The Universal Holder A attaches to stands that have a 5/8” stud. It enables the adjusting of pan and tilt for a light and most importantly it has a receiver for holding an umbrella. The Holder has one 5/8” female receiver on the top and bottom. The bottom female receiver can be used either vertically or horizontally, whether being mounted vertically on a stud or horizontally on the arm of a c-stand.
F&V Sony NP-F to Panasonic D28S Converter Plate 102020130101
$ 17.00
F&V Sony NP-F to Panasonic D28S Converter Plate 102020130101
$ 17.00
F&V Sony NP-F to Panasonic D28S Converter Plate 102020130101
The Sony to Panasonic Battery Converter Plate allows you use your Panasonic batteries with your Sony NP-F battery plate. One side of the converter plate mounts directly on to your Sony battery plate as if it was a battery, and the other side offers a mounting area for a Panasonic Battery.
This product can be used with the following F&V Products:
| Highlights |
Use Your Panasonic D28S Battery on Your Sony NP-F Devices such as the Z96 and Z-Flash |
|---|---|
| Specs |
Nominal Dimensions: 7 x 4 x 2.5 (cm) Nominal Weight: 0 lb 1 oz Voltage: DC7.2V – DC12V |
F&V Speed Crank for Follow Focus 33601078
$ 25.00 - Épuisé
F&V Speed Crank for Follow Focus 33601078
$ 25.00 - Épuisé
F&V Speed Crank for Follow Focus 33601078
The Speed Crank is used in conjunction with a follow focus to allow for easier handling and longer turns of the focus knob. The Speed Crank fits into the speed crank port on the focus knob.
Highlights: Easier Handling for Longer Rotations of Focus Knob
Specs: Aluminum construction
Package Contents: (1) x Speed Crank
F&V Spider Steady Rig for DSLR Video
$ 49.95 - Épuisé
F&V Spider Steady Rig for DSLR Video
$ 49.95 - Épuisé
F&V Spider Steady Rig for DSLR Video
- The F&V Spider Steady DSLR Rig is a foldable rig that can take many different shapes for many different shot requirements.
- Whether you need to shoot off of your shoulder or low to the ground, this DSLR video stabilizer can transform from a standard shoulder rig to a low-mode rig with a top handle.
- The Spider Steady also features two (2) ¼"-20 female accessory thread-ins that allow you to mount lights and/or a monitor.
- The Spider Steady is adaptable for what the shot requires, and its ability to fold-up into a small size allows you to take it anywhere as it easily fits in any kit bag.
F&V T-4 LED Video Light 118110060101
$ 329.00
F&V T-4 LED Video Light 118110060101
$ 329.00
F&V T-4 LED Video Light 118110060101
The T-4 features four (4), daylight-balanced Power LEDs that deliver up to 960 lx of illumination, and is dimmable from 25-100%.
The T-4 has three (3) different types of interchangeable battery plates that simply snap on and off the back of the light unit. Choose from three (3) battery plate options: Sony NP-F, Canon BP930, or Panasonic D28S. The T-4 can also be powered from an external power supply through its DCΦ2.5 jack.
This light also features a unique barn door system. The barn door system is composed of two (2) barn doors that act as flags to shape your light and two (2) swing-away filters, one (1) tungsten filter and one (1) diffusion filter. Whether shooting indoors, outdoors, or in tight quarters, the T-4 offers solutions for adjusting the quality of your light as needed.
This light has a standard cold shoe mount that has an integrated 1/4"-20 female thread. The addition of the 1/4"-20 female thread allows for the attachment of mounting accessories such as a Baby Pin, Spigot, or Hand Grip.
| Highlights |
|
|---|---|
| Specs |
Bulb: Power LED (4 bulbs) Light Angle: 60° Illuminance: 960 lx Power Variation: 25-100% Color Rending Index (Ra): ≥ 85% Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter) Power Sources: DV Battery Plate / DCΦ2.5 jack Operating Voltage: 9.8-16.8V DC Battery Mount: Interchangeable T-4 Battery Adapter Plates: Sony NP-F, Canon BP930, or Panasonic D28S Battery Life: 36mins with NP-F550 Shoe Type: Standard Cold Shoe w/ integrated 1/4"-20 female thread Nominal Weight: 13 oz / 369 g (excluding weight) Nominal Dimensions: 13.5 x 12 x 8.2 (cm) (with battery plate) |
| Package Contents |
(1) x T-4 LED Video Light -11812161 (1) x D-tap Male to DCΦ2.5 Plug - 20" - 10206002 (1) x 4-pin XLR Male to DCΦ2.5 Plug - 10206001 (1) x T-4 Battery Adapter Plate – Sony NP-F - 10208005 (S) (1) x Wide Angle Diffuser - 33212010 |
| Feature Tags | 500+ lx, 5600K, NP-F Powered, DC Powered, Multiple Power Options |
F&V Twins Digi 20 LED Light
$ 79.99
F&V Twins Digi 20 LED Light
$ 79.99
F&V Twins Digi 20 LED Light
F&V SKU: Digi 20 | Helix SKU: FVDIGI20
Overview
High brightness, lightweight and durable
Can be powered by F-550, F750, F970 lithium batteries
Suitable for all kinds of digital cameras and Sony DVR
Single lamp and dual lamp adjustable
F-750 battery can power it for 80 minutes
Constant current design
Stable light illumination design
F&V Two Light Bracket for Z180 102010230000
$ 25.00
F&V Two Light Bracket for Z180 102010230000
$ 25.00
F&V Two Light Bracket for Z180 102010230000
The Two Light Bracket has two (2) ¼"-20 male threads for mounting two (2) Z180 lights side by side. It also features a ¼"-20 and 3/8"-16 female thread in the center of the bracket for the ability to mount the bracket on multiple types of light support.
| Highlights |
|
|---|---|
| Package Contents | (x1) - Two Light Bracket for Z180 |
F&V Two Light Bracket for Z96 102010090101
$ 25.00
F&V Two Light Bracket for Z96 102010090101
$ 25.00
F&V Two Light Bracket for Z96 102010090101
The Two Light Bracket has two (2) ¼"-20 male threads for mounting two (2) lights side by side. It also features a ¼"-20 female thread in the center of the bracket for the ability to mount the bracket on multiple types of light support.
Highlights
- Two(2) 1/4"-20 male threads for the mounting of lights
- 1/4" female thread in the center of the bracket
F&V Ultracolor Z200S Soft Bi-color Half-Panel LED Light with AC Adapter (V-Mount)
$ 489.99
F&V Ultracolor Z200S Soft Bi-color Half-Panel LED Light with AC Adapter (V-Mount)
$ 489.99
F&V Ultracolor Z200S Soft Bi-color Half-Panel LED Light with AC Adapter (V-Mount)
F&V SKU: 18030000 | Helix SKU: FV18030000
Overview
UltraColor is now also UltraSoft
The UltraColor Z200S is the newest member of the F&V Soft panel series that combines bi-color, TLCI 99, brightness, compactness and that is passively cooled and super soft in a small, half-panel format.
Brightness | up to 2200 Lux@1m
The Z400S Soft and the optional intensifier are the perfect team when a powerful soft light is needed. With 901 lux @ 1m and with a beam angle of 130°, the Z400S Soft is already a very bright light. The intensifier concentrates the light into a 50° beam angle, increasing the brightness to an incredible 2200 lux @ 1m (5600K).
Colors as they should be
The UltraColor Soft series offers true color reproduction throughout the complete color temperature range. Rendered with absolute precision, skin tones and colors never looked better. CRI and TLCI measurements only give a small insight into how LED lights render the full spectrum, the UltraColor Soft series can shine beyond those values with a well balanced color response - creating beautiful images. Pure white light with a TLCI of up to 99.
True Softness - Single, Soft & Clean Shadow
The quality of a light is not only defined by its color and brightness, but also how it renders shadows. With a clean, single shadow that wraps nicely around subjects, the UltraColor Soft delivers stunning results. No stepped shadows, no uneven color, just pure soft light.
Specifications
| Barcode | 6949773304523 |
|---|---|
| Manufacturer | F&V |
| Country of Manufacture | China |
| Illuminance | 100% 5600K: 901 lux @1m, 226 lux @2m, 101 lux @3m; 100% 3200K: 796 lux @1m, 199 lux @2m, 89 lux @3m |
| Color Temperature (CCT) | Bi-Color 3200 - 5600K (+/- 200K) |
| Beam Angle | 130 Degrees |
| Color Rendition | TLCI 97 - 99, CRI 96 - 98 |
| Dimming | 0-100% Continuous |
| Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
| Thermal Design | Silent Passive Cooling |
| Power Options | AC Adapter |
| Power Consumption | N/A |
| Power Voltage | 12 - 24 V DC |
| Battery Lifetime | N/A |
| Mounting Options | Yoke with 5/8" Mount |
| Package Contents |
(1x) Z200S Soft UltraColor Light (1x) AC Adapter |
F&V Universal Holder A 102050040101
$ 17.00
F&V Universal Holder A 102050040101
$ 17.00
F&V Universal Holder A 102050040101
F&V V-mount AC Power Adapter 102021050111
$ 99.00 - Épuisé
F&V V-mount AC Power Adapter 102021050111
$ 99.00 - Épuisé
F&V V-mount AC Power Adapter 102021050111
The V-Mount AC Power Adapter attaches onto a V-Mount Battery Plate. The power adapter plugs into a regular power socket and allows for a continuous power feed to your V-Mount battery plate.
The V-Mount AC Power Adapter can be used on the F&V V-Mount Battery System or on a K4000 LED Studio Panel. The V-mount Battery Plate comes standard on the K4000 LED Studio Panel.
The V-mount AC Power Adapter is currently not available for customers located in Canada.
