Kupo Camera Hex Stud, 3/8-Inch-16 M, KG002512
$ 6.39
Kupo Camera Hex Stud, 3/8-Inch-16 M, KG002512
Kupo Camera/Umbrella Bracket, KG006411
$ 15.95
The KG006411 Camera / Umbrella Bracket is a handy accessory. It features two baby 5/8 (16 mm) receivers and a smaller receiver for an umbrella shaft. The KG006411 comes with a 1/4-20 camera mounting screw and a locking collar to tighten the camera against the bracket. This bracket will allow you to mount your camera on virtually any piece of grip equipment. The KG006411 is clad in a stealthy black finish.
Kupo Convi Clamp - Silver, KG701212
$ 27.95
Kupo Convi Clamp - Silver, KG701212
Kupo Convi Clamp Saddle KG703411
$ 3.19
This Convi Clamp accessory is a durable triangular plastic wedge that presses into the jaw of any Convi Clamp to enable the clamp to be mounted securely on flat surfaces.
Kupo Convi Clamp with Adjustable Handle
$ 27.95
Kupo Convi Clamp with Adjustable Handle
Kupo Convi Clamp with Adjustable Handle - Silver, KG701712
$ 28.95
Kupo Convi Clamp with Adjustable Handle - Silver, KG701712
Kupo Convi Clamp with Hex Stud - Black KG701611
$ 30.95 - Vendido
Kupo Convi Clamp with Hex Stud - Black KG701611
Kupo Double Ball Joint Adapter with Dual 5/8 Inches (16mm) Studs
$ 39.95
Kupo Double Ball Joint Adapter with Dual 5/8 Inches (16mm) Studs
Kupo Double Ball Joint Adapter with Dual 5/8 Inches (16mm) Studs with Camera ...
$ 52.95
Kupo Double Ball Joint Adapter with Dual 5/8 Inches (16mm) Studs with Camera ...
Kupo Double Convi Clamp - Silver, KG702512
$ 53.95
Kupo Double Convi Clamp - Silver, KG702512
Kupo Double Sided Hex Joining Stud KG006812
$ 8.49
This Convi Clamp accessory is a solid steel short stud with two opposing hex studs for joining two Convi Clamps back to back.
Kupo Double Sided Joining Stud, 90/45 Degree Offset KG006912
$ 8.49
This Convi Clamp accessory is made from solid steel and features two opposing hex studs with the flat surfaces in 45 degree increments so that two Convi Clamps can be joined back to back at right or repeatable angles.
Kupo Double Suction Cup
$ 117.00
Kupo Double Suction Cup
Kupo SKU: KG087511 | Helix SKU: KUKG087511
Overview
Kupo’s new range of pumping suction cups offers a temporary solid light mounting solution on smooth, nonporous surfaces. Each Kupo Suction Cup comes with 5/8" baby pin; 3/8" thread bolt or 3/8" thread socket. This permits mounting small lights; cameras and accessories to indows, mirrors, automobiles, boats and any other smooth, nonporous surfaces. Because of the excellent rubber material with silicon, Kupo Suction Cups can be used at temperatures from -12°- 49° C/10.4°- 120°F. A red-line indicator is equipped in most suction cups warning of any vacuum loss due to adverse shooting conditions.
Double suction cups equipped with rugged die-casting camera platform which comes with industrial standard 1/4" -20 mounting screw allows all motorsport enthusiasts to quickly and easily create videos or photography. Adjustable knobs are designed enable to tilt the camera platform without space limited.
| Weight | 2.5 KG (5.5 lbs) |
|---|---|
| Maximum Load | 15 KG (33.1 lbs) |
Kupo Double Suction Cup with 5/8" Stud KG084111
$ 113.00 - Vendido
Kupo Double Suction Cup with 5/8" Stud KG084111
Kupo EZ Grip Finger with Baby 5/8 Inches (16mm) Stud & Receiver KG300612
$ 44.95
This adapter consists of a 5/8" (16mm) Stud on one side and a 5/8" (16mm Receiver) on the other connected by a large ball joint. The baby receiver has a metal knob to lock it securely in place.
Kupo EZ-TIE Deluxe Cable Ties
$ 13.95
Kupo EZ-TIE Deluxe Cable Ties
Kupo EZ-TIE Deluxe Cable Ties 0.78 x 16.1 Inches (2 X 41cm) - Blue (10 Pack) ...
$ 13.95
Kupo EZ-TIE Deluxe Cable Ties 0.78 x 16.1 Inches (2 X 41cm) - Blue (10 Pack) ...
Kupo EZ-TIE Deluxe Cable Ties 0.78 x 16.1 Inches (2 X 41cm) - Red (10 Pack) K...
$ 13.95
Kupo EZ-TIE Deluxe Cable Ties 0.78 x 16.1 Inches (2 X 41cm) - Red (10 Pack) K...
Kupo EZ-TIE Deluxe Cable Ties 0.78 x 16.1 Inches (2 X 41cm) - White (10 Pack)...
