F&V 15MM LWS/19MM STUDIO RAIL MOUNT FOR Z720/R720
$ 69.00 - Vendido
F&V 15MM LWS/19MM STUDIO RAIL MOUNT FOR Z720/R720
F&V SKU:118151060000 | Helix SKU: FV118151060000
Overview
F&V 4.2" Stainless Steel Articulating Arm
$ 34.95 - Vendido
F&V 4.2" Stainless Steel Articulating Arm
F&V SKU: 102010040101 | Helix SKU: FV102010040101
Overview
The F&V Lighting 4.2" Stainless Steel Articulating Arm allows for the mounting of LCD monitors or small LED lights to the top of your camera shoe mount. With a three-jointed arm, this accessory has a wide range of motion. A single-point lock knob allows you to easily secure the position of your arm in place. This articulating arm features stainless steel sockets that offer greater strength. This arm can be mounted either on top of a camera in a standard cold shoe via the cold shoe adapter that is included. The cold shoe adapter can also be removed revealing a 1/4"-20 male thread that can be used to thread the arm into 1/4"-20 thread-ins.
Features
- Stronger Stainless Steel Sockets
- Single Lock Knob
- 1/4"-20 Male Thread on both ends
F&V 8.3" Stainless Steel Articulating Arm
$ 39.99
F&V 8.3" Stainless Steel Articulating Arm
F&V SKU: 102010050101 | Helix SKU: FV102010050101
Overview
The F&V Lighting 8.3" Stainless Steel Articulating Arm allows for the mounting of LCD monitors or small LED lights to the top of your camera shoe mount. With a three-jointed arm, this accessory has a wide range of motion. A single-point lock knob allows you to easily secure the position of your arm in place. This articulating arm features stainless steel sockets that offer greater strength. This arm can be mounted either on top of a camera in a standard cold shoe via the cold shoe adapter that is included. The cold shoe adapter can also be removed revealing a 1/4"-20 male thread that can be used to thread the arm into 1/4"-20 thread-ins.
Features
- Stronger Stainless Steel Sockets
- Single Lock Knob
- 1/4"-20 Male Thread on both ends
F&V BK4-1 Barndoor Kit 4 Leaf with Frame for K4000 SE, Z400S Soft, and Z800S Soft
$ 159.50 - Vendido
F&V BK4-1 Barndoor Kit 4 Leaf with Frame for K4000 SE, Z400S Soft, and Z800S Soft
F&V SKU: 10311002 | Helix SKU: FV10311002
Overview
Control the light spread of your Z400S Soft or K4000 SE with this four leaf barn door kit. The kit includes the top, bottom, and two side barn door flags. The flags easily attach to the included FAF-1 Filter Frame with thumb screws. The FAF-1 uses the new mounting system found on the Z400S Soft and K4000 SE lights. The frame quickly snaps onto the light and is locked into place. When it needs to be removed, press the button on each corner of the light to release the frame.
Please note this kit is not compatible with the K4000 Lumic, K4000 Plus, nor the old Z400 UltraColor lights. These lights will need a corner upgrade to allow use of this kit.
F&V BSS2 Barn Door Single-Leaf Sides Set for K4000 SE, Z400S Soft, and Z800S Soft
$ 69.50
F&V BSS2 Barn Door Single-Leaf Sides Set for K4000 SE, Z400S Soft, and Z800S Soft
F&V SKU: 10311007 | Helix SKU: FV10311007
Overview
This set of side barn doors attaches to the FAF-1 Filter Adapter Frame and the FAF-2 Filter Adapter Frame (both sold separately) to be used with the K4000 SE, Z400S Soft, and Z800S Soft 1x1 LED Lights. The barn door flags include mounting screws to attach them to the filter adapter frame. The sides are a single leaf design.
Note - These Barn Doors cannot attach to the lights directly. They need the FAF-1 Filter Adapter Frame or the FAF-2 Filter Adapter Frame to attach to the lights.
F&V BSS6 Barn Door Three-Leaf Sides Set for K4000 SE, Z400S Soft, and Z800S Soft
$ 89.50
F&V BSS6 Barn Door Three-Leaf Sides Set for K4000 SE, Z400S Soft, and Z800S Soft
F&V SKU: 10311008 | Helix SKU: FV10311008
Overview
This set of side barn doors attaches to the FAF-1 Filter Adapter Frame and the FAF-2 Filter Adapter Frame (both sold separately) to be used with the K4000 SE, Z400S Soft, and Z800S Soft 1x1 LED Lights. The barn door flags include mounting screws to attach them to the filter adapter frame. The sides are a three-leaf design.
