$ 99.95 - Épuisé
Celestron SKU: 18774 | Helix SKU: CT18774
For any Celestron computerized telescope.
Now you can take your telescope anywhere with this portable rechargeable power supply. Whether you have a computerized telescope or operate your telescope using motors, Celestron specially designed this product with the amateur astronomer in mind -- this model is packed with useful features.
Not only useful for setting up and powering your scope, this model can also be useful as an emergency roadside accessory as it includes an emergency light, and booster terminals in place to start weak car batteries.
Will power any computerized mount
Battery Capacity | 84 Wh |
Charging Input | 15VDC @ 800mA |
Charge Time (from flat) | 16 hours |
Telescope Power Port | No |
Car Battery Adapter Port | 12VDC @ 10A, Tip Positive |
USB Charging Port 1 Output | 5VDC @ 1.5A |
USB Charging Port 2 Output | 5VDC @ 1.5A |
Light Panel | White LED spotlight and red lensed LED flashlight |
Weatherproof/Dustproof | No |
Telescope Power Cord | 10 ft (3 m) long car battery adapter |
Strap | Shoulder strap |
Product Dimensions | 12" x 9.5" x 5.5" |
Product Weight | 8.5 lbs |
Included Items | Battery pack| AC mains charger| Car battery adapter cable |
California Residents |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
MANUALS |
---|
PowerTank v12 Power Supply Manual |
$ 184.95 - Épuisé
Celestron SKU: 18777 | Helix SKU: CT18777
Take your telescope anywhere with this portable, rechargeable power supply. Enjoy extended observing and imaging sessions worry-free with 17 amp-hours of power in one convenient package. Use the included removable red flashlight while your eyes are dark-adapted to find accessories and reference star charts. When your session is over, the powerful LED spotlight illuminates your observing area so you can pack up quickly and safely, without leaving anything behind.
The extra large PowerTank 17 is more than just a telescope accessory; it’s also an essential assistant on your next outing. You can use PowerTank to charge drained electronic devices with a cigarette lighter adapter. PowerTank also comes with a built-in siren and AM/FM radio for emergencies.
Be prepared for stargazing and emergencies alike with PowerTank 17!
Will power any computerized mount
Battery Capacity | 204 Wh |
Charging Input | 15VDC @ 1500mA |
Charge Time (from flat) | 20 hours |
Telescope Power Port | No |
Car Battery Adapter Port | 12VDC @ 10A, Tip Positive |
USB Charging Port 1 Output | 5VDC @ 1.5A |
USB Charging Port 2 Output | 5VDC @ 1.5A |
Light Panel | White LED spotlight and red lensed LED flashlight |
Weatherproof/Dustproof | No |
Telescope Power Cord | 10 ft (3 m) long car battery adapter |
Strap | None |
Product Dimensions | 14" x 13" x 5.5" |
Product Weight | 17.5 lbs |
Included Items | Battery pack| AC mains charger| Car battery adapter cable |
$ 184.95 - Épuisé
Celestron SKU: 18771 | Helix SKU: CT18771
The PowerTank Lithium keeps the charge going for the astronomer on the go. The Lithium-Iron Phosphate (LiFePO4) battery chemistry has significant advantages over other battery chemistries.
- The LiFePO4 has an un-recharged shelf life of 10 years compared to 3 years for the Lithium Iron and 6-9 months for a Sealed Lead-Acid battery.
- The battery performance of the PowerTank Lithium phosphate degrades at a much slower pace than other chemistries.
- The LiFePO4 can be charged and discharged 2000 times compared to only 500 for a Lithium Iron battery and 300 for sealed lead-acid designs.
- The batteries will last as long as the telescope you use it with!
- The LiFePO4 uses phosphates instead of environmentally hazardous elements like cobalt or lead commonly found in other rechargeable batteries.
- Can withstand higher temperatures than lithium-iron designs and will not be a fire danger if accidentally punctured.
This combined with its rugged design make it the perfect outdoor power supply.
Keep your telescopes, smartphones, tablets, GPS systems, cameras and other USB-powered devices as active as you are with PowerTank Lithium—the ideal outdoor portable-charging solution for your electronic gear.