$ 13.95
Kupo EZ-TIE Deluxe Cable Ties 0.78 x 16.1 Inches (2 X 41cm) - White (10 Pack)...
Kupo EZ-TIE Deluxe Cable Ties 0.78 x 16.1 Inches (2 X 41cm) - Yellow (10 Pack...
$ 13.95
Kupo EZ-TIE Deluxe Cable Ties 0.78 x 16.1 Inches (2 X 41cm) - Yellow (10 Pack...
Kupo EZ-TIE Simple Cable Ties 0.78 x 7.87 Inches (2 x 20cm) - Black (50 Pack)...
$ 36.95
Kupo EZ-TIE Simple Cable Ties 0.78 x 7.87 Inches (2 x 20cm) - Black (50 Pack)...
Kupo EZ-TIE Simple Cable Ties 0.78 x 7.87 Inches (2 x 20cm) - Blue (50 Pack) ...
$ 36.95
Kupo EZ-TIE Simple Cable Ties 0.78 x 7.87 Inches (2 x 20cm) - Blue (50 Pack) ...
Kupo EZ-TIE Simple Cable Ties 0.78 x 7.87 Inches (2 x 20cm) - Red (50 Pack) K...
$ 36.95
Kupo EZ-TIE Simple Cable Ties 0.78 x 7.87 Inches (2 x 20cm) - Red (50 Pack) K...
Kupo EZ-TIE Simple Cable Ties 0.78 x 7.87 Inches (2 x 20cm) - White (50 Pack)...
$ 36.95
Kupo EZ-TIE Simple Cable Ties 0.78 x 7.87 Inches (2 x 20cm) - White (50 Pack)...
Kupo EZ-TIE Simple Cable Ties 0.78 x 7.87 Inches (2 x 20cm) - Yellow (50 Pack...
$ 36.95
Kupo EZ-TIE Simple Cable Ties 0.78 x 7.87 Inches (2 x 20cm) - Yellow (50 Pack...
Kupo Foamcore Fork with Baby, 5/8 Inches (16mm) Stud KG600611
$ 24.95
The Foam Core Fork stabs into the foam center and then the stud is placed in a grip arm or any other 5/8" baby receiver to be positioned anywhere as a reflector to bounce light or flag to block it.
Kupo Folding Base Mini Stand, KS040111
$ 54.95
The Folding Base Mini Stand is a combination of the Kupo Fold Away Backlite Stand (KS040111) and the Kupo Folding Mini Stand Pole, an adjustable 2 riser, 1 section aluminum pole for variable height adjustment from 22.4 - 33.5 in (57 - 85 cm). This combination makes one of the most versatile stands to hide background light behind the subject being photographed.
Kupo Gaffer Tape 1.9 Inches x 164 Feet (48mm x 50m) , Black Matte KG084211
$ 16.00
Gaffer Tape, named after the head of a cine lighting department, is a strong cloth based tape that adheres strongly to surfaces but can also be removed cleanly due to its synthetic adhesive.
Kupo Grip Arm Support, KG200912
$ 84.95
Generally when you extend a large accessory such a flag or light fixture laterally past the center column of a C stand, the increased leverage may be too much for the grip head to bear. In the old days you could rectify this situation using another C stand as an additional support, or a combination of clamps, grip heads and grip arms.Today Kupo has developed an innovative solution that rapidly mounts between both the riser section of a Master C Stand with help of either a Kupo 3 or 4 Way Clamp, and to a grip arm with the help of the included Kupo Tiny clamp already mounted on the other side of the Grip Arm Support. The Grip Arm Support has a built in ball joint that rotates 360 degrees for infinite flexibility and extends from 22 -30.7 (56 -78cm). With the addition of the Grip Arm Support, the load capacity at the end of your grip arm is greatly increased.
Kupo Grip Head with Hex Stud KG202011
$ 35.95
The 2-1/2 Grip Head, KG200912 consists of a pair of rotating aluminum discs attached to a hexagonal stud designed for the Convi and Super Viser Clamp systems. The discs have four different sized V shaped jaws to accept any accessory with a 5/8, 1/2, 3/8, 1/4 mounting stud or tubing. The V shaped jaws have teeth that grab whatever is mounted between the plates securely. The KG200912 uses a non-slip aluminum friction disc that will maintain its durability over time that offers the user positive locking strength and precise control. The 2 1/2 Grip Head is most often used in conjunction with a grip arm, giving you complete flexibility to position gobos go betweens such as flags, scrims and silks as well as other accessories virtually anywhere. This grip head is clad in a stealthy black powder coated finish.
Kupo Handy Stand, KS041011
$ 60.95
The Handy Stand is the perfect travel companion. It's extremely lightweight, only 2.4 lbs (1.1 Kg) and folds down to a space saving 19.2, yet opens to a respectable maximum height of 89.3 (2.27 m), ideal to fit in any standard size suitcase for travel and a natural choice for building a compact travel lighting kit with small lighting fixtures.
