RØDE NT-USB USB Condenser Microphone
$ 199.00 - Vendido
RØDE NT-USB USB Condenser Microphone
RØDE SKU: NT-USB | Helix SKU: RMNTUSB
Overview
- High quality studio microphone with the convenience of USB connectivity
- Pop shield, Tripod desk stand, ring mount, storage pouch and 6m (20’) USB cable included
- 3.5mm stereo headphone jack for zero-latency monitoring
- Direct mix control between mic input and source output
- Compatible with Apple® iPad
- Two year extended warranty when you register your microphone
The NT-USB is a highly versatile side-address microphone that is ideal for recording singing and musical performances in addition to spoken applications such as podcasting and voice-over.
It is fully compatible with all mainstream recording applications on both Windows and Mac OS based computers, as well as the Apple iPad using RØDE Rec, GarageBand, or any other recording app that accepts an external microphone. Use on the Apple iPad requires a suitable USB connection adaptor, such as the Apple Camera Connection Kit.
The body of the NT-USB features a zero-latency stereo headphone monitoring (3.5mm) jack, which allows you to monitor the microphone input in realtime, along with dials to adjust the monitoring level and mix between the computer/iPad audio and the microphone input.
A premium pop-filter is included, which fits onto the base of the mic, positioning the filter the ideal distance from the capsule to minimise plosives (hard ‘B’, ‘T’ or ‘P’ sounds that produce a harsh sound) during singing or speech. Also provided is a high-quality stand mount with industry standard 3/8” thread, desktop tripod stand that allows the NT-USB to sit at a comfortable height on a tabletop, and a pouch for storage of the microphone when not in use.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer, A/D converter 16bit 48kHz |
| Capsule | 0.50" |
| Polar Pattern |  |
| Resolution | 16-bit |
| Address Type | Side |
| Frequency Range | 20Hz - 20kHz |
| Maximum SPL | 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Power Options |  |
| Weight | 520gm |
| Dimensions | 184mmH x 62mmW x 50mmD |
| Output | |
| Warranty | 1 year with free extension to 2 years following registration |
Rode VideoMicro Compact On-Camera Microphone VideoMicro
$ 59.00 - Vendido
Rode VideoMicro Compact On-Camera Microphone
RODE SKU: VideoMicro | Helix SKU: RMVideoMicro
Overview
- Compact size and lightweight - only 80mm (3’) long and 42gm (1.5oz)
- All-metal microphone body
- No battery required (powered by camera plug-in power - min 3V)
- Rycote® Lyre® shock mount included
- Deluxe furry windshield included
- Designed and manufactured in Australia
- Two year extended warranty when you register your microphone
The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. Its pickup is more forgiving than RØDE’s other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount. Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness. Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RØDE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.
VideoMicro Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 100Hz - 20kHz |
| Maximum SPL | 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -33.0dB re 1 Volt/Pascal (22.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 20dB-A |
| Power Options | Phantom Power Required |
| Weight | 42gm |
| Dimensions | 21mmH x 21mmW x 80mmD |
| Output |  |
| Warranty | 1 year with free extension to 2 years following registration here |
RODE smartLav+ Lavalier Condenser Microphone for Smartphones
$ 79.00 - Vendido
RODE smartLav+ Lavalier Condenser Microphone for Smartphones
Rode SKU: amart Lav+ | Helix SKU: RMsmartLavP
Overview
- Broadcast quality, professional-grade Lavalier Mic with TRRS Jack
- High-quality omni-directional condenser capsule
- Discrete 4.5mm miniature microphone
- Compatible with iOS devices and select Android devices*
- Kevlar® reinforced cable
- Includes wind shield and durable mounting clip
- Twelve month warranty
The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.
With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RØDE Rec app for iOS, or any other audio app of their choice.
By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.
A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ‘b’, ‘t’ and ‘p’ sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar® reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.
The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RØDE’s RØDE Rec app for Apple iOS devices. RØDE Rec turns the user’s iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.
