Avenger D350 French Flag Holder for Articulated Arm
$ 22.95
This French Flag Holder is designed to fit D300 or D301 articulated arms, D310 Mini Flex Arm or Maxi Flex Arm D315. Attachment: 6mm attachment; material: zinc steel; weight: 0.04 lbs.
F&V 1/4"-20 Male Thread to Baby Pin 102070160101
$ 14.00 - Sold Out
F&V 1/4"-20 Male Thread to Baby Pin 102070160101
The F&V Lighting 1/4"-20 Male Thread to Baby Pin attaches a baby pin to your accessories that have a 1/4"-20 female thread. The baby pin allows you to use your accessories on a greater variety of light stands and light holders.
Flex Arm for Super Clamp
$ 19.95 - Sold Out
This Flex Arm is 21.6" in length and has a brass 5/8" Stud with a 3/8" female thread on one end and a 5/8" brass stud with 1/4" male thread on the opposite end. The arm can be used to hold up gobos, small LED lights, flashes, or other camera/video accessories in any position you want. Features: Brass Ends with aluminum Neck; 21.65" in Length; 0.66lbs Load Capacity; 5/8" Stud with 1/4" Male Screw; 5/8" Hex Stud with 3/8" Female Thread.
Highlights
› Brass Ends with Aluminium Neck
› 21.65" in Length
› 0.66lbs Load Capacity
› 5/8" Stud with 1/4" Screw
› 5/8" Hex Stud with 3/8" Female Socket
Package Contents
(1x) Flex Arm for Super Clamp
Outside Dimensions N/A
Inside Dimensions N/A
Product Weight (lb) 0.88 lb (0.4 kg)
Material Brass Ends w/ Aluminum & Steel Arm
Manufacturer Studio Assets
Gaffer Clamp
$ 39.95 - Sold Out
Gaffer Clamp
This Gaffer Clamp's mouth can be adjusted to fit onto poles and flat objects up to 2.5" thick. The mouth has six rubber pads to prevent damaging the surfaces you mount the clamp. The clamp features a permanent baby pin at the end and a 5/8" socket at the other end.
Highlights No
Package Contents
(1x) Gaffer Clamp
Outside Dimensions No
Inside Dimensions No
Product Weight (lb) 1 lb (0.5 kg)
Material Aluminum Alloy
Manufacturer Studio Assets
Kupo 1/4 Inches-20 Threaded Mounting Plate with Baby 5/8 Feet Feet (16mm) Stud KG002412
$ 20.19
This round flat plate allows you to mount your camera, field recorder or any other accessory tapped with a female 1/4"-20 thread to a Convi Clamp or any piece of grip equipment that has a baby receiver.
Kupo 100mm Caster with Brake, 25.4mm Square Adapter, Set of Three, KS940712
$ 110.95 - Sold Out
Casters take your light stands mobile! They especially come in handy when you are doing work in the studio. Casters will protect your floors, keep things quiet on set and of course, make repositioning your lighting fixtures that much easier. The KS940712 is a set of three 3-15/16 (100mm) casters designed to fit 1 (25.4mm) square legs. This set of casters has brakes that prevent the wheels from rolling and keeps your stand locked in place.
Kupo 100mm Caster with Brake, 30mm Square Adapter, Set of Three, KS940612
$ 110.95
Casters take your light stands mobile! They especially come in handy when you are doing work in the studio. Casters will protect your floors, keep things quiet on set and of course, make repositioning your lighting fixtures that much easier. The KS940612 is a set of three 3-15/16 (100mm) casters designed to fit 1-3/16 (30mm) square legs. This set of casters has brakes that prevent the wheels from rolling and keeps your stand locked in place.
Kupo 105cm long PVC Coated Safety Wire -5.0mm Diameter, KG061112
$ 10.69
Safety cables are recommended when supporting lights, cameras or accessories from the ceiling in case they unexpectedly come loose from where they are mounted. The KG061112 is a heavy-duty stainless steel safety cable. It is 41.3 (105cm) long, and has a diameter of 0.19 (5mm) with a load rating of 110lbs (50Kg). The KG061112 comes equipped with a locking D ring closure.
