Saramonic SmartRig+ 2-Ch Audio Interface with XLR, 1/4" & 1/8” Inputs for iPhone, iPad, Android Smartphones & Tablets or DSLR, Mirrorless & Video Cameras
$ 129.00
Saramonic SmartRig+ 2-Ch Audio Interface with XLR, 1/4" & 1/8” Inputs for iPhone, iPad, Android Smartphones & Tablets or DSLR, Mirrorless & Video Cameras
MFR SKU: SMARTRIG+ | Helix SKU: SRSMARTRIGP
Overview
The Saramonic SmartRig+ is a compact 2-channel audio interface that enables you to connect any combination of professional microphones, guitars or instruments to DSLRs and video cameras, as well as iPhones, iPads, iPod Touches and Android devices that feature a headphone jack. It’s an ultra-portable, lightweight device that vastly improves the sound quality of the videos you shoot. It also lets you create broadcast-quality audio recordings on your mobile device for podcasting and news gathering. In addition, you can use powerful music-making apps to their full potential by connecting real instruments and professional microphones to your mobile device.
The SmartRig+ features three different kinds of inputs, and there are two of each: XLR, 1/4” (6.35mm), and 1/8“ (3.5mm). All of the inputs remain active, and you can use 4 of them at the same time. The XLR inputs can supply condenser microphones with +48 volts of phantom power, which enables you to use almost any kind of microphone. The 1/4” (6.35mm) inputs are impedance-matched to provide the best sound quality from electric guitars and basses, and acoustic instruments with pickups.
A Mono/Stereo switch on the SmartRig+ lets you choose how the channels will be mixed when connected to a camera or mobile device. When set to Mono, anything you plug in will be recorded to both channels of the camera or mobile device. The Mono setting is useful when you’re just plugging in a single microphone, because the audio will be recorded to both channels on the camera or mobile device. The Stereo setting is useful when you’re plugging two microphones or instruments, because both channels will be recorded as independent tracks. This gives you better editing options in post-production.
If you shoot video on your smartphone, you can connect professional shotgun and lavalier mics to vastly improve your sound quality. The built-in preamps provide clean sound, and if your camera lacks a headphone output, you can use the jack on the SmartRig+. Two nicely-sized gain control knobs allow you to dial in perfect levels with ease. The SmartRig+ is an affordable and ultra-portable device with impeccable sound quality that provides an impressive amount of functionality to a wide range of uses.
Specifications:
Frequency Response: 20Hz to 20kHz, +/-0.5dB
Distortion: Less than 0.01% @ 1kHz, -30dBu input
Signal to Noise Ratio: 80dB @ 1kHz, -30dBu input
Noise: -98dB full band (with Phantom Power)
Gain: +23dBu
Maximum Output Level: 2Vrms
Phantom Power: 48V
Phantom Max Current: 13mA
Channels: 2
Inputs: 2 x XLR + 1/4" (6.35mm) Combo Jack and 2 x 1.8” (3.5mm) TRS
Selectable Mixer: Mono or Stereo Output via Toggle Switch
Outputs: 1 x Male 1/8” (3.5mm) TRRS Output Cable and 1 x Female 1.8” (3.5 mm) Headphone Jack
Selectable Output: TRS for Camera/Recorder or TRRS for Mobile Devices via Toggle Switch
Battery: 1 x 9-volt (Alkaline or Lithium)
Dimensions: 4.72" x 1.57" x 1.57" (120 x 40 x 40mm)
Weight: 4.6 oz (130g)
Saramonic SmartRig+UC Professional 2-Channel Audio Interface with XLR, 1/4"" & 1/8"" Inputs for USB Type-C Android Smartphones & Tablets, PCs & more
$ 179.00
Saramonic SmartRig+UC Professional 2-Channel Audio Interface with XLR, 1/4"" & 1/8"" Inputs for USB Type-C Android Smartphones & Tablets, PCs & moreMFR
SKU: SMARTRIG+DI | Helix SKU: SRSMARTRIGPDI
Overview
The Saramonic SmartRig+UC is a portable two-channel microphone, guitar & instrument audio interface for USB Type-C devices. It is designed to let you record professional quality audio by connecting professional microphones, guitars and other instruments to your smartphone, tablets, PCs and more.
Two independent channels allow you to connect and control gain on multiple microphones, guitars or instruments at the same time. The interface also features 3 types of inputs to accommodate any set up; two XLR mic inputs that combo to 2 1/4" (6.35mm) guitar/instrument inputs, and two 1/8" (3.5mm) inputs for connecting any instrument or microphone.
The three inputs on the SmartRig+UC provide unlimited creative potential. You can connect a guitar and microphone at the same time, or plug in two microphones for music recording, podcasting, or journalistic work. You can even connect the stereo outputs of a digital piano or synthesizer or attach a shotgun and a wireless mic to vastly improve the sound quality of the videos you shoot with your mobile device.
The SmartRig+UC also provides +48V phantom power for professional condenser microphones and includes a 3.5mm headphone output for real-time sound monitoring. The two large gain control thumbwheels make it easy to set precise levels. Two recording options let you toggle between Mono and Stereo output modes as necessary.
Powered by one 9V battery, the SmartRig+UC does not use your portable device’s power. Giving you more time to create and perform. The SmartRig+UC also features a 3/8” thread on the back of the device for nearly limitless rigging options and the Included strap make it easy to attach to a selfie stick, tripod or mic stand.
- Two-Channel Portable Audio Interface for USB Type-C and Android Devices
- Two XLR Microphone with +48V & 1/4” (6.35mm) Instrument Combo Inputs and Two 1/8" (3.5mm) Inputs
- 3.5mm Headphone Monitoring Output with REC/PLAY switch
- Connect Shotgun, Lavalier, or Wireless Microphones to Improve Sound for Video
- Compatible with USB-C Android Devices, Smartphones, Tablets, Laptops, and PCs
Specifications:
Frequency Response: 20Hz to 20kHz, +/-0.5dB
Distortion: Less than 0.01% @ 1kHz, -30dBu input
Signal to Noise Ratio: 80dB @ 1kHz, -30dBu input
Noise: -98dB full band (with Phantom Power)
Gain: +23dBu
Maximum Output Level: 2Vrms
Phantom Power: 48V
Phantom Max Current: 13mA
Channels: 2
Inputs: 2 x XLR + 1/4" (6.35mm) Combo Jack and 2 x 1.8” (3.5mm) TRS
Selectable Mixer: Mono or Stereo Output via Toggle Switch
Outputs: 1 x Male USB-C Output Cable and 1 x Female 1.8” (3.5 mm) Headphone Jack
Battery: 1 x 9-volt (Alkaline or Lithium)
Dimensions: 4.72" x 1.57" x 1.57" (120 x 40 x 40mm)
Weight: 4.6 oz (130g)
Saramonic SmartRig-UC Professional Audio Interface with XLR & 1/4"" Inputs for USB Type-C Android Smartphones & Tablets, PCs & more
$ 119.00
Saramonic SmartRig-UC Professional Audio Interface with XLR & 1/4"" Inputs for USB Type-C Android Smartphones & Tablets, PCs & more
MFR SKU: SMARTRIG-UC | Helix SKU: SRSMARTRIGUC
Overview
The Saramonic SmartRig UC is a portable microphone, guitar & instrument audio interface for USB Type-C devices. It is designed to let you record professional quality audio by connecting a professional microphone, guitar or other instruments to your smartphone, tablets, PCs and more. You can connect a guitar or microphone for music recording, podcasting or journalistic work. You can even attach a shotgun, lavalier or wireless mic to vastly improve the sound quality of the videos you shoot with your mobile device.