Note - These Barn Doors cannot attach to the lights directly. They need the FAF-1 Filter Adapter Frame or the FAF-2 Filter Adapter Frame to attach to the lights.
F&V BST2-1 Barn Door Set Top/Bottom for K4000 SE and Z400S Soft
$ 59.50
F&V BST2-1 Barn Door Set Top/Bottom for K4000 SE and Z400S Soft
F&V SKU: 10311005 | Helix SKU: FV10311005
Overview
This set of top and bottom barn doors attaches to the FAF-1 Filter Frame Adapter (sold separately) to be used with the K4000 SE and Z400S Soft 1x1 LED Lights. The barn door flags include mounting screws to attach them to the filter adapter frame.
Note - These Barn Doors cannot attach to the lights directly. They need the FAF-1 Filter Frame Adapter to be able to mount to the lights.
F&V BST2-2 Barn Door Set Top/Bottom for the Z800S Soft
$ 79.50
F&V BST2-2 Barn Door Set Top/Bottom for the Z800S Soft
F&V SKU: 10311006 | Helix SKU: FV10311006
Overview
This set of top and bottom barn doors attaches to the FAF-1 Filter Frame Adapter (sold separately) to be used with the Z800S Soft 1x2 LED Light. The barn door flags include mounting screws to attach them to the filter adapter frame.
Note - These Barn Doors cannot attach to the lights directly. They need the FAF-1 Filter Frame Adapter to be able to mount to the lights.
F&V Dedicated WiFi Remote Control
$ 99.00
F&V Dedicated WiFi Remote Control
F&V SKU: 109112010201 | Helix SKU: FV109112010201
Overview
Use the Dedicated WiFi Remote Control to modify the intensity or color temperature of any F&V product that has a WiFi Module.
Please note, this remote cannot control the individual quadrants of the Z720 and R720 with Wifi Module.
PRO TIP: The remote will lock after 30 seconds of inactivity. To wake up the remote press the CANCEL and SET buttons at the same time.
Specifications
| Barcode | N/A |
|---|---|
| Manufacturer | F&V |
| Country of Manufacture | China |
| Specifications |
Uses 4x AAA batteries LCD display |
| Package Contents |
(1x) Dedicated WiFi Remote Control |
| Product Weight (lb) | N/A |
F&V FAF-1 Filter Adapter Frame for K4000 SE and Z400S Soft
$ 59.50 - Vendido
F&V FAF-1 Filter Adapter Frame for K4000 SE and Z400S Soft
F&V SKU: 10315002 | Helix SKU: FV10315002
Overview
The FAF-1 is a frame that gels and filters can be mounted and then attached to either the K4000 SE or Z400S Soft light. The frame uses the new attachment system on the K4000 SE and Z400S Soft. Simply snap on the frame and it is secured to the light and cannot be removed until the buttons on each of the corners are pushed in.
The frame also is required to use the BST2-1, BSS2, and BSS6 Barn Doors (sold separately) with the lights. Each Barn Door attaches to the frame by two thumb screws.
Securely mount gels, filters, and barn doors to the K4000 SE and Z400S Soft lights.
F&V FAF-2 Filter Adapter Frame for Z800S Soft
$ 79.50
F&V FAF-2 Filter Adapter Frame for Z800S Soft
F&V SKU: 10315003 | Helix SKU: FV10315003
Overview
The FAF-2 is a frame that gels and filters can be mounted and then attached to Z800S Soft light. The frame uses the new attachment system on the Z800S Soft. Simply snap on the frame making it secured to the light and cannot be removed until the buttons on each of the corners are pushed in.
The frame is required to use the BST2-2, BSS2, and BSS6 Barn Doors (sold separately) with the lights. Each Barn Door attaches to the frame by two thumb screws.
Securely mount gels, filters, and barn doors to the Z800S Soft lights.
