Ikelite SKU: 4401.3 | Helix SKU: 44013
Converts the electrical bulkhead of any Ikelite DS strobe into a fiber optic port.
This 3rd Generation of the Fiber Optic Converter features a hard anodized aluminum plug connection which reduces weight without sacrificing durability. It is recommended for use with any Ikelite strobe produced September 2018 or later with a hard anodized aluminum bulkhead.
Like the 2nd Generation model, this Fiber Optic Converter features heightened sensitivity for use with SEA&SEA or Nauticam housings with internal electrical-to-optical flash triggering devices. These devices translate the camera's electrical signals into a series of LED flashes which are much less bright than a traditional built-in camera flash. The Fiber Optic Converter is also compatible with any system where the camera's built-in flash can be seen by a fiber optic cord.
Attachment and Use
The Converter simply attaches to the strobe's electrical bulkhead in place of a sync cord connector. The enlarged slave window provides approximately 90 degrees field of view for remote triggering.
The Fiber Optic Converter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. Simply turn on your strobe and take one picture to configure. This adapter is a manual exposure (non-TTL) trigger only. The strobe's output may be adjusted using the manual power settings built into the strobe (varies by model).
An individual Fiber Optic Converter and compatible cord is needed for each strobe. Use of two strobes requires two Fiber Optic Converters.
This converter attaches to an Ikelite DS strobe. It is not intended to be attached to a housing and will provide no functionality if attached to an Ikelite bulkhead in a housing.
There are two shooting scenarios where the High Sensitivity Optical Slave Converter # 4405 would be a better option:
Ikelite DS50, DS51
Ikelite DS160, DS161
Fiber Optic Cord Compatibility
Ikelite Fiber Optic Coiled Cord # 4501
INON Optical D Cable "Non-wireless type" L-Connector
SEA&SEA Fiber Optic Cable (L-type) # 50107
SEA&SEA Fiber Optic Cable II # 50128
Olympus UW Fiber Optic Cable PTCB-E02
Nauticam Optical Fiber Cable # 26211 Nauticam to INON
Nauticam Optical Fiber Cable # 26212 Nauticam to Sea&Sea
Fiber Optic Converter
Connector protector # 0301.12
The Epoque ELH-MF is a Multi-Lens Adapter for Small Cameras and Housings. This Epoque Multi-Lens Adapter allows you to attach the Epoque DCL20-67DR wide-angle and DML-2-67DR macro lenses to most small underwater cameras and housings. The unique three way positioning and alignment adjustments (Left/Right; Front/Back; Up/Down) allows you to position the auxiliary lens perfectly in front of the camera port. In order to get the best quality underwater images you must be very close to your subject. The goal is to eliminate as much water as possible between your lens and the subject. Wide-angle lenses allow you to be close and still photograph a large area. Macro lenses allow you to get close to very small subjects. The Epoque Multi-Lens Adapter allows you to use these lenses on housings and cameras that usually do not support auxiliary lenses.
$ 124.95The Fiber Optic Adapter converts the electrical bulkhead of any Ikelite DS Substrobe into a fiber optic port. This adapter is a manual exposure (non-TTL) trigger only. The strobe's output must be adjusted using the manual power settings built into the strobe (varies by model). The Fiber Optic Adapter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. Simply turn on your Substrobe and take one picture to configure. An individual Fiber Optic Adapter is needed for each Substrobe. Use of two Substrobes requires two Fiber Optic Adapters. Depth rated to 300 feet (90 meters). Requirements for Use 1. Any Ikelite DS Substrobe: Compatible Substrobes include DS50, DS51, DS125, DS160 and DS161 models. The AF35 AutoFlash is not compatible with the #4401 adapter. 2. One of the following fiber optic cables (not available through Ikelite): INON Optical D Cable "Non-wireless type" L-Connector * SEA&SEA Fiber Optic Cable (L-type) Product No. 50107 Olympus UW Fiber Optic Cable PTCB-E02 Nauticam Optical Fiber Cable No. 26211 Nauticam to INON Nauticam Optical Fiber Cable No. 26212 Nauticam to SEA&SEA 3. Compatible camera and housing: Underwater housing must allow use of the camera's built-in flash and have a means by which to attach a fiber optic cable. Ike