Specifications
| Acoustic Principle | Permanently Polarise |
| Active Electronics | JFET |
| Capsule | 0.10" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3Ω |
| Maximum SPL | 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 189.0mV |
| Sensitivity | -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 27dB-A |
| Weight | 6.00gm |
| Dimensions | 1180.00mmH x 4.50mmW x 4.50mmD |
| Output |  |
| Warranty | 1 year |
What's in the Box
|
smartLav+ Lavalier microphone for smartphones |
 |
LAV-CLIP Microphone Mounting Clip |
 |
WS-LAV Pop Filter/Wind Shield |
RODE Procaster Broadcast Quality Dynamic Microphone
$ 229.00
RODE Procaster Broadcast Quality Dynamic Microphone
Rode SKU: Procaster | Helix SKU: RMProcaster
Overview
Broadcast quality cardioid end-address dynamic microphone
- Broadcast quality sound
- High output dynamic capsule
- Balanced, low impedance output
- Internal shock mounting of capsule for low handling noise
- Internal pop-filter to reduce plosives
- Robust, all-metal construction
- 10 year extended warranty when you register your microphone
The RØDE Procaster is a professional broadcast quality dynamic microphone, specifically designed to offer no-compromise performance for voice applications in the broadcast environment.
Featuring a tight polar pattern and tailored-for-voice frequency response, the Procaster is perfect for every application where a great sounding, robust microphone with superior ambient noise rejection is demanded.
The Procaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.
Its high output dynamic capsule and balanced low impedance output make it an ideal broadcast and voice over microphone.
The RØDE Procaster microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Dynamic |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 75Hz - 18kHz |
| Output Impedance | 320Ω |
| Sensitivity | -56.0dB re 1 Volt/Pascal (1.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Weight | 745.00gm |
| Dimensions | 214.00mmH x 53.00mmW x 53.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 10 years following registration |
RODE Reporter Omnidirectional Handheld Interview Microphone
$ 129.00 - Vendido
RODE Reporter Omnidirectional Handheld Interview Microphone
Rode SKU: Reporter | Helix SKU: RMReporter
Overview
- Omnidirectional polar pattern
- Broadcast recording presentation and interview microphone
- “Tailored for voice” frequency response
- Ergonomic die-cast body
- Multi-layer mesh basket for wind protection
- Includes detachable microphone flag and zip case
- 10 year extended warranty when you register your microphone
Designed for handheld interview and presentation applications, the Reporter features an omnidirectional dynamic capsule that is designed to allow the user freedom of use, without the technique related issues typical of directional end-address microphones.
Additionally its frequency response has been specially tailored for voice reproduction, to maximise intelligibility and deliver crisp, clear results in almost any condition.
The microphone features a durable die-cast aluminium alloy body coated in a discrete matte black anti-glare finish. An innovative multi-layer mesh basket protects the microphone from environmental noise without the need for a bulky and distracting foam wind shield.
It is supplied with a removable microphone ‘flag’ that can accommodate high-visibility branding.
The RØDE Reporter microphone is designed in Australia and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Dynamic |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 70Hz - 15kHz |
| Output Impedance | 150Ω |
| Sensitivity | -56.0dB re 1 Volt/Pascal (1.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Weight | 256.00gm |
| Dimensions | 272.50mmH x 41.50mmW x 41.50mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE Omnidirectional Lavalier Microphone
$ 249.00
RODE Omnidirectional Lavalier Microphone
Rode SKU: Lavalier | Helix SKU: RMLavalier
Overview
The RØDE Lavalier is a discreet lapel microphone that provides broadcast-quality audio when close-miked in almost any scenario.
The Lavalier's low self-noise, user friendly omni-directional polar pattern and minimal appearance make it an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen.
The microphone capsule is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the included cable management clips ensure that you are able to minimise the microphone and cable visibility, while providing maximum mobility for the wearer.
The supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories.
Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the Lavalier and a wide range of wireless systems as well as consoles, cameras and portable recorders.