Highlights:
- Continuous Power Feed to Battery Plate
- Ideal for Shooting in Studio
Operating Voltage: Input: AC100-240V / Output: DC15V
Battery Mount/Connection Type: V-Mount
Dimensions: 14×9.5×4.5cm
Weight: 312g
Package Contents
(1) x V-Mount AC Power Adapter
F&V V-Mount Battery System - Kit 102021010101
$ 249.00 - Épuisé
F&V V-Mount Battery System - Kit 102021010101
$ 249.00 - Épuisé
F&V V-Mount Battery System - Kit 102021010101
The V-Mount Battery System accepts all standard v-mount batteries. It mounts onto standard 15mm rods and features four (4) female D-tap connections: DC5V, DC8V, DC12V, and DC14.4V. Whether you need to power an on-camera light, a monitor, or an onboard accessory, this V-Mount Battery System will feed your accessories power for an extended period of time.
The battery system is also capable of tilting up and down, allowing for a configuration that meets the needs of your camera rig set-up.
Highlights
- Four (4) D-tap Outputs
- Adjustable Tilt of Battery Plate
- Fits onto 15mm Rods
Power Outputs: Four (4) D-tap outputs: DC5V, DC8V, DC12V, 14.4V
Operating Voltage: DC16V
Battery Mount/Connection Type: V-mount
Nominal Dimensions: 16.5 x 10 x 9.5 (cm)
Nominal Weight: 12 oz / 340 g
Package Contents(1) x V-mount Battery System
(3) x D-tap Male to DCΦ2.5 Female - 20" - 10206002;
(1) x Female DCΦ2.5 to Canon LP-E6- 10208007;
F&V V-mount Battery System with HDMI Splitter - Kit 102021020101
$ 299.00 - Épuisé
F&V V-mount Battery System with HDMI Splitter - Kit 102021020101
$ 299.00 - Épuisé
F&V V-mount Battery System with HDMI Splitter - Kit 102021020101
The V-Mount Battery System with HDMI Splitter accepts all standard v-mount batteries. It mounts onto standard 15mm rods and features four (4) female D-tap connections: DC5V, DC8V, DC12V, and DC14.4V. Whether you need to power an on-camera light, a monitor, or an onboard accessory, this V-Mount Battery System will feed your accessories’ power for an extended period of time.
As well as supplying additional power outputs, this system also contains a built-in HDMI splitter. A single female HDMI input, outputs two (2) female HDMI outputs
The battery system is also capable of tilting up and down, allowing for a configuration that meets the needs of your camera rig set-up.
| Highlights |
Four (4) D-tap Outputs
Two (2) HDMI Outputs
Adjustable Tilt of Battery Plate
Fits onto 15mm Rods
|
|---|---|
| Specs |
Power Outputs: Four (4) D-tap outputs: DC5V, DC8V, DC12V, 14.4V Operating Voltage: DC16V Battery Mount/Connection Type: V-mount HDMI Input: Female (Type A) HDMI HDMI Output: Two (2) Female (Type A) HDMI Nominal Dimensions: 16.5 x 10 x 9.5 (cm) Nominal Weight: 12 oz / 340 g
|
| Package Contents |
(1) x V-mount Battery System (3) x D-tap Male to DCΦ2.5 Female - 20" - 10206002; (1) x Female DCΦ2.5 to Canon LP-E6- 10208007; |
F&V V-mount Plate 102021070101
$ 29.00
F&V V-mount Plate 102021070101
$ 29.00
F&V V-mount Plate 102021070101
The V-Mount Battery Plate allows you to change a 3-stud Battery Plate to that of a V-Mount Battery Plate on your F&V X-Series Lights or 3-Stud Battery System. Unscrew the four (4) screws located on the top of the current battery plate, allowing access to change your battery plate to a V-Mount Battery Plate.
| Highlights |
Change a 3-stud Battery Plate to a V-mount Battery Plate |
|---|---|
| Specs |
Operating Voltage: 16V Battery Mount/Connection Type: V-mount Dimensions: 14 x 8.25 x 1.27 (cm) Weight: 72 (g) |
| Package Contents |
(1) x V-mount Battery Plate - 10208006; |
F&V WiFi Module for R720 109111050001
$ 99.00
F&V WiFi Module for R720 109111050001
$ 99.00
F&V WiFi Module for R720 109111050001
Control your R720 LED Ring Light wirelessly via your cell phone or the dedicate F&V 2.4 G Wireless Dimmer.
| Highlights | - Control your R720 LED Ring Light wirelessly via your cell phone or the dedicate F&V 2.4 G Wireless Dimmer. |
|---|---|
| Package Contents | (1x) WiFi Module for R720 LED Ring Light |
F&V Wired Dimmer - 90" : K4000/K4000S
$ 49.00
F&V Wired Dimmer - 90" : K4000/K4000S
$ 49.00
F&V Wired Dimmer - 90" : K4000/K4000S
F&V SKU: 10911010 | Helix SKU: FV10911010
Overview
This wired dimmer allows you to control the intensity on the F&V LED Panel Lights that have a serial port on the back. The cable length is 90" allowing the user to be more than 7 feet away from the light.
F&V Wired Dimmer - 90" : K4000/K4000S 10904004
$ 89.00 - Épuisé
F&V Wired Dimmer - 90" : K4000/K4000S 10904004
$ 89.00 - Épuisé
F&V Wired Dimmer - 90" : K4000/K4000S 10904004
The F&V Lighting Wired Remote Dimmer is compatible for K4000 and K4000S LED. It control both your light output intensity and CCT (Correlated Color Temperature - K4000S) remotely with the 90" Wired Dimmer.
F&V WR-1 Wifi Wireless Router for Smartphone App Compatibility
$ 129.00
F&V WR-1 Wifi Wireless Router for Smartphone App Compatibility
$ 129.00
F&V WR-1 Wifi Wireless Router for Smartphone App Compatibility
F&V SKU: 18098600 | Helix SKU: FV18098600
Overview
NEW WIRELESS CONNECTIVITY FOR WIFI ENABLED LIGHTS
The WR-1 Wireless Router creates a Wifi hotspot to allow users to control Wifi enabled F&V lights with the smart phone app. The app can control the intensity of the lights and on the bi-color lights it can control the color temperature. The app also allows you to save pre-sets lighting groups so you can quickly recall the settings.
HIGH TRANSMISSION POWER FOR MAXIMUM REACH
With two antennas and a strong built-in battery, the WR-1 offers unparalleled transmission power and can control F&V panels up to 30m away from the router.
COMPACT AND RUGGED
Protected by an aluminum housing, the WR-1 is rugged and lightweight. With the compact housing the WR-1 never gets in the way.
MULTIPLE MOUNTING OPTIONS
With the included lanyard you can easily carry the WR-1 around your neck so that it is always in close proximity to your modbile device. If you don't want to carry the router around, you can attach it with its built-in magnet to any magnetic surface such as the back of a F&V panel. The lanyard mount can also be removed to reveal a 1/4"-20 female thread as an additional mounting option.
BUILT-IN BATTERY & USB POWER
The built-in lithium-ion battery lasts up to 20 hours and can easily be recharded with the included USB cable. In a fixed environment the WR-1 can be permanently powered via the USB port.
COMPATIBILITY
The WR-1 is compatible with the Z720S and also with any panel light that has the Wifi Module installed.
IOS & ANDROID APP
The easiest way to find the app is by scanning the following QR codes with your iOS or Android mobile phone. To use the Wireless Router turn on the lights and the WR-1. On your smartphone or tablet connect to the Wifi hotspot called F&V_WIFI_2.4G and enter the password found in the manual. Once connected you can start up the app to control the lights.
IOS
ANDROID
WHY CAN’T YOU CONTROL PANELS WITH THE WIFI MODULE DIRECTLY WITH THE F&V APP?
Phones have very limited transmission power because of small integrated antennas and the power fort he antenna is limited to reserve power for other tasks. To provide more reliable control of Wifi enabled lights, F&V has developed the Wifi Wireless Router with long range antennas.
F&V Z1200S UltraColor Bi-Color LED Studio Panel 2-Light Kit (V-Mount)
$ 2,199.00
$ 499.99
Solde
F&V Z1200S UltraColor Bi-Color LED Studio Panel 2-Light Kit (V-Mount)
$ 2,199.00 $ 499.99
F&V Z1200S UltraColor Bi-Color LED Studio Panel 2-Light Kit (V-Mount)
F&V SKU: 109030080231 | Helix SKU: FV109030080231
Overview
The Z1200 UltraColor utilizes the highly accurate F&V UltraColor LED. The F&V Z1200S Bi-Color LED Light Panel Kit has an exceedingly accurate color temperature and has a color rendering index of 95. With the UltraColor LED, F&V guarantees that each LED panel will vary no more than ±100K in color temperature as well as no more than ±1.0 in CRI. The UltraColor LED is the perfect LED for professional shooters and studios that need, without exception, maximum consistency. At a 60° beam angle, 1200 LEDs produce a rich, extremely bright beam of light which is perfect for high precision shoots in the studio or on location. The F&V Z1200S Bi-Color LED Light Panel Kit has the same brightness as three (3) K4000 or Z400 LED panels.
The F&V Z1200S Bi-Color LED Light Panel Kit comes packaged with the noteworthy Milk Diffusion Filter which creates a soft, glamorous light. The Milk Diffusion Filter now utilizes a snap-in, quick-release mounting system. This new mounting system will work in unison with additional accessories, giving users the ability to stack modifiers on top of one another. This secure mounting system allows the light to be rigged sideways or upside down without the possibility of accessories falling or sliding out.
The F&V Z1200S Bi-Color LED Light Panel Kit has an expansion port which allows for installation of the SmartSync Control Circuit (SCC) as well as a DMX512 Module. The SCC module allows you to daisy chain multiple units together via CAT5 cables. When chained together, any light modified in the chain will cause all the other lights to dim in unison. The DMX512 Module allows for control of the lights with standard DMX512 dimmer boards.
