$ 299.00 - Épuisé
Rode SKU: Stereo Video Mic Pro-R | Helix SKU: RMStereoVideoMicProR
The new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.
Based around the all new capsule with its matched pair of high sensitivity ½”cardioid condensers in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.
Another new addition is the integrated Rycote® Lyre® based shock mounting system, which separates the Stereo VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
The Stereo VideoMic Pro, with its ergonomic form factor, make it perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The newly designed Kevlar reinforced braided cable, as well as the improved foam windscreen, provides excellent acoustic decoupling from the camera and offers significantly lower noise transference and higher sensitivity.
The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.
A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.
Like the VideoMic Pro, the Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
The RØDE Stereo VideoMic Pro is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter |
Capsule | 0.50" |
Address Type | End |
Frequency Range | 40Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 134dBSPL |
Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 18dBA |
Weight | 116g |
Dimensions | 134mmH x 80mmW x 115mmD |
Warranty | 1 year with free extension to 10 years following registration |
$ 599.00 - Épuisé
Rode SKU: SVMX | Helix SKU: RMSVMX
The Stereo VideoMic X is the ultimate broadcast-grade stereo microphone for on-camera use. Utilising all-metal construction, it is incredibly robust making it ideal for regular professional use, while also providing high levels of resistance to RF interference. The mic features a matched pair of ½” true-condenser capsules, configured in a stacked X-Y configuration, providing a highly-immersive soundscape. Each capsule is supported by the Rycote® Lyre® shock-mounting system, providing isolation from vibration as well as knocks and bumps. Digital switching on the rear of the SVMX allows the user to control the level adjustment (-10dB or +20dB), high-pass filter (0/75/150Hz) and an innovative high-frequency boost (+6dB @ XHz) designed to boost the intelligibility of dialogue. In a first for the VideoMic range, professional-grade balanced outputs are available on the side of the body, in addition to the RF shielded 3.5mm stereo output cable. An outer dome structure provides physical protection for the sensitive capsules, while reducing wind noise in the same manner as RØDE’s RedDot-winning Blimp.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter |
Capsule | 0.50" |
Polar Pattern | |
Address Type | End |
Frequency Range | 40Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Sensitivity | -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 12dB-A |
Power Options | |
Weight | 300gm |
Dimensions | 102mmH x 118mmW x 100mmD |
Output | |
Warranty | 1 year with free extension to 10 years following registration |
$ 159.99
Sony SKU: ECM-XYST1M | Helix SKU: SYECMXYST1M
FDR-AX700/FDR-AX53/HDR-CX455/HDR-CX675/FDR-AX33/HDR-PJ670/FDR-AX100/HDR-CX900/HDR-PJ540/HDR-PJ810/HDR-MV1/HDR-CX380/HDR-CX430V/HDR-PJ380/HDR-PJ430V/HDR-PJ650V/HDR-PJ790V/HDR-TD30V/HDR-CX260V/HDR-CX580V/HDR-CX760V/HDR-PJ260V/HDR-PJ580V/HDR-PJ710V/HDR-PJ760V/HDR-TD20V/HDR-XR260V/HDR-CX160/HDR-CX360V/HDR-CX560V/HDR-CX700V/HDR-PJ10/HDR-PJ30V/HDR-PJ50V/HDR-TD10/HDR-XR160/HDR-CX550V/HDR-XR550V/HDR-XR500V/HDR-XR520V/HDR-FX1000/HDR-FX7/HDR-HC7/HDR-SR1/HDR-SR11/HDR-SR12/HDR-SR8/HDR-UX1/HDR-UX7/NEX-VG30/NEX-VG30H/NEX-VG900/NEX-VG20/NEX-VG20H/NEX-VG10/DEV-50V/DEV-3/DEV-5/DSC-RX0/DSC-RX10M4/DSC-RX10M3/DSC-RX1RM2/DSC-RX10M2/DSC-HX400V/DSC-HX60V/DSC-RX10/DSC-RX100M2/DSC-RX1R/DSC-HX50V/ILCA-99M2/ILCA-68/ILCA-68K/ILCA-77M2/ILCA-77M2M/ILCA-77M2Q/SLT-A58K/SLT-A99/SLT-A99V/SLT-A37/SLT-A57/SLT-A57K/SLT-A65V/SLT-A65VK/SLT-A65VL/SLT-A77V/SLT-A35/SLT-A35K/DSLR-A560/DSLR-A560L/DSLR-A580/SLT-A33/SLT-A33L/SLT-A55V/ILCE-6400/ILCE-6400L/ILCE-6400M/ILCE-7M3/ILCE-7M3K/ILCE-7RM3/ILCE-9/ILCE-6500/ILCE-6500M/ILCE-6300/ILCE-6300L/ILCE-6300M/ILCE-7SM2/ILCE-7RM2/ILCE-7M2/ILCE-7M2K/ILCE-7S/ILCE-6000/ILCE-6000L/ILCE-6000Y/ILCE-3500J/ILCE-3000K/ILCE-7/ILCE-7K/ILCE-7R/NEX-6/NEX-7/NEX-7K