Specifications:
Frequency Response: 20Hz to 20kHz, +/-0.5dB
Distortion: Less than 0.01% @ 1kHz, -30dBu input
Signal to Noise Ratio: 80dB @ 1kHz, -30dBu input
Noise: -98dB full band (with Phantom Power)
Gain: +23dBu
Maximum Output Level: 2Vrms
Phantom Power: 48V
Phantom Max Current: 13mA
Channels: 1
Inputs: 1 x XLR + 1/4" (6.35mm) Combo Jack
Outputs: 1x Male USB-C Output Cable and 1 x Female 1.8” (3.5 mm) Headphone Jack
Battery: 1 x 9-volt (Alkaline or Lithium)
Dimensions: 3.65" x 1.61" x 1.65" (88 x 41 x 42mm)
Weight: 2.65 oz (75g)
Saramonic SoundBird T3 Professional Shotgun Microphone with Li-Ion Battery, Low-Cut & Hi-Boost Filters, -10dB Pad, Shock Mount, Windscreen, XLR Cable, Hard Case & More
$ 299.00
Saramonic SoundBird T3 Professional Shotgun Microphone with Li-Ion Battery, Low-Cut & Hi-Boost Filters, -10dB Pad, Shock Mount, Windscreen, XLR Cable, Hard Case & More
MFR SKU: SOUNDBIRDT3 | Helix SKU: SRSOUNDBIRDT3
Overview
The Saramonic SoundBird T3 is an advanced professional shotgun microphone that delivers clear, broadcast-quality sound and provides a comprehensive set of features with a premium suite of included accessories. An internal rechargeable Li-Ion battery provides power for up to 150-hours, and it can also be powered by external phantom power. The all-brass construction is extremely durable and helps to reduce radio frequency interference. The gold-plated XLR output provides the best possible signal transfer and resists corrosion. At 11.1” the SoundBird T3 is the ideal size for use on a camera, boom pole or stand.
What you need to sound the best
Several built-in controls let you achieve the best possible sound quality in a variety of situations. A Low-Cut button eliminates distracting deep bass sounds like the rumble from HVAC, footsteps and traffic noise. A High-Boost button compensates for frequencies that are lost when you use wind protection and increases vocal intelligibility. A -10dB Pad makes it possible to capture loud sounds without clipping. All of the buttons are illuminated so you can easily see the settings, and an On/Off button changes color based on power source and battery level. Your settings are saved when you turn the mic on and off.
A travel-ready suite of premium accessories
You need many accessories to use a shotgun microphone properly, and instead of making additional purchases, all of these accessories are all included with SoundBird T3. You get an SR-SMC2 shock mount for attaching to the shoe of a camera or a boom pole. You also get a 2-foot (61cm) XLR output cable, a dedicated stand mount, a storage pouch, a foam windscreen, a MicroUSB charging cable, a hard-shell travel case with a handle and protective foam inserts and a reusable cable strap. You will have all of the essentials for capturing the best possible sound quality for your productions.
- An advanced professional shotgun microphone with multiple filters that delivers clear, broadcast-quality sound and includes an array of useful accessories with a hard travel case
- Built-in illuminated buttons: Low-Cut filter removes unwanted rumble sounds, High-Boost adds high frequencies that are lost with wind protection and increases vocal intelligibility, -10dB Pad captures loud sounds
- Powered by internal rechargeable Li-Ion battery with 150-hour run-time or with external phantom power, illuminated On/Off button changes color based on power source and battery level
- Durable solid brass construction prevents radio-frequency interference, gold-plated XLR connector resists corrosion and provides the best possible signal transfer
- Includes a premium shock mount to attach to cameras or boom poles, a dedicated stand mount, storage pouch, foam windscreen, 2-foot (61cm) XLR output cable, hard travel case and more
Specifications:
Polar Pattern: Cardioid
Frequency Range: 75Hz to 20kHz
Sensitivity: -38 ± 3dB (0dB-1V/Pa, at 1kHz 1.5V 2.2K)
Output Impedance: 150ohm
Dynamic Range: 125dB (per IEC651)
Maximum SPL: f=1kHz, THD<1% 105dB
Signal-to-Noise Ratio: 80dB SPL (per IEC651)
High-Pass Filter: 150Hz
Pad: -10dB
High Frequency Boost: +6dB
Material: Brass
Power Requirements: 48V Phantom Power or Built-in Lithium Battery
Battery Life: 150 Hours
Output Connection: 3-pin XLR, Balanced Output Between Pin 2 (+), Pin 3 (-) and Pin 1 (Ground)
Diameter: 0.86” (2.2cm)
Length: 11.1” (28.2cm)
Weight: 8.48oz (240.5g)
Saramonic SoundBird V1 Professional Supercardioid Shotgun Microphone with High-Pass Filter, -10dB Pad, Shock Mount, Foam Windscreen & Short XLR Output Cable
$ 199.00
Saramonic SoundBird V1 Professional Supercardioid Shotgun Microphone with High-Pass Filter, -10dB Pad, Shock Mount, Foam Windscreen & Short XLR Output Cable
MFR SKU: SOUNDBIRDV1 | Helix SKU: SRSOUNDBIRDV1
Overview
The Saramonic SoundBird V1 is a professional shotgun microphone that delivers premium, broadcast-quality sound, provides advanced features and comes with a suite of useful accessories. It features a supercardioid, directional pickup pattern allows you to clearly capture sounds in front of the microphone and from a distance, while rejecting unwanted sound from sides and rear. The all-brass construction is both incredibly durable and helps to reduce radio-frequency interference and the finish is both attractive and non-reflective. So, you can be sure it won’t catch the light, and add a glare to your shot. The XLR output is gold-plated to resist corrosion and provide the best possible signal transfer. The 10.7” length is the perfect size to either mount to a camera or use on boom poles and stands.
Shine a light on excellent sound
You will always know what settings are being used on your versatile SoundBird V1 because the built-in buttons are illuminated. The first button activates the high-pass filter, which removes unwanted low-frequency sounds, like the rumble of HVAC systems, footsteps and traffic noise. The second button activates the -10dB pad, which enables you capture louder sounds without distortion. The third button is On/Off, which controls the internal AA battery. When you power SoundBird V1 with external phantom power, the On/Off button illuminates green. When powering with an internal AA battery, it illuminates blue. When the battery is low, it illuminates red. SoundBird V1 also remembers your button settings when turned off and on.
Must-have accessories are included
There are several useful accessories included in the box. You get an adjustable premium shock mount, which allows you to attach the SoundBird V1 to the shoe of a camera or on to a boom pole or stand. The shock mount eliminates vibration and handling noise. A foam windscreen is also included, which diffuses rushing air noise when used indoors, and gentle breezes when used outdoors. A 2-foot (61cm) XLR cable is also included, which is the ideal length when mounting to a camera.
