLR9
Overview
The Saramonic UwMic9 TX9+RX-XLR9 is an ultra-portable, dual-channel, camera-mountable wireless UHF lavalier system that has powerful features which greatly exceed the capabilities of wireless systems that cost over twice as much. It allows you to use wireless microphones on two separate people (when you add an additional transmitter, which is sold separately). If you ever need more than one wireless microphone in the future, you can easily and affordably expand this system. This system is easy to use, features durable metal construction, and provides pristine, broadcast-quality sound for interviews, film dialog, field recording, TV and news gathering.
The included RX-XLR9 dual-channel receiver can mount directly to an XLR input of a professional video camera, mixer or an audio recorder, and it can also easily be mounted to a DSLR, Mirrorless or Video Camera and plugged into a 1/8“ (3.5mm) mic input with the included accessories. Unlike other Plug-In wireless receivers that require expensive proprietary batteries, the RX-XLR9 runs on 2 standard AA’s, and can be powered with an external USB battery pack (sold separately). It can also be rotated 320° to make room for other equipment when mounted to a camera. The included TX9 beltpack transmitter and SR-M1 omnidirectional lavalier microphone are also premium quality components.
The UwMic9 utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. Plus, the RX-XLR9 receiver includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone output.
A variety of excellent wireless transmitters are available to expand your system, and because it works with two of them at the same time, you can mix and match to suit your needs. Choose from an additional TX9 beltpack transmitter (which includes an SR-M1 lavalier microphone), the TX-XLR9 Plug-In transmitter, and the HU9 handheld wireless microphone.
- All metal constructed wireless beltpack lavalier transmitter with an ultra-compact dual-channel plug-on camera receiver, both components feature durable metal construction
- Easy to use and provides reliable, pristine broadcast-quality sound, can easily be expanded by adding another separately sold wireless transmitter
- Receiver mounts directly to an XLR input and includes a shoe-mount with 1/8“ (3.5mm) output cable for DSLR, Mirrorless and Video Cameras, rotates 320° to make room for other equipment
- Built-in headphone output so you monitor your sound, even when your camera lacks a headphone jack, easy-to-read backlit LCD display
- Offers up to 330-ft (100m) operating distance, not impacted by the FCC’s ban of the 600 MHz frequencies
Specifications:
RX-XLR9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Receiver Output Connector: 3-Pin XLR Male
Output Cable: 1/8” (3.5mm) TRS Output Cable
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Receiver Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Reference Audio Input Level: -60dBV (MIC Input, 0dB Attenuation)
Batteries: 2 LR6/AA size batteries
Dimensions: 4.4 x 2.48 x 1.02” (112 x 63 x 26mm)
Weight: 3.39 oz (96g) (without batteries)
TX9 Transmitter
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic UwMic9 TX9+TX9+RX-XLR9 Dual-Channel UHF Wireless Lavalier Mic System with Plug-In XLR Receiver for Professional Video, DSLR & Mirrorless Cameras
$ 459.00 - Sold Out
Saramonic UwMic9 TX9+TX9+RX-XLR9 Dual-Channel UHF Wireless Lavalier Mic System with Plug-In XLR Receiver for Professional Video, DSLR & Mirrorless Cameras
MFR SKU: UWMIC9TX92RXLR9 | Helix SKU: SRUWMIC9TX92RXLR9
Overview
The Saramonic UwMic9 TX9+TX9+RX-XLR9 is an ultra-portable, dual-channel, camera-mountable UHF wireless system that enables you to use clip-on lavalier mics on two separate people while only requiring you to attach a single ultra-compact receiver to your camera. The included RX-XLR9 receiver can mount directly to an XLR input of a professional video camera, mixer or an audio recorder, and it can also easily be mounted to a DSLR, Mirrorless or Video Camera and plugged into a 1/8” (3.5mm) mic input with the included accessories. This system is easy to use, features durable metal construction, and provides pristine, broadcast-quality sound for interviews, film dialog, field recording, TV and news gathering.
The UwMic9 utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range in 96 selectable channels is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. Plus, the RX-XLR9 receiver includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone jack.
Unlike other Plug-In wireless receivers that require expensive proprietary batteries, the RX-XLR9 runs on 2 standard AA’s, and can be powered with an external USB battery pack (sold separately). It can be rotated 320° to make room for other equipment when mounted to a camera. The UwMic9 TX9+TX9+RX-XLR9 is ideal for use with professional video cameras, DSLRs, mirrorless cameras, mixers and portable audio recorders.