The RØDE Lavalier lapel microphone is designed and made in Australia and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement microphone during the extended warranty period.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.10" |
| Address Type | End |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3000Ω |
| Maximum SPL | 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 189.0mV |
| Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 25dB-A |
| Weight | 1.00gm |
| Dimensions | 12.00mmH x 4.50mmW x 4.50mmD |
| Warranty | 1 year with free extension to 5 years following registration |
IN THE BOX:
RØDELink Wireless Filmmaker Kit
$ 399.00 - Vendido
RØDELink Wireless Filmmaker Lavalier Kit
RØDE SKU: RODElink Film Maker Kit | Helix SKU: RMRODEFilmMakerKit
Overview
- Series II, 2.4GHz digital transmission
- 128-bit encryption
- Up to 100 metres range*
- OLED display (on receiver)
- One button pairing
- Three level gain control
- AA battery or USB powered
- Includes broadcast Lavalier microphone
- Two year extended warranty when you register your microphone
RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDE’s omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.
| Transmission type | 2.4GHz Fixed Frequency Agile System |
| System dynamic range | 112dB |
| Range (distance) | Up To 100m |
| Frequency range | 35Hz - 22kHz |
| Maximum output level | 1v Rms (2.8v P-p) |
| Max input signal level | 1v Rms (2.8v P-p) |
| Max latency | 4ms |
| Power source | 2 X AA Battery Or MicroUSB |
| Antenna | Internal |
| Input connection | 3.5mm TRS Locking Jack Socket - Dual Mono |
| Input impedance | 300Ω |
| Dimensions | 111mm X 65mm X 52mm |
| Weight | 190gm |
| Power source | 2 X AA Battery Or MicroUSB |
| Antenna | Internal |
| Input connection | 3.5mm TRS Locking Jack Socket |
| Input impedance | 10kΩ |
| Dimensions | 111mm X 65mm X 40mm |
| Weight | 190gm |
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.10" |
| Address Type | End |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3000Ω |
| Maximum SPL | 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 189.0mV |
| Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 25dB-A |
| Weight | 1.00gm |
| Dimensions | 12.00mmH x 4.50mmW x 4.50mmD |
RØDE NT2000 Variable Pattern Studio Condenser Microphone
$ 599.00 - Vendido
RØDE NT2000 Variable Pattern Studio Condenser Microphone
RØDE SKU: NT2000 | Helix SKU: RMNT2000
Overview
Seamlessly variable dual 1" condenser microphone featuring continually variable polar pattern (omni through cardioid to figure 8), HPF and PAD.
- Large 1” HF1 gold sputtered capsule
- Continuously variable polar pattern, from Omni to Cardioid to Figure 8 controlled on the mic
- Continuously variable PAD and High-Pass Filter
- Ultra low noise, transformerless surface mount circuitry
- Wide dynamic range
- High strength welded and heat treated steel mesh head
- Internal capsule shock mounting
- Includes SM2 shock mount and RC1 case
- 10 year extended warranty when you register your microphone
The RØDE NT2000 microphone is a studio-quality large diaphragm condenser with seamlessly variable polar patterns. Its polar patterns selection, filter and pad are conveniently located on the front of the microphone body for ease of use.
Audiophile quality surface-mount electronics combined with a gold-sputtered dual 1" capsule provide extremely low self-noise (7dBA) and a maximum SPL of 147 dB (up to 157 dB with pad fully engaged) giving an incredible amount of versatility and ensuring exceptional results.