Kupo 3 Way Clamp, for 1.0-1.4-Inch (25 to 35mm) Tube, KG900412
$ 44.95 - Sold Out
The 3 Way Clamp is another ingenious Kupo innovation. This all metal cast aluminum clamp features a unique spring locking mechanism that allows you to instantly latch and release the locking collar around any tubing sized from 1.0 -1.4 (25 -35mm) in diameter. Just a quick turn of the tension handle to secure it in place and your ready to mount any light fixture or accessory up to 66 lbs (30 Kg) to light stands, scaffolds or Kupoles in a snap! The 3 Way Clamp has three recessed mounting locations distributed in 90 degree increments in to accept a series of interchangeable accessories.
Kupo 3-Axis Camera Mounting Plate Kit
$ 253.95 - Sold Out
Kupo 3-Axis Camera Mounting Plate Kit
Mfr SKU: KG604312 | Helix SKU: KUKG604312
Overview
The 3-Axis Camera Mounting Plate Kit is designed for mounting a camera on a pipe or truss 48-51mm in diameter. Features three couplers – two couplers with a 5.5in (14cm) long 2in pipe, and the other coupler with a camera mounting plate which allows for greater flexibility in positioning the camera. Perfect for mounting on a pipe boom rig or truss for overhead filming. Constructed from lightweight and solid aluminum alloy.
Features
- Designed for mounting a camera on a pipe or truss 48-51mm in diameter.
- Perfect for mounting on a pipe boom rig or truss for overhead filming
- Features three couplers - two couplers with a 5.5in (14cm) long 2in wide pipe, and the other coupler with a camera mounting plate. This allows for greater flexibility in positioning the camera
- Camera plate features six standard 3/8in holes, spaced every 1in, making it compatible for mounting to most industry-standard cheese plates
- Constructed from lightweight and solid aluminum alloy
Specifications
- Color: Silver
- Material - Primary: Aluminum
- Product Height: 2.36in / 6.0cm
- Product Length: 9.84in / 25.0cm
- Product Width: 5.51in / 14.0cm
- Product Weight: 1.76lb / 0.8kg
- Maximum Jaw Diameter: 2.01in / 51.0mm
- Minimum Jaw Diameter: 1.89in / 48.0mm
- Stand Adapter Type: Camera Plate with 3/8in female
Kupo 3/8 Feet Feet-16 Threaded Mounting Plate with Baby 5/8 Feet Feet (16mm) Stud KG002312
$ 20.19
This round flat plate allows you to mount your tripod head or any other accessory tapped with a female 3/8"-16 thread to a Convi Clamp or any piece of grip equipment that has a baby receiver.
Kupo 3/8-Inch-16 F to 1/4-Inch-20 M Adapter, KG003912
$ 5.39
The KG003912 is a small adapter that converts a 3/8-16 male thread to a 1/4-20 male thread. The KG003912 is made from brass.
Kupo 4 Way Clamp, for 1.4-2.0-Inch (35 to 50mm) Tube, KG900712
$ 54.95 - Sold Out
The 4 Way Clamp is another ingenious Kupo innovation. This all metal cast aluminum clamp features a unique spring locking mechanism that allows you to instantly latch and release the locking collar around any tubing sized from 1.4 -2.0 (35 -50mm) in diameter. Just a quick turn of the tension handle to secure it in place and your ready to mount any light fixture or accessory up to 66 lbs (30 Kg) to light stands, scaffolds or Kupoles in a snap! The 4 Way Clamp has four recessed mounting locations distributed in 90 degree increments to accept a series of interchangeable accessories.
Kupo 4-1/2-Inch Grip Head with 1-1/8-Inch Stud and Receiver, KG400512
$ 69.95
The 4-1/2 Grip Head, KG400512 consists of a pair of rotating aluminum discs attached to a junior 1-1/8 (28mm) stud and receiver. The discs have two different sized V shaped jaws to accept any accessory with a 5/8 or 3/8 mounting stud or tubing. The V shaped jaws have teeth that grab whatever is mounted between the plates securely. The KG400512 uses a non-slip aluminum friction disc that will maintain its durability over time that offers the user positive locking strength and precise control. The cine industry also refers to it as a lollipop. When you need to crank down on a large overhead frame to hold it in place, this is the grip head for the job. The KG400512 is designed to convert a junior stand with a combo head into an overhead stand.