Kupo Hex Baby Offset Arm - 8.4 Inches (215mm) KG000412
$ 38.95
This Convi Clamp accessory consists of an 8.5" (21.5 cm) extendable arm with two opposing baby (5/8" - 16mm) pins for mounting light fixtures or any other baby accessory with a baby receiver.
Kupo Hex Stud 3/8-Inch-16 M & 1/4-Inch
$ 7.49
Kupo Hex Stud 3/8-Inch-16 M & 1/4-Inch
Kupo Hex Stud with 3/8 Inches-16F and 1/4 Inches-20F KG001012
$ 6.39
Kupo Hex Stud with 3/8 Inches-16F and 1/4 Inches-20F KG001012
Kupo High Baby Stand, KS101112
$ 232.95
What's the first thing you think about when you hear the word steel? Strength of course! This is our first offering from Kupo's range of steel light stands. As with all of Kupo's stands, they continue with their passionate pursuit of uncompromising quality. The High Baby Stand reaches towards the sky with a maximum height of 13.78' (4.20 m). Due to its solid steel construction, the High Baby Stand has the maximum load capacity of 55.1 lbs (25 Kg). The KS101112 features a leveling leg that enables the user to extend one leg more than the others to level out the stand on an incline or uneven terrain. It also comes in handy on some stairs!
Kupo High Overhead Roller Stand, KS600212
$ 440.95
The High Overhead Stand takes you to altitudes just shy of 20'! Designed primarily to support overhead frames, also known as butterfly frames, this giant is ready to meet your support needs skyward. Each riser is spring cushioned as a safety feature to protect lighting fixtures from a sudden drop if the locking collar becomes loose. The solid steel construction has a maximum load capacity of 88.2 lbs (40 Kg) and is equipped with braked casters to easily reposition heavy loads. Each caster is equipped with a peg that extends past the wheel allowing it to stand upright when collapsed. The High Overhead Stand also features a true combination head with a 4 1/2 grip head, also known as a lollipop and a junior 1-1/8 (28mm) receiver to accept any kind of mounting challenge.
Kupo High Roller Stand, KS300112
$ 330.95
The High Roller Stand takes you higher and takes you mobile! Whether you are mounting a 10K Fresnel 14' (4.28m) in the air or you are flying a 20 x 20' (6.09 x 6.09m) Butterfly frame, this stand is ready to meet your needs. Each riser is spring cushioned as a safety feature to protect lighting fixtures from a sudden drop if the locking collar becomes loose. The solid steel construction has a maximum load capacity of 88.2 lbs (40 Kg) and is equipped with braked casters to easily reposition heavy loads. Each caster is equipped with a peg that extends past the wheel allowing it to stand upright when collapsed. The High Roller Stand also features the triple function universal combo head with both 1-1/8 (28mm) and 5/8 (16mm) receivers plus a multi-direction 5/8 (16mm) stud to accept any kind of mounting challenge.
Kupo Hot Shoe Adapter KG006711
$ 9.59
The Kupo Hot Shoe Adapter is an all-metal micro clamp designed specifically for off-camera flashes. It comes equipped with a variable tension knob that locks securely around any flashes "foot" for a snug fit. The bottom of the adapter is tapped with a 1/4"-20 thread for easy mounting.
Kupo Junior 1-1/8 Inches (28mm)
$ 60.95
Kupo Junior 1-1/8 Inches (28mm)
Kupo Junior 1-1/8-Inch (28mm) Side Arm KG809812
$ 87.95
Kupo Junior 1-1/8-Inch (28mm) Side Arm KG809812
Kupo Junior 3-Inch Wall Plate, Junior 1-1/8-Inch(28mm) Receiver, KG003712
$ 27.95
The Kupo Junior 4 Wall Plate allows you to mount a 1-1/8 (28mm) receiver anywhere on a wall, other flat surface or just about anywhere. This plate gives you the option of mounting it by using screws or nails through any of the 8 anchor points pre-drilled into the plate. Attached to a wood or metal base, they make great free-standing floor mounts, also known as pigeon plates, or can be positioned almost anywhere when clamped between the discs of a grip head. The KG003712 comes with a metal locking knob and is clad in a chrome plated steel finish.
Kupo Junior Roller Stand KS300712
$ 220.95
The Junior Roller Stand is a great lightweight alternative to a full-sized roller stand to get your lights mobile in the studio or location. It is the perfect compliment to a boom set-up.
Kupo KD103112 Kupole Rubber Top Pad (White/Black)
$ 7.49
This is a replacement top pad for the silver Kupoles.
Kupo KD103212 Kupole Rubber Bottom Pad (White/Black)
$ 7.49
This is a replacement bottom pad for the silver Kupoles.
Kupo KG007412 1/4-Inch-20M to 1/4-Inch-20M Thread Adapter
$ 3.69 - Vendido
Kupo KG007412 1/4"-20M to 1/4"-20M Thread Adapter 1/4"-20M to 1/4"-20M Thread Adapter KG007412 1/4"-20M to 1/4"-20M Thread Adapter
