ProMaster Deluxe Off-Camera TTL Cord for Canon
$ 49.95
The PROMASTER Deluxe TTL Off-Camera Remote Cord allows you to extend the dedicated operation of your TTL flash when using the flash off of the camera on a bracket or other accessory. Extended working distance - 59"/150cm (approx). Compatible with all Canon EOS System DSLRs
ProMaster Deluxe Off-Camera TTL Cord for Nikon
$ 49.95
ProMaster Deluxe Off Camera TTL Cord Nikon Flash Cord
The PROMASTER Deluxe TTL Off-Camera Remote Cord allows you to extend the dedicated operation of your TTL flash when using the flash off of the camera on a bracket or other accessory.
ProMaster Deluxe Off-Camera TTL Cord for Olympus
$ 49.95
Promaster 4225 Deluxe TTL Off-Camera
ProMaster Deluxe Off-Camera TTL Cord for Pentax
$ 29.95 - Vendido
ProMaster Deluxe Off-Camera TTL Cord for Pentax
ProMaster SKU: 6325 | Helix SKU: PR6325
Overview
The ProMaster Deluxe TTL Off-Camera Remote Cord allows you to extend the dedicated operation of your TTL flash when using the flash off of the camera on a bracket or other accessory.
ProMaster Deluxe Off-Camera TTL Cord for Sony
$ 49.95
ProMaster TTL FLASH CORD - SONY
ProMaster Deluxe Reflector & Socket - 11''
$ 49.00
ProMaster Deluxe Reflector - 11''
ProMaster Desktop Broadcast Stand
$ 39.95 - Vendido
ProMaster Desktop Broadcast Stand
ProMaster SKU: 2949 | Helix SKU: PR29494
Overview
Turn your desk, table, counter, or workbench into a broadcast studio!
The ProMaster Desktop Broadcast Stand clamps to the edge of a desk, table, or countertop surface up to 2" thick. It supports two accessories while reaching over and around your computer.
Use the Desktop Broadcast Stand to support two objects like a camera and a light, or a light and a mic, or ??? Position them at any angle you like using both ball heads. Raise and lower the main upright using its 3 sections with a range of 17 5/8" (min. height) to 41 3/4" (max. height). Then clamp-on the extension arm anyplace along the upright to hold a second accessory.
The ball head on the upright is removable, revealing a common 1/4"-20 bolt for an alternative mounting method. The ball head on the extension arm is permanently connected.
* Note: The clamping surface must have a minimum 2" overhang to properly support the Desktop Broadcast Stand, and it may be up to 2" thick.
Key Features:
- Clamps on surfaces up to 2" thick
- Adjustable Height
- Two ball heads for perfect positioning
Specifications
- Minimum height: 17 5/8" / 44.8 cm
- Maximum height: 41 3/4" / 106 cm
- Length of extension arm: 14 1/4" / 36.2 cm
Min and max height are measured from desktop to top of main ball head. Length of extension arm is measured from the upright to the end of the arm's ball head.
- Weight of entire unit: 22 3/8 oz / 634.4 g
- Weight of main post: 13 3/8 oz / 379.2 g
- Weight of extension arm: 6 3/4 oz / 191.4 g
- Weight of removable ball head: 2 1/4 oz / 63.8 g
- Max. load of main post: 3 lbs / 1.36 kg
- Max load of extension arm: 1 1/2 lbs / 0.68 kg
- Maximum thickness of clamping surface: 2" / 5 cm
Clamping surfaces may include a desktop, table top, countertop, workbench, and more.
Item Includes
ProMaster Diffuser for Canon 320EX Flash
$ 9.95
Flash Diffuser for the Canon 320EX Flash
ProMaster Diffuser for Canon EX580
$ 9.95
SLIP ON Dedicated Flash Diffuser for Canon 580EX A diffuser creates a softer, more even light from your electronic flash, giving your photos a more natural appearance. ProMaster Dedicated Flash Diffusers attach without the assistance of velcro or tape and are available to fit many popular shoe mount electronic flash units.
