Rode M2 Handheld Condenser Microphone
$ 179.00 - Épuisé
Rode M2 Handheld Condenser Microphone
Rode SKU: M2 | Helix SKU: RMM2
Overview
The RØDE M2 is a rugged live-performance condenser microphone designed to provide a full frequency response and premium performance on stage. Combining sound quality equal to that of the finest studio microphones, the M2 live performance handheld condenser microphone benefits from RØDE’s extensive experience. With features such as integrated shock mounting to reduce handling noise and a tailored response to reduce feedback, the M2 is a sturdy and versatile addition to your live microphone kit.
Featuring a tailored-for-stage super-cardioid polar pattern and an internally shock mounted 1/2" condenser capsule, the M2 provides a high quality alternative to dynamic microphones for live performance. The addition of an on/off switch adds versatility for artists that prefer greater control over their sound, while a lock ensures that the microphone cannot be accidentally switched.
The RØDE M2 live condenser microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
- Live condenser vocal microphone
- Feedback rejecting super-cardioid pick up pattern
- Locking on/off switch
- Heavy duty metal body
- High level of RF rejection
- Low handling noise
- RM1 stand mount and ZP1 zip pouch included
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 35Hz - 20kHz |
| Output Impedance | 50Ω |
| Maximum SPL | 141dBSPL |
| Maximum Output Level | 5.2mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -44.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 23dBA |
| Power Options |
 
|
| Weight | 308.00g |
| Dimensions | 187.00mmH x 47.00mmW x 47.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 10 years following registration |
RODE M3 Multi-Powered Cardioid Condenser Microphone
$ 149.00 - Épuisé
RODE M3 Multi-Powered Cardioid Condenser Microphone
Rode SKU: M3 | Helix SKU: RMM3
Overview
Studio and location multi-powered cardioid condenser microphone with switchable HPF and PAD.
- Heavy duty metal body
- Internal capsule shock mount
- High level of RF rejection
- On-mic selectable high pass filter @ 80Hz-12dB/Oct (-10 and -20dB PAD)
- Heat-treated high-strength mesh head
- Battery status indicator
- 9V Battery Power and 24 - 48V phantom power
- Includes wind shield, mic clip and zip pouch
- 10 year extended warranty when you register your microphone
The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.
Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery.
A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise.
The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz(selected HPF @80Hz) |
| Output Impedance | 200Ω |
| Maximum SPL | 142dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 9.2mV |
| Sensitivity | -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 21dB-A |
| Weight | 390.00gm |
|
Dimensions |
225.00mmH x 33.00mmW x 33.00mmD |
| Warranty |
1 year with free extension to 10 years following registration |
RODE M5 Compact 1/2" Condenser Microphone (Matched Pair)
$ 199.00 - Épuisé
RODE M5 Compact 1/2" Condenser Microphone (Matched Pair)
Rode SKU: M5-MP | Helix SKU: RMM5MP
Overview
Matched pair of compact 1/2" cardioid condenser microphones. Includes 2 x RM5 mic clips and 2 x WS5 windshields
- 1⁄2” capsule with gold-plated membrane
- Cardioid polar pattern
- All metal body
- Ultra-low noise
- State-of-the-art surface mount electronics
- Includes microphone clips and windshields
- 10 year extended warranty when you register your microphone
Designed and made in Australia, the M5 is a compact ½” cardioid condenser microphone with low noise and a full frequency response. A result of many years’ experience building the award-winning NT5 microphone, RØDE has succeeded in making a high-quality ‘pencil’ style permanently polarized condenser that will impress even the most demanding of artists and engineers. Ideal for studio recording and live on stage, the M5 is equally at home on a range of acoustic instruments, choirs, or anywhere you would employ a small diaphragm condenser microphone, either individually or as a stereo array. This matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones. A premium foiled certificate is supplied to verify the authenticity of the pair. The M5 is finished with RØDE’s proprietary ceramic coating which offers a sleek matt black finish, and is supplied with WS5 windshields and RM5 stand mounts.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 13.5mV |
| Sensitivity | -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 19dB-A |
| Power Options |
|
| Weight | 80.00gm |
| Dimensions | 100.00mmH x 20.00mmW x 20.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE NT4 - Cardioid Studio Condenser X/Y Stereo Microphone
$ 529.00 - Épuisé
RODE NT4 - Cardioid Studio Condenser X/Y Stereo Microphone
Rode SKU: NT4 | Helix SKU: RMNT4
Overview
Fixed X/Y stereo 1/2" condenser microphone with 3.5mm minijack and dual XLR connectivity. P48 and 9V battery powered.