- Professional shotgun microphone that delivers premium, broadcast-quality sound for video production, interviews, filmmaking, YouTube videos and more
- Features a built-in high-pass filter that removes unwanted low-frequency sounds and a -10dB pad for capturing loud sounds, both are controlled with dedicated illuminated buttons
- Powered with an internal removable AA battery or external phantom power, illuminated On/Off button changes color based on power source and battery level
- Durable solid brass construction prevents radio-frequency interference, gold-plated XLR connector resists corrosion and provides the best possible signal transfer
- Includes a foam windscreen, 2-foot (61cm) XLR output cable, and a premium shock mount to attach directly to a camera, stand, or a boom pole
Specifications:
Microphone Type: Condenser
Polar Pattern: Supercardioid
Frequency Range: 50Hz to 20kHz
Sensitivity: -32±3dB (0dB-1V/Pa, at 1kHz)
Signal-to-Noise Ratio: 80dB SPL
Maximum SPL: 132dB
High-Pass Filter: 200Hz
Pad: -10dB
Power Requirements: 48V Phantom Power or 1 x AA Battery
Operating Temperature: 23°F to 122F (-5°C to 50°C)
Output Connection: 3-pin XLR, Balanced Output Between Pin 2 (+), Pin 3 (-) and Pin 1 (Ground)
Diameter: 0.78” (20mm)
Length: 10.7” (272mm)
Weight: 6.88oz (195g)
Saramonic SR-AX100 Battery-Free 2-Channel On-Camera 1/8” (3.5mm) Audio Mixer for DSLR, Mirrorless & Video Cameras
$ 39.00
Saramonic SR-AX100 Battery-Free 2-Channel On-Camera 1/8” (3.5mm) Audio Mixer for DSLR, Mirrorless & Video Cameras
MFR SKU: SR-AX100 | Helix SKU: SRSRAX100
Overview
The Saramonic SR-AX100 is an ultra-compact, two-channel audio mixer that makes it possible to connect and mix two microphones to DSLR, mirrorless, and video cameras that only have a single mic input and it doesn’t require power to operate. A built-in shoe mount on the base lets you attach the AX100 to your camera, and a 1/4-20 tripod thread makes it possible to easily attach it to camera cages, tripods and more.
There are three 1/8“ (3.5mm) (1 stereo and 2 mono) inputs on the back of the AX100 for connecting battery-powered microphones and wireless microphone receivers. The two attenuator knobs on the front of the AX100 make it easy to adjust the levels of the microphones that are plugged in, and the knobs feature stepped indents for precise adjustments. A Mono/Stereo switch lets you control how the microphones are recorded to your camera. Stereo mode separates the audio into individual left and right channels on your camera, perfect for getting two separate mic signals to mix in post-production. In Mono mode, they are mixed together which is useful when you have two mics plugged in, but you want the audio mixed to both left and right channels in your camera.
The top and sides of the AX100 feature durable shoe mounts, which acts as a bracket that transforms the single shoe on your camera into three, giving you convenient places to confidently mount lights, microphones, and wireless receivers. The AX100 is so small and lightweight that you can easily bring it with you everywhere you go, and its all-metal construction means it’s built like a tank and prepared for travel.
Please note: Microphones that do not run on batteries are not compatible.
- Allows you to plug and mix 2 microphones into cameras with only 1 mic input
- Ultra-compact and operates without batteries
- Integrated bottom shoe mount with metal 1/4-20 tripod thread
- Large stepped level control knobs with precise adjustment, durable all-metal construction
- Durable construction with 3 additional shoe mounts for attaching microphones, lights, and more
Specifications:
Inputs: 1 x 1/8" (3.5 mm) stereo mini-jack input, 2 x 1/8" (3.5 mm) mono mini-jack inputs
Output: 1 x 1/8" (3.5 mm) stereo mini-jack output
Input Level: -35 dBu minimum
Gain: Unity
Frequency Response: 20 Hz to 20 Khz (+/-0.5 dB)
Dimensions: 3.0 x 2.3 x 2.2" (76 x 59 x 55mm)
Weight 5.4 oz (153.1g)
Saramonic SR-HM7 Di Digital Dynamic Handheld Microphone with Lightning Cable for Apple iPhone & iPad & USB Cable for Windows PCs & Apple Mac Computers
$ 199.00
Saramonic SR-HM7 Di Digital Dynamic Handheld Microphone with Lightning Cable for Apple iPhone & iPad & USB Cable for Windows PCs & Apple Mac Computers
MFR SKU: SR-HM7DI | Helix SKU: SRSRHM7DI
Overview
The Saramonic SR-HM7 DI is a handheld digital dynamic microphone that delivers premium, broadcast-quality sound for Podcasting, Live Sound, Recording and more. Included, removeable dedicated output cables for direct connection to iPhone, iPad, and iPod Touch via the Lightning port, and a USB cable for use with Windows PCs and Apple Macintosh computers. A headphone jack enables you to listen to your sound during recording and playback. The microphone was designed to enhance the clarity of the human voice, which makes it an excellent choice for use in podcasting, presentation videos, news gathering, audio for smartphone videos, live streaming, vlogging, music recording and more.
The SR-HM7 DI is incredibly easy to use. You just connect an output cable and start recording. A switch at the base of the microphone allows you to change between Recording to Playback operation modes. An included rubber bottom cap allows you to keep the output connector firmly attached to the base of the microphone preventing the output cables from accidentally being disconnected when recording audio on-the-go. The sleek black exterior of the SR-HM7 DI features an anti-glare finish that looks great on camera and will not reflect on-camera lights, stage lights, or studio lights.
The long, tapered handle of the SR-HM7 DI is comfortable to hold and provides plenty of space for mic flags to advertise your channel or brand. The all-metal design helps to reduce handling noise, and the durable microphone grill diffuses wind noise — which helps you get great sound outdoors. The cardioid pickup pattern reduces unwanted sounds to the sides and rear, and the built-in high-quality preamp and analog-to-digital converter ensure that you get the best possible audio quality. Whether you’re shooting on-the-street interviews with your iPhone for your YouTube channel or a major network, or if you’re recording a podcast at home on your computer or in the field with your Apple device, the SR-HM7 DI will deliver rich and detailed sound every time.