ProMaster Diffuser for Nikon SB700 Speedlite
$ 9.95
Promaster Diffuser for Nikon SB700 Speedlite A diffuser creates a softer, more even light from your electronic flash. PROMASTER Custom Fit Flash Diffusers attach without the assistance of velcro or tape. Slip On dedicated flash diffuser for the Nikon SB-700 Speedlite
ProMaster DIGIPOUCH S - PINK
$ 9.95
ProMaster DIGIPOUCH S - PINK
ProMaster Digital Elite Holster Bag
$ 34.95
ProMaster Digital Elite Holster Bag
ProMaster Digital Elite Micro Bag
$ 29.95
ProMaster Digital Elite Micro Bag
ProMaster Digital Elite Mini
$ 34.95
ProMaster Digital Elite Mini
ProMaster Digital Elite Pro Bag
$ 54.95
ProMaster Digital Elite Pro Bag
ProMaster Digital Exposure Gray Card (8x10 2-Pack)
$ 14.95
ProMaster Digital Exposure Gray Card (8x10 2-Pack)
ProMaster SKU: 8285 | Helix SKU: PR8285
Overview
Promaster Digital UV - 40.5MM
$ 39.95
The Digital UV filter absorbs the ultraviolet rays which often makes outdoor photographs hazy and indistinct. It is a multipurpose fine-weather filter for color as well as black and white photos and also serves as a permanent lens protector.
ProMaster DMW-BCF10 XtraPower Lithium Ion Replacement Battery for Panasonic
$ 17.78
PROMASTER batteries are a high quality, long lasting power source for your digital camera or camcorder. All PROMASTER replacement batteries are manufactured to meet or exceed the equipment manufacturer's specifications. 3.6V 950mAH Replaces Panasonic DMW-BCF10.
ProMaster DMW-BLF19 Li-ion Battery for Panasonic
$ 29.95
ProMaster DMW-BLF19 Li-ion Battery for Panasonic
ProMaster SKU: 7678 | Helix SKU: PR7678
Overview
ProMaster batteries are a high quality, long lasting power source for your digital camera or camcorder. ProMaster replacement batteries are manufactured to meet or exceed the equipment manufacturer's specifications.
Specifications
- 7.4 V
- 1900 mAh
ProMaster DMWBCJ13 XtraPower Lithium Ion Battery for Panasonic DMC-LX5K
$ 19.99
Promaster DMW-BJC13 (Panasonic) Battery
ProMaster Dovetail Macro Sliding Rail
$ 99.95
ProMaster Dovetail Macro Sliding Rail
Mfr SKU: 1802 | Helix SKU: PR18023
Overview:
The ProMaster Dovetail Macro Sliding Rail fits ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. The base of the rail attaches to a dovetail tripod head and can be slid back and forth for best positioning.
Two dovetail clamps are connected to the base rail. The lower clamp slides along the rail to adjust the position of your camera and lens. The upper clamp acts as a quick release receiver for your camera to quickly connect to the system. The upper clamp can be mounted in one of four positions, allowing your camera or lens to be mounted in a front-to-back or side-to-side motion.
Multiple scales are etched into the Macro Sliding Rail to aid in repeatable setups.
This kit also includes a ProMaster 70mm Quick Release Plate (1795) which incorporate two removable safety bolts to prevent it from accidentally sliding out of the clamp.
This system is excellent for macro photography in which small movements to the camera's distance relative to the subject can be used to change focus, composition, and reproduction ratio.
Features:
- Rail Dimensions: 41 mm high x 200 mm long x 73 mm wide.
- Rail Weight: 10 5/8 oz / 301 g
- Length of Travel: 6 3/8" / 162 mm
- QR Plate Dimensions: 70 mm long x 38 mm wide
- QR Plate Weight: 1 3/4 oz / 50 g
ProMaster Dovetail Nodal Slider - 100mm
$ 44.95
ProMaster Dovetail Nodal Slider - 100mm
Mfr SKU: 1774 | Helix SKU: PR17743
Overview:
ProMaster’s Nodal Sliders are compatible with ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products.
A Nodal Slider allows a lens to slide backward and forward on a tripod head, so that the lens’ nodal point (sometimes called the “no-parallax point”) can be perfectly centered over the head. Centering the nodal point means you can rotate the camera and lens on the head without an unnatural arc in the panning movement. This helps photographers create perfectly stitched panoramics, but this movement can also be very helpful in video work.
A Nodal Slider can also be used to change the mounting direction of a camera by 90 degrees. Some tripod heads, like most gimbal heads, only allow front-to-back mounting of the QR plate. When using an L-Bracket or a QR plate that’s mounted in a side-to-side direction, a Nodal Slider will allow you to attach the camera to the gimbal without adjusting the plate or L-Bracket.