Kupo 4-Inch (10cm) Super Viser Clamp with Hex Receiver - End Jaw, KG601512 (NLA)
$ 50.00
The Super Viser is an extremely strong and versatile clamp. It can mount securely onto round and square objects, or just about any unique shape up to 4 (11cm) in diameter. The jaw position remains fixed on one side of the clamp, enabling it to be mounted where limited space is available. The specially formulated grip pad provides a strong grip, yet protects the surface it's clamped around. Another Kupo innovation outfits this clamp with a hexagonal receiver that accepts the full compliment of Convi Clamp accessories. The Super Viser boasts an impressive load capacity of 66.1 lbs (30 Kg) and comes in a silver aluminum finish.
Kupo 6 Inches (15cm) Chain Clamp with Dual Baby, 5/8 Inches (16mm) Studs KG600412
$ 69.95
This clamp consists of a locking pair of pliers with a 6" length of chain that can be wrapped around odd shaped objects such as a tree branch.
Kupo 75cm long PVC Coated Safety Wire - 3.5mm Diameter, KG060912
$ 10.69
Safety cables are recommended when supporting lights, cameras or accessories from the ceiling in case they unexpectedly come loose from where they are mounted. The KG060912 is a lightweight stainless steel cable coated with PVC. It is 29.52 (75cm) long, and has a diameter of 0.13 (3.5mm) with a load rating of 22lbs (10Kg). The KG060912 comes equipped with a carabiner closure.
Kupo Articulated Arm with Baby 5/8 Inches (16mm) Stud with 3/8 Inches-16F KG300512
$ 72.95
his Convi Clamp accessory is multi-segment five-section arm with four double ball joints, each with a locking knob for precise manipulation of each of the joints. The two end segments are shorter than the three center segments. One end has a baby 5/8" (16mm) stud tapped with a 3/8"-16 thread and the other has a hex stud for mounting in a Convi Clamp.
Kupo Baby 5/8 Inches (16mm) Offset Arm KG006512
$ 32.95
This 15" (38 cm) arm consists of a baby receiver on one side and two opposing baby studs on the other. It is used to position a light fixture or accessory away from the light stand. Perfect for hiding your light stand behind a background or set wall.
Kupo Baby 5/8 Inches (16mm) Snap-In Pin KG000112
$ 8.49
This Convi Clamp accessory has a hex stud on one side and baby stud the other for mounting light fixtures or any other piece of grip equipment or accessory with a baby receiver. These babies are generally bought by the handful and considered a "must have" item in your grip bag.
Kupo Baby 5/8-Inch (16mm) Receiver for 3 & 4 Way Clamp, KG005912
$ 15.49
This baby 5/8 (16mm) receiver quickly attaches to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG900712) to accept any light fixture or accessory with a baby (5/8 - 16mm) stud. All accessories for the 3 4 Way Clamp System have a proprietary notch that slides into one of the mounting locations and then is secured by turning the locking collar.
Kupo Baby 5/8-Inch (16mm) Side Arm KG809712
$ 69.95
This arm consists of a heavy-duty clamp on one side and opposing double baby (5/8" - 16mm) pins on the other. It can be mounted quickly to the riser section of a light stand at any height to accept a light fixture or any accessory with a baby receiver.
Kupo Baby 5/8-Inch (16mm) Stud, 108mm long for 3 & 4 Way Clamp, KG005512
$ 14.95
This baby 5/8 (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG900712) to accept any light fixture or accessory with a baby (5/8 - 16mm) receiver. All accessories for the 3 4 Way Clamp System have a proprietary notch that slides into one of the mounting locations and then is secured by turning the locking collar. The KG005512 is 4.25 (108mm) long.
Kupo Baby 5/8-Inch (16mm) Stud, 66mm long for 3 & 4 Way Clamp, KG005712
$ 13.95
This baby 5/8 (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG900712) to accept any light fixture or accessory with a baby (5/8 - 16mm) receiver. All accessories for the 3 4 Way Clamp System have a proprietary notch that slides into one of the mounting locations and then is secured by turning the locking collar. The KG005712 is 2.6 (66mm) long.
