CapBuckle Lens Cap Holder 62mm-49mm-40.5mm
$ 9.95 - Épuisé
CapBuckle Lens Cap Holder 62mm-49mm-40.5mm
CapBuckle SKU: CB200DE | Helix SKU: EXCB200DE
Overview
Always forgetting where you put down your lens cap? Get a Cap Buckle and keep your cap on your strap.
Cap Buckle’s clever design attaches to a camera or bag strap and holds your lens cap securely just like your lens cap attaches to your lens.
Cap Buckle comes in 5 sizes, each capable of holding one-of-three lens cap sizes:
82-77-72
67-58-52
55-52-43
62-49-40.5
37-40.5-43-46
Note sizes marked on each side of the Cap Buckle before attaching to strap and face appropriate side out.
UPC: 728028152784
ExpoDisc 2.0 Professional White Balance Cap - 82mm
$ 49.95
ExpoDisc 2.0 Professional White Balance Cap - 82mm - EXEXPOD282
FlatHat 16" (40cm) Collapsible Drone Pad - Red Gold
$ 19.95
FlatHat 16" (40cm) Collapsible Drone Pad - Red Gold
FlatHat SKU: FHDPGR16 | Helix SKU: EXFHDPGR16
Overview
Improve landing skills: learn to land safely and accurately
Helps protect drone sensors and camera from rotor wash debris
Provides easy-to-see landing target and “return-home” location
Makes small drones on the ground easier to see
Integrated loops to attach FlatHat Lighting Kit (sold separately)
Made with durable, heavy-duty fabric
Size: 16” diameter expanded (collapses to 6" for storage)
Weight: 3.5 oz (100g)
Package Contents
(1) 16" FlatHat Collapsible Drone Pad
(1) fabric carry bag
FlatHat Lighting Kit for Collapsible Drone Pads - Gamma Green
$ 19.95
FlatHat Lighting Kit for Collapsible Drone Pads - Gamma Green
FlatHat SKU: FHLKG | Helix SKU: EXFHLKG
Overview
Light up your FlatHat Drone Pad for low-light flying with FlatHat Lighting Kits, available in Ice Blue or Gamma Green colors.
The lighting kit incorporates a flexible, plastic coated electroluminescent wire that attaches to the perimeter of the 32” or 16" FlatHat Collapsible Drone Pad, allowing for better visibility in low-light flying conditions.
The wire length is sized to fit the perimeter of the 32" drone pad. To attach the lighting kit to the smaller circumference of the 16" drone pad simply shorten (cut) the wire with a sharp pair of scissors.
The included 4-way light controller allows you to set the lighting effect to constant, pulse, strobe, or off. It is powered by 2 AA batteries (not included).
Note, the drone pad can be collapsed and stored in the carry bag with the lighting kit attached.
Lighting Kit Features:
Attaches to perimeter of FlatHat 32" and 16" Collapsible Drone Pads
Electroluminescent wire is flexible
Cool to the touch
Water resistant
Package Contents
(1) FlatHat Lighting Kit with 7'10" (2.40m) electroluminescent wire and 4-way light controller
Note, FlatHat Lighting Kit controller requires 2 AA batteries (not included).
FlatHat Lighting Kit for Collapsible Drone Pads - Ice Blue
$ 19.95
FlatHat Lighting Kit for Collapsible Drone Pads - Ice Blue
FlatHat SKU: FHLKB | Helix SKU: EXFHLKB
Overview
Light up your FlatHat Drone Pad for low-light flying with FlatHat Lighting Kits, available in Ice Blue or Gamma Green colors.
The lighting kit incorporates a flexible, plastic coated electroluminescent wire that attaches to the perimeter of the 32” or 16" FlatHat Collapsible Drone Pad, allowing for better visibility in low-light flying conditions.
The wire length is sized to fit the perimeter of the 32" drone pad. To attach the lighting kit to the smaller circumference of the 16" drone pad simply shorten (cut) the wire with a sharp pair of scissors.
The included 4-way light controller allows you to set the lighting effect to constant, pulse, strobe, or off. It is powered by 2 AA batteries (not included).
Note, the drone pad can be collapsed and stored in the carry bag with the lighting kit attached.
Lighting Kit Features:Attaches to perimeter of FlatHat 32" and 16" Collapsible Drone Pads
Electroluminescent wire is flexible
Cool to the touch
Water resistant
Package Contents
(1) FlatHat Lighting Kit with 7'10" (2.40m) electroluminescent wire and 4-way light controller
Note, FlatHat Lighting Kit controller requires 2 AA batteries (not included).
Rogue 3-in-1 Flash Grid with 3 Gel Starter Set
$ 39.95 - Épuisé
Rogue 3-in-1 Flash Grid with 3 Gel Starter Set
Rogue SKU: ROGUEGRID2 | Helix SKU: EXROGUEGRID2
Overview
The Rogue 3-in-1 Flash Grid uses 2 interchangeable and stackable honeycomb grid inserts to create a 45º, 25º, or a tight 16º grid spot for dramatic lighting effects.
The Rogue Flash Grid includes the new attachment strap and a starter set of 3 colorful effects gels (Dark Salmon, Steel Green and Oklahoma Yellow).
Honeycomb grids produce a spot of light with gradual fall-off. They can be used as main lights, as hair lights in portraiture, or for background and accent lights to create mood and drama.
The 3-in-1 Rogue Flash Grid is designed to fit most standard sized flash models from Canon, Nikon, Sony, Nissin, Phottix, ProMaster and Yongnuo.
New Rogue Grid Attachment Design: The Rogue Grid uses an improved belt and buckle design to provide a faster and more secure attachment to your flash. The integrated attachment strap is adjustable to fit all popular brands of accessory flashes with a circumference measuring from 8" to 9 3/4".
Features:
- Produces 16, 25 and 45 degree grid spots
- Attaches quickly & securely
- Fits all popular brands of accessory flashes
- Size: 3.6" x 1.2" (92mm x 30mm)
- Weight: 3.9 oz (110g)
Contents:
Grid Bezel
25˚ Honeycomb Grid insert
45˚ Honeycomb Grid insert
Grid Snoot (with integrated attachment strap)
3-Gel Starter Set (Dark Salmon, Oklahoma Yellow, Steel Green)
Soft Fabric Carry Pouch
Rogue Diffusion Panel - Small
$ 19.95
Rogue Diffusion Panel - Small
Rogue SKU: ROGUEDFPSM | Helix SKU: EXROGUEDFPSM
Overview
The Small Diffusion Panel converts the FlashBender Small Reflector (sold separately) into a lightweight, low profile soft box for use with on-camera accessory flash.
The Small Diffusion Panel attaches quickly to the FlashBender Small Reflector using hook-and-loop sewn along the edges of each panel.
Attaching the Small Diffusion Panel to the FlashBender 2 Small Reflector will reduce your exposure by approximately 1 f/stop compared to the FlashBender 2 Small Reflector without the Diffusion Panel.
Features:
- Attaches Quickly to FlashBender SMALL Reflector (sold separately)
- Transforms FlashBender SMALL Reflector into a soft box
- Packs Flat / Great for Travel
- Size: 9" x 4.5" (229mm x 114mm)
- Weight: 1.5 oz (45g)
Contents:
1x Diffusion Panel SMALL