Specifications:
Battery Capacity | 86.4 Wh |
Charging Input | 16VDC @ 2000mA |
Charge Time (from flat) | 4 hours |
Telescope Power Port | 12VDC @ 3000mA, Tip positive |
Car Battery Adapter Port | None |
USB Charging Port 1 Output | 5VDC @ 1000mA |
USB Charging Port 2 Output | 5VDC @ 2100mA |
Auto Shutoff Threshold Current | (12V Port) - Less than 250mA for a long period of time |
Operating Temperature | -4°F - 140°F (-20°C - 60°C) |
Light Panel | Red or White with two brightness settings for each color |
Weatherproof/Dustproof | IP-65 rating |
Telescope Power Cord | 6.5 ft (2 m) with connector for Celestron telescopes |
Strap | 2" wide hook & loop strap for attachment to tripod leg & a 10" hanging strap |
Product Dimensions | 7.5" x 3" |
Product Weight | 2.25 lbs |
Included Items | Battery pack| AC mains charger| Power cord for Celestron telescopes| Strap for attaching to tripod| Strap for hanging |
$ 249.95 - Épuisé
Celestron SKU: 18768 | Helix SKU: CT18768
Overview
The PowerTank Lithium Pro is for the true power user! This higher capacity unit is the latest version of our bestselling powertank lithium>. PowerTank Lithium Pro offers twice the battery capacity of the original, making it ideal for more demanding applications.
PowerTank Lithium Pro features the right ports and connections to accommodate a variety of devices. You’ll find a 12V DC 5A telescope power port (Celestron cable included), a 12V DC 10A car battery adapter port, and two 5V DC USB ports - one 2.1 A and one that supports rapid charging.
The power pack’s extremely portable form factor means it can go anywhere from a remote dark sky location for astroimaging to a weekend of camping. When it’s powering your telescope, use the included 2” straps to secure the unit to your tripod leg where it is out of the way.
One side of the unit features a strip of LED lighting in both bright white and red. This turns the unit into a convenient safety light during star parties or a work lamp to clean up your observing area when the night is done. You can even use it as a bright emergency light during a power failure and illuminate an entire room of your home.
PowerTank Lithium Pro can also travel with you on your next vacation. At 158.72 Wh, it meets current FAA regulations (160Wh) from transportation in your carry-on baggage. Please check in advance with your airline to verify they do not have stricter policies.
Advantages of Celestron’s LiFePO4 Battery
Powered by Celestron's Lithium-Iron Phosphate (lifepo4) battery, PowerTank Lithium Pro is smaller, lighter, and safer than sealed lead acid batteries. The technology is also more environmentally-friendly since it does not use toxic heavy metals.
PowerTank Lithium Pro’s LiFePO4 chemistry holds up to 2000 charge cycles and has an un-recharged shelf life up to 10 years. That means you won’t have to remember to recharge your battery every few months like with a sealed lead acid battery. Its large, 17-hour capacity and lack of maintenance make PowerTank Lithium Pro the ideal choice for an emergency kit. Store one in your home, your garage, and even your office.
Specifications:
Battery Capacity: | 158.72 Wh |
Charging Input | 16VDC @ 2000mA |
Charge Time (from flat) | 6 hours |
Telescope Power Port | 12VDC @ 5000mA, Tip positive |
Car Battery Adapter Port | 12VDC @ 10A, Tip positive |
USB Charging Port 1 Output | 5VDC @ 2100mA |
USB Charging Port 2 Output | 5VDC Quick Charge |
Auto Shutoff Threshold Current | (Car Battery Port) - Less than 420mA for a long period of time |
Operating Temperature | -4°F - 140°F (-20°C - 60°C) |
Light Panel | Red or White with two brightness settings for each color |
Weatherproof/Dustproof | IP-65 rating |
Telescope Power Cord | 6.5 ft (2 m) with connector for Celestron telescopes |
Strap | 2” wide hook & loop strap for attachment to tripod leg |
Product Dimensions | 8.75" x 6" x 4" |
Product Weight | 4.5 lbs |
$ 99.95
$ 2.95
Ikelite Product Number 0171.63
$ 211.95
Norman SKU: 811954 | Helix SKU: NR811954
Now your Allure DP320 Monolight can be used anywhere, with the BP320 (811954) Battery Power Supply. Even in the most remote locations you can have professional studio light that is compatible with the entire line of Norman light modifiers.
