Canon EOS RP Full-Frame Mirrorless Camera Body Only

Type

Recording Media

• SD card speed class-compatible.
• UHS-I and II supported.
• Use of UHS-II microSDHC/SDXC cards with a microSD to SD adapter is not recommended. When using UHS-II supported cards, use SDHC/SDXC cards compatible with UHS-II.
• Eye-Fi cards not supported.
• Multimedia cards (MMC) cannot be used.

Image Format

Compatible Lenses

Lens Mount

Type

Pixels

Pixel Unit

Total Pixels

Aspect Ratio

Color Filter System

Low Pass Filter

Dust Deletion Feature

1. Self Cleaning Sensor Unit
   
   • Removes dust adhering to the low-pass filter.
   • At power off only / Enable / Disable. Performed automatically (taking about 3.3 sec. as indicated on the screen) or manually (taking about 12.2 sec. as indicated on the screen).
   • After manually activated cleaning, the camera will automatically restart (Power OFF to ON).
   • When [Multi Shot Noise Reduction], [Multiple exposures], or [HDR mode] is set, [Clean now] and [Clean manually] cannot be selected.

1. Dust Delete Data acquisition and appending
   
   • The coordinates of the dust adhering to the low-pass filter are detected by a test shot and appended to subsequent images.
   • The dust coordinate data appended to the image is used by the provided software to automatically erase the dust spots.
   • Not available with EF-S lenses, in cropped shooting or when distortion correction is applied.

1. Manual cleaning (by hand)

File Size

• Values for Recording Pixels are rounded to the nearest 100,000 or 10,000.
• For RAW and JPEG images, information outside the cropping area is not retained.
• JPEG images are generated in the set aspect ratio.
• RAW images are generated in [3:2], and the set aspect ratio is appended.

File Numbering

1. File numbering methods
1. Continuous numbering
1. The numbering of captured images continues even after you replace the card.
2. Auto reset
1. When you replace the card, the numbering will be reset to start from 0001. If the new SD card already contains images, the numbering will continue from the last recorded image in the card.

1. Manual reset
   1. Resets the file number to 0001, and creates a new folder automatically.

RAW + JPEG Simultaneous Recording

Color Space

Picture Style

1. Auto
2. Standard
3. Portrait
4. Landscape
5. Fine Detail
6. Neutral
7. Faithful
8. Monochrome
9. User Defined 1–3

• In Scene Intelligent Auto, [Auto] will be set automatically.
• [Standard] is the default setting for [User Def. 1–3].

Settings

1. Auto (Ambience priority/White priority)
2. Daylight
3. Shade
4. Cloudy*
5. Tungsten light
6. White fluorescent light
7. Flash
8. Custom (Custom WB)
9. Color temperature

Auto White Balance

Color Temperature Compensation

Type

Coverage

Magnification

Eye Point

Viewfinder Information

1. Movie recording time
2. Maximum burst
3. Possible shots/Sec. until self-timer shoots
4. Focus Bracketing/ Multiple-exposure/HDR shooting/Multi Shot Noise Reduction/Bulb time/Interval timer
5. Touch Shutter
6. AF method
7. AF operation
8.  Drive mode
9. Metering mode
10. Anti-flicker shooting
11. Shooting mode/Scene icon
12. AE lock
13. Flash-ready/FE lock/High-speed sync
14. Shutter speed/Multi-function lock warning
15. Aperture
16. AF point (1-point AF
17. Exposure level indicator
18. Exposure compensation
19. Highlight tone priority
20. ISO speed
21. Create folder
22. Movie recording size
23. No. of shots left for focus bracketing/multiple exposures/interval timer
24. Temperature warning
25. Battery level
26. Exposure simulation
27. AEB/FEB
28. Magnify button
29. Still photo cropping
30. Aspect ratio
31. Auto Lighting Optimizer
32. Picture Style
33. White balance/White balance correction
34. Quick Control button
35. Image Quality
36. Bluetooth®/Wi-Fi® function
37. Wi-Fi® signal strength
38. Histogram
39. Electronic level
40. GPS acquisition status
41. Flash exposure compensation
42. Focus distance display

Type

AF Points

AF Working Range

Focusing Modes

AF Point Selection

AF Assist Beam

1. Enable
2. Disable
3. LED AF assist beam only
   • Focus range with the AF-assist beam is generally no more than 13.1 ft. / 4m (at f/5.6).
   • Options restricted to [Enable] / [Disable in Basic Zone modes.
   • [AF- assist beam firing] is set to [Disable] in Landscape, Panning, Kids, and Sports modes.