Features:
- Integrated bubble level
- Strap slot
- Sliding 1/4"-20 mounting bolt
- Numerous 1/4"-20 mounting ports
- Scales for repeatable setups
Specifications:
- Dimensions: 129 mm long x 38 mm wide
- Weight: 3 7/8 oz / 110 grams
ProMaster Dovetail Nodal Slider - 140mm
$ 54.95 - Vendido
ProMaster Dovetail Nodal Slider - 140mm
Mfr SKU: 1781 | Helix SKU: PR17811
Overview:
ProMaster’s Nodal Sliders are compatible with ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products.
A Nodal Slider allows a lens to slide backward and forward on a tripod head, so that the lens’ nodal point (sometimes called the “no-parallax point”) can be perfectly centered over the head. Centering the nodal point means you can rotate the camera and lens on the head without an unnatural arc in the panning movement. This helps photographers create perfectly stitched panoramics, but this movement can also be very helpful in video work.
A Nodal Slider can also be used to change the mounting direction of a camera by 90 degrees. Some tripod heads, like most gimbal heads, only allow front-to-back mounting of the QR plate. When using an L-Bracket or a QR plate that’s mounted in a side-to-side direction, a Nodal Slider will allow you to attach the camera to the gimbal without adjusting the plate or L-Bracket.
Features:
- Integrated bubble level
- Strap slot
- Sliding 1/4"-20 mounting bolt
- Numerous 1/4"-20 mounting ports
- Scales for repeatable setups
Specifications:
-
Dimensions: 169 mm long x 38 mm wide
-
Weight: 4 11/16 oz / 133 g
ProMaster Dovetail QR Clamp Kit
$ 39.95
ProMaster Dovetail QR Clamp Kit
Mfr SKU: 1809 | Helix SKU: PR18092
Overview:
The ProMaster Dovetail QR Clamp Kit is a great way of adding an Arca-type quick release to a tripod, head, grip item, or other piece of equipment. It uses a 3/8"-16 threaded port and includes a 1/4"- 20 adapter. The clamp body also has three strap slots, so it can be used as a quick release system for a shoulder strap.
This kit includes a ProMaster 50mm Quick Release Plate (1816) which incorporate two removable safety bolts to prevent it from accidentally sliding out of the clamp.
Specifications:
- Clamp Dimensions: 18.5 mm high x 80.5 mm long (including QR knob) x 38 mm wide. (clamp is 14.5mm high w/o QR knob included in this dimension)
- Clamp Weight: 2 1/4 oz / 64 g
- QR Plate Dimensions: 50 mm long x 38 mm wide
- QR Plate Weight: 1 1/8 oz / 32 g
ProMaster Dovetail QR Plate - 50mm
$ 14.95
ProMaster Dovetail QR Plate - 50mm
ProMaster SKU: 1816 | Helix SKU: PR18160
Overview
This Dovetail Quick Release Plate is compatible with ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. It's a direct replacement for the QR plate included with the ProMaster Dovetail Clamp Kit (1809).
Its 50mm plate is considered a standard size. The plate has two removable safety bolts to prevent the plate from sliding out of a compatible receiver. Anti-twist soft pads on top of the plates help them to stay in place once mounted to your camera or lens.
A standard 1/4"-20 bolt is used to mount the plate to a camera or lens. The bolt is installed in the center of the plate, however, it can be moved to one of two slots on either side so you can customize the positioning of it for your particular camera or lens.
Specifications
- Dimensions: 50 mm long x 38 mm wide
- Weight: 1 1/8 oz / 32 g
- Mounting method: 1/4"-20 bolt
ProMaster Dovetail QR Plate - 70mm
$ 14.95
ProMaster Dovetail QR Plate - 70mm
Mfr SKU: 1795 | Helix SKU: PR17958
Overview:
This Dovetail Quick Release Plate is compatible with ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. It's a direct replacement for the QR plate included with the ProMaster Panning Clamp (1788) and the Macro Sliding Rail (1802).
This longer 70 mm plate allows for greater flexibility to position any camera or lens. The plate has two removable safety bolts to prevent the plate from sliding out of a compatible receiver. Anti-twist soft pads on top of the plates help them to stay in place once mounted to your camera or lens.
A standard 1/4"-20 bolt is used to mount the plate to a camera or lens. The bolt is installed in the center of the plate, however, it can be moved to one of two slots on either side so you can customize the positioning of it for your particular camera or lens.