Package Contents:
(2) x Z1200 LED Studio Panels
(2) x Milk Diffusion Filter
(8) x Quick Release Rods for Milk Diffusion Filter
(2) x AC Power Adapter
(2) x Power Cable
(4) x Replacment Fuses
(1) x New K8000/Z1200 Carry Case with Wheels
*Light stands NOT included
Specifications
| Bulb: | UltraColor LED |
| LED Count: | 1200 |
| Beam Angle: |
60° |
| Power Variation: | 0-100% (Stepless) |
| Color Rendering Index (Ra): | ≥ 95 ±1.0 |
| Correlated Color Temperature (CCT): | 3200K~5600K ±100K (Bi-color Model) |
| Operating Voltage: | 10-18V DC |
| Nominal Weight: | 8 lb 4 oz / 3.74 kg (excluding AC adapter and batteries) |
| Nominal Size (L x W x H): | 61 x 37.5 x 8 cm (at widest parts, including yoke) |
| Power Options: | Built-in V-mount, AC Power Adapter (AC operation of 90-265VAC 50/60Hz) |
| Power Draw: | 96W |
| Max Current: | 9.6A |
F&V Z180 UltraColor Daylight 5600K LED Video Light
$ 349.00
$ 34.99
Solde
F&V Z180 UltraColor Daylight 5600K LED Video Light
$ 349.00 $ 34.99
F&V Z180 UltraColor Daylight 5600K LED Video Light
F&V SKU: 118123140201 | Helix SKU: FV118123140201
Overview
The Z180 UltraColor 5600K LED Light Panel features 180 daylight-balanced LEDs with a CRI 95. This Z180 UltraColor delivers a bright yet soft, pure-color beam of 1460lx light output. The new, 95 CRI LEDs place the F&V product line at the forefront of technology in the market for LEDs. The high CRI LEDs allow for rich, precise color rendering and flexibility across the wide array of digital video sensors on the market today. By having a high CRI, the Z180's light quality will be perceived in a similar fashion across all sensors with no discernable difference. The high CRI LEDs also offer great color blending when using natural light sources such as daylight or tungsten filaments.
Multiple Z180 units can be linked together via its Expandable Link System, a dovetail attachment system. The lights can mount horizontally or vertically to one another. This linking system makes it easier to transport your lights and is a perfect solution for projects on-location, where carrying large sized lights becomes impractical. When the lights are linked together, the SmartSync Control Circuit allows you to control the intensity of all lights with only one of the light’s dimmer knobs. When the knob of the parent-light is adjusted, all connected lights match the intensity of the parent-light. The versatility of this light will make it a necessity to have in your lighting kit. This light is compact in size allowing for it to fit into small areas, yet with its Expandable Link System, this light can be both big and small.
This light comes with two (2) magnetic filters: one (1) tungsten filter that balances your light to 3200K and one (1) diffusion filter. This light is dimmable from 0-100%. This light has several powering options. It can be powered by its built-in battery plate with a Sony NP-F type battery, by its built in battery compartment with six (6) AA-batteries, or by an external power source via its DCΦ2.5 jack.
Specifications
Bulb: UltraColor LED
LED Count: 180
Light Beam Angle: 65°
Illuminance: 1460 lx
Power Variation: 0-100%
Color Rending Index (Ra): ≥ 95
Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter)
Operating Voltage: DC 5.8-16.8V
Power Options: Built-in Sony NP-F Battery Plate, 6x AA Batteries, or DCΦ2.5 jack.
Lasting Time: 60mins with NP-F550, 37mins with AA Battery
Mounting: ¼"-20 Female Thread; Kai Arm included in kit
Nominal Weight: 1 lb 1 oz / 482 g (without filters)
Nominal Dimensions: 17.3 x 11.3 x5 (cm)
Package Content:
(1) x Z180 UltraColor Daylight LED Light Panel
(1) x Kai Arm - 10209007
(1) x Z180 Magnetic Tungsten Filter - 33212621
(1) x Z180 Magnetic Diffusion Filter - 33212622
(1) x Operation Manual
(1) x Warranty Card
F&V Z180S UltraColor Bi-Color LED Video Light
$ 369.00
$ 34.99
Solde
F&V Z180S UltraColor Bi-Color LED Video Light
$ 369.00 $ 34.99
F&V Z180S UltraColor Bi-Color LED Video Light
F&V SKU: 118123150201 : Helix SKU: FV118123150201
Overview
The Z180S UltraColor Bi-Color LED Light Panel features 180 LEDs with a CRI 95. Of the 180 LEDs, 90 LEDs are daylight-balance and 90 LEDs are tungsten balanced. The Z180S Bi-Color UltraColor delivers a bright yet soft beam of 1380lx light output. The new, 95 CRI LEDs place the F&V product line at the forefront of technology in the market for LEDs. The high CRI LEDs allow for rich, precise color rendering and flexibility across the wide array of digital video sensors on the market today. By having a high CRI, the Z180S's light quality will be perceived in a similar fashion across all sensors with no discernable difference. The high CRI LEDs also offer great color blending when using natural light sources such as daylight or tungsten filaments.
The Z180S has both a designated intensity dimmer knob and a designated CCT knob. Control the color temperature of this light by turning the CCT knob to the left or right. The color temperature of the light will transition smoothly from tungsten to daylight balanced light. The intensity dimmer knob controls the intensity of the light from 0-100%.
Multiple Z180S units can be linked together via its Expandable Link System, a dovetail attachment system. The lights can mount horizontally or vertically to one another. This linking system makes it easier to transport your lights and is a perfect solution for projects on-location, where carrying large sized lights becomes impractical. When the lights are linked together, the SmartSync Control Circuit allows you to control the intensity and CCT of all lights with only one of the light’s dimmer knobs. When the knob of the parent-light is adjusted, all connected lights match the intensity of the parent-light. The versatility of this light will make it a necessity to have in your lighting kit. This light is compact in size allowing for it to fit into small areas, yet with its Expandable Link System, this light can be both big and small.
This light comes with one magnetic Frost diffusion filter. This light is dimmable from 0-100%. This light has several powering options. It can be powered by its built-in battery plate with a Sony NP-F type battery, by its built in battery compartment with six (6) AA-batteries, or by an external power source via its DCΦ2.5 jack.
Highlights
- 95 CRI
- Bi-color: Variable from 3200K to 5600K
- Illuminance: 1380 lx
- Multiple Power Options
- Dimmable: 0-100%
- Expandable Link System
- SmartSync Control Circuit
Specifications
Bulb: UltraColor LED
LED Count: 180
Light Beam Angle: 65°
Illuminance: 1380 lx At Full Blend
Power Variation: 0-100%
Color Rending Index (Ra): ≥ 95
Correlated Color Temperature (CCT): Variable CCT. Blend from 3200K to 5600K
Operating Voltage: DC 5.8-16.8V
Power Options: Built-in Sony NP-F Battery Plate, 6x AA Batteries, or DCΦ2.5 jack.
Lasting Time: 60mins with NP-F550, 37mins with AA Battery
Mounting: ¼"-20 Female Thread; Kai Arm included in kit
Nominal Weight: 1 lb 1 oz / 482 g (without filters)
Nominal Dimensions: 17.3 x 11.3 x 5 (cm)
Package Contents:
(1) x Z180S Bi-Color LED Light Panel
(1) x Kai Arm
(1) x Z180 Magnetic Diffusion Filter
(1) x Operation Manual
(1) x Warranty Card
Feature Tags:
1000+ lx, 5600K, 3200K, Bi-Color, Magnetic Filters, AA Powered, NP-F Powered, DC Powered, Multiple Power Options, Expandable, SmartSync
F&V Z400S UltraColor Bi-color LED Studio Panel (V-mount) 109030040231
$ 819.00
$ 149.99
Solde
F&V Z400S UltraColor Bi-color LED Studio Panel (V-mount) 109030040231
$ 819.00 $ 149.99
F&V Z400S UltraColor Bi-color LED Studio Panel (V-Mount)
F&V SKU: 109030040231 | Helix SKU: FV109030040231
Overview
The Z400 UltraColor utilizes the highly accurate F&V UltraColor LED. The F&V UltraColor LED has an exceedingly accurate color temperature and has a color rendering index of 95. With the UltraColor LED, F&V guarantees that each LED panel will vary no more than ±100K in color temperature as well as no more than ±1.0 in CRI. The UltraColor LED is the perfect LED for professional shooters and studios that need, without exception, maximum consistency. At a 60° beam angle, 400 LEDs produce a rich, bright, even beam of light which is perfect for high precision shoots in the studio or on location.
The Z400 UltraColor comes packaged with the noteworthy Milk Diffusion Filter which creates a soft, glamorous light. The Milk Diffusion Filter now utilizes a snap-in, quick-release mounting system. This new mounting system will work in unison with additional accessories, giving users the ability to stack modifiers on top of one another. This secure mounting system allows the light to be rigged sideways or upside down without the possibility of accessories falling or sliding out.
The Z400 UltraColor has an expansion port which allows for installation of the SmartSync Control Circuit (SCC) as well as a DMX512 Module. The SCC module allows you to daisy chain multiple units together via CAT5 cables. When chained together, any light modified in the chain will cause all the other lights to dim in unison. The DMX512 Module allows for control of the lights with standard DMX512 dimmer boards.