- Stereo X/Y condenser microphone
- Dual externally biased 1/2” capsules with gold sputtered diaphragm
- Capsules closely matched with full frequency response
- Dual power operation
- Custom stereo cables included - 5 pin stereo XLR, Minijack (Via included cable) and dual 3-pin XLR (via included cable)
- Custom twin head windshield (WS4) included
- Includes custom twin head windshield WS4, RC4 case and 5-pin Minijack and XLR stereo cables
- Surface mount circuitry
- 10 year extended warranty when you register your microphone
The RØDE NT4 stereo microphone offers a perfect X/Y stereo array without the need for matched pair microphones, complex stereo bars and equipment. Simply place the microphone and capture a realistic stereo field using a single microphone.
Combining an acoustically matched pair of 1/2” cardioid condenser capsules fixed in a perfect 90 degree near-coincident alignment, the NT4 instantly creates a faithful stereo array that is ideal for drum overheads, percussion, choir vocals, environmental recording and sound design in a studio or in the field.
The NT4's versatility is further extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm minijack cables are supplied to ensure the NT4 is ready to record to mixing console, portable recorder or camera.
The RØDE NT4 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |
|
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 13.9mV |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 16dB-A |
| Power Options |
9V battery powered
|
| Weight | 480.00gm |
| Dimensions | 231.00mmH x 61.00mmW x 33.00mmD |
| Output |
|
| Warranty | 1 year with free extension to 10 years following registration |
RODE NT5 Cardioid Studio Condenser Microphones (Single Microphone)
$ 219.00 - Épuisé
RODE NT5 Cardioid Studio Condenser Microphones (Single Microphone)
Rode SKU: NT5 | Helix SKU: RMNT5
Overview
Compact 1/2" cardioid condenser microphone.
- Externally biased condenser
- Gold sputtered 1/2” capsule
- Heavy-duty satin-nickel plated body
- Dual power operation
- Surface mount circuitry
- Low noise
- Full frequency response
- Available as Certified Match Pair
- 10 year extended warranty when you register your microphone
The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.
Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.
Expanding the NT5's versatility, an interchangeable omnidirectional capsule (NT45-O) is available.
Finished in durable satin nickel, the NT5 available as a single microphone or as an acoustically matched pair.
The NT5 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 100Ω |
| Maximum SPL | 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 13.9mV |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 16dB-A |
| Power Options |
+24V phantom power required from mixer or interface
|
| Weight | 101.00gm |
| Dimensions | 118.00mmH x 20.00mmW x 20.00mmD |
| Output | |
| Warranty |
1 year with free extension to 10 years following registration |
RODE NT55 Compact Condenser Microphone (Matched Pair)
$ 829.00 - Épuisé
RODE NT55 Compact Condenser Microphone (Matched Pair)
Rode SKU: NT55 Matched Pair | Helix SKU: RMNT55MatchedPair
Overview
Pair of acoustically matched NT55 1/2" cardioid condenser microphones.
The Rode NT55 is a matched pair of compact condenser microphones designed to accurately reproduce vocals and general instruments in recording and sound reinforcement applications. The NT55 features a 3-position pad switch for added headroom while capturing loud, peaking audio signal. A 3-position low-cut filter switch eliminates low frequency noise. The NT55 is a great choice for vocals, guitar, drums, cabinets and more. The NT55 includes interchangeable omnidirectional and cardioid capsules for even further flexibility.
Interchangeable Capsules
Omnidirectional and cardioid capsules are included for added flexibility.
3-Position Pad Switch
0, -10 and -20 dB pad switch enhances headroom and minimizes distortion.
3-Position Low Frequency Roll Off
Flat, 75 Hz and 150 Hz roll-off filter switch minimizes low frequency noise.