Metering Modes

1. Evaluative metering (AF point-linked)
2. Partial metering (approx. 5.5% of the area at the center of the screen)
3. Spot metering (approx. 2.7% of the area at the center of the screen)
   • AF point-linked spot metering not provided.
4. Center-weighted average metering

Metering Range

Exposure Control Systems

1. Scene Intelligent Auto
2. Flexible-priority AE (Fv)
3. Program AE (P)
4. Shutter-priority AE (Safety shift possible) (Tv)
5. Aperture-priority AE (Safety shift possible) (Av)
6. Manual exposure (M)
7. Bulb
8. Custom shooting mode C1, C2, C3

ISO Speed Range

Manual Setting

• For [Highlight tone priority], the minimum ISO speed limit will be ISO 200 to 40000.
• ISO speed safety shift possible with Custom Function.
• All the expanded ISO speeds including those for movies are only “equivalent speeds.”

Auto

*¹ Depending on [Minimum] and [Maximum] of [ISO speed settings] or [Range for stills].
*² If outside the range set for ISO Auto, the value nearest ISO 400 is used. 

Exposure Compensation

AE Lock

1. Auto AE lock
   • The metering mode for AE lock after focus can be customized.

1. Manual AE lock
   • In the Fv, P, Tv, Av and M modes, enabled with the AE lock button. (Press again to update.)
   • Enabled in all metering modes.

Type

1. Electronic first curtain, mechanical second curtain
2. Electronic shutter (slit rolling read out)

Shutter Speeds

Shutter Release

Self Timer

Shutter Lag Time

Flash Metering System

Flash Exposure Compensation

FE Lock

External Flash Settings

1. External flash control
   • Flash firing, E-TTL II Flash metering, Slow synchro, Safety FE, Flash mode, Wireless function, Flash zoom, Shutter synchronization and Flash exposure compensation

1. Flash Custom Function setting
   • The setting options for both (1) and (2) will differ depending on the Speedlite used.

Drive Modes

1. Single shooting
2. High-speed continuous shooting
   • Max. approx. 5.0 fps
     • The conditions are attaining the maximum continuous shooting speed are as follows:
     • Shooting with a fully charged battery in One-Shot AF mode at a 1/500 sec. or faster shutter speed and maximum aperture (depending on the lens), at room temperature (73°F/23°C), without flicker reduction, or image stabilization (depending on the lens).
     • The continuous shooting speed for high-speed continuous shooting may be lower, depending on conditions such as these: battery level, temperature, flicker reduction, shutter speed, aperture, subject conditions, brightness, AF operation, type of lens, use of flash and shooting settings.
     • With Servo AF: Max. approx. 4.0 fps (shooting speed priority)
     • When set to reduce flicker: Max. approx. 4.0 fps
     • In flash photography: Max. approx. 2.3 fps

1. Low-speed continuous shooting (Tracking priority)
   • Max. approx. 2.6 fps

1. Self-timer: 10 sec./remote control
2. Self-timer: 2 sec./remote control
3. Self-timer: Continuous Shooting

Maximum Burst

• The number of possible shots and maximum burst (standard) apply to a 32GB card based on Canon's testing standards. The maximum burst (High-speed) apply to a 32GB card based on Canon's testing standards.
• The file size, number of possible shots and maximum burst vary depending on shooting conditions (aspect ratio of 3:2, subject, memory card brand, ISO speed, Picture Style, etc.)
• “Full” indicates that shooting is possible until the card becomes full.