Specifications
Bulb: UltraColor LED
LED Count: 400
Beam Angle: 60°
Power Variation: 0-100% (Stepless)
Color Rendering Index (Ra): ≥ 95 ±1.0
Correlated Color Temperature (CCT): 5600K ±100K (Daylight Model) / 3200K~5600K ±100K (Bi-color Model)
Operating Voltage: 10-18V DC
Nominal Weight: 5 lb 1 oz / 2300 g (excluding AC adapter and batteries)
Nominal Size (L x W x H): 34.9 x 37.5 x 8.3 (cm)
Power Options: Built-in V-mount or Anton Bauer Battery Plate, AC Power Adapter (AC operation of 90-265VAC 50/60Hz)
Power Draw: 32W
Max Current: 3.2A
Package Contents:
(1) x Z400 Daylight LED Studio Panel
(1) x Milk Diffusion Filter
(4) x Quick Release Rods for Milk Diffusion Filter
(1) x V-Mount or Anton Bauer AC Power Adapter (Respective to customer selection)
(1) x Power Cable
(2) x Replacment Fuses
F&V Z720 UltraColor Daylight LED Ring Light
$ 949.00
$ 749.00
Solde
F&V Z720 UltraColor Daylight LED Ring Light
$ 949.00 $ 749.00
F&V Z720 UltraColor Daylight LED Ring Light
F&V SKU: 10903009 | Helix SKU: FV10903009
Overview
As part of the UltraColor series of LED lights, the Z720 is guaranteed to measure at a TLCI of 95 ± 1. This level of accuracy endows the user with confidence that all lights will perform at a professional level, day in and day out.
The Z720 has a 290mm center opening that allows it to be used with any size cinema lens. Mounting options for 15mm LWS and 19mm Studio ensure that the Z720 will seamlessly integrate into your professional, cinema work flow. A 5/8" mounting option allows you to attach the Z720 to a stand which is ideally suited for photographers.
Due to its large size, the Z720 not only creates gorgeous catchlights in the eyes of your talent, but also it wraps around their face with even, beautiful illumination. To further empower your creativity, the Z720 is broken into four quadrants, each of which can be controlled independently. The ability to uniquely modify the intensity and color temperature* of each quadrant allows you to make one of a kind catchlights with unparalleled ease.
Reap all the benefits the Z720 has to offer. When you're not in need of a ring light, the incredible power of the 720 LEDs allows you to use the light off camera as a standalone LED fixture. A soft box accessory allows you to shape and soften your light for a wide variety of applications. Additionally, the unit can be powered by two, NP-F Li-ion batteries which means you can take it anywhere you go.
Highlights:
290mm Center Opening
With a center opening of 290mm the benefit of the Z720's large form factor is two fold. Not only will the Z720 work with the largest cinema lenses, but also it will create large, beautiful catchlights in the eye of your subject.
TLCI 95 ± 1
The Z720 utilizes F&V's latest LED technology, the UltraColor LED. A precise coating technique and a meticulous review process ensures that UltraColor LED delivers accurate results every time. In fact, we guarantee it. Our UltraColor LED is rated at a TLCI 95 ± 1
Independent Quadrant Control
The Z720's circuitry is divided into four quadrants. This gives each quadrant independent control over intensity and CCT. Create distinctive catchlights with the press of a button.
WiFi Control
Wirelessly control your Z720 with your phone or the designated WiFi remote controller. Dial in both intensity and color temperature with precision everytime and save scenes for easy recall.
Battery Powered
The Z720 is the perfect companion on the road. The unit can be powered by two, small, NP-F Li-ion batteries.
19mm and 15mm Support
The Z720 was built with the professional cinematographer in mind. Industry standard mounting options will allow the Z720 to be used for productions both big and small.
Specifications
Specifications
Correlated Color Temperature: 5600K ±150K (Daylight Model) / 3200K~5600K ±150K (Bi-color Model) [Customer chooses model on product page]
Illumination (Lux@1m): Daylight Model: 3010 lx, Bi-color Model: 2746 lx (D:1505 lx, T:1241 lx)
Beam Angle: 60º
TLCI:95 ± 1.0
Color Rendering Index (Ra):95 ± 1.0
Power Variation: 0-100%
Power Supply: 2* Sony NP-F Battery Plate / DC2.5 Jack
Inside Diameter: 290mm
Item Includes
Package Contents
(1) x Z720 UltraColor LED Ring Light
(1) x Milk Diffusion Filter
(1) x Tungsten Filter (Daylight Model Only)
(1) x Frost Diffusion Filter
(1) x 15mm LWS / 19mm Studio 2-in-1 Rail Mount
(1) x 5/8" Mount
(1) x D-Tap Power Cable
(1) x AC Power Adapter
(1) x Carry Bag
F&V Z720S UltraColor Bi-color LED Ring Light
$ 999.00
$ 899.00
Solde
F&V Z720S UltraColor Bi-color LED Ring Light
$ 999.00 $ 899.00
F&V Z720S UltraColor Bi-color LED Ring Light
F&V SKU: 10903010 | Helix SKU: FV10903010
Overview
As part of the UltraColor series of LED lights, the Z720S UltraColor LED Ring Light is guaranteed to measure at a TLCI of 95 ± 1. This level of accuracy endows the user with confidence that all lights will perform at a professional level, day in and day out.
The Z720S UltraColor LED Ring Light has a 290mm center opening that allows it to be used with any size cinema lens. Mounting options for 15mm LWS and 19mm Studio ensure that the Z720 will seamlessly integrate into your professional, cinema work flow. A 5/8"""" mounting option allows you to attach the Z720 to a stand which is ideally suited for photographers.
Due to its large size, the Z720S UltraColor LED Ring Light not only creates gorgeous catchlights in the eyes of your talent, but also it wraps around their face with even, beautiful illumination. To further empower your creativity, the Z720 is broken into four quadrants, each of which can be controlled independently. The ability to uniquely modify the intensity and color temperature* of each quadrant allows you to make one of a kind catchlights with unparalleled ease.
Reap all the benefits the Z720S UltraColor LED Ring Light has to offer. When you're not in need of a ring light, the incredible power of the 720 LEDs allows you to use the light off camera as a standalone LED fixture. A soft box accessory allows you to shape and soften your light for a wide variety of applications. Additionally, the unit can be powered by two, NP-F Li-ion batteries which means you can take it anywhere you go.
Specifications
Correlated Color Temperature: 5600K ±150K (Daylight Model) / 3200K~5600K ±150K (Bi-color Model) [Customer chooses model on product page]
Illumination (Lux@1m): Daylight Model: 3010 lx, Bi-color Model: 2746 lx (D:1505 lx, T:1234 lx)
Beam Angle: 60º
TLCI:95 ± 1.0
Color Rendering Index (Ra):95 ± 1.0
Power Variation: 0-100%
Power Supply: 2* Sony NP-F Battery Plate / DC2.5 Jack
Inside Diameter: 290mm
Package Content:
(1) x Z720 UltraColor LED Ring Light(1) x Milk Diffusion Filter
(1) x Tungsten Filter (Daylight Model Only)
(1) x Frost Diffusion Filter
(1) x 15mm LWS Rail Mount
(1) x 19mm Studio Rail Mount
(1) x 5/8"" Mount
(1) x D-Tap Power Cable
(1) x AC Power Adapter
(1) x Carry Bag
Fantasea ES Fiber Optic Cable Kit (6240)
$ 31.95
Fantasea ES Fiber Optic Cable Kit (6240)
$ 31.95
Fantasea ES Fiber Optic Cable Kit (6240)
Fat Gecko Mini Camera and Camcorder Mount
$ 27.17
Fat Gecko Mini Camera and Camcorder Mount
$ 27.17
Fat Gecko Mini Camera and Camcorder Mount
FC-311/S Flashgun Cable (1.8 M)
$ 29.95
FC-311/S Flashgun Cable (1.8 M)
$ 29.95
Compatible Model: All Canon EOS cameras, digital or film, except for the 630 and RT cameras; Speedlites including Canon 580EX II,580EX,550EX,430EX II,430EX,380EX.
Female 1/4"-20 to Male 3/8"-16 Thread Adapter
$ 4.50
Female 1/4"-20 to Male 3/8"-16 Thread Adapter
$ 4.50
The female 1/4"-20 to male 3/8"-16 thread adapter converts a 1/4" mount to a 3/8" mount.
Female 3/8"-16 to Male 1/4"-20 Thread Adapter
$ 4.50 - Épuisé
Female 3/8"-16 to Male 1/4"-20 Thread Adapter
$ 4.50 - Épuisé
The female 3/8"-16 to male 1/4"-20 thread adapter converts a 3/8" mount to a 1/4" mount.
FineArt Pearl 4 x 6 , 30 Cards with Tin
$ 17.50
FineArt Pearl 4 x 6 , 30 Cards with Tin
$ 17.50
A unique presentation piece - 30 sheets of FineArt Paper with rounded corners in a logo embossed tin.
Flash Tube Protector
$ 19.95
Flash Tube Protector
$ 19.95
Photogenic Flash Tube Protective Cover for the Powerlight Monolights.
FlatHat 16" (40cm) Collapsible Drone Pad - Red Gold
$ 19.95
FlatHat 16" (40cm) Collapsible Drone Pad - Red Gold
$ 19.95
FlatHat 16" (40cm) Collapsible Drone Pad - Red Gold
FlatHat SKU: FHDPGR16 | Helix SKU: EXFHDPGR16
Overview
Improve landing skills: learn to land safely and accurately
Helps protect drone sensors and camera from rotor wash debris
Provides easy-to-see landing target and “return-home” location
Makes small drones on the ground easier to see
Integrated loops to attach FlatHat Lighting Kit (sold separately)
Made with durable, heavy-duty fabric
Size: 16” diameter expanded (collapses to 6" for storage)
Weight: 3.5 oz (100g)
Package Contents
(1) 16" FlatHat Collapsible Drone Pad
(1) fabric carry bag
FlatHat Lighting Kit for Collapsible Drone Pads - Gamma Green
$ 19.95
FlatHat Lighting Kit for Collapsible Drone Pads - Gamma Green
$ 19.95
FlatHat Lighting Kit for Collapsible Drone Pads - Gamma Green
FlatHat SKU: FHLKG | Helix SKU: EXFHLKG
Overview
Light up your FlatHat Drone Pad for low-light flying with FlatHat Lighting Kits, available in Ice Blue or Gamma Green colors.