Specifications
| Operating Principle | Pressure Gradient |
| Transducer | Condenser |
| Diaphragm | 0.5" (12.70 mm) |
| Polar Pattern | Cardioid, Omnidirectional |
| Frequency Range | 20 Hz to 20 kHz |
| Signal to Noise Ratio | 79 dB |
| Equivalent Noise Level | 15 dB A-Weighted |
| Maximum SPL | 136 dB SPL 1% |
| Impedance | 100 ohms |
| Sensitivity | -38 dB, re: 1 V/Pa |
| Power Requirements | 48 V |
| Output Connectors | 3-Pin XLR |
| Dynamic Range | 121 dB |
| Length | 5.71" (145 mm) |
| Diameter | 0.79" (20 mm) |
| Weight | 0.22 lb (100 g) |
Packaging Info
Package Weight 3.5 lb
Box Dimensions (LxWxH) 14.5 x 12.0 x 4.5"
RODE NT55 Compact Condenser Microphone (Single Microphone)
$ 369.00 - Épuisé
RODE NT55 Compact Condenser Microphone (Single Microphone)
Rode SKU: NT55 | Helix SKU: RMNT55
Overview
Compact 1/2" cardioid and omni condenser microphone.
- Externally biased condenser
- Cardioid or Omni polar pattern using included interchangable capsules
- Gold sputtered 1/2” capsule
- Three position PAD - 0dB, -10dB and -20dB
- Three position High-Pass Filter - flat, 75Hz and 150Hz
- Surface mount circuitry
- Low noise
- Available as Certified Matched Pair
- 10 year extended warranty when you register your microphone
Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.
Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.
Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair.
The NT55 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |
|
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 100Ω |
| Maximum SPL | 136dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 8.0mV |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 15dB-A |
| Power Options | |
| Weight | 110.00gm |
| Dimensions | 145.00mmH x 20.00mmW x 20.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE NT6 Compact Condenser Microphone
$ 429.00 - Épuisé
RODE NT6 Compact Condenser Microphone
Rode SKU: NT6 | Helix SKU: RMNT6
Overview
Compact 1/2" condenser microphone with 3m (10') Kevlar® reinforced cable to detachable capsule head. Also features HPF and PAD.
- 1/2” condenser capsule with remote preamp
- Gold sputtered externally biased condenser
- Two position PAD - 0dB and -10dB
- Two position High Pass Filter - flat and 80Hz
- Includes two-axis swivel mount, 3m Kevlar® fibre reinforced cable, windshield and zip pouch
- Heavy duty satin-nickel plated body
- Low noise and full frequency response
- Designed and manufactured in Australia
- 10 year extended warranty when you register your microphone
The RØDE NT6 is an extremely compact 1/2" cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required.
Although clearly relevant to instrument miking, the NT6 is extremely well suited to any situation where an unobtrusive but powerful microphone is required such as location recording.
The microphone is split into two modular components, joined by via a custom 3m (10') shielded, Kevlar® reinforced cable.
Featuring a gold-sputtered, true-condenser capsule, the NT6 capsule head measures 45mm (1.8”) in length and weighs only 42gm (1.5oz). The included all-metal, multi-position mounting ring provides 180 degrees of vertical rotation.
The NT6 preamp-body incorporates both a high-pass filter and pad setting. The high-pass filter can be introduced to cut vibration, rumble and undesired sounds sources under 80Hz, while the PAD offers a -10dB level attenuation, useful when recording louder sound sources.
The NT6's small form factor make it an ideal small diaphragm cardioid microphone for use in the Mid-Side (M/S) stereo array, in combination with a figure-8 large diaphragm microphone such as the NT2-A, NT2000 or K2.
The NT6 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 135dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 6.0mV |
| Sensitivity | -37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 19dB-A |
| Power Options |
|
| Weight | 386.00gm |
| Dimensions | 189.00mmH x 64.00mmW x 20.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE NTK Valve 1.0" Condenser Microphone
$ 529.00 - Épuisé
RODE NTK Valve 1.0" Condenser Microphone
Rode SKU: NTK | Helix SKU: RMNTK
Overview
Versatile class A valve 1" cardioid condenser microphone
- Large 1” capsule with gold plated diaphragm
- Class “A” valve circuitry
- Hand selected and graded 6922 twin-triode valve
- Dedicated power supply
- Internal capsule shock mounting
- High level of RF rejection
- Ultra low noise
- Wide dynamic range
- High strength heat treated steel mesh head
- 10 year extended warranty when you register your microphone
Like it’s bigger brother the K2, the RØDE NTK is a premium valve condenser microphone designed to provide incredible detail and warmth in the studio. Its cardioid polar pattern is perfect for most single instrument recording scenarios.