A fully charged battery will support approximately 115 full power flashes. The built-in level indicator shows battery power status, with a red light to tell you when it needs to be charged again. The optional R4162 Adapter allows the BP320 to be conveniently mounted to a light stand.
Battery Type Battery Capacity Charge Requirement Battery Output Dimensions Weight |
Sealed lead acid 12 VDC, 2.3Ah 18VDC, 600MA 305VDC, 500MA 8.7" L, 4.3" W, 1.9" D 3 pounds |
$ 2,966.95
Norman SKU: 810815 | Helix SKU: NR810815
Commercial Photographers need lighting equipment that will provide the power, repeatability and versatility required to handle the endless variety of assignments they encounter on a daily basis. Norman Series 900 equipment has always been able to meet these challenges, and the D12 and D24 Digital Power Supplies are no exception.
These 1200 and 2400 watt-second systems incorporate four lamphead outlets with digital displays and individual on/off switching. Power levels are adjusted through two channels, each with a five-stop range that are adjustable in 1/10 stop increments. You can also combine the two channels to deliver full power to a single lamphead or to create a symmetrical power supply.
Compatible with all Series 900 Lampheads and related light modifiers
- Optional software for complete control from your PC
- Photo eye, 1/4" sync jack and optional PocketWizard™ Radio Receiver
- Accurate digital controls with LED display for each lamphead
- Easy to use rotary knobs control power settings and modeling light levels
- Selectable audible and visual flash verification
- Misfire alarm for each lamphead
- Flash repeatability of 1/20 stop at full power
- Slow charge option allows shooting at locations with sub-par wiring
- Full two year limited parts and labor warranty
- Independent safety approvals including ETL, CETL and FCC
1- LED Display: Displays the power in watt-seconds that has been set for that lamphead.
2- Power Switch: Switches AC power on/off. Internal memory retains settings.
3- AC Power Inlet: 115 volt 60HZ power input, stabilized to provide repeatibility of 1/20 stop at full power with AC line voltage fluctuations between 105-125 volts.
4- Reset 15 Amp Circuit Breaker: Automatically protects the flash circuit against excessive overloads.
5- Sync Outlets: Two sync outlets available for triggering from multiple cameras or meters.
6- Computer Control Modular Jack: Used to connect the power pack to a PC via serial port when using Norman Power Supply Communication Software.
7- Lamphead Enable: Allows a lamphead to be turned off without unplugging it.
8- Modeling Lamp: Can be set to full, ratio or off. Trim control brightens or dims without losing ratio.
9- Flash Verification: Audible verification will beep twice when the unit has returned to full power. Visual verification will cycle the modeling on and off, and then return to its previous state.
10- Combine: When the pack is in combine mode, all of the power in the power pack is distributed evenly to all lampheads that are enabled.
11- Photo Eye: Can be switched on to permit remote triggering from another flash source.
12- Slow Charge: When enabled the units recycle time is increased, which is useful when shooting at a location that has sub-par wiring.
13- Power Trim Knobs: Adjusts the flash output from full to -5 f/stops in 1/10 stop increments
14- Test Button/Ready Light: Press button to manually flash unit. Switch will light when ready to be triggered.
15- Antenna: For built-in PocketWizard™ Radio Receiver.
$ 3,154.95
Norman SKU: 810710 | Helix SKU: NR810710
Commercial Photographers need lighting equipment that will provide the power, repeatability and versatility required to handle the endless variety of assignments they encounter on a daily basis. Norman Series 900 equipment has always been able to meet these challenges, and the D12 and D24 Digital Power Supplies are no exception.
These 1200 and 2400 watt-second systems incorporate four lamphead outlets with digital displays and individual on/off switching. Power levels are adjusted through two channels, each with a five-stop range that are adjustable in 1/10 stop increments. You can also combine the two channels to deliver full power to a single lamphead or to create a symmetrical power supply.