The lighting kit incorporates a flexible, plastic coated electroluminescent wire that attaches to the perimeter of the 32” or 16" FlatHat Collapsible Drone Pad, allowing for better visibility in low-light flying conditions.
The wire length is sized to fit the perimeter of the 32" drone pad. To attach the lighting kit to the smaller circumference of the 16" drone pad simply shorten (cut) the wire with a sharp pair of scissors.
The included 4-way light controller allows you to set the lighting effect to constant, pulse, strobe, or off. It is powered by 2 AA batteries (not included).
Note, the drone pad can be collapsed and stored in the carry bag with the lighting kit attached.
Lighting Kit Features:
Attaches to perimeter of FlatHat 32" and 16" Collapsible Drone Pads
Electroluminescent wire is flexible
Cool to the touch
Water resistant
Package Contents
(1) FlatHat Lighting Kit with 7'10" (2.40m) electroluminescent wire and 4-way light controller
Note, FlatHat Lighting Kit controller requires 2 AA batteries (not included).
FlatHat Lighting Kit for Collapsible Drone Pads - Ice Blue
$ 19.95
FlatHat Lighting Kit for Collapsible Drone Pads - Ice Blue
$ 19.95
FlatHat Lighting Kit for Collapsible Drone Pads - Ice Blue
FlatHat SKU: FHLKB | Helix SKU: EXFHLKB
Overview
Light up your FlatHat Drone Pad for low-light flying with FlatHat Lighting Kits, available in Ice Blue or Gamma Green colors.
The lighting kit incorporates a flexible, plastic coated electroluminescent wire that attaches to the perimeter of the 32” or 16" FlatHat Collapsible Drone Pad, allowing for better visibility in low-light flying conditions.
The wire length is sized to fit the perimeter of the 32" drone pad. To attach the lighting kit to the smaller circumference of the 16" drone pad simply shorten (cut) the wire with a sharp pair of scissors.
The included 4-way light controller allows you to set the lighting effect to constant, pulse, strobe, or off. It is powered by 2 AA batteries (not included).
Note, the drone pad can be collapsed and stored in the carry bag with the lighting kit attached.
Lighting Kit Features:Attaches to perimeter of FlatHat 32" and 16" Collapsible Drone Pads
Electroluminescent wire is flexible
Cool to the touch
Water resistant
Package Contents
(1) FlatHat Lighting Kit with 7'10" (2.40m) electroluminescent wire and 4-way light controller
Note, FlatHat Lighting Kit controller requires 2 AA batteries (not included).
Flex Arm for Super Clamp
$ 19.95 - Épuisé
Flex Arm for Super Clamp
$ 19.95 - Épuisé
This Flex Arm is 21.6" in length and has a brass 5/8" Stud with a 3/8" female thread on one end and a 5/8" brass stud with 1/4" male thread on the opposite end. The arm can be used to hold up gobos, small LED lights, flashes, or other camera/video accessories in any position you want. Features: Brass Ends with aluminum Neck; 21.65" in Length; 0.66lbs Load Capacity; 5/8" Stud with 1/4" Male Screw; 5/8" Hex Stud with 3/8" Female Thread.
Highlights
› Brass Ends with Aluminium Neck
› 21.65" in Length
› 0.66lbs Load Capacity
› 5/8" Stud with 1/4" Screw
› 5/8" Hex Stud with 3/8" Female Socket
Package Contents
(1x) Flex Arm for Super Clamp
Outside Dimensions N/A
Inside Dimensions N/A
Product Weight (lb) 0.88 lb (0.4 kg)
Material Brass Ends w/ Aluminum & Steel Arm
Manufacturer Studio Assets
Formatt 62mm Screw-In Adapter Ring for FM500 Matte Box
$ 24.00
Formatt 62mm Screw-In Adapter Ring for FM500 Matte Box
$ 24.00
This Formatt 62mm Screw-In Adapter Ring is for the FM-600 Matte Box.
Fotodiox CamDolly Cinema Systems + Two Snake Track Flexible Rails (2x Rails)
$ 3,649.95
Fotodiox CamDolly Cinema Systems + Two Snake Track Flexible Rails (2x Rails)
$ 3,649.95
Fotodiox CamDolly Cinema Systems + Two Snake Track Flexible Rails (2x Rails)
MFR SKU: CamDolly-2x-Rail-kit | Helix SKU: FXCamDolly2xRailkit
Overview
The World's Most Flexible Camera Dolly and Slider System
Product Highlights:
- Portability: System packs into three individual custom-fit cases, the heaviest of which is less than 50 lbs. Carry them between shoots, load them into any car, even check them onto a plane.
- Gigantic Weight Load Capacity: The CamDolly Cinema Systen can take more than 550lbs of weight, enabling you to mount it with any camera and all the shabang you need… and you can even ride along if you want to.
- Use Any Tripod: Universal Tripod Holders can take whatever tripod you have.
- Full Kit includes 50ft (15.24m) of SnakeTrack: For extra-long runs we’ve found the longest flexible solid rubber track on the market.
- Track Ends for Any Length Tracks: The Track Ends provided will enable you to use any length pipes from your local hardware store with diameter from 0.8inch (20mm) to 1.4 inch (35mm). Along with Track Supports, if you’re going to use long rails, you’ll be able to support in 2 sections to prevent curving because of the weight.
- Limited 2-Year Manufacturer Warranty
Overview:
Whether you need a Ride-On Track Dolly, Ride-On Doorway Dolly, Heavy Duty Slider, Tabletop Dolly, or 360 Degree Orbit Dolly, the CamDolly has you covered. All you need is 15 minutes to assemble your CamDolly into its five different protocols to capture five completely different types of dolly shots.
Now you can bring a comprehensive dolly system to the shoot in your hatchback.
Once built, the CamDolly can support more than 550 pounds: more than enough capacity for a ride-on operator, your tripod, and any camera - DSLR or large cinema camera, whether you're shooting digital or film. Capable of riding a metal track, we designed the CamDolly with our SnakeTrack Flexible Rail in mind as a super-portable way to get complicated curves that would otherwise be impossible. Simply double the rail up, and you have a dual track that will give you a shot that's more than 20 feet long, or use 2 lengths of parallel rail for a 50 ft run. Every 50 ft. length of SnakeTrack Flexible Rail comes with a bucket bag for easy transportation.
Shoot with your own tripod and tripod head. Since there are so many different kinds of tripod feet, we've created universal "leg cups". Place the feet of your tripod into the cups, then lash them in with the included zip ties. We also recommend securing the tripod with some bungees or a cargo strap.
Instead of shooting with a tripod, you can also use a bazooka. We provide a bazooka mount with every CamDolly Cinema System kit. When you're shooting in tabletop or slider mode, you can directly attach your bowl tripod head to the main core piece of the CamDolly. The kit includes bowl adapters for 75mm, 100mm, and 150mm bowl mounts.
Building each of the different modes takes only a few minutes, and you can even fold down the partially-built dolly to make it easy to carry to and from your location. Perfect for cold weather: build the dolly indoors, remove four screws, fold down the CamDolly, walk out to your location, unfold CamDolly, and reinstall the four screws. Ready to go in under 60 seconds.
Five Main CamDolly Modes:
Ride-On Track Dolly - You can position the tripod and seat in any of several configurations, depending on the action that you're covering. The included push/pull T-bar gives your dolly grip control over the speed of your dolly move. The track wheels can ride on metal track, or the recommended SnakeTrack Flexible Rail. A pair of special compensation legs make it easy to negotiate the curves of the rubber rail, as well as smooth out any uneven rubber rail layouts.
• Straight or curved shots
• Compatible with any track
• 100ft of flexible rubber track
Ride-On Doorway Dolly - The tripod and seat mount in any of several ways, depending on your direction of travel. You can mount a set of four skate wheels (for shooting on smooth floors), or a set of four pneumatic tires for rougher terrain or carpet. A pair of special Compensation Legs make it easy for the dolly grip to use the push/pull T-bar to steer the dolly.
• Pneumatic wheels for smooth ride
• Sit & Ride
• Push and pull in any direction
Heavy Duty Slider - There are tons of great sliders out there. The problem is that most of them are for short runs, and only work with smaller sized cameras. With CamDolly, your run can be 8 feet, 12 feet, or even longer. In stead of high cost specialized rails, simply pick up some 30-35mm pipe at a home improvement store. The CamDolly Cinema System includes a pair of adjustable rail ends. You can either operate the Slider at ground level, or raise the slider up on C stands or light stands, and use the included pair of supports to eliminate sagging.
• Versatile & reliable design
• Ultra smooth moves and fluid operation for studio and outdoor cinematography
• A Camera Slider that can take on your fully rigged Arri Alexa with Optimo 24-290 lens, your DSLR camera or your iPhone
Tabletop Dolly - Using only the Core of the CamDolly, you can use this compact mode to do dolly shots on a tabletop, or very low angle shots on the floor. You can mount your tripod head directly onto the Core using one of the included bowl mount adapters. Attach the push-pull bar to create dramatic floor level dolly shots. You can also attach the push/pull bar directly to one of the wheels in order to steer the dolly.
• Works great where space is a problem
• Ultra compact
• Super light weight but high payload (over 440 lbs/200 kg)
• Use it for straight or arching shots
360° Orbit Dolly - attach three or four wheels (either skate wheels or pneumatic tires) to the CamDolly Core, or use extender legs with a full-sized tripod. You can lock the wheels to specific degrees to get a smooth, graceful, repeatable arc.