The RØDE NT2000 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 1.00" |
| Polar Pattern |
Figure 8 - picks up from the front and rear and rejects sides
|
| Address Type | Side |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 15.0mV |
| Sensitivity | -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 7dB-A |
| Power Options |
 
|
| Weight | 831.00gm |
| Dimensions | 208.00mmH x 55.00mmW x 55.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE Stereo VideoMic X
$ 599.00 - Vendido
RODE Stereo VideoMic X
Rode SKU: SVMX | Helix SKU: RMSVMX
Overview
- Acoustically matched true condenser capsules
- Rycote® Lyre onboard shock mounting
- Balanced professional XLR output
- Heavy-duty, lightweight aluminium construction
- High Pass Filter
- 9V or Phantom Power (P48 - via miniXLR)
- Level adjustment
- High Frequency Boost
- Includes SC2 TRS cable, pop shield and wind shield
- 10 year extended warranty when you register your microphone
The Stereo VideoMic X is the ultimate broadcast-grade stereo microphone for on-camera use. Utilising all-metal construction, it is incredibly robust making it ideal for regular professional use, while also providing high levels of resistance to RF interference. The mic features a matched pair of ½” true-condenser capsules, configured in a stacked X-Y configuration, providing a highly-immersive soundscape. Each capsule is supported by the Rycote® Lyre® shock-mounting system, providing isolation from vibration as well as knocks and bumps. Digital switching on the rear of the SVMX allows the user to control the level adjustment (-10dB or +20dB), high-pass filter (0/75/150Hz) and an innovative high-frequency boost (+6dB @ XHz) designed to boost the intelligibility of dialogue. In a first for the VideoMic range, professional-grade balanced outputs are available on the side of the body, in addition to the RF shielded 3.5mm stereo output cable. An outer dome structure provides physical protection for the sensitive capsules, while reducing wind noise in the same manner as RØDE’s RedDot-winning Blimp.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 12dB-A |
| Power Options |
|
| Weight | 300gm |
| Dimensions | 102mmH x 118mmW x 100mmD |
| Output |
|
| Warranty | 1 year with free extension to 10 years following registration |
RODE NTG1 Condenser Shotgun Microphone
$ 249.00
RODE NTG1 Condenser Shotgun Microphone
Rode SKU: NTG1 | Helix SKU: RMNTG1
Overview
Directional super cardioid condenser shotgun microphone with switchable HPF
- Broadcast sound quality
- Low noise circuitry
- Super-cardioid polar pattern
- Condenser transducer
- Rugged metal construction
- Two step High Pass Filter (Flat/80Hz)
- Low handling noise
- Low weight - 105g (3 oz.)
- Includes mic clip, wind shield and zip case
- Ideal for professional applications within the film, video, television and production industries
- 10 year extended warranty when you register your microphone
The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
The RØDE NTG1 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance convertor with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 50Ω |
| Maximum SPL | 139dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 6.9mV |
| Sensitivity | -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dB-A |
| Power Options |
+24V phantom power required from mixer or interface
|
| Weight | 105.00gm |
| Dimensions | 219.00mmH x 22.00mmW x 22.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE Broadcaster Condenser Microphone
$ 419.00 - Vendido
RODE Broadcaster Condenser Microphone
Rode SKU: Broadcaster | Helix SKU: RMBroadcaster
Overview
Precision 1" broadcast cardioid end-address condenser microphone. Features unique 'on air' indicator.
The RØDE Broadcaster is a large diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications.
Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television
The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster's native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.
The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
The RØDE Broadcaster microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 1.00" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 40Ω |
| Maximum SPL | 128dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 2.0mV |
| Sensitivity | -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 14dB-A |
| Power Options |
+24V phantom power required from mixer or interface
|
| Weight | 577.00gm |
| Dimensions | 167.00mmH x 50.00mmW x 65.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE PinMic-Long Wearable Microphone
$ 249.00 - Vendido
RODE PinMic-Long Wearable Microphone
Rode SKU: PinMic-Long | Helix SKU: RMPinMicLong
Overview
Unique lapel style 'pin-through' microphone that attaches to clothing and fabric almost anywhere. Long pin version.
- Intuitive And Subtle
- Omni-directional polar pattern
- Removable Mesh Head
- Ultra Discreet Appearance
- Lightweight And Easy To Position
- High Quality Performance
- Low Noise Miniature Microphone Capsule
- Low Handling Noise
- Universal Compatibility
- RØDE Micon interconnectivity system provides seamless integration with a wide range of wireless systems
- Includes mini-furry, anti-trauma case, spare capsule and PinMic tool kit
- Five year extended warranty when you register your microphone
The RØDE PinMic™ is a discreet lavalier/lapel microphone with an innovative pin-through design that is not only easier to conceal than a traditional lapel microphone, but provides greater mounting versatility.
Comprised of a cabled backplate and a removable omni-directional capsule head, the PinMic™ is easily mounted onto any clothing or fabric by simply pushing the backplate pins through the back of the fabric and sliding the capsule into place on the front. The microphone backplate and cable are hidden behind the fabric, and the capsule head can be easily disguised, covered or decorated to further conceal the microphone.
The PinMic™ capsule is discrete at only 9mm deep and 11mm in diameter, and is supplied with both a black and an unpainted silver mesh head that can be further camouflaged by painting.