- Professional handheld digital handheld microphone with Lightning Cable for Apple iPhone, iPad, and iPod Touch and USB cable for Windows PCs and Macintosh Computers
- Incredibly easy to use — just connect and start recording, dedicated headphone output for monitoring audio during recording and playback
- Long tapered handle is comfortable to hold and provides ample space for mic flags, all-metal design reduces handling noise, durable grill diffuses wind noise outdoors
- Frequency response optimized for clarity of the human voice, cardioid pickup pattern reduces unwanted sounds to the sides and rear
- Sleek black exterior features an anti-glare finish that will not reflect on-camera lights, stage lights, or studio lights, built-in high-quality preamp and analog-to-digital converter
Specifications:
Frequency Response: 75 Hz - 20 kHz
Output: Micro USB port
Headphone Output: 1/8" (3.5 mm)
Type of Microphone: Unidirectional dynamic capsule
Sampling Rate: 44.1 kHz, 48 kHz, 96 kHz
Sensitivity: 0°-52.4 dB±3 dB(0 dB= 1V/ ubar at 1KHz)
Gain: 35 dB
Signal to Noise Ratio: 80 dBU
Power: USB plug-in power
Compatible Devices: Apple iOS devices, Windows PC computers, Apple Macintosh computers
Indicators: Blue light = recording mode, green light = playback mode, green and blue light = recording and playback at the same time (only iPhone and iPad have this mode)
Dimensions: 2 x 10.2” (51 x 258 mm)
Weight: 10.2 oz (290 g)
Saramonic SR-HM7 UC Digital Dynamic Handheld Microphone with USB-C for Android Smartphones & Tablets & USB for Windows PCs & Apple Mac Computers
$ 199.00 - Épuisé
Saramonic SR-HM7 UC Digital Dynamic Handheld Microphone with USB-C for Android Smartphones & Tablets & USB for Windows PCs & Apple Mac Computers
MFR SKU: SR-HM7UC | Helix SKU: SRSRHM7UC
Overview
The Saramonic SR-HM7 UC is a handheld digital dynamic microphone that delivers premium, broadcast-quality sound and comes with dedicated output cables for direct connection to the USB-C ports found on modern Android devices and computers, and a USB-A cable for use with Windows PCs and Apple Macintosh computers. A built-in headphone jack lets you to listen to your sound during recording and playback. The microphone element was designed to enhance the clarity of the human voice, which makes it an excellent choice for use in podcasting, presentation videos, news gathering, audio for smartphone videos, live streaming, vlogging, music recording and more.
The SR-HM7 UC is incredibly easy to use. You just connect an output cable and start recording. A switch at the base allows you to change between Recording to Playback operation modes. An included rubbery bottom cap allows you to keep the output connector firmly attached to the base of the microphone. This prevents the cables from accidentally being disconnected, which is ideal for recording audio and shooting video on-the-go. The sleek black exterior of the SR-HM7 UC features an anti-glare finish that looks great on camera and will not reflect on-camera lights, stage lights, or studio lights.
The long, tapered handle of the SR-HM7 UC is comfortable to hold and provides plenty of space for mic flags to advertise your channel or brand. The all-metal design helps to reduce handling noise, and the durable microphone grill diffuses wind noise — which helps you get great sound outdoors. The cardioid pickup pattern reduces unwanted sounds to the sides and rear, and the built-in high-quality preamp and analog-to-digital converter ensure that you get the best possible audio quality. Whether you’re shooting on-the-street interviews with your Android phone for your YouTube channel or a major network, or if you’re recording a podcast at home on your computer or in the field with your mobile device, the SR-HM7 UC will deliver rich and detailed sound every time.
- Professional handheld USB microphone that delivers broadcast-quality sound with direct connection to Android mobile devices, Windows PCs and Apple Macintosh computers
- Incredibly easy to use — just connect to your device and start recording, a dedicated headphone jack lets you monitor audio during recording and playback
- Durable all-metal design reduces handling noise, long tapered handle looks professional and provides ample space for mic flags
- Frequency response optimized for clarity of the human voice, cardioid pickup pattern reduces unwanted sounds to the sides and rear, grill diffuses wind noise outdoors
- Sleek black exterior features an anti-glare finish that will not reflect on-camera, stage, or studio lights, built-in high-quality preamp and analog-to-digital converter
Specifications:
Frequency Response: 75 Hz - 20 kHz
Output: Micro USB port
Headphone Output: 1/8" (3.5 mm)
Type of Microphone: Unidirectional dynamic capsule
Sampling Rate: 44.1 kHz, 48 kHz, 96 kHz
Sensitivity: 0°-52.4 dB±3 dB(0 dB= 1V/ ubar at 1KHz)
Gain: 35 dB
Signal to Noise Ratio: 80 dBU
Power: USB
Compatible Devices: Windows PC computers, Apple Macintosh computers, Android devices with USB-C ports, Chromebooks
Indicators: Blue light = recording mode, green light = playback mode, green and blue light = recording and playback at the same time
Dimensions: 2 x 10.2” (51 x 258 mm)
Weight: 10.2 oz (290 g)
Saramonic SR-TM7 15.5" Professional Supercardioid XLR Shotgun Condenser Microphone with Rechargeable Lithium-Ion Battery
$ 339.00 - Épuisé
Saramonic SR-TM7 15.5" Professional Supercardioid XLR Shotgun Condenser Microphone with Rechargeable Lithium-Ion Battery
MFR SKU: SR-TM7 | Helix SKU: SRSRTM7
Overview
The Saramonic SR-TM7 is a professional XLR shotgun microphone that delivers clear, broadcast-quality sound to video cameras, audio recorders, and DSLR and mirrorless cameras that have XLR adapters. Its long-shotgun design enables it to excel at capturing sounds in wide shots and in situations where you cannot get close to the sound source.
The TM7 offers several useful features and has a built-in rechargeable battery for power. There are 5 illuminated buttons that are easy to adjust in low-light. The -10 dB PAD button allows you to cleanly capture loud sounds. The +6 dB high frequency boost button enhances sharpness and clarity. There are two low-cut buttons (75 and 150 Hz) that make dialog more intelligible and eliminate distracting deep bass noises, like the low rumble of vehicles and air conditioners.
The built-in lithium battery can power the TM7 for 150 hours. It can also be powered via phantom and the power button changes color to indicate energy source and battery life. A Micro-USB charging port is unobtrusively integrated into the XLR connector, and a charging cable is included. You also get a short XLR cable, a mic clip with a camera shoe mount, and a foam windscreen in the box.
The TM7 features a durable metal construction that will handily withstand the demanding world of video production. The absence of a disposable battery compartment makes the all-metal TM7 more lightweight, and the built-in battery digitally controls the on-board filters and saves your settings when the microphone is turned off. A high-wind furry windscreen that was designed specifically for the TM7 called the TM-WS7 can be used when shooting outdoors in windy conditions (sold separately).
- Professional broadcast-quality 15.5” shotgun microphone that runs on built-in lithium battery or phantom power
- Supercardioid polar pattern excels at capturing sounds in tight shots with extreme directionally and wide shots and in situations where you cannot get close to the sound source
- Low-cut button makes dialog more intelligible and eliminates distracting rumble noises, +6 dB high frequency boost button enhances sharpness and clarity, -10 dB button allows you to cleanly capture loud sounds
- 150 hours of operation time from the built-in lithium-ion battery, power button changes color to indicate energy source and battery life, Micro-USB charging port in the XLR connector
- Illuminated buttons are easy to adjust in low-light working environments
Specifications:
Frequency Response: 20 Hz to 20 kHz
Acoustic Principle: Line gradient
Polar Pattern: Supercardioid
Sensitivity: -30±3dB (0dB=1V/Pa,at 1KHz) 1.5V 2.2kΩ
Output Impedance: 200 ohm
Max Output: 10 dBu (at 1 kHz, 1% THD into 1 kOhm)
Dynamic Range: 120 dB
Max SPL: 145 dB
Signal to Noise Ratio: 80 dB SPL
Filters: High-pass 75 and 150 Hz
Battery: 48V Phantom or internal lithium-ion battery (150 hours)
Output Connector: 3-pin XLR (Balanced)
Dimensions: 15.55 x .9 x .9" (39.5 x 2.3 x 2.3cm)
Weight: 7.7 oz (219g)
SARAMONIC UWMIC15 16-CHANNEL UHF WIRELESS LAVALIER MICROPHONE SYSTEM WITH PORTABLE CAMERA-MOUNTABLE WIRELESS RECEIVER
$ 149.00 - Épuisé
SARAMONIC UWMIC15 16-CHANNEL UHF WIRELESS LAVALIER MICROPHONE SYSTEM WITH PORTABLE CAMERA-MOUNTABLE WIRELESS RECEIVER
MFR SKU: UWMIC15 | Helix SKU: SRUWMIC15
Overview
The Saramonic UwMic15 is a portable, camera-mountable wireless microphone system that utilizes the UHF (Ultra High Frequency) spectrum and provides stellar, broadcast-quality sound in a package that’s substantially more affordable than other UHF wireless systems. The included RX15 receiver and TX15 beltpack transmitter are both compact and lightweight, and the SR-M1 clip-on lavalier microphone sounds excellent and is visually discreet when clipped to collars and clothing. The UwMic15 system is perfect for DSLRs, mirrorless cameras, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube and more.