- 2 wireless UHF beltpack lavalier transmitters with an ultra-compact dual-channel plug-on camera receiver, all components feature durable metal construction
- Easy to use and provides reliable, pristine broadcast-quality sound, put clip-on lav mics on two people with only a single ultra-portable receiver to your camera
- Receiver mounts directly to an XLR input and includes a shoe-mount with 1/8“ (3.5mm) output cable for DSLR, Mirrorless and Video Cameras, rotates 320° to make room for other equipment
- Built-in headphone output so you can monitor your sound, even when your camera lacks a headphone jack, easy-to-read backlit LCD display
- Offers up to 330-ft (100m) operating distance, not impacted by the FCC’s ban of the 600 MHz frequencies
Specifications:
RX-XLR9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Receiver Output Connector: 3-Pin XLR Male
Output Cable: 1/8” (3.5mm) TRS Output Cable
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Receiver Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Reference Audio Input Level: -60dBV (MIC Input, 0dB Attenuation)
Batteries: 2 LR6/AA size batteries
Dimensions: 4.4 x 2.48 x 1.02” (112 x 63 x 26mm)
Weight: 3.39 oz (96g) (without batteries)
TX9 Transmitters
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic Vmic Mini Shotgun Microphone
$ 59.00
Saramonic Vmic Mini Shotgun Microphone
MFR SKU: VMICMINI| Helix SKU: SRVMICMINI
Overview
The Saramonic Vmic Mini is an extremely compact and lightweight mini-shotgun microphone that mounts directly to DSLR, mirrorless, and video cameras and enables you to easily capture broadcast-quality sound. It can also be connected to smartphones and tablets with an included cable and dramatically improves the sound quality of your mobile productions.
The all metal construction and precision cut body of this microphone is a work of art. The size makes it ideal for use with small format DSLR, Mirrorless and video cameras as well as smaller mobile devices. Its ultra-compact size allows the mic to be placed in areas that larger shogun mics just won’t fit.
Using the Vmic Mini is incredibly simple. You just plug it in and you’re done. There are no batteries to install or charge, and there are no buttons or switches to operate. It’s truly plug-and-play. A great choice for anyone creating video content on a budget but looking for high-quality gear. Vmic Mini is a lightweight and ultraportable shotgun microphone that will give all of your videos excellent sound.
A stand out feature of the Vmic Mini design is the unique microphone shockmount. The wiry shockmounts on some competing microphones are flimsy and prone to bending, this can cause some unwanted audio issues and change the way the microphone picks up sound. The integrated shockmount of Vmic Mini is robust and features a sleek, sweeping and stable design.
An advanced uniquely designed bullet like windscreen is included, giving the Vmic Mini its unique and interesting look. It features a sturdy gasket which aids in blocking wind noise, helps to protect the microphone from things like weather and dust, and keeps it securely fastened in place while on the go.
Every aspect of the Vmic Mini’s design is top notch, and the built-in locking camera shoe features a metal 1/4 20 tripod thread at the base that gives you near limitless mounting options. Two output cables are included: one that connects to cameras, and another that connects to the headphone jack of smartphones and tablets. Whether you’re shooting with a powerful DSLR, mirrorless, video cam, tablet or a smartphone, the Vmic Mini is a compact and ultraportable shotgun microphone that will give all of your videos excellent sound.
- Provides clear, broadcast-quality sound to DSLR, Mirrorless and Video Cameras or Smartphones and Tablets
- Easy-to-use with plug-and-play operation and no batteries required for operation
- Sleek camera-mountable design that is lightweight and compact, yet features durable metal construction
- Includes two output cables: one for cameras, one for mobile devices
- Mounts to camera shoes, camera cages, boom poles, tripods, stands and more
Specifications:
Type: 14mm Condenser Microphone
Polar Pattern: Cardioid (Uni-Directional)
Frequency Range: 75Hz - 20kHz
Sensitivity: -35 ±3dB (0dB = 1V/Pa, @ 1kHz)
Maximum Input SPL: f=1kHz, THD<5% (105dB)
Output Impedance: 200ohm
Signal to Noise Ratio: 75dB SPL
Weight: 2.43oz (69g)
Dimensions: 4.61 x 0.75 x 2.44” (117 x 19 x 62mm)
In The Box:
1 x Mini shotgun microphone with integrated shockmount
1 x Fitted foam windscreen
1 x Short coiled 1/8“ (3.5 mm) TRS to 1/8“ (3.5 mm) TRS output cable with gold-plated right-angle connectors
1 x Short coiled 1/8“ (3.5 mm) TRS to 1/8“ (3.5 mm) TRRS output cable with gold-plated connector for mobile devices
1 x Information card
1 x Warranty card
Optional Accessories:
- SR-BSP1 Aluminum Smartphone Holder with Stabilizing Handle & Mounting Shoe
- LC-C35 Output Cable: Locking 1/8” (3.5mm) to Lightning cable for iPhone & iPad
- UTC-C35 Output Cable: Locking 1/8” (3.5mm) to USB Type-C cable for Smartphone or Tablets
- USB-CP30 Output Cable: Locking 1/8” (3.5mm) to USB cable PC or Mac computers
- SR-GMC2 Output Cable: 1/8” (3.5mm) to select GoPro cameras
- SR-CS350 Replacement 1/8” (3.5mm) Male Stereo TRS to 1/8” (3.5mm) Male Stereo TRS Output Cable
- SR-PMC2 Replacement Output Cable: 1/8” (3.5mm) to TTRS cable for Smartphone or Tablets
Saramonic VMIC Recorder Super-Cardioid Video Microphone with Built-in Audio Recorder
$ 159.00 - Sold Out
Saramonic VMIC Recorder Super-Cardioid Video Microphone with Built-in Audio Recorder
MFR SKU: VMIC-REC | Helix SKU: SRVMICREC
Overview
The Saramonic Vmic Recorder is a premium on-camera shotgun microphone with a built-in high-resolution audio recorder that delivers broadcast-quality sound to DSLRs, mirrorless cameras and video cameras and provides many useful features. Specifically designed for DSLR, Mirrorless and Video Cameras that lack a microphone input or users that want to record to an external recorder as well as their camera. There are two outputs on the Vmic Recorder, one for your camera and another for headphones — so you can always listen to your audio while recording or even when your camera lacks a headphone jack. The built-in audio recorder captures rich and detailed sound with resolutions up to 24bit 48kHz, and like all Saramonic products, the Vmic Recorder is incredibly easy to use.