Shooting Modes

Focusing

• Dual Pixel CMOS AF
• Contrast AF (When recording 4K movies)
• Manual focus
  • Magnified view possible by approx. 5x or 10x for manual focusing (not possible during movie shooting).
  • With Contrast AF as used when recording 4K movies, focusing may take longer than when recording Full HD or HD movies, and focusing with certain lenses may be difficult.

Metering Modes

• Center-weighted average metering
  • Metering brightness range: EV -1 – 20 (at 73°F/23°C, ISO 100) (Video)

• AF point-linked evaluative metering
  • For face detection with Face detection + Tracking AF.

Metering Range

Grid Display

1. 3x3
2. 6x4
3. 3x3+diag

File Format

Video Recording Size and Frame Rates

• Full HD not available with EF-S lenses or with movie cropping.
• Outputted in 4K (UHD) resolution through image processing.

Continuous Shooting Time

• Bit rate indicates video output only; audio is not included.
• Video recording is interrupted if the maximum recording time per movie, 29 min. 59 sec., is exceeded.
• When movie crop shooting is set to [Disable] or movie digital IS is set to [Disable].
• There is no restriction to automatically stop movie shooting even when the file size reaches 4GB.
• Sound is not recorded for approx. the last two frames when the compression method for movie recording quality is IPB or IPB Light (audio: AAC) and [C .Fn III-9: Audio compression] is set to [Enable]).
• When you play back movies on Windows, movie images and sound may become slightly out of synchronization.

Focusing

1. Dual Pixel CMOS AF
2. Contrast AF (When recording 4K movies)
3. Manual focus
   • Magnified view possible by approx. 5x or 10x for manual focusing (not possible during movie shooting).
   • With Contrast AF as used when recording 4K movies, focusing may take longer than when recording Full HD or HD movies, and focusing with certain lenses may be difficult.

Range

Exposure Control

Exposure Compensation

Type

Monitor Size

Pixels

Coverage

Brightness Control

Coating

• Anti-smudge coating provided.
• Anti-reflection coating not provided.

Interface Languages

Display Format

1. Single image display
   • No information display
   • Basic information display
   • Detailed shooting information display
   • Detailed information
   • Lens/Histogram information
   • White balance information
   • Picture Style information 1
   • Picture Style information 2
   • Color space/Noise reduction information
   • Lens aberration correction information 1
   • Lens aberration correction information 2
   • Record of sent images
   • GPS information
   
   Display selection is available for Basic information display and Shooting information display.

1. Index display
   • 4-image index
   • 9-image index
   • 36-image index
   • 100-image index

Highlight Alert

Protection

1. Single image (select image)
2. Select range
3. All images in folder
4. All images on card
   • Image browsing and image search can be based on ratings.
   • Ratings-based image selections also possible with DPP.

1. All found images (only during image search)

Erase

1. Select images to erase
2. Select range
3. All images in folder
4. All images on card
5. All found images (only during image search)

Compatible Printers

DPOF

Custom Controls

Customizable Buttons

Customizable Dials

My Menu Registration

• Up to six top-tier menu items and Custom Functions can be registered.
• Up to five My Menu tabs can be added.

USB Terminal

• For PC communication
• Shared with terminal for in-camera charging with the USB Power Adapter PD-E1.
• In-camera charging: although it is compatible with USB Type-C (5V/1.5A) equivalent, do not charge the camera other than with the USB Power Adapter PD-E1.

Video Out Terminal

• Images can be displayed through the HDMI output and on screen at the same time.
• Images will not be displayed unless [NTSC] or [PAL] is properly set according to the video system of the TV set.

Extension System Terminal

Battery

Battery Check

• Battery level displayed on the LCD panel and in the viewfinder.
• Remaining capacity (3 level battery capacity indicator)
• Recharge performance

Power Saving

• At least approx. 6 min. until auto power off while the [Date/Time/Zone] screen is displayed.

Date/Time Battery

Start-up Time

• Based on CIPA testing standards.

Dimensions (W x H x D)

Weight

Working Temperature Range