• Take a perfect 360 Degrees
• Set it up with any camera and any tripod
• For low shots, table top shots or high shots
• Push & pull in any directions
You can see why we call it a "Cinema System”. With the modular CamDolly, you’ve got the right dolly for whatever the shot calls for. You can change between modes in just a few minutes. The modular design also makes CamDolly more portable that a typical dolly. A single person can carry CamDolly to your location in 3 luggage sized cases, the heaviest of which is 50 pounds. Even with the SnakeTrack Flexible Rail, a whole CamDolly setup can fit in a compact car.
To make sure the idea was solid, a year was spent hand building prototypes. These went to independent film producers as well as friends at the majors like Disney, Pixar, Warner Brothers. The crew who make Hawaii 5-0 use CamDolly too. They all agreed that CamDolly would do a lot of good for a lot of people. We took all of their feedback and created the final version of CamDolly. This ultra-configurable camera dolly gives you an entire studio's worth of options. Add beautiful dolly shots to your film and video!
Performance:
- Adjustable Swivel Track Wheels - If you will use tracks from other systems or even our Solid Flexible Rubber Track, you will be able to mount the Track Wheels in the way that enables the full 20 cm (8 inch) swivel to compensate for the track width difference.
- Low or High Shots - Shot on a table or on the floor for those low shots. But when space is a problem, you can mount the CamDolly Table Top with your tripod using our Universal Tripod Holders and shoot an over the shorter shot.
- Take a Straight or a Perfect 360 Degrees Shots - Dialing in different degrees by turning the wheels will give you straight shoots and circular shots with any diameter distance from your subject. You can also make the camera turn around it’s center or lock it down completely and use it as a Tripod.
- Setting Up In Under 10 Minutes - One of the best things about the CamDolly is that any configuration can be set up in literally minutes. The Table top takes only about a minute and Tracking Camera Dolly with the seat and push and pull T-bar takes about 8-10 minutes.
- Compatible with ANY Camera - Also compatible with any DSLR or with your favorite SMART PHONE
- Bucket Bag for SnakeTrack - Minimize tangles by keeping each section of track in its own case that’s super easy to carry and transport.
- Soft Cases for All the Parts - Never loose any part of the CamDolly because every last screw has it’s own place in the foam. After the shoot, put everything in the cases. Then take one look and you will know if you have any parts still laying around.
Specifications:
Fotodiox Collapsible Portable Backdrop Kit with 2.1m Stand, 8x14' Muslin Black Background
$ 124.95
Fotodiox Collapsible Portable Backdrop Kit with 2.1m Stand, 8x14' Muslin Black Background
$ 124.95
Fotodiox Collapsible Portable Backdrop Kit with 2.1m Stand, 8x14' Muslin Black Background
MFR SKU: Background-8x14-Kit-BLK | Helix SKU: FXBackground8x14KitBLK
Overview
Product Highlights:
• Super sized for most of the studio and location situations; Pro-Grade Material, Heavy Duty Construction
• Optional stand can used to support the background anywhere, adjustable heights from 6-8 ft
• Optimized Black or Chromakey Green Color for Quick Location Backgrounds
• Collapsible Design for Quick Setup, transportation, and Storage
• Limited 2-Year Manufacturer Warranty
Fotodiox Collapsible Portable Backdrop Kit is the perfect addition to any studio that shoots portraits, video or TV work. These over-sized backgrounds set up and collapse with ease. They can readily be stored in the carry bag which can then be tossed into the trunk of your car.
In The Box:
• 8x14' Muslin Background• Storage Case
• 2.1m Stand (if chosen above)
Specifications:
| Materials | Cotton/Poly Blend Fabric w/ Collapsible Metal Frame |
| Shipping Dimensions | Background Only - 38 x 38 x 6 in (97 x 97 x 16 cm) @ 16 lb (256 oz) With 2.1m Stand - 38 x 38 x 6 in (97 x 97 x 16 cm) @ 17 lb (272 oz) |
| Manufacturer | Fotodiox Inc. |
| Warranty | Limited 24-Months |
Fotodiox Collapsible Portable Backdrop Kit with 2.1m Stand, 8x14' Muslin Chromakey Green Background
$ 124.95 - Épuisé
Fotodiox Collapsible Portable Backdrop Kit with 2.1m Stand, 8x14' Muslin Chromakey Green Background
$ 124.95 - Épuisé
Fotodiox Collapsible Portable Backdrop Kit with 2.1m Stand, 8x14' Muslin Chromakey Green Background
MFR SKU: Background-8x14-Kit-GN | Helix SKU: FXBackground8x14KitGN
Overview
Product Highlights:
• Super sized for most of the studio and location situations; Pro-Grade Material, Heavy Duty Construction
• Optional stand can used to support the background anywhere, adjustable heights from 6-8 ft
• Optimized Black or Chromakey Green Color for Quick Location Backgrounds
• Collapsible Design for Quick Setup, transportation, and Storage
• Limited 2-Year Manufacturer Warranty
Fotodiox Collapsible Portable Backdrop Kit is the perfect addition to any studio that shoots portraits, video or TV work. These over-sized backgrounds set up and collapse with ease. They can readily be stored in the carry bag which can then be tossed into the trunk of your car.
In The Box:
• 8x14' Muslin Background• Storage Case
• 2.1m Stand (if chosen above)
Specifications:
| Materials | Cotton/Poly Blend Fabric w/ Collapsible Metal Frame |
| Shipping Dimensions | Background Only - 38 x 38 x 6 in (97 x 97 x 16 cm) @ 16 lb (256 oz) With 2.1m Stand - 38 x 38 x 6 in (97 x 97 x 16 cm) @ 17 lb (272 oz) |
| Manufacturer | Fotodiox Inc. |
| Warranty | Limited 24-Months |
Fotodiox Lens Mount Adapter - Olympus Zuiko (OM) 35mm SLR Lens to Micro Four Thirds (MFT, M4/3) Mount Mirrorless Camera Body
$ 24.95
Fotodiox Lens Mount Adapter - Olympus Zuiko (OM) 35mm SLR Lens to Micro Four Thirds (MFT, M4/3) Mount Mirrorless Camera Body
$ 24.95
Fotodiox Lens Mount Adapter - Olympus Zuiko (OM) 35mm SLR Lens to Micro Four Thirds (MFT, M4/3) Mount Mirrorless Camera Body
Fotodiox SKU: OM35-MFT | Helix SKU: FXOM35MFT
Overview
Features:
Compatible Cameras
MFT Mirrorless Cameras - Popular models include:
Olympus PEN E-PL1, E-PL1s, E-PL2, E-PL3, E-P2, E-P3, E-M, OM-D, E-M5, E-M10
Panasonic Lumix DMC-G1, G2, G3, G10, GX1, GH1, GH2, GF1, GF2, GF3, GF5, GH4
Panasonic AG-AF100 Mirrorless Digital Cameras
Black Magic Pocket Cinema Camera (BMPCC)
Mirrorless cameras aren't only revolutionary because of their compact size; they're even more versatile for mounting lenses than their full-sized counterparts! Fotodiox offers strong support for mirrorless camera platforms with hundreds of options for mounting both modern and vintage lenses. Our adapters deliver infinity focus, manual aperture control, and a sturdy build for lasting quality.
| Lens Mount: | Olympus Zuiko (OM) 35mm SLR Lens |
| Body Mount: | Micro Four Thirds (MFT, M4/3) Mount Mirrorless Camera Body |
| Manufacturer: | Fotodiox Inc. |
| Warranty: | 24 Months |
Note:
All pictures are for illustration purposes only. Actual product may vary slightly due to ongoing improvements in design.
Fotodiox Macro Bellows for Canon EOS (EF, EF-S) Mount D/SLR Camera System for Extreme Close-up Photography
$ 59.95
Fotodiox Macro Bellows for Canon EOS (EF, EF-S) Mount D/SLR Camera System for Extreme Close-up Photography
$ 59.95
Fotodiox Macro Bellows for Canon EOS (EF, EF-S) Mount D/SLR Camera System for Extreme Close-up Photography
MFR SKU: Macro-Bellows-EOS | Helix SKU: FXMacroBellowsEOS
Overview
Fotodiox Pro 16-Rib, 60" Black and Silver Reflective Parabolic Umbrella with Neutral White Diffusion Cover
$ 79.95 - Épuisé
Fotodiox Pro 16-Rib, 60" Black and Silver Reflective Parabolic Umbrella with Neutral White Diffusion Cover
$ 79.95 - Épuisé
Fotodiox Pro 16-Rib, 60" Black and Silver Reflective Parabolic Umbrella with Neutral White Diffusion Cover
MFR SKU: Umbrella-Parabolic-BlackSilver-60-kit | Helix SKU: FXUmbrellaParabolicBlackSilver60kit
Overview
Product Highlights:
• Silver Interior for High Reflectivity; Spreads and Diffuses Light• Professional portable umbrella. Heavy duty, long lasting construction
• 16-Rib Design Maintains Shape for Evenly Spread Light
• Neutral Nylon Fabric for Balanced White Balance; Black Backing
• Limited 2-Year Manufacturer Warranty
Start controlling and modifying your light with this Silver/Black Umbrella. In general, the umbrella will soften and broaden the light output of any strobe or lower wattage constant light. This model features a reflective silver interior to provide a crisper, more focused light, revealing structure and detail in your subjects. The umbrella also has a black backing to minimize light loss and light spill while maximizing output. Silver umbrellas add specular highlights - a little bit more 'snap' than a white umbrella. Silver umbrellas may also add ½-1 f/stop of light output, depending on the light source used. Most studio lights include a built-in umbrella receptacle for instant mounting. There are also a variety of mounting brackets available for speedlights with adjustable and tiltable options for precise positioning. Additional control can be achieved by fine-tuning the 'focus' of the beam by varying the flash head's position along the umbrella's shaft.
