Underwater Photography

Ikelite Underwater Housing for Nikon P7800 - Underwater - Ikelite - Helix Camera

Ikelite Underwater Housing for Nikon P7800 $ 749.95 - Sold Out

Quick Shop

Ikelite Underwater Housing for Nikon P7800

$ 749.95 - Sold Out

Ikelite Underwater Housing for Nikon P7800 - 618278

Ikelite Product Number 6182.78

Dive into underwater photography with this compact yet sophisticated system!

The True TTL Advantage

TTL or "Through-The-Lens" flash metering means the strobe interprets information from the camera to control flash duration and properly expose an image. TTL may be accomplished directly through electrical signals from the camera, or indirectly through watching the behavior of the camera's built-in flash.

Circuitry built into this housing allows the camera to communicate directly with compatible underwater strobes (see Strobe Compatibility section below). When connected via this circuitry, the camera learns that an external flash is attached and is able to more accurately adjust exposure by knowing this. The camera's flash will not fire, eliminating the shutter lag associated with waiting for the camera's flash to recycle.

Sync Cord Connections

The Ikelite-style electrical bulkhead is widely recognized as the most reliable waterproof strobe sync connection available. In order to communicate with the camera, compatible Ikelite DS strobes must be connected to the housing's electrical bulkhead using a single or dual TTL sync cord.

Non-Ikelite strobes may be connected to this bulkhead using a compatible sync cord, however the housing's circuitry will not receive power and the strobes will operate in manual exposure modes only.

Whether in TTL or manual exposure, use of an electrical sync cord eliminates the issues of signal interference, inconsistent exposure due to weak fiber optic transmission, and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off. Sync cords are comparably priced to fiber optic cords and are equally durable.

Construction

Durable polycarbonate and acrylic construction provides a unique view of the camera to ensure correct waterproof installation and confidence underwater. Simply close the two stainless steel locking lid snaps, and see the o-ring form a solid black, watertight seal. Large, ergonomic controls provide access to all important camera functions including front and rear dials. An included tray with soft-grip handle provides comfortable handling underwater and our signature quick release attachment system for lighting accessories.

Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.

Wide Angle, Macro + Filters

The housing port is designed to accept color filter, wide angle, and macro options for 3.9-inch diameter ports. Light is absorbed very quickly as it passes through water. A subject will look darker, less colorful and somewhat grainy when viewed through even a few feet of water. The addition of a compatible wide angle accessory expands the camera's field of view underwater, providing the opportunity to get as close as possible to the subject and reduce the amount of water light passes through. The results speak for themselves - photos with the best color, exposure and clarity possible.

Strobe Compatibility

AF35: no
DS50: yes, above serial number 70000
DS51: yes
DS125: yes, above serial number 5000
DS160, DS161: yes
DS200: yes
Non-Ikelite: yes, manual flash exposure only

What's Included

Housing
Tray with handle
Port cover
Flash diffuser
Flash deflector
Silicone lubricant 1cc tube
1 year manufacturer warranty

Specifications

200 ft (60m) depth rating
Controls for all camera functions except Monitor Button, Flash Pop-up Control, Diopter Adjustment Control or Fn1 Button
Ikelite 5-pin bulkhead with TTL circuitry
Near neutral buoyancy in fresh water
Tray mounts with 3/8-16 bolts with 3 in spacing (76mm)
Weight 4.7 lb (2.1 kg)
Dimensions 7.4 x 6.4 x 6.8 in (19 x 16 x 17 cm) including projections
3.9-inch (99 mm) diameter glass lens port

View full product details →

Ikelite Underwater Housing for Nikon S500 & S510 - Underwater - Nikon - Helix Camera

Ikelite Underwater Housing for Nikon S500 & S510 $ 199.00

Quick Shop

Ikelite Underwater Housing Back for Nikon D500 50FT - Underwater - Ikelite - Helix Camera

Ikelite Underwater Housing Back for Nikon D500 50FT $ 449.95

Quick Shop

Ikelite Underwater Housing for Nikon D500 50DL - Underwater - Ikelite - Helix Camera

Ikelite Underwater Housing for Nikon D500 50DL $ 1,395.00

Quick Shop

Ikelite Underwater Housing Back for Nikon D500 Back 200FT - Underwater - Ikelite - Helix Camera

Ikelite Underwater Housing Back for Nikon D500 Back 200FT $ 649.95

Quick Shop

Ikelite Underwater Housing for Nikon D500 200DL - Underwater - Ikelite - Helix Camera

Ikelite Underwater Housing for Nikon D500 200DL $ 1,595.00

Quick Shop

Ikelite Underwater Housing for Nikon S7000 - Underwater - Ikelite - Helix Camera

Ikelite Underwater Housing for Nikon S7000 $ 324.95

Quick Shop

Ikelite Underwater Housing for Nikon S7000

$ 324.95

Ikelite Underwater Housing for Nikon S7000 - 628270

Ikelite Product Number 6282.70

Dive into underwater photography with this compact and easy to use system.

Construction

Durable clear polycarbonate construction provides a unique view of the camera to ensure correct waterproof installation and confidence underwater. The camera installs with drop-in loading for quick and easy set up. Simply close the side latch and see the o-ring form a solid black, watertight seal. Large, ergonomic controls provide access to all important camera functions.

Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.

Flash

An included flash diffuser improves lighting quality when the camera's built-in flash is used. A built-in flash is effective between 1-3 feet (0.3-0.9m) from the subject in clear conditions. For best results a color correcting filter or external lighting is recommended. External lighting is more powerful than the camera's flash and can be placed in a position to virtually eliminate the backscatter - or "snow" - from your underwater images.

The optional AF35 strobe triggers and provides automatic TTL exposure by watching the camera's built-in flash, without the need of fiber optic cords or sensors. Alternatively, two ports are provided for the connection of up to two Ikelite-, SEA&SEA-, or Olympus-type fiber optic cords.

Wide Angle, Macro + Filters

The housing port is designed to accept color filter, wide angle, and macro options for 3.9-inch diameter ports. Light is absorbed very quickly as it passes through water. A subject will look darker, less colorful and somewhat grainy when viewed through even a few feet of water. The addition of a compatible wide angle accessory expands the camera's field of view underwater, providing the opportunity to get as close as possible to the subject and reduce the amount of water light passes through. The results speak for themselves - photos with the best color, exposure and clarity possible.

What's Included