The microphone easily mounts through any fabric up to 1.5mm (0.006") thick without any damage to clothing. A longer pin version (PinMic-Long) is available for mounting on thicker fabrics (up to 3.5mm/0.14" thick).
The microphone capsule is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested to ensure reliable performance.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, while the anti-trauma water resistant case provides rugged and secure protection for the microphone, a spare capsule head, the microphone cable and included accessories.
The PinMic™ is an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen.
Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the PinMic™ and a wide range of wireless systems as well as consoles, cameras and portable recorders.
The RØDE PinMic™ lapel microphone is designed and made in Australia and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement microphone during the extended warranty period.
Specifications
| Acoustic Principle |
Pressure Gradient |
|
Active Electronics |
JFET impedance converter |
| Capsule | 0.10" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3000Ω |
| Maximum SPL | 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 189.0mV |
| Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 25dB-A |
| Power Options |
+48V phantom power required from mixer or interface
|
| Weight | 10.00gm |
| Dimensions | 16.00mmH x 22.00mmW x 33.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 5 years following registration |
Rode NTG4 Shotgun Microphone with Digital Switches
$ 499.00 - Vendido
Rode NTG4 Shotgun Microphone with Digital Switches
RØDE SKU: NTG4 | Helix SKU: RMNTG4
Overview
- Broadcast sound quality
- Low noise circuitry
- Rugged metal construction
- Convenient digital switching
- High Frequency Boost
- High Pass Filter (Flat/75Hz)
- PAD (-10db)
- 10 year extended warranty when you register your microphone
The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.
Specifications
| Acoustic Principle | Line Gradient |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz(selected HPF @75Hz) |
| Output Impedance | 200Ω |
| Maximum SPL | 135dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 16dB-A |
| Power Options |
+12V phantom power required from mixer or interface
|
| Weight | 126gm |
| Dimensions | 225mmH x 22mmW x 22mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE NT3 Microphone
$ 269.00 - Vendido
RODE NT3 Microphone
Rode SKU: NT3 | Helix SKU: RMNT3
Overview
Multi-powered 3/4" cardioid condenser microphone. P48 and 9V battery powered.
- True condenser externally biased 3/4” capsule
- Dual power operation
- Cast metal body with durable satin-nickel finish
- Transformerless output
- Internal capsule shock mounting
- High level of RF rejection
- Audio-grade surface mount components
- Full frequency response
- 10 year extended warranty when you register your microphone
The NT3 is the definition of a studio workhorse. Featuring an end-address 3/4" gold-sputtered true-condenser transducer it provides incredible detail on almost any instrument you can imagine.
Intended for studio, stage and location work, this versatile handheld, stand or boompole mounted microphone will give great results on drums, percussion, acoustic guitar, guitar amps, piano and all acoustic instruments as well as detailed voice reproduction when used as a handheld presentation microphone or indoor boom mic.
For further versatility the NT3 can be powered by either P48 phantom power, or via a 9V battery for situations when power isn't available via the console or camera. Its rugged and durable all-metal body and mesh head ensure that it is well protected both in the studio and out in the field.
The RØDE NT3 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.75" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 9.5mV |
| Sensitivity | -39.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 16dB-A |
| Power Options |
|
| Weight | 371.00gm |
| Dimensions | 206.00mmH x 32.00mmW x 32.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE NTG8 RF-bias Long Shotgun Microphone
$ 999.00 - Vendido
RODE NTG8 RF-bias Long Shotgun Microphone
Rode SKU: NTG8 | Helix SKU: RMNTG8
Overview
Broadcast Quality RF-bias Shotgun Microphone. IncludesSM8 shock mount, WSNTG8 Windscreen and RCNTG8 storage cylinder.
- Superior broadcast sound quality
- High Sensitivity
- Super-cardioid polar pattern
- Highly directional polar response
- Natural sounding audio both on and off-axis
- Designed to withstand adverse environmental conditions
- Extremely low handling noise
- High level of immunity to radio frequency interference
- True Condenser (external RF biased)
- Includes weatherproof aluminium cylinder for transport, SM8 shock mount and wind shield
- 10 year extended warranty when you register your microphone
Based on RØDE's award winning NTG3 shotgun microphone, the NTG8 is a broadcast quality RF-bias shotgun microphone that exhibits increased directionality across a wide frequency response range. This makes the NTG8 the perfect microphone for film, television, sports and outdoor broadcasting, live performance, and any professional distance miking application.