Two Sizes:
• 60" - Perfect for a 3 person full length shot, or a 4x8 ft product setup
• 72" - Perfect for full length group shots and larger product setups
Specifications:
| Materials | Special Black Nylon w/ Reflective Silver Nylon Liner |
| Product Dimensions | 60" - 60 x 60 x 31 in (152 x 152 x 79 cm) @ 2.2 lb (33.5 oz) 72" - 72 x 72 x 37.5 in (183 x 183 x 95 cm) @ 2.7 lb (41.1 oz) |
| Shipping Dimensions | 60" - 4 x 4 x 40 in (10.2 x 10.2 x 101.6 cm) @ 5 lb (80 oz) 72" - 8 x 8 x 48 in (20.3 x 20.3 x 121.9 cm) @ 23 lb* (368 oz) |
| Manufacturer | Fotodiox Inc. |
| Warranty | Limited 24-Months |
Fotodiox Pro 16-Rib, 72" Black and Silver Reflective Parabolic Umbrella with Neutral White Diffusion Cover
$ 94.95
Fotodiox Pro 16-Rib, 72" Black and Silver Reflective Parabolic Umbrella with Neutral White Diffusion Cover
$ 94.95
Fotodiox Pro 16-Rib, 72" Black and Silver Reflective Parabolic Umbrella with Neutral White Diffusion Cover
MFR SKU: Umbrella-Parabolic-BlackSilver-72-kit | Helix SKU: FXUmbrellaParabolicBlackSilver72kit
Overview
Product Highlights:
• Silver Interior for High Reflectivity; Spreads and Diffuses Light• Professional portable umbrella. Heavy duty, long lasting construction
• 16-Rib Design Maintains Shape for Evenly Spread Light
• Neutral Nylon Fabric for Balanced White Balance; Black Backing
• Limited 2-Year Manufacturer Warranty
Start controlling and modifying your light with this Silver/Black Umbrella. In general, the umbrella will soften and broaden the light output of any strobe or lower wattage constant light. This model features a reflective silver interior to provide a crisper, more focused light, revealing structure and detail in your subjects. The umbrella also has a black backing to minimize light loss and light spill while maximizing output. Silver umbrellas add specular highlights - a little bit more 'snap' than a white umbrella. Silver umbrellas may also add ½-1 f/stop of light output, depending on the light source used. Most studio lights include a built-in umbrella receptacle for instant mounting. There are also a variety of mounting brackets available for speedlights with adjustable and tiltable options for precise positioning. Additional control can be achieved by fine-tuning the 'focus' of the beam by varying the flash head's position along the umbrella's shaft.
Two Sizes:
• 60" - Perfect for a 3 person full length shot, or a 4x8 ft product setup
• 72" - Perfect for full length group shots and larger product setups
Specifications:
| Materials | Special Black Nylon w/ Reflective Silver Nylon Liner |
| Product Dimensions | 60" - 60 x 60 x 31 in (152 x 152 x 79 cm) @ 2.2 lb (33.5 oz) 72" - 72 x 72 x 37.5 in (183 x 183 x 95 cm) @ 2.7 lb (41.1 oz) |
| Shipping Dimensions | 60" - 4 x 4 x 40 in (10.2 x 10.2 x 101.6 cm) @ 5 lb (80 oz) 72" - 8 x 8 x 48 in (20.3 x 20.3 x 121.9 cm) @ 23 lb* (368 oz) |
| Manufacturer | Fotodiox Inc. |
| Warranty | Limited 24-Months |
Fotodiox Pro Autofocus 2X Teleconverter Compatible with Canon EOS EF Full Frame Lenses and EF/EFs Cameras
$ 99.95 - Épuisé
Fotodiox Pro Autofocus 2X Teleconverter Compatible with Canon EOS EF Full Frame Lenses and EF/EFs Cameras
$ 99.95 - Épuisé
Fotodiox Pro Autofocus 2X Teleconverter Compatible with Canon EOS EF Full Frame Lenses and EF/EFs Cameras
MFR SKU: EOS-2x-AF-Tele | Helix SKU: FXEOS2xAFTele
Overview
The Fotodiox 2x Teleconverter for Canon cameras is a precision optical component designed to expand your photographic capabilities. This premium quality 2x teleconverter, effectively doubles the focal length of the lens it's used with and maintains the resolution and contrast of any fine optic.
The teleconverter will multiply the focal length of the existing lens by 2x, and will cut back the amount of light by 2 f/stops. For example, using a 2x teleconverter with a 300 mm lens will effectively increase the focal length to 600 mm and a lens set to f/2.8 will now be f/5.6.
A maximum aperture of f/4 or greater is required in order to fully utilize the autofocus capabilities. Please be aware that AF will work properly only if there is enough light and contrast on the subject to activate the camera's AF sensors. Manual focusing is recommended when using lenses with a smaller open f-stop value than those given above.
A teleconverter is a portable, high-quality and versatile accessory that's well worth having in your camera bag!
Product Highlights:
Doubles the focal length of a Canon EF lenses (2.0x Magnification Factor) (Will not fit all EFs lenses due to long rear element length)
Communication between lens & camera enables auto focus, auto iris & image stabilization
Lens construction features 4 elements in 3 groups for sharp images
A maximum aperture of f/4 or greater is required in order to fully utilize the autofocus capabilities.
Limited 2-Year Manufacturer Warranty
Compatibility:
Canon EOS (EF, EF-S) Mount SLR Cameras - Popular models include:
- EOS 10D, 20D, 20Da, 30D, 40D, 50D, 60D, 60Da, 70D, 80D, 90D
- EOS 5D/II/III/IV, 5DS/R, 6D/II, 7D/II
- EOS 1D/II/IIN/III/IV, 1Ds/II/III, 1D C, 1D X/II
- EOS Rebel, XT, XS, T1i-T7i, SL1, SL2, SL3
- Blackmagic Pocket Cinema Camera 6K (Canon EF)
- Z CAM E2-S6 Super 35 6K, E2-F6 Full-Frame 6K,
E2-F8 Full-Frame 8K Cinema Cameras
Specifications:
| Lens Mount | Canon EOS (EF) Mount D/SLR Lenses |
| Body Mount | Canon EOS (EF / EFs) Mount D/SLR Cameras |
| Teleconversion | 2.0x Magnification Factor |
| Product Dimensions | 2.8 x 2.6 x 1.3 in (7 x 6.5 x 3.3 cm) @ 0.3 lb (4.4 oz) |
| Shipping Dimensions | 5 x 5 x 5 in (12.7 x 12.7 x 12.7 cm) @ 0.5 lb (8 oz) |
| Manufacturer | Fotodiox Inc. |
| Warranty | Limited 24-Months |
Fotodiox Pro FACTOR Radius2 Wide Angle Light - 2x2 ft Curved Bicolor Dimmable Studio Light
$ 1,099.95
Fotodiox Pro FACTOR Radius2 Wide Angle Light - 2x2 ft Curved Bicolor Dimmable Studio Light
$ 1,099.95
Fotodiox Pro FACTOR Radius2 Wide Angle Light - 2x2 ft Curved Bicolor Dimmable Studio Light
Fotodiox SKU: LED-W60-Radius2 | Helix SKU: FXLEDW60Radius2
Overview
FACTOR Radius Lights are an industry first with a wide 180° beam angle, designed for faster setups with fewer lights. The breakthrough curved shape creates an ultra-wide 180° beam angle which spreads the light wider than ever before. FACTOR Radius lights are ideal for greenscreen work, rapid-fire setups, immersive VR capture, multi-cam setups, wide-angle shots and more.
FACTORSOFT™ technology creates beautiful, strong, single-source light without the shortcomings of conventional LED panels. Factor lights are ready to go right out of the box, no extra diffusion or accessories needed and create a strong, diffuse light with no hotspots with a single, soft, clean shadow and a CRI ≥96 making them great for photo or video shoots. FACTOR lights are also flicker-free making them a great option for any shooting scenario, including slow motion video.
FACTOR Radius lights have a solid aluminum frame for durability and added heat dissipation. The “silent running” intelligent cooling fan ensures that your lights won’t overheat without adding fan noise to your shoot. The heavy-duty, all metal yoke and ball head allow you to mount on stands or hang in any suitable location. FACTOR Radius lights also feature DMX control compatible with any DMX 512 control console. Using a DMX console will allow you control color temperature and brightness remotely as well as the ability to create lighting presets to save you valuable time. Color temperature, brightness, DMX Channel and remaining battery power are all displayed in real time on the rear LCD display. Each FACTOR Radius 1, 2 & 3 light comes in a custom fit wheeled case to make transporting them safe and simple.
FACTOR Radius2 light draws a maximum of 200 watts, so you can run them on any household electrical circuit. When used with wall power the AC adapter is designed to lock into the V-lock battery plate for a secure no-slip connection keeping the adapter attached to the light unit and out of your way. FACTOR lights also feature integrated V-lock battery plates so you can use them on the go, even if AC power isn’t available. FACTOR lights remain flicker free even on battery power due to the PWM integrated circuit design.
What's Included
Fotodiox Pro FACTOR Radius3 Wide Angle Light - 3x2 ft Curved Bicolor Dimmable Studio Light
$ 1,499.95
Fotodiox Pro FACTOR Radius3 Wide Angle Light - 3x2 ft Curved Bicolor Dimmable Studio Light
$ 1,499.95
Fotodiox Pro FACTOR Radius3 Wide Angle Light - 3x2 ft Curved Bicolor Dimmable Studio Light
Fotodiox SKU: LED-W90-Radius3 | Helix SKU: FXLEDW90Radius3
Overview
FACTOR Radius Lights are an industry first with a wide 180° beam angle, designed for faster setups with fewer lights. The breakthrough curved shape creates an ultra-wide 180° beam angle which spreads the light wider than ever before. FACTOR Radius lights are ideal for greenscreen work, rapid-fire setups, immersive VR capture, multi-cam setups, wide-angle shots and more.