It works right out of the box and is remarkably easy to use. You just connect the microphone, turn on the power and go. The RX15 receiver features a headphone output, enabling real-time audio monitoring if your camera lacks a headphone jack. The UHF spectrum helps you avoid interference, and the 555-579 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. There are 16 channels available, which allows you to run multiple sets of UwMic15 systems at the same time. If you ever have an issue with interference and need to change channels, built-in infrared makes synchronizing easy.
The power button on the TX15 beltpack transmitter can easily be set to “locked” to prevent it from accidentally being turned off when in use. If the person wearing the microphone needs privacy, a quick push of a button turns on a muting feature, and a flashing red LED reminds you to unmute it afterward. The system offers an impressive operating range of up to 330-feet (100m).
This kit includes both 1/8“ (3.5mm) and XLR output cables so you can use the UwMic15 with DSLRs, mirrorless cameras, cinema cameras, camcorders, professional video cameras, audio recorders, mixers and more. The UwMic15 system is also expandable. Optional transmitters and output cables (sold separately) are available, giving you unrivaled flexibility. They make it possible to use a wireless handheld microphone with the SR-HM15 or a wireless XLR plug-on transmitter with the SR-XLR15, and to connect the included RX15 receiver to smartphones, tablets, computers, GoPro cameras and more.
- Broadcast-quality UHF wireless lavalier microphone system with camera-mountable portable receiver, UHF frequency spectrum helps you avoid interference
- Headphone monitor output enables you to always listen to your sound, even if your camera lacks a headphone jack
- Easy-to-use with plug-and-play operation, easy-to-read backlit LCD displays on both units, included microphone and output cables feature locking connectors to prevent unplugging
- Wireless infrared synchronization makes it easy to sync channels between the RX15 receiver and TX15 transmitter, 16 selectable channels for running multiple systems
- Up to 330-ft (100m) operating distance, mute button function with red flashing LED to remind you it’s muted
Specifications:
Channels: 16
Oscillator Type: PLL synthesizer
Output: 1/8“ (3.5mm) mini jack
Antenna: 1/4 λ wire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Frequency Range: 555 - 579 MHz
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Power: 2 x AA batteries
Dimensions: 7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.58oz (73g) without batteries
TX15 Transmitter Specifications:
Channels:16
Oscillator Type: PLL synthesizer
Carrier Frequencies:555 - 579 MHz
Reference Deviation: +/- 5 kHz
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4 λ wire antenna
Audio Input Connector: 1/8“ (3.5mm) mini jack
Reference Audio Input Level: -60 dBV
Distortion: 0.5% or less
Power: 2 x AA batteries
Dimensions:7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.4oz (68g) without batteries0
In The Box:
1 x RX15 portable UHF receiver
1 x TX15 UHF transmitter
1 x SR-M1 omnidirectional lavalier microphone
1 x alligator-style lavalier mic clip
1 x camera shoe mount with an integrated 1/4 20 tripod thread
1 x short coiled locking mini-plug output cable with gold-plated connectors
1 x short locking gold-plated mini-plug to XLR male output cable
2 x removable belt clips
2 x SR-UMBC1 battery compartments
1 x printed manual
1 x warranty card
Optional Accessories (Sold Separately):
- SR-XLR15 Plug-on UHF transmitter with +48V phantom power for XLR microphones
- SR-HM15 Wireless UHF handheld vocal microphone
- LC-C35 Output Cable: Locking 1/8” (3.5mm) to Lightning cable for iPhone & iPad
- UTC-C35 Output Cable: Locking 1/8” (3.5mm) to USB Type-C cable for smartphone or tablets
- SR-PMC1 Output Cable: Locking 1/8” (3.5mm) to TRRS cable for Smartphone or Tablets
- USB-CP30 Output Cable: Locking 1/8” (3.5mm) to USB cable PC or Mac computers
- SR-GMC1 Output Cable: Locking 1/8” (3.5mm) to select GoPro cameras
- LM-WS Fur Windjammer for SR-M1 Lavalier 3-Pack
- SR-LMWS3 Replacement Foam Windscreens 3-Pack
- WM4C-MC1 Replacement Mic Clip
- SR-XM1 Swiveling Omnidirectional Condenser Microphone
- SR-UMBC1 Replacement Battery Compartment
- SR-UM10-MC2 Replacement Belt Clip
- SR-UM10-MC1 Replacement Shoe-Mount Adapter
- SR-UM10-C35XLR Replacement Locking type 1/8” (3.5mm) to XLR Male Output Cable
- SR-UM10-C35 Replacement Locking type 1/8” (3.5mm) to 1/8” (3.5mm) Output Cable
- SR-UM10-M1 Replacement SR-M1 Lavalier
- SR-UC-201 3.5mm Female TRS Microphone Adapter Cable to 3.5mm Male TRRS for smartphone or tablets
- SR-25C35 3.5mm to 2.5mm Microphone Output Cable for SSE with Fuji Cameras
- SR-TX15 Replacement UHF beltpack transmitter
Saramonic UwMic9 RX9+TX9 UHF Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
$ 269.00 - Épuisé
Saramonic UwMic9 RX9+TX9 UHF Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
MFR SKU: UWMIC9TX9RX9 | Helix SKU: SRUWMIC9TX9RX9
Overview
The Saramonic UwMic9 RX9+TX9 is a portable, camera-mountable UHF lavalier wireless system that provides stellar, broadcast-quality sound and offers powerful features that greatly exceed the capabilities of wireless systems that cost over twice as much. The included dual-channel RX9 receiver gives you the ability to run two separate wireless microphones by adding an additional transmitter (sold separately). This system is perfect for DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. Both components feature sturdy metal construction and deliver excellent sound quality in a low-cost package. This kit is ultra-compact, lightweight, and easy to bring with you on every shoot.
The UwMic9 is remarkably easy to use. It works right out of the box. You just plug in the mic, turn on the power and go. It utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you if needed and the infrared synchronization makes the process a snap. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. The RX9 receiver also includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone output.
The compact, dual-channel RX9 receiver features two separate wireless receivers. This gives you the ability to run two separate wireless microphones anytime, by just adding an additional optional transmitter. Locking 1/8” (3.5mm) mini-plug and XLR output cables are both included so you can use the UwMic9 with DSLRs, mirrorless cameras, cinema cameras, camcorders, professional video cameras, audio recorders and more. This flexible system can also be used to transmit line-level audio, such as an output from a mixer. This can be useful at weddings and other events where you need to wirelessly record crystal-clear audio from a soundboard.