Like the NTG3, the NTG8 features low self-noise, natural sound without colouration both on and off-axis, and RF bias technology to ensure that it is almost completely resistant to high humidity environments which could cause other condenser microphones to fail.
The NTG8 is finished in matte black and supplied with a specially designed shock mount (SM8) that is engineered to provide excellent handling noise isolation, cable management and versatile mounting options for the microphone. A rugged weatherproof aluminium cylinder is also included, providing ultimate protection for the microphone when in transport or storage. The WSNTG8 windshield completes the package, providing light environmental protection.
The RØDE NTG8 long shotgun microphone is designed in Australia and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | RF Bias |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 25Ω |
| Maximum SPL | 124dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 8.2mV |
| Sensitivity | -20.0dB re 1 Volt/Pascal (97.50mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 8dB-A |
| Power Options | |
| Weight | 345.00gm |
| Dimensions | 559.00mmH x 19.00mmW x 19.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE NTG3 Precision RF-Biased Shotgun Microphone - Matte Black
$ 699.00
RODE NTG3 Precision RF-Biased Shotgun Microphone - Matte Black
Rode SKU: NTG3B | Helix SKU: RMNTG3B
Overview
Precision broadcast-grade super cardioid shotgun mic. With stands adverse environmental conditions. Matte black finish, RCNTG3 storage cylinder
- Superior broadcast sound quality
- High Sensitivity
- Super-cardioid polar pattern
- Designed to withstand adverse environmental conditions
- 50% less self-noise than the majority of shotgun microphones
- Extremely low handling noise
- High level of immunity to radio frequency interference
- True Condenser (external RF biased)
- Includes durable aluminium storage cylinder for transport, pop filter, mic clip and large zip pouch
- Designed for professional use on film, television, ENG & wherever high resolution broadcast audio is required
- 10 year extended warranty when you register your microphone
The RØDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required.
As RØDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich, warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue.
Machined from solid brass and available in either anti-glare, nickel-plated finish or matte black (NTG3B), the NTG3 is incredibly robust while remaining light weight.
Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time.
A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone's rugged performance credentials.
The RØDE NTG3 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | RF Bias |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 25Ω |
| Maximum SPL | 130dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 8.2mV |
| Sensitivity | -30.0dB re 1 Volt/Pascal (31.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 13dB-A |
| Power Options | |
| Weight | 163.00gm |
| Dimensions | 255.00mmH x 19.00mmW x 19.00mmD |
| Output |
3-pin XLR Output
|
| Warranty | 1 year with free extension to 10 years following registration |
RODE NTG3 Precision RF-Biased Shotgun Microphone - Silver
$ 699.00 - Vendido
RODE NTG3 Precision RF-Biased Shotgun Microphone - Silver
Rode SKU: NTG3 | Helix SKU: RMNTG3
Overview
Precision broadcast-grade super cardioid shotgun mic. Withstands adverse environmental conditions. RCNTG3 storage cylinder
- Superior broadcast sound quality
- High Sensitivity
- Super-cardioid polar pattern
- Designed to withstand adverse environmental conditions
- 50% less self-noise than the majority of shotgun microphones
- Extremely low handling noise
- High level of immunity to radio frequency interference
- True Condenser (external RF biased)
- Includes durable aluminium storage cylinder for transport, pop filter, mic clip and large zip pouch
- Designed for professional use on film, television, ENG & wherever high resolution broadcast audio is required
- 10 year extended warranty when you register your microphone
The RØDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required.
As RØDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich, warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue.
Machined from solid brass and available in either anti-glare, nickel-plated finish or matte black (NTG3B), the NTG3 is incredibly robust while remaining light weight.
Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time.
A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone's rugged performance credentials.