FACTORSOFT™ technology creates beautiful, strong, single-source light without the shortcomings of conventional LED panels. Factor lights are ready to go right out of the box, no extra diffusion or accessories needed and create a strong, diffuse light with no hotspots with a single, soft, clean shadow and a CRI ≥96 making them great for photo or video shoots. FACTOR lights are also flicker-free making them a great option for any shooting scenario, including slow motion video.
FACTOR Radius lights have a solid aluminum frame for durability and added heat dissipation. The “silent running” intelligent cooling fan ensures that your lights won’t overheat without adding fan noise to your shoot. The heavy-duty, all metal yoke and ball head allow you to mount on stands or hang in any suitable location. FACTOR Radius lights also feature DMX control compatible with any DMX 512 control console. Using a DMX console will allow you control color temperature and brightness remotely as well as the ability to create lighting presets to save you valuable time. Color temperature, brightness, DMX Channel and remaining battery power are all displayed in real time on the rear LCD display. Each FACTOR Radius 1, 2 & 3 light comes in a custom fit wheeled case to make transporting them safe and simple.
FACTOR Radius3 light draws a maximum of 300 watts, so you can run them on any household electrical circuit. When used with wall power the AC adapter is designed to lock into the V-lock battery plate for a secure no-slip connection keeping the adapter attached to the light unit and out of your way. FACTOR lights also feature integrated V-lock battery plates so you can use them on the go, even if AC power isn’t available. FACTOR lights remain flicker free even on battery power due to the PWM integrated circuit design.
What's Included
Fotodiox Pro FACTOR Ring - Ring Light Module Kits for Videographers; Lens Attached Ringlights w/ D-Tap Power Cable
$ 519.95
Fotodiox Pro FACTOR Ring - Ring Light Module Kits for Videographers; Lens Attached Ringlights w/ D-Tap Power Cable
$ 519.95
Fotodiox Pro FACTOR Ring - Ring Light Module Kits for Videographers; Lens Attached Ringlights w/ D-Tap Power Cable
Fotodiox SKU: VR-114 | Helix SKU: FXVR114
Overview
Product Highlights:
Designed with Broadcast & ENG Systems in Mind
Designed primarily for broadcast and ENG camera systems, FACTOR Ring lights have a large diameter opening accommodating lenses 95mm, 110mm, 114mm, or 134mm in size and runs off D-Tap power from the camera or rig. The FACTOR Ring features both brightness (10-100%) and bi-color temperature (2800-6500k) control via the mode buttons, and 4 preset color temperature settings for quick change situations as well as a LCD screen allowing you to check the current brightness and color temperature settings. Boasting a CRI of 95 or greater and TLCI of 96 or greater, the large size ring light produces a stunning eye light as well as creating beautifully soft skin tones.
Ultra Bright LEDs, CRI & TLCI of 95 for Accurate Colors
Composed of ultra-bright chip LEDs with a lifespan of up to 50,000 hours. These LEDs have a standardized color temperature with a CRI and TLCI of 95 or greater for a more accurate color reproduction in skin tones and subtle hues. The control section of the FACTOR Ringlight has an LCD screen showing real-time information and soft touch operation buttons to give you easy access to control the power, brightness and color temperature. Match the light in your location or go cooler or warmer for a more creative look or use multiple lights and color temperatures to shape your subject.
All Aluminum Frame for Better Heat Dissipation
The design includes an all-aluminum frame for better heat dissipation to help ensure long bulb life. The hardened anodized aluminum also provides rugged durability for when its being handled on shoots yet remaining lightweight so that it can be lens mounted easily. The light can be powered with D-Tap battery systems with a voltage range of 13-17V. The light is heat-free and provides stable, consistent output.
Flicker-Free, Dimmable, Bi-Color from 2800K to 6500K
FACTOR Ringlights are equipped with ultra-bright dual colored LED chips with a lifespan of up to 50,000 hours. Flicker-free and uniformly dimmable from 10%-100% due to the PWM integrated design. Beautifully soft light - ideal for location and studio productions for both photographers and filmmakers. The light level is fully dimmable from 10%-100% throughout the 2800k to 6500k color temperature range, giving you options beyond daylight and tungsten to match lighting wherever you may be.
Specifications:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fotodiox Pro FACTOR Ring - Ring Light Module Kits for Videographers; Lens Attached Ringlights w/ D-Tap Power Cable
$ 539.95
Fotodiox Pro FACTOR Ring - Ring Light Module Kits for Videographers; Lens Attached Ringlights w/ D-Tap Power Cable
$ 539.95
Fotodiox Pro FACTOR Ring - Ring Light Module Kits for Videographers; Lens Attached Ringlights w/ D-Tap Power Cable
Fotodiox SKU: VR-134 | Helix SKU: FXVR134
Overview
Product Highlights:
Designed with Broadcast & ENG Systems in Mind
Designed primarily for broadcast and ENG camera systems, FACTOR Ring lights have a large diameter opening accommodating lenses 95mm, 110mm, 114mm, or 134mm in size and runs off D-Tap power from the camera or rig. The FACTOR Ring features both brightness (10-100%) and bi-color temperature (2800-6500k) control via the mode buttons, and 4 preset color temperature settings for quick change situations as well as a LCD screen allowing you to check the current brightness and color temperature settings. Boasting a CRI of 95 or greater and TLCI of 96 or greater, the large size ring light produces a stunning eye light as well as creating beautifully soft skin tones.
Ultra Bright LEDs, CRI & TLCI of 95 for Accurate Colors
Composed of ultra-bright chip LEDs with a lifespan of up to 50,000 hours. These LEDs have a standardized color temperature with a CRI and TLCI of 95 or greater for a more accurate color reproduction in skin tones and subtle hues. The control section of the FACTOR Ringlight has an LCD screen showing real-time information and soft touch operation buttons to give you easy access to control the power, brightness and color temperature. Match the light in your location or go cooler or warmer for a more creative look or use multiple lights and color temperatures to shape your subject.
All Aluminum Frame for Better Heat Dissipation
The design includes an all-aluminum frame for better heat dissipation to help ensure long bulb life. The hardened anodized aluminum also provides rugged durability for when its being handled on shoots yet remaining lightweight so that it can be lens mounted easily. The light can be powered with D-Tap battery systems with a voltage range of 13-17V. The light is heat-free and provides stable, consistent output.
Flicker-Free, Dimmable, Bi-Color from 2800K to 6500K
FACTOR Ringlights are equipped with ultra-bright dual colored LED chips with a lifespan of up to 50,000 hours. Flicker-free and uniformly dimmable from 10%-100% due to the PWM integrated design. Beautifully soft light - ideal for location and studio productions for both photographers and filmmakers. The light level is fully dimmable from 10%-100% throughout the 2800k to 6500k color temperature range, giving you options beyond daylight and tungsten to match lighting wherever you may be.
Specifications:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fotodiox Pro FACTOR Ring - Ring Light Module Kits for Videographers; Lens Attached Ringlights w/ D-Tap Power Cable
$ 479.95
Fotodiox Pro FACTOR Ring - Ring Light Module Kits for Videographers; Lens Attached Ringlights w/ D-Tap Power Cable
$ 479.95
Fotodiox Pro FACTOR Ring - Ring Light Module Kits for Videographers; Lens Attached Ringlights w/ D-Tap Power Cable
Fotodiox SKU: VR-95 | Helix SKU: FXVR95
Overview
Product Highlights:
- Designed with broadcast & ENG systems in mind; Large lens opening, Utilizes D-Tap power, Preset color settings
- Composed of ultra bright chip LEDs, standardized color temperature with a CRI & TLCI of 96 or higher for accurate colors, skin tones and hues
- Design includes an all-aluminum frame for better heat dissipation and durability to help ensure a long product life
- Flicker-free and uniformly dimmable from 10%-100% due to the PWM integrated design; bicolor design is adjustable from 2800K to 6500K
- Limited 2-Year Manufacturer Warranty
Designed with Broadcast & ENG Systems in Mind
Designed primarily for broadcast and ENG camera systems, FACTOR Ring lights have a large diameter opening accommodating lenses 95mm, 110mm, 114mm, or 134mm in size and runs off D-Tap power from the camera or rig. The FACTOR Ring features both brightness (10-100%) and bi-color temperature (2800-6500k) control via the mode buttons, and 4 preset color temperature settings for quick change situations as well as a LCD screen allowing you to check the current brightness and color temperature settings. Boasting a CRI of 95 or greater and TLCI of 96 or greater, the large size ring light produces a stunning eye light as well as creating beautifully soft skin tones.
Ultra Bright LEDs, CRI & TLCI of 95 for Accurate Colors
Composed of ultra-bright chip LEDs with a lifespan of up to 50,000 hours. These LEDs have a standardized color temperature with a CRI and TLCI of 95 or greater for a more accurate color reproduction in skin tones and subtle hues. The control section of the FACTOR Ringlight has an LCD screen showing real-time information and soft touch operation buttons to give you easy access to control the power, brightness and color temperature. Match the light in your location or go cooler or warmer for a more creative look or use multiple lights and color temperatures to shape your subject.
All Aluminum Frame for Better Heat Dissipation
The design includes an all-aluminum frame for better heat dissipation to help ensure long bulb life. The hardened anodized aluminum also provides rugged durability for when its being handled on shoots yet remaining lightweight so that it can be lens mounted easily. The light can be powered with D-Tap battery systems with a voltage range of 13-17V. The light is heat-free and provides stable, consistent output.
Flicker-Free, Dimmable, Bi-Color from 2800K to 6500K
FACTOR Ringlights are equipped with ultra-bright dual colored LED chips with a lifespan of up to 50,000 hours. Flicker-free and uniformly dimmable from 10%-100% due to the PWM integrated design. Beautifully soft light - ideal for location and studio productions for both photographers and filmmakers. The light level is fully dimmable from 10%-100% throughout the 2800k to 6500k color temperature range, giving you options beyond daylight and tungsten to match lighting wherever you may be.
Specifications:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