The electronic circuitry complementing this very sensitive transducer includes a hand-selected twin-triode 6922 valve and audiophile grade components. The result is an ultra-wide dynamic range, low noise, and stunning tube warmth. The NTK's rich valve sound is ideal for vocals, acoustic instruments, drum overheads, guitar amps and pianos.
The RØDE NTK microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | Valve/tube impedance converter with bipolar output buffer |
| Capsule | 1.00" |
| Polar Pattern |
Cardioid - Picks up audio from the front and sides and rejects from the rear
|
| Address Type | Side |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 158dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 29.0mV |
| Sensitivity | -38.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 12dB-A |
| Power Options |  |
| Weight | 760.00gm |
| Dimensions | 208.00mmH x 55.00mmW x 55.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RØDE HS2 Headset Microphone, Black Color, Large Size
$ 449.00 - Épuisé
RØDE HS2 Headset Microphone, Black Color, Large Size
RØDE SKU: HS2-BL | Helix SKU: RMHS2BL
Overview
The RØDE HS2 is a low profile, ergonomic and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
The result of an extensive and complete redesign process, the RØDE HS2 features an adjustable corrosion resistant stainless spring-steel boom arm and headband connected to pliable hypoallergenic silicone ear strips for maximum flexibility and user comfort.
Coated in a durable ceramic painted finish in either black (HS2-B) or pink (HS2-P) the HS2 is also available in two different sizes (small or large) to ensure the perfect fit and function for any individual.
The headset is connected via a 1.2m (4') braid shielded, Kevlar® reinforced cable, terminating at a gold plated 3.5mm TRS output with a removable locking nut to ensure a secure connection to a wide range of recording devices and wireless transmitters, including the RØDE Filmmaker and Newsshooter kits.
The HS2's light weight, comfortable fit, low self-noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
- Updated low-profile ergonomic design
- Ultra-Lightweight construction for complete comfort
- Adjustable corrosion resistant stainless spring steel boom arm and headband
- Flexible hypoallergenic sillicone ear strips
- Durable ceramic painted finish available in black or pink
- Available in small or large sizes
- Omni-directional polar pattern
- Low handling noise
- Includes Mini-furry and pop filter / windshield
- 1.2m Kevlar reinforced braid shielded cable
- Gold plated 3.5mm TRS output with removable locking nut
- Five year extended warranty when you register your microphone
What's In The Box
HS2 Lightweight headset microphone
Pop Filter (black)
Cable Management clip
Mini Furry
Specifications
| Acoustic Principle | Permanently Polarised Condenser |
| Active Electronics | JFET impedance converter |
| Address Type | Omni |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3000Ω |
| Maximum SPL | 122dBSPL |
| Maximum Output Level | 189.0mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -47.2dB re 1 Volt/Pascal (4.70mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 36dBA |
| Weight | 20g |
| Dimensions | 50mmH x 124mmW x 205mmD |
| Warranty | 1 year with free extension to 5 years following registration |
RØDE HS2 Headset Microphone, Pink Color, Large Size
$ 449.00 - Épuisé
RØDE HS2 Headset Microphone, Pink Color, Large Size
RØDE SKU: HS2-PL | Helix SKU: RMHS2PL
Overview
The RØDE HS2 is a low profile, ergonomic and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.
The result of an extensive and complete redesign process, the RØDE HS2 features an adjustable corrosion resistant stainless spring-steel boom arm and headband connected to pliable hypoallergenic silicone ear strips for maximum flexibility and user comfort.
Coated in a durable ceramic painted finish in either black (HS2-B) or pink (HS2-P) the HS2 is also available in two different sizes (small or large) to ensure the perfect fit and function for any individual.
The headset is connected via a 1.2m (4') braid shielded, Kevlar® reinforced cable, terminating at a gold plated 3.5mm TRS output with a removable locking nut to ensure a secure connection to a wide range of recording devices and wireless transmitters, including the RØDE Filmmaker and Newsshooter kits.
The HS2's light weight, comfortable fit, low self-noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.