Another great benefit is that your UwMic9 system is expandable. Optional transmitters and output cables (sold separately) are available, giving you unrivaled flexibility. Easily add an additional beltpack transmitter and lavalier microphone, or two wireless handheld microphones, or use wireless plug-on transmitters. You can also connect the included RX9 receiver to smartphones, tablets, computers, GoPro cameras and more with optional output cables. The UwMic9 RX9+TX9 is a high-quality system with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Broadcast-quality UHF wireless lavalier microphone system with a dual-channel camera-mountable portable receiver you can easily expand by adding a second transmitter
- Easy-to-use and works right out of the box with plug-and-play operation
- Built-in headphone output so you can always hear your sound — even when your camera lacks a headphone jack
- Durable all-metal construction with easy-to-read backlit LCD displays
- Offers up to 330-foot (100m) operating distance with auto-scan feature finds the best channels for you and infrared makes it easy to sync channels
Specifications:
RX9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Output: Locking 1/8” (3.5mm) TRS mini-jack
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.72 oz (218.7g) (without batteries)
TX9 Transmitter
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic UwMic9 RX9+TX9+TX9 2-Person Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
$ 399.00
Saramonic UwMic9 RX9+TX9+TX9 2-Person Wireless Lavalier Microphone System with Portable Dual-Channel Camera-Mountable Receiver
MFR SKU: UWMIC9TX9TX9RX9 | Helix SKU: SRUWMIC9TX9TX9RX9
Overview
The Saramonic UwMic9 RX9+TX9+TX9 is a portable, dual-channel, camera-mountable UHF wireless system that provides stellar, broadcast-quality sound and enables you to use clip-on lavalier mics on two separate people while only requiring you to attach a single ultra-compact receiver to your camera. This system is perfect for DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. Every component features sturdy metal construction and delivers excellent sound quality in a low-cost package. The entire kit is ultra-compact, lightweight, and easy to bring with you on every shoot.
The UwMic9 is remarkably easy to use. It works right out of the box. You just plug in the mics, turn on the power and go. It utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap. There are 96 channels available, which enables you to run multiple sets of UwMic9 systems at the same time without issues. Easy-to-read backlit LCD displays on both of the transmitters and the receiver let you make quick adjustments to the intuitive menus in the brightest or darkest environments. The RX9 receiver also includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone output.
Locking 1/8” (3.5mm) mini-plug and XLR output cables are both included so you can use the UwMic9 with DSLRs, mirrorless cameras, cinema cameras, camcorders, professional video cameras, audio recorders and more. This flexible system can also be used to transmit line-level audio, such as an output from a mixer. This can be useful at weddings and other events where you need to wirelessly record crystal-clear audio from a soundboard in addition to running a wireless mic.
The power button on the TX9 beltpack transmitter can easily be set to “locked” to prevent it from accidentally being turned off when in use. If the person wearing the clip-on lavalier microphone needs privacy, a quick push of a button turns on a muting feature, and a flashing red LED reminds you to unmute it afterward. The system offers an impressive operating range of up to 330-feet (100m).
Another great benefit is that the UwMic9 system is expandable. Optional transmitters and output cables (sold separately) are available, giving you unrivaled flexibility. They make it possible to add a wireless handheld microphone or a wireless plug-on transmitter, and to connect the included RX9 receiver to smartphones, tablets, computers, GoPro cameras and more. The UwMic9 RX9+TX9+TX9 is a high-quality system with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Complete two-person UHF wireless lavalier microphone kit with a single, dual-channel camera-mountable receiver that provides reliable broadcast-quality sound
- Easy-to-use and works right out of the box with plug-and-play operation
- Built-in headphone output so you can always hear your sound — even when your camera lacks a headphone jack
- Durable all-metal construction with easy-to-read backlit LCD displays
- Offers up to 330-foot (100m) operating distance with auto-scan feature finds the best channels for you and infrared makes it easy to sync channels
Specifications:
RX9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Output: Locking 1/8” (3.5mm) TRS mini-jack
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.72 oz (218.7g) (without batteries)
TX9 Transmitters
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic UwMic9 TX9+RX-XLR9 UHF Wireless Lavalier Mic System with Dual-Channel XLR Plug-In Receiver for Professional Video, DSLR & Mirrorless Cameras
$ 329.00 - Épuisé
Saramonic UwMic9 TX9+RX-XLR9 UHF Wireless Lavalier Mic System with Dual-Channel XLR Plug-In Receiver for Professional Video, DSLR & Mirrorless Cameras
MFR SKU: UWMIC9TX9RXXLR9 | Helix SKU: SRUWMIC9TX9RXXLR9
Overview
The Saramonic UwMic9 TX9+RX-XLR9 is an ultra-portable, dual-channel, camera-mountable wireless UHF lavalier system that has powerful features which greatly exceed the capabilities of wireless systems that cost over twice as much. It allows you to use wireless microphones on two separate people (when you add an additional transmitter, which is sold separately). If you ever need more than one wireless microphone in the future, you can easily and affordably expand this system. This system is easy to use, features durable metal construction, and provides pristine, broadcast-quality sound for interviews, film dialog, field recording, TV and news gathering.
The included RX-XLR9 dual-channel receiver can mount directly to an XLR input of a professional video camera, mixer or an audio recorder, and it can also easily be mounted to a DSLR, Mirrorless or Video Camera and plugged into a 1/8“ (3.5mm) mic input with the included accessories. Unlike other Plug-In wireless receivers that require expensive proprietary batteries, the RX-XLR9 runs on 2 standard AA’s, and can be powered with an external USB battery pack (sold separately). It can also be rotated 320° to make room for other equipment when mounted to a camera. The included TX9 beltpack transmitter and SR-M1 omnidirectional lavalier microphone are also premium quality components.
The UwMic9 utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. Plus, the RX-XLR9 receiver includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone output.
A variety of excellent wireless transmitters are available to expand your system, and because it works with two of them at the same time, you can mix and match to suit your needs. Choose from an additional TX9 beltpack transmitter (which includes an SR-M1 lavalier microphone), the TX-XLR9 Plug-In transmitter, and the HU9 handheld wireless microphone.