The RØDE NTG3 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | RF Bias |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 25Ω |
| Maximum SPL | 130dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 8.2mV |
| Sensitivity | -30.0dB re 1 Volt/Pascal (31.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 13dB-A |
| Power Options | |
| Weight | 163.00gm |
| Dimensions | 255.00mmH x 19.00mmW x 19.00mmD |
| Output |
3-pin XLR Output
|
| Warranty | 1 year with free extension to 10 years following registration |
RØDE NTG4 Shotgun Microphone with Digital Switches & Rechargable Lithium Battery
$ 399.00 - Vendido
RØDE NTG4 Shotgun Microphone with Digital Switches & Rechargable Lithium Battery
RØDE SKU: NTG4+ | Helix SKU: RMNTG4P
Overview
- Broadcast sound quality
- Low noise circuitry
- Rugged metal construction
- Convenient digital switching
- High Frequency Boost
- High Pass Filter (Flat/75Hz)
- PAD (-10db)
- 10 year extended warranty when you register your microphone
The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.
Specifications
| Acoustic Principle | Line Gradient |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz(selected HPF @75Hz) |
| Output Impedance | 200Ω |
| Maximum SPL | 135dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 16dB-A |
| Power Options |
+12V phantom power required from mixer or interface
|
| Weight | 126gm |
| Dimensions | 225mmH x 22mmW x 22mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
Rode Stereo VideoMic Pro Rycote
$ 299.00 - Vendido
Rode Stereo VideoMic Pro Rycote
Rode SKU: Stereo Video Mic Pro-R | Helix SKU: RMStereoVideoMicProR
Overview
- Rycote® Lyre® shock mounting onboard
- Broadcast recording quality on-camera microphone
- All new matched pair 1⁄2” condenser capsules in XY stereo configuration
- Improved foam windscreen
- Ultra lightweight, compact form factor
- On mic power and EQ controls
- Two step High Pass Filter (flat, 75Hz)
- Three position level control (-10dB, 0, +20dB)
- 9V battery powered - over 100 hours use (alkaline)
- New Kevlar reinforced braided cable
- Billeted metal camera shoe mount with 3/8” thread for easy boompole mounting
- 10 year extended warranty when you register your microphone
The new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.
Based around the all new capsule with its matched pair of high sensitivity ½”cardioid condensers in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.
Another new addition is the integrated Rycote® Lyre® based shock mounting system, which separates the Stereo VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
The Stereo VideoMic Pro, with its ergonomic form factor, make it perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The newly designed Kevlar reinforced braided cable, as well as the improved foam windscreen, provides excellent acoustic decoupling from the camera and offers significantly lower noise transference and higher sensitivity.
The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.
A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.
Like the VideoMic Pro, the Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
The RØDE Stereo VideoMic Pro is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50" |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 134dBSPL |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dBA |
| Weight | 116g |
| Dimensions | 134mmH x 80mmW x 115mmD |
| Warranty | 1 year with free extension to 10 years following registration |
RØDE NTG2 Condenser Shotgun Microphone
$ 269.00
RØDE NTG2 Condenser Shotgun Microphone
Rode SKU: NTG2 | Helix SKU: RMNTG2
Overview
The RØDE NTG2 is a new, lightweight condenser shotgun microphone, designed for professional applications within the film, video, television, and production industries. The NTG2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V phantom power. A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the NTG2 the perfect choice for film, video engineering, and voice-over work. The NTG2 is extremely lightweight making it ideal for mounting directly to video cameras or on boom poles.
The NTG2 comes complete with zip pouch, stand mount, and windshield. The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions.
- Broadcast sound quality
- Low noise circuitry
- 48V phantom power or 1.5V AA battery
- Two step high-pass filter - flat or 80 Hz
- Rugged metal construction
- Low weight - 161 grams (5 ounces)
- Low handling noise
- Supplied with stand mount, zip pouch, and windshield
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance convertor with balanced transformer output |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 250Ω |
| Maximum SPL | 131dBSPL |
| Maximum Output Level | 6.9mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dBA |
| Power Options |
|
| Weight | 161.00g |
| Dimensions | 280.00mmH x 22.00mmW x 22.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
What's in the Box
|
NTG2 Multi-Powered Shotgun Microphone |
 |
RM5 Durable Microphone Clip |
 |
ZP2 Padded Zip Pouch (large) |
 |
WSVM Pop Filter/Wind Shield |