Kupo Baby Drop Ceiling Mount, Baby 5/8-Inch (16mm) Receiver, KD302012
$ 26.95
This adapter is a favorite for trying to find a suitable mounting point on drop ceilings. The drop ceiling mount, also commonly called a scissor mount, attaches to an intersection in the metal grid that supports the tiles. It remains a must have accessory for shooting in office buildings. The KD302012 features a 5/8 (16mm) receiver with metal locking knob will accept any light fixture or accessory with a 5/8 (16mm) stud.
Kupo Camera/Umbrella Bracket, KG006411
$ 15.95
The KG006411 Camera / Umbrella Bracket is a handy accessory. It features two baby 5/8 (16 mm) receivers and a smaller receiver for an umbrella shaft. The KG006411 comes with a 1/4-20 camera mounting screw and a locking collar to tighten the camera against the bracket. This bracket will allow you to mount your camera on virtually any piece of grip equipment. The KG006411 is clad in a stealthy black finish.
Kupo Convi Clamp Saddle KG703411
$ 3.19
This Convi Clamp accessory is a durable triangular plastic wedge that presses into the jaw of any Convi Clamp to enable the clamp to be mounted securely on flat surfaces.
Kupo Double Sided Hex Joining Stud KG006812
$ 8.49
This Convi Clamp accessory is a solid steel short stud with two opposing hex studs for joining two Convi Clamps back to back.
Kupo Double Sided Joining Stud, 90/45 Degree Offset KG006912
$ 8.49
This Convi Clamp accessory is made from solid steel and features two opposing hex studs with the flat surfaces in 45 degree increments so that two Convi Clamps can be joined back to back at right or repeatable angles.
Kupo EZ Grip Finger with Baby 5/8 Inches (16mm) Stud & Receiver KG300612
$ 44.95
This adapter consists of a 5/8" (16mm) Stud on one side and a 5/8" (16mm Receiver) on the other connected by a large ball joint. The baby receiver has a metal knob to lock it securely in place.
Kupo Foamcore Fork with Baby, 5/8 Inches (16mm) Stud KG600611
$ 24.95
The Foam Core Fork stabs into the foam center and then the stud is placed in a grip arm or any other 5/8" baby receiver to be positioned anywhere as a reflector to bounce light or flag to block it.
Kupo Grip Arm Support, KG200912
$ 84.95
Generally when you extend a large accessory such a flag or light fixture laterally past the center column of a C stand, the increased leverage may be too much for the grip head to bear. In the old days you could rectify this situation using another C stand as an additional support, or a combination of clamps, grip heads and grip arms.Today Kupo has developed an innovative solution that rapidly mounts between both the riser section of a Master C Stand with help of either a Kupo 3 or 4 Way Clamp, and to a grip arm with the help of the included Kupo Tiny clamp already mounted on the other side of the Grip Arm Support. The Grip Arm Support has a built in ball joint that rotates 360 degrees for infinite flexibility and extends from 22 -30.7 (56 -78cm). With the addition of the Grip Arm Support, the load capacity at the end of your grip arm is greatly increased.
Kupo Grip Head with Hex Stud KG202011
$ 35.95
The 2-1/2 Grip Head, KG200912 consists of a pair of rotating aluminum discs attached to a hexagonal stud designed for the Convi and Super Viser Clamp systems. The discs have four different sized V shaped jaws to accept any accessory with a 5/8, 1/2, 3/8, 1/4 mounting stud or tubing. The V shaped jaws have teeth that grab whatever is mounted between the plates securely. The KG200912 uses a non-slip aluminum friction disc that will maintain its durability over time that offers the user positive locking strength and precise control. The 2 1/2 Grip Head is most often used in conjunction with a grip arm, giving you complete flexibility to position gobos go betweens such as flags, scrims and silks as well as other accessories virtually anywhere. This grip head is clad in a stealthy black powder coated finish.
Kupo Hex Baby Offset Arm - 8.4 Inches (215mm) KG000412
$ 38.95
This Convi Clamp accessory consists of an 8.5" (21.5 cm) extendable arm with two opposing baby (5/8" - 16mm) pins for mounting light fixtures or any other baby accessory with a baby receiver.
Kupo Hot Shoe Adapter KG006711
$ 9.59
The Kupo Hot Shoe Adapter is an all-metal micro clamp designed specifically for off-camera flashes. It comes equipped with a variable tension knob that locks securely around any flashes "foot" for a snug fit. The bottom of the adapter is tapped with a 1/4"-20 thread for easy mounting.
