Benro Adventure AL Series 2 3-Section Aluminum Tripod with Flip Locks TAD27A
$ 134.95
Benro Adventure AL Series 2 3-Section Aluminum Tripod with Flip Locks TAD27A
Benro SKU: TAD27A | Helix SKU: IDTAD27A
Overview
This classic design tripod, the Adventure TAD27A, offers advanced features and controls for exploring every style of photography. The Adventure tripod combines aluminum legs with lightweight magnesium castings and quick flip leg locks for ease of use.
Specifications
| MAXIMUM LOAD | 26.5 lb (12 kg) |
| MAX HEIGHT (24° LEG ANGLE) W/COLUMN EXTENDED | 63.8 in (162 cm) |
| MAX HEIGHT (24° LEG ANGLE) W/COLUMN RETRACTED | 53.15 in (135 cm) |
| MINIMUM HEIGHT | 15.16 in (38.5 cm) |
| MAXIMUM HEIGHT | 63.8 in (162 cm) |
| FOLDED LENGTH | 24.2 in (61.5 cm) |
| NUMBER OF LEG SECTIONS | 3 |
| LEG LOCK TYPE | Flip Lock |
| WEIGHT | 3.95 lb (1.79 kg) |
| LEG DIAMETER 1 | 28.6 mm |
| LEG DIAMETER 2 | 25.2 mm |
| LEG DIAMETER 3 | 21.8 mm |
Item Includes
Benro Mach3 AL Series 2 Aluminum Tripod
$ 174.95 - Épuisé
Benro Mach3 AL Series 2 Aluminum Tripod
Benro SKU: TMA28A | Helix SKU: IDTMA28A
Overview
Support up to 30.9 lb worth of gear with the TMA28A Series 2 Mach3 Aluminum Tripod from Benro. Made from aluminum, the 4-section legs are secured via twist locks and extend to a maximum height of 61.2". The center column can be replaced with the included short column to allow the tripod to reach a minimum height of 12.4". One of the legs unscrews from the tripod, attaches to the center column, and with the addition of an optional head converts to a monopod. The rubber feet can be swapped out for metal spikes so that the tripod can be used on hard surfaces, such as ice, or soft surfaces, like carpeting or a lawn. A ballast hook on the center column allows for the addition of stabilizing weight, and the included carrying case protects the tripod during transport. A 3/8"-16 threaded stud on the mounting platform lets you attach a head of your choice.
Benro TSL08CN00 Slim Carbon-Fiber Tripod with Ball Head
$ 154.95
Benro TSL08CN00 Slim Carbon-Fiber Tripod with Ball Head
This TSL08CN00 Slim Tripod from Benro is constructed from carbon fiber to minimize weight, supports up to 8.8 lb, and includes an Arca-type ball head with quick release plate. Designed to conserve space during storage and transport, the tripod measures 20.1" long and 3.2" wide when folded. Its 4-section legs each feature an independent spread, a 3-position angle lock, half-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 15.7" to a maximum height of 48.4" or 57.6" with its push-and-pull, rapid center column fully raised.
Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included quick release plate. The quick release plate can be attached or removed from the integrated, Arca-type clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. While the top of the quick release plate features a rubberized, non-slip platform, dual retaining screws are provided along its underside. Those retaining screws help prevent the quick release plate and an attached camera from accidentally sliding off when the clamp it is placed on is opened.
By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Additionally, the primary locking knob controls the ability to pan the head 360°. For added versatility, the tripod's center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them.
