RODE NTG1 Condenser Shotgun Microphone
$ 249.00
RODE NTG1 Condenser Shotgun Microphone
Rode SKU: NTG1 | Helix SKU: RMNTG1
Overview
Directional super cardioid condenser shotgun microphone with switchable HPF
- Broadcast sound quality
- Low noise circuitry
- Super-cardioid polar pattern
- Condenser transducer
- Rugged metal construction
- Two step High Pass Filter (Flat/80Hz)
- Low handling noise
- Low weight - 105g (3 oz.)
- Includes mic clip, wind shield and zip case
- Ideal for professional applications within the film, video, television and production industries
- 10 year extended warranty when you register your microphone
The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
The RØDE NTG1 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance convertor with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 50Ω |
| Maximum SPL | 139dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 6.9mV |
| Sensitivity | -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dB-A |
| Power Options |
+24V phantom power required from mixer or interface
|
| Weight | 105.00gm |
| Dimensions | 219.00mmH x 22.00mmW x 22.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 10 years following registration |
RODE NTG3 Precision RF-Biased Shotgun Microphone - Silver
$ 699.00 - Épuisé
RODE NTG3 Precision RF-Biased Shotgun Microphone - Silver
Rode SKU: NTG3 | Helix SKU: RMNTG3
Overview
Precision broadcast-grade super cardioid shotgun mic. Withstands adverse environmental conditions. RCNTG3 storage cylinder
- Superior broadcast sound quality
- High Sensitivity
- Super-cardioid polar pattern
- Designed to withstand adverse environmental conditions
- 50% less self-noise than the majority of shotgun microphones
- Extremely low handling noise
- High level of immunity to radio frequency interference
- True Condenser (external RF biased)
- Includes durable aluminium storage cylinder for transport, pop filter, mic clip and large zip pouch
- Designed for professional use on film, television, ENG & wherever high resolution broadcast audio is required
- 10 year extended warranty when you register your microphone
The RØDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required.
As RØDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich, warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue.
Machined from solid brass and available in either anti-glare, nickel-plated finish or matte black (NTG3B), the NTG3 is incredibly robust while remaining light weight.
Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time.
A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone's rugged performance credentials.
The RØDE NTG3 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | RF Bias |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 25Ω |
| Maximum SPL | 130dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 8.2mV |
| Sensitivity | -30.0dB re 1 Volt/Pascal (31.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 13dB-A |
| Power Options | |
| Weight | 163.00gm |
| Dimensions | 255.00mmH x 19.00mmW x 19.00mmD |
| Output |
3-pin XLR Output
|
| Warranty | 1 year with free extension to 10 years following registration |
Rode VideoMic Directional Video Condenser Microphone w/Mount
$ 149.00 - Épuisé
The RODE VideoMic Direction Video Condenser Microphone is a professional-grade shotgun microphone. Based on the latest Film industry technology, the VideoMic is designed specifically for use with high quality digital video cameras. The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it's ABS construction. The VideoMic is powered by a standard 9 V battery and offers a low battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble. The VideoMic attaches to any camcorder that has the standard camera-shoe fitting and utilizes a stereo mini jack for audio output. RODE VideoMic Shotgun Microphone Features Broadcast and studio sound quality Rugged reinforced ABS construction two step high-pass filter - flat or 80 Hz integrated shock mount 9 V battery operation condenser transducer low noise circuitry low handling noise includes windscreen integrated camera-shoe mount