- Updated low-profile ergonomic design
- Ultra-Lightweight construction for complete comfort
- Adjustable corrosion resistant stainless spring steel boom arm and headband
- Flexible hypoallergenic sillicone ear strips
- Durable ceramic painted finish available in black or pink
- Available in small or large sizes
- Omni-directional polar pattern
- Low handling noise
- Includes Mini-furry and pop filter / windshield
- 1.2m Kevlar reinforced braid shielded cable
- Gold plated 3.5mm TRS output with removable locking nut
- Five year extended warranty when you register your microphone
What's In The Box
HS2 Lightweight headset microphone
Pop Filter (black)
Cable Management clip
Mini Furry
Specifications
| Acoustic Principle | Permanently Polarised Condenser |
| Active Electronics | JFET impedance converter |
| Address Type | Omni |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3000Ω |
| Maximum SPL | 122dBSPL |
| Maximum Output Level | 189.0mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -47.2dB re 1 Volt/Pascal (4.70mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 36dBA |
| Weight | 20g |
| Dimensions | 50mmH x 124mmW x 205mmD |
| Warranty | 1 year with free extension to 5 years following registration |
RØDE K2 - Variable Pattern Studio Tube Condenser Microphone
$ 699.00
RØDE K2 - Variable Pattern Studio Tube Condenser Microphone
RØDE SKU: K2 | Helix SKU: RMK2
Overview
Seamlessly variable dual 1" condenser valve microphone featuring continually variable polar pattern (omni through cardioid to figure 8).
- Large 1" capsule with gold sputtered diaphragm and internal shock mounting
- Ultra low noise
- Wide dynamic range
- Class ‘A’ valve circuitry
- Hand-selected and graded 6922 twin-triode valve
- Dedicated Power Supply
- High strength welded and heat-treated steel mesh head
- Continuously variable polar patterns. From omni, through cardioid to figure 8, controlled at the power supply.
- 10 year extended warranty when you register your microphone
The RØDE K2 is a premium valve condenser microphone featuring dual 1” gold sputtered diaphragms. Infinitely variable control of the polar pattern from omnidirectional through cardioid and bidirectional/figure-8 provides the freedom and flexibility to excel in any recording situation.
High-performance specifications (including a maximum SPL of 162dB) are combined with the character and subtleties of the legendary mics of the 1950s to provide a microphone that not only provides world-class vocals but is perfectly at home recording a wide range of instruments both up-close or in a wider ‘room’ capacity.
The RØDE K2 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | Valve/tube impedance converter with bipolar output buffer |
| Capsule | 1.00" |
| Polar Pattern |
|
| Address Type | Side |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 162dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 30.0mV |
| Sensitivity | -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 10dB-A |
| Power Options | |
| Weight | 815.00gm |
| Dimensions | 208.00mmH x 55.00mmW x 55.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RØDE NTG2 Condenser Shotgun Microphone
$ 269.00
RØDE NTG2 Condenser Shotgun Microphone
Rode SKU: NTG2 | Helix SKU: RMNTG2
Overview
The RØDE NTG2 is a new, lightweight condenser shotgun microphone, designed for professional applications within the film, video, television, and production industries. The NTG2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V phantom power. A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the NTG2 the perfect choice for film, video engineering, and voice-over work. The NTG2 is extremely lightweight making it ideal for mounting directly to video cameras or on boom poles.
The NTG2 comes complete with zip pouch, stand mount, and windshield. The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions.
- Broadcast sound quality
- Low noise circuitry
- 48V phantom power or 1.5V AA battery
- Two step high-pass filter - flat or 80 Hz
- Rugged metal construction
- Low weight - 161 grams (5 ounces)
- Low handling noise
- Supplied with stand mount, zip pouch, and windshield
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance convertor with balanced transformer output |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 250Ω |
| Maximum SPL | 131dBSPL |
| Maximum Output Level | 6.9mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dBA |
| Power Options |
|
| Weight | 161.00g |
| Dimensions | 280.00mmH x 22.00mmW x 22.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
What's in the Box
|
NTG2 Multi-Powered Shotgun Microphone |
 |
RM5 Durable Microphone Clip |
 |
ZP2 Padded Zip Pouch (large) |
 |
WSVM Pop Filter/Wind Shield |