Kupo Junior 3-Inch Wall Plate, Junior 1-1/8-Inch(28mm) Receiver, KG003712
$ 27.95
The Kupo Junior 4 Wall Plate allows you to mount a 1-1/8 (28mm) receiver anywhere on a wall, other flat surface or just about anywhere. This plate gives you the option of mounting it by using screws or nails through any of the 8 anchor points pre-drilled into the plate. Attached to a wood or metal base, they make great free-standing floor mounts, also known as pigeon plates, or can be positioned almost anywhere when clamped between the discs of a grip head. The KG003712 comes with a metal locking knob and is clad in a chrome plated steel finish.
Kupo KS705312P 5-Inch Grip Pin Old Style (Black)
$ 87.95
Kupo KS705312 5" Grip Pin - Old Style 5" Grip Pin - Old Style KS705312 5" Grip Pin - Old Style
Kupo Kupole Tripod Base KD200412
$ 96.95
The Kupole Tripod Base allows you to use your Kupoles in a free standing environment where a solid ceiling surface may be too high to reach, too fragile such as with a drop ceiling or even outdoors.
Kupo Large Gaffer Grip, KG500511
$ 70.95
The Gaffer Grips are quick mount, multi-purpose clamps that will grab on most surfaces flat or round. They reinvent the standard spring clamp by adding strength and versatility. The Large Gaffer Grip is outfitted with a variable tension control knob and comes with a long removable baby 5/8 (16mm) pin mounted in a female baby 5/8 (16mm) receiver. If you're looking for a rapid, down and dirty way to mount a lighting fixture, the Gaffer Grips are always willing and able. The KG500511 jaws can be adjusted from 1/4 to 3-1/8 (0.63-7.93cm) and is clad in a stealthy black finish.
Kupo Max Arm with Hand Wheel KG100911
$ 102.95
The Max Arm with Hand Wheel is identical to the Max Arm with Adjustable Handle (KG100211) except it has a big hand wheel to adjust the tension as opposed to the ratcheted handle.
Kupo Max Arm, KG100211
$ 102.95
The Max arm is specially designed for lighting, video, film and photography. It's an adjustable arm that allows you to position a camera, lighting fixture or accessory in any position within seconds! The two 5/8 (16mm) studs at either end are attached to ball joints rotate 360 degrees, plus a cut-out in the sleeve surrounding the joint allows the stud to be bent at a 90 degree angle. One stud is tapped to receive a 3/8 -16 thread, while the other is tapped to receive 1/4 - 20 thread. Each stud has six milled flat surfaces, so whatever you mount on the Max Arm will not rotate. The central elbow rotates 360 degrees for infinite adjustability. The Max Arm is equipped with user-replaceable special friction discs with anti-slip rosettes prevent unwanted movement. The adjustable ratcheted handle slowly increases tension until all three joints lock at once making precise positioning a breeze.
Kupo Mini Flex Arm with Alligator Clip, KD700912
$ 28.95
The KD700912 is a mini flex arm with a 3/8-16 female thread inside a baby 5/8 (16mm) adapter on one side and an alligator clip on the other. It's the perfect accessory to hold small items such as a mini flag or reflector. The KD700912 is 11.4 (29mm) in length.
Kupo Off Camera Flash Alli Clamp KG302511
$ 69.95
This incredibly handy accessory consists of an Alli Clamp with a mini ball head and hot shoe enabling the user to mount and position an on-camera flash virtually anywhere in seconds!
Kupo Petite Clamp for Baby for 5/8 Inches (16mm) Tubing KG600712
$ 26.95
The Petite Clamp uses accessories from the 3 &; 4 Way Clamp system and allows you to mount them easily onto any grip arm or 5/8" (16mm) tubing
Kupo Pincer Clamp with 3/8-Inch-16F & 1/4-Inch-20F, KG702711
$ 25.00
The Pincer Clamp is a mini version of the Convi Clamp that's super lightweight and compact only weighing 4.58 oz (130 g). The specially formulated pads that line the jaws provide a strong grip on round and rectangular shapes. The Pincer Clamp is tapped with both 1/4'' and 3/8'' threads, ideal for mounting all cameras, lights, monitors and accessories weighing up to 11 lbs (5 Kg).