Specifications:
- Dimensions: 70 mm long x 38 mm wide
- Weight: 1 3/4 oz / 50 g
- Mounting method: 1/4"-20 bolt
ProMaster DSS6000 Studio Slave Flash
$ 169.95
ProMaster DSS6000 Studio Slave Flash
ProMaster Dual Contour Strap
$ 19.95
ProMaster Dual Contour Strap
ProMaster Dual Sided Matte Paper - 8 1/2"x11" - 20 Sheets
$ 8.99
ProMaster Dual Sided Matte Paper - 8 1/2"x11" - 20 Sheets
ProMaster SKU: 1589 | Helix SKU: PR1589
Overview
ProMaster's Dual Sided Matte inkjet paper is specially designed to produce high resolution color images on both sides of the paper. It is the ideal choice for brochures, greeting cards, booklets, pamphlets, and much more. Use ProMaster PhotoImage Dual Sided Matte Inkjet paper for all of your print-on-demand needs.
Available in a handy 20 sheet pack of 8 1/2 x 11" paper.
Specifications
| Weight: | 160gsm |
| Thickness: | 8mil |
| Brightness: | 99% |
| Paper Finish: | Matte |
| Ink Compatibility: | Dye or Pigment |
ProMaster Duolight 250 Hybrid HDSLR Lighting System
$ 249.95
ProMaster Duolight 250 Hybrid HDSLR Lighting System
ProMaster DVD-R - 25 SPINDLE
$ 11.64
ProMaster DVD-R - 25 SPINDLE
ProMaster DYED BACKDROP 12'-GREEN
$ 89.00
ProMaster DYED BACKDROP 12'-GREEN
ProMaster DYED BACKDROP 12'-ORANGE
$ 89.00
ProMaster DYED BACKDROP 12'-ORANGE
ProMaster DYED BACKDROP 12'-PURPLE
$ 89.00
ProMaster DYED BACKDROP 12'-PURPLE
ProMaster DYED BACKDROP 12'-RED STORM
$ 89.00
ProMaster DYED BACKDROP 12'-RED STORM
ProMaster DYED BACKDROP 20'-GREEN
$ 129.95
ProMaster DYED BACKDROP 20'-GREEN
ProMaster DYED BACKDROP 20'-GREY STORM
$ 129.95
ProMaster DYED BACKDROP 20'-GREY STORM
ProMaster DYED BACKDROP 20'-LIGHT GREY
$ 129.95
ProMaster DYED BACKDROP 20'-LIGHT GREY
ProMaster DYED BACKDROP 20'-MORNING SUN
$ 129.95
ProMaster DYED BACKDROP 20'-MORNING SUN
ProMaster DYED BACKDROP 20'-ORANGE
$ 129.95
ProMaster DYED BACKDROP 20'-ORANGE
ProMaster DYED BACKDROP 20'-RED STORM
$ 129.95
ProMaster DYED BACKDROP 20'-RED STORM
PROMASTER E14-75W F/ 160A
$ 11.99
PROMASTER E14-75W F/ 160A Bulb
ProMaster Easy Fold Speedlight Soft Box - 16''
$ 69.95
ProMaster Easy Fold Speedlight Soft Box - 16''
ProMaster Easy Fold Speedlight Soft Box - 20''
$ 79.95
ProMaster Easy Fold Speedlight Soft Box - 20''
ProMaster Easy Fold Speedlight Soft Box - 24''
$ 99.95
ProMaster Easy Fold Speedlight Soft Box - 24''
ProMaster SKU: 9160 | Helix SKU: PR9160
Overview
The ProMaster Easy Fold Speedlight Soft Box allows you to use your camera mounted flash to produce a soft, diffused, natural light for pleasing photos of both people and objects. The soft box folds compact and includes a carry bag for convenient storage and transport. This easy fold kit comes with the soft box and all the mounting gear you need to attach your flash.
Specifications
Includes:
- 24 x 24'' Soft Box
- Fully adjustable mounting bracket
- Storage Case
CA Residents: Prop 65 WARNING(S)
ProMaster Egg Crate Grid for 24"x36" Softbox
$ 29.95 - Vendido
ProMaster Egg Crate Grid for 24"x36" Softbox
ProMaster SKU: 9493 | Helix SKU: PR9493