Additional Features:
- Compatible with all Series 900 Lampheads and related light modifiers
- Optional software for complete control from your PC
- Photo eye, 1/4" sync jack and optional PocketWizard™ Radio Receiver
- Accurate digital controls with LED display for each lamphead
- Easy to use rotary knobs control power settings and modeling light levels
- Selectable audible and visual flash verification
- Misfire alarm for each lamphead
- Flash repeatability of 1/20 stop at full power
- Slow charge option allows shooting at locations with sub-par wiring
- Full two year limited parts and labor warranty
- Independent safety approvals including ETL, CETL and FCC
Norman Power Supplies are also available with built-in PocketWizard™ radio receivers. This unique feature allows these power supplies to be used in the studio or on location without the hassle of sync cords, and it eliminates the risk of inadvertent tripping of your lights from other strobes in the area. The built-in PocketWizard™ receiver can be set to operate from any channel selected on a compatible PocketWizard™ transmitter.
Having the PocketWizard™ receiver built into the D12R and D24R eliminates the need to carry and keep track of a seperate receiver module and compatible cable. Best of all, the built-in unit is powered directly from the power supply, eliminating the need for batteries.
1- LED Display: Displays the power in watt-seconds that has been set for that lamphead.
2- Power Switch: Switches AC power on/off. Internal memory retains settings.
3- AC Power Inlet: 115 volt 60HZ power input, stabilized to provide repeatibility of 1/20 stop at full power with AC line voltage fluctuations between 105-125 volts.
4- Reset 15 Amp Circuit Breaker: Automatically protects the flash circuit against excessive overloads.
5- Sync Outlets: Two sync outlets available for triggering from multiple cameras or meters.
6- Computer Control Modular Jack: Used to connect the power pack to a PC via serial port when using Norman Power Supply Communication Software.
7- Lamphead Enable: Allows a lamphead to be turned off without unplugging it.
8- Modeling Lamp: Can be set to full, ratio or off. Trim control brightens or dims without losing ratio.
9- Flash Verification: Audible verification will beep twice when the unit has returned to full power. Visual verification will cycle the modeling on and off, and then return to its previous state.
10- Combine: When the pack is in combine mode, all of the power in the power pack is distributed evenly to all lampheads that are enabled.
11- Photo Eye: Can be switched on to permit remote triggering from another flash source.
12- Slow Charge: When enabled the units recycle time is increased, which is useful when shooting at a location that has sub-par wiring.
13- Power Trim Knobs: Adjusts the flash output from full to -5 f/stops in 1/10 stop increments
14- Test Button/Ready Light: Press button to manually flash unit. Switch will light when ready to be triggered.
15- Antenna: For built-in PocketWizard™ Radio Receiver.
SPECIFICATIONS |
D12 / D12R |
Power | 1200 watt-seconds |
Power Control | Full to –5 f/stops |
Recycle Time at Full Power | 2.0 seconds |
Flash Duration | 1/1600 second (full) |
Guide Number* | 220 @10’, ISO 100 |
Sync Trigger | Photo eye, 1/4" sync jack |
Optional Sync Trigger | Built-in PocketWizard™ |
Sync Voltage | 6 VDC |
Flashtube | Quartz |
Modeling Lamp Control | Off, ratio, full and trim |
Supply Voltage | 105-125 VAC, 60HZ |
Consumption | 15A |
Voltage Stabilization | +/- 1% |
Overload Protection | 15A circuit breaker |
Dimensions | 7.5" X 7.4" X 11.7" |
Weight | 12.3 pounds |
$ 2,168.95
The Original FlashMaster is a 800ws unit with 5 outlet heads, 4 with low voltage 1 high voltage. The most notable thing about the FlashMaster Power Supply is that it uses a unique "ratio-plug" system. This will result in a different pre-set level of power to each lamphead. The rugged construction provides durability whether you're on the go or in the studio. The FlashMaster power distribution system with up to four light capacity provides all the light you will need. Over 80 Quick-Change accessories make modifications a snap.