- All metal constructed wireless beltpack lavalier transmitter with an ultra-compact dual-channel plug-on camera receiver, both components feature durable metal construction
- Easy to use and provides reliable, pristine broadcast-quality sound, can easily be expanded by adding another separately sold wireless transmitter
- Receiver mounts directly to an XLR input and includes a shoe-mount with 1/8“ (3.5mm) output cable for DSLR, Mirrorless and Video Cameras, rotates 320° to make room for other equipment
- Built-in headphone output so you monitor your sound, even when your camera lacks a headphone jack, easy-to-read backlit LCD display
- Offers up to 330-ft (100m) operating distance, not impacted by the FCC’s ban of the 600 MHz frequencies
Specifications:
RX-XLR9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Receiver Output Connector: 3-Pin XLR Male
Output Cable: 1/8” (3.5mm) TRS Output Cable
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Receiver Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Reference Audio Input Level: -60dBV (MIC Input, 0dB Attenuation)
Batteries: 2 LR6/AA size batteries
Dimensions: 4.4 x 2.48 x 1.02” (112 x 63 x 26mm)
Weight: 3.39 oz (96g) (without batteries)
TX9 Transmitter
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic UwMic9 TX9+TX9+RX-XLR9 Dual-Channel UHF Wireless Lavalier Mic System with Plug-In XLR Receiver for Professional Video, DSLR & Mirrorless Cameras
$ 459.00 - Épuisé
Saramonic UwMic9 TX9+TX9+RX-XLR9 Dual-Channel UHF Wireless Lavalier Mic System with Plug-In XLR Receiver for Professional Video, DSLR & Mirrorless Cameras
MFR SKU: UWMIC9TX92RXLR9 | Helix SKU: SRUWMIC9TX92RXLR9
Overview
The Saramonic UwMic9 TX9+TX9+RX-XLR9 is an ultra-portable, dual-channel, camera-mountable UHF wireless system that enables you to use clip-on lavalier mics on two separate people while only requiring you to attach a single ultra-compact receiver to your camera. The included RX-XLR9 receiver can mount directly to an XLR input of a professional video camera, mixer or an audio recorder, and it can also easily be mounted to a DSLR, Mirrorless or Video Camera and plugged into a 1/8” (3.5mm) mic input with the included accessories. This system is easy to use, features durable metal construction, and provides pristine, broadcast-quality sound for interviews, film dialog, field recording, TV and news gathering.
The UwMic9 utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range in 96 selectable channels is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. Plus, the RX-XLR9 receiver includes a headphone output, enabling real-time audio monitoring if your camera lacks a headphone jack.
Unlike other Plug-In wireless receivers that require expensive proprietary batteries, the RX-XLR9 runs on 2 standard AA’s, and can be powered with an external USB battery pack (sold separately). It can be rotated 320° to make room for other equipment when mounted to a camera. The UwMic9 TX9+TX9+RX-XLR9 is ideal for use with professional video cameras, DSLRs, mirrorless cameras, mixers and portable audio recorders.
- 2 wireless UHF beltpack lavalier transmitters with an ultra-compact dual-channel plug-on camera receiver, all components feature durable metal construction
- Easy to use and provides reliable, pristine broadcast-quality sound, put clip-on lav mics on two people with only a single ultra-portable receiver to your camera
- Receiver mounts directly to an XLR input and includes a shoe-mount with 1/8“ (3.5mm) output cable for DSLR, Mirrorless and Video Cameras, rotates 320° to make room for other equipment
- Built-in headphone output so you can monitor your sound, even when your camera lacks a headphone jack, easy-to-read backlit LCD display
- Offers up to 330-ft (100m) operating distance, not impacted by the FCC’s ban of the 600 MHz frequencies
Specifications:
RX-XLR9 Receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Receiver Output Connector: 3-Pin XLR Male
Output Cable: 1/8” (3.5mm) TRS Output Cable
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Receiver Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Reference Audio Input Level: -60dBV (MIC Input, 0dB Attenuation)
Batteries: 2 LR6/AA size batteries
Dimensions: 4.4 x 2.48 x 1.02” (112 x 63 x 26mm)
Weight: 3.39 oz (96g) (without batteries)
TX9 Transmitters
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
Saramonic VmicLink5 HiFi RX5+TX5 5.8GHz Wireless Lavalier System with Portable 3-Channel Camera-Mountable Receiver
$ 299.00 - Épuisé
Saramonic VmicLink5 HiFi RX5+TX5 5.8GHz Wireless Lavalier System with Portable 3-Channel Camera-Mountable Receiver
MFR SKU: VMICLINK5HIFI | Helix SKU: SRVMICLINK5HIFI
Overview
The Saramonic VmicLink5 RX5 + TX5 is a portable camera-mountable UHF wireless microphone system that delivers premium, broadcast-quality sound — and it does most of the work for you. The system works flawlessly right out of the box. Just plug in the mics, turn on the power and go. Scanning to find the best channel and syncing the transmitter and receiver all happens automatically, so you get more time to concentrate on your shoot. If it detects potential interference, it automatically switches the frequencies for you. All of these features not only make the VmicLink5 HiFi simple to use but create the easiest possible workflow.
The VmicLink5 utilizes the 5.8GHz frequency range, which is much higher and less congested than 2.4GHz, UHF, and VHF. No other commercially available wireless systems work in the 5.8GHz range. Each unit gets 6 hours of power from included lithium-ion rechargeable batteries, so you won’t be wasting money on disposable batteries.
The included RX5 receiver weighs around half as much as most camera-mountable wireless receivers, so it won’t weigh you down. The receiver also features individual level controls for each transmitter and a headphone output enables real-time audio monitoring if your camera lacks a headphone output. Locking 1/8” (3.5mm) mini-plug and XLR output cables are both included so you can use the VmicLink5 with DSLRs, mirrorless, cinema, camcorders, recorders and professional video cameras.
The transmitters feature a locking 1/8” (3.5mm) microphone input and a dedicated line input that makes wirelessly capturing audio from an external source a snap. The TX transmitter also features a combination Power/Mute button which can be “locked” when in use to prevent accidental muting or powering off.
A custom molded carry case is also included, providing an easy way to transport the VmicLink5 or to provide even more protection when in a bag. Additionally, optional output cables (sold separately) are available, giving you unrivaled connectivity. They make it possible to connect the receiver to smartphones, tablets, computers, GoPro cameras and more.
- Incredibly easy-to-use with plug-and-play operation, headphone monitor output in case your camera lacks a headphone jack, up to 6 hours of power from included lithium-ion rechargeable batteries
- Perfect for DSLR, video cams and portable audio recorders for interviews, event videography, film dialog, field recording, broadcast TV and news gathering
- Operates in 5.8GHz frequency range which is less congested than 2.4GHz, UHF and VHF, detects interference and automatically switches channels
- Line-level audio inputs for getting audio from sound systems, smartphones, and more
- Up to 98.4-foot (29.99m) operating distance
Specifications:
RF Power: 15dBm(30mW)
RF Wireless Frequency Range: 5725MHz-5875MHz
Receiver Sensitivity: 198dB
Frequency Response: 40Hz-18KHz/ +/-1 dB
THD+N: 92dB
Sample Rate: 48K/16bit
Frequency Response: 40Hz-18KHz/ +/-1 dB
Voice delay: 18ms
Transmitter Mic in: Max 160mV/-13dBu, 1.8V phantom power
Transmitter Line in: Max 2V/8dBu, 50V DC isolation
Receiver Phone Out: Max 70mW/32Ohm, 10V DC isolation
Receiver Line Out: 4 times mic in gain, 50V DC isolation
Power consumption RX: 180mA/6V
Power consumption TX: 140mA/6V
Antenna gain: 3dBi
Batteries: 7.2V/1000mAh Li-ion (6.5 hours average)
Battery type: LP-E17(CANON EOS M3/750D/760D)
Dimensions RX and TX: 4.45 x 2.52 x 1.10” (113 x 64 x 28mm) each
Weight RX and TX: 5.96oz (169g) each (battery included)
Saramonic VmicLink5 RX+TX 5.8GHz Wireless Lavalier System with Portable Camera-Mountable Receiver
$ 299.00
Saramonic VmicLink5 RX+TX 5.8GHz Wireless Lavalier System with Portable Camera-Mountable Receiver
MFR SKU: VMICLINK5RX+TX | Helix SKU: SRVMICLINK5RXPTX
Overview
The Saramonic VmicLink5 RX+TX is a portable, camera-mountable wireless system that makes using a clip-on lavalier microphone as easy as possible. It’s perfect for DSLR, video cameras or portable audio recorders for capturing interviews, event videography, film dialog, field recording, broadcast TV and news gathering.
The Saramonic VmicLink5 RX+TX provides broadcast-quality sound in a low-cost package. The system works flawlessly right out of the box. Just plug in the mic, turn on the power and go. If it detects potential interference, it automatically switches the frequencies for you. All of these features not only make the VmicLink5 simple to use but create the easiest possible workflow.
The VmicLink5 utilizes the 5.8GHz frequency range, which is much higher and much less congested than 2.4GHz, UHF, and VHF. No other commercially available wireless systems work in the 5.8GHz range. The transmitter and receiver both get 6 hours of power from included lithium-ion rechargeable batteries, so you won’t be wasting money on disposable batteries.
The VmicLink5 features a single, lightweight RX receiver that mounts to your camera and handles the audio from the included transmitter. It features a level control for the transmitter and a headphone output enables real-time audio monitoring if your camera lacks a headphone jack. Locking 1/8” (3.5mm) mini-plug and XLR output cables are both included so you can use it with DSLRs, mirrorless, cinema, camcorders, recorders and professional video cameras.
The VmicLink5 includes a transmitter and an SR-M1 omnidirectional lavalier microphone. The transmitter features a locking 1/8” (3.5mm) microphone input and a dedicated line input that makes wirelessly capturing audio from an external source a snap. The TX transmitter also features a combination Power/Mute button which can be “locked” when in use to prevent accidental muting or powering off.
A carrying case is included, providing an easy way to transport the VmicLink5 or to provide even more protection when in a bag. Additionally, optional output cables (sold separately) are available, giving you unrivaled connectivity. They make it possible to connect the receiver to smartphones, tablets, computers, GoPro cameras and more. If you need to run two wireless transmitters to a single camera-mountable receiver, you need the VmicLink5 RX+TX+TX (sold separately). There is also an option to run three wireless mics with the VmicLink5 RX+TX+TX+TX (sold separately).
- A wireless beltpack lavalier transmitter with a lightweight camera-mountable receiver with XLR and 1/8“ (3.5mm) output cables and carrying case included
- Incredibly easy-to-use with plug-and-play operation, headphone monitor output in case your camera lacks a headphone jack, up to 6 hours of power from included lithium-ion rechargeable batteries
- Line-level audio input for getting audio from sound systems, smartphones, and more
- Operates in 5.8GHz frequency range which is less congested than 2.4GHz, UHF and VHF, detects interference and automatically switches channels, offers up to 98.4-foot (29.99m) operating distance
- Perfect for DSLR, video cams and portable audio recorders for interviews, event videography, film dialog, field recording, broadcast TV and news gathering
Specifications:
Channel Number: 1
RF Power: 15dBm(30mW)
RF Frequency Range: 5725MHz-5875MHz
Receiver Sensitivity: 198dB
Frequency Response: 40Hz-18KHz/ +/-1 dB
THD+N: 92dB
Sample Rate: 48K/16bit
Frequency Response: 40Hz-18KHz/ +/-1 dB
Voice delay: 18ms
Transmitter Mic in: Max 160mV/-13dBu, 1.8V phantom power
Transmitter Line in: Max 2V/8dBu, 50V DC isolation
Receiver Phone Out: Max 70mW/32Ohm, 10V DC isolation
Receiver Line Out: 4 times mic in gain, 50V DC isolation
Power consumption RX: 180mA/6V
Power consumption TX: 140mA/6V
Antenna gain: 3dBi
Batteries: 7.2V/1000mAh Li-ion (6.5 hours average)
Battery type: LP-E17(CANON EOS M3/750D/760D)
Dimensions RX and TX: 4.45 x 2.52 x 1.10” (113 x 64 x 28mm) each
Weight RX and TX: 5.96oz (169g) each (battery included)
Saramonic VWS Professional Windshield & Suspension System (Zeppelin/Blimp) for Shotgun & Pencil Microphones
$ 249.00
Saramonic VWS Professional Windshield & Suspension System (Zeppelin/Blimp) for Shotgun & Pencil Microphones
MFR SKU: VWS | Helix SKU: SRVWS
Overview
The Saramonic VWS is a professional windshield and suspension system for shotgun and pencil microphones that gives you the ability to capture clean-sounding audio in extreme weather conditions. The advanced shock mount suspension system eliminates unwanted vibration and handling noise and performs excellently when used outdoors in high winds, or when used indoors for interior boom pole work, stand usage, or when used handheld with the pistol-grip handle. This is the ideal blimp solution for the Saramonic TM1, TM7, and NV5 shotgun microphones, but it can also perfectly accommodate almost every industry standard shotgun and pencil microphone, up to 14.9” (380mm) in length with a diameter of 0.75-0.91” (19-23mm).
The overall angle of the shock mount and blimp can quickly be adjusted to optimize the position of the microphone. A short, coiled XLR cable is built into the handle and shock mount unit to make it easy to connect microphones without concerning yourself with cable routing. The internal cabling also helps to create a seamless structure to diffuse rushing wind. An acoustically transparent furry windscreen acts as the external layer of the VMS, and it can easily be removed for use in milder environments. A 3/8“ thread at the base of the handle enables you to attach the VMS to boom poles, like the Saramonic Magic Boom Pole, and the 1/4” 20 thread adapter is also included to give you near limitless mounting options.
If your productions move rapidly from interior to exterior shots, the VMS can quickly be modified for those tasks. The rear and front domes of the are easily removable, and an integrated slide rail lets you quickly take off the main blimp housing. Likewise, the system is easy to break down and pack at the end of a shoot, and a carrying pouch is included for convenient storage and transport. All of the components are ultra-lightweight, so they won’t weigh you down when you’re working or moving your gear. The Saramonic VWS enables you to confidently achieve professional-level sound quality in adverse outdoor conditions with a wide variety of shotgun microphones at a remarkably budget-friendly price.
- High-wind protection for using shotgun and pencil microphones outdoors with premium suspension shock mount that eliminates vibration and handling noise when used indoors and out
- For use on boom poles and stands, integrated handle for handheld pistol-grip usage, internal coiled XLR cable for easy connection and seamless routing
- Microphone angle is easily adjustable for optimal positioning, you can also adjust the shock mount to accommodate almost every industry standard shotgun microphone
- Ultra-lightweight design, includes acoustically transparent furry exterior layer, carrying pouch, 1/4” 20 tripod thread adapter
- Gives you the ability to capture clean-sounding audio in extreme weather conditions as well as providing a superior shock mount system for both indoor and outdoor use
Specifications:
Internal Cable Connectors: 3-Pin XLR
Internal Spacing: 4.9 x 15.7” (125 x 400mm)
Microphone Compatibility Dimensions: 14.9” (380mm) long, 0.75-0.91” (19-23mm) diameter
Minimum Dimensions: 18.9 x 5.3 x 7.5” (480 x 134 x 190mm)
Maximum Dimensions: 18.9 x 5.3 x 12.4” (480 x 134 x 314mm)
Weight: 1.65lbs (750g)