A backlit LCD screen with an intuitive menu system is provided on the rear of the Vmic Recorder, and a push-button joystick lets you quickly do a range of functions like controlling the headphone volume, adjusting the recording level, and turning on the low-cut filter, which makes dialog more intelligible and eliminates distracting rumble sounds. The exterior of the Vmic Recorder is constructed with durable metal and was built to survive the not-so-gentle world of video production. The robust integrated shockmount features a camera shoe mount and a metal 1/4 20 tripod thread for more mounting options.
In addition to impressive sound quality, the Vmic Recorder also efficiently utilizes power. It gets 9 hours of operation time when recording, and 10 hours when used as a shotgun mic and it runs on 2 standard AA batteries. Audio is recorded onto a MicroSDHC card (sold separately), and it’s compatible with up to 32GB capacities. Plus, the Vmic Recorder can be used as an excellent-sounding on-camera shotgun microphone even when you’re not recording. A foam windscreen is included for indoor use, and for outdoor recording in higher winds you can use the fitted VMIC-WS furry windscreen (sold separately).
- Broadcast-quality on-camera shotgun microphone with an integrated high-resolution MicroSDHC audio recorder, built-in headphone jack and removable output cable
- Durable metal construction, robust integrated shockmount with camera shoe mount
- Incredibly easy to use, low-cut filter makes dialog more intelligible and eliminates distracting rumble sounds
- Backlit LCD screen with easy-to-use menu system, camera shoe features a metal 1/4 20 tripod thread, records up to 24-bit 48kHz resolution
- Can be used as an on-camera shotgun microphone even when you’re not recording, runs on 2 standard AA batteries and gets up to 10 hours of operation
Specifications:
Frequency Response:50 Hz to 20 kHz
Type of Microphone: Condenser (Unidirectional)
Polar Pattern: Supercardioid
Maximum SPL: 104 dB
Signal to Noise Ratio: 22 dB, Gain Setting 66 dB
Operating Temperature Range: -17 to 57 Celsius
Output Impedance: 47 Ohms or less
Headphone Output Impedance: 16 Ohms
Sensitivity: -40 dB at 1 kHz
Filter: High-pass 200 Hz
Recording Media: MicroSDHC card slot
Resolution: 16-bit/48kHz wav or 24-bit/48kHz wav
Outputs: 2 x female 1.8” (3.5 mm), 1 for headphones, 1 for camera connection
Battery: 2 x AA (Alkaline or Lithium)
Dimensions: 10.04 x 2.6 x 3.15” (255 x 66 x 80 mm)
Weight: 7.3 oz (207 g)
In The Box:
1 x Vmic Recorder shotgun microphone with built-in audio recorder
1 x short, coiled cable with gold-plated mini-plug connectors
1 x foam windscreen
1 x printed manual
1 x warranty card
Optional Accessories (Sold Separately):
- VMIC-WS Outdoor high-wind furry windscreen
- SR-UC-201 1/8“ (3.5mm) Female TRS microphone adapter cable to 3.5mm male TRRS for smartphones and tablets with a headphone jack
- WM4C-C35 Replacement 1/8“ (3.5mm) male stereo TRS to 3.5mm male stereo TRS output connector cable
- SR-CS350 2-Pack of replacement 1/8“ (3.5mm) male stereo TRS to 3.5mm male stereo TRS output connector cables
- SR-SM-C301 1/8“ (3.5mm) output cable for iOS
- SR-SM-C302 1/8“ (3.5mm) output cable for Android
- LC-C35 Locking 1/8“ (3.5mm) to Lightning output cable for iPhone & iPad
- UTC-C35 Locking 1/8“ (3.5mm) to USB Type-C output cable for smartphones, tablets and Apple computers with USB Type-C
- SR-PMC2 1/8“ (3.5mm) TRS to 1/8“ (3.5mm) TRRS output cable for smartphones and tablets
- SR-GMC2 1/8“ (3.5mm) TRS to select GoPro camera output cable
- USB-C201 Locking 1/8“ (3.5mm) TRS to USB output cable for PC and Mac computers