F&V Frost Diffusion Filter for R-300 Ring Light
$ 15.99
F&V Frost Diffusion Filter for R-300 Ring Light
F&V SKU: 21815004 | Helix SKU: FV21815004
Overview
This replacement Frost Diffusion Filter for the R-300 LED Ring Light gives a slight diffusion to the light and widens the beam angle. This diffuser can also act as a filter holder for gels by sandwiching them between the filter and the light. It also protects the front surface of the lights from dust and scratches. The magnetic mounting allows for quick and easy removal and swapping of filters. Compatible with the original R-300, R-300 SE, and R-300S SE Ring Lights.
Specification
Manufacturer: F&V
Country of Manufacture: China
Package Contents: (1x) R-300 Frost Diffusion Filter
F&V HG30-1 Honeycomb Grid 30° for K4000 SE and Z400S Soft
$ 79.50
F&V HG30-1 Honeycomb Grid 30° for K4000 SE and Z400S Soft
F&V SKU: 10314001 | Helix SKU: FV10314001
Overview
Narrow your lights output to 30 degrees. This grid uses the new push-button connectors found on the K4000 SE, K4000S SE, and the Z400S Soft. Not compatible with previous 1x1 panels.
Control the beam angle of the K4000 SE and Z400S Soft lights with the HG30-1 Honey Comb Grid. This grid narrows the beam of the light down to 30 degrees. The grid uses the new push-button mounts featured on the K4000 SE and Z400S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
F&V HG30-2 Honeycomb Grid 30° for Z800S Soft
$ 99.50
F&V HG30-2 Honeycomb Grid 30° for Z800S Soft
F&V SKU: 10314007 | Helix SKU: FV10314007
Overview
Narrow your lights output to 30 degrees. This grid uses the new push-button connectors found on the Z800S Soft. Not compatible with previous 1x2 panels.
Control the beam angle of the Z800S Soft light with the HG30-2 Honey Comb Grid. This grid narrows the beam of the light down to 30 degrees. The grid uses the new push-button mounts featured on the Z800S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
F&V HG45-1 Honeycomb Grid 45° for K4000/Z400
$ 79.50
F&V HG45-1 Honeycomb Grid 45° for K4000/Z400
F&V SKU: 10314005 | Helix SKU: FV10314005
Overview
Control the beam angle of the K4000 SE and Z400S Soft lights with the HG45-1 Honey Comb Grid. This grid narrows the beam of the light down to 45 degrees. The grid uses the new push-button mounts featured on the K4000 SE and Z400S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
Narrow your lights output to 30 degrees. This grid uses the new push-button connectors found on the K4000 SE, K4000S SE, and the Z400S Soft. Not compatible with previous 1x1 panels.
Specifications
| Barcode | N/A |
|---|---|
| Manufacturer | F&V |
| Country of Manufacture | China |
| Specifications | N/A |
| Package Contents | (1x) HG45-1 Honeycomb Grid |
| Product Weight (lb) | N/A |
F&V HG45-2 Honeycomb Grid 45° for Z800S Soft
$ 99.50
F&V HG45-2 Honeycomb Grid 45° for Z800S Soft
F&V SKU: 10314008 | Helix SKU: FV10314008
Overview
Control the beam angle of the Z800S Soft light with the HG45-2 Honey Comb Grid. This grid narrows the beam of the light down to 45 degrees. The grid uses the new push-button mounts featured on the Z800S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
Narrow your lights output to 45 degrees. This grid uses the new push-button connectors found on the Z800S Soft. Not compatible with previous 1x2 panels.
F&V Junior Joint Ball Head
$ 39.00 $ 19.99
F&V Junior Joint Ball Head
F&V SKU: 102070300101 | Helix SKU: FV102070300101
Overview
The F&V Lighting Junior Joint Pro Ball Head has a 1/4"-20 male thread on an articulating ball joint. It has a standard cold shoe to mount on to any camera's standard hot/cold shoe. On the underside of the cold shoe is 1/4"-20 female thread-in which can be used in conjunction with many photographic light stands - threading onto the 1/4"-20 male thread of the light stands 5/8" stud. The Junior Joint is strong enough to support the weight of 4x Z96 units linked together, or 2x Z180 units with batteries.
Features
- New design offers improved strength
- 1/4"-20 Male Thread on a Articulating Ball Joint
- Standard Cold Shoe
- 1/4"-20 Female Thread on Underside of Cold Shoe
F&V K12000 SE Daylight LED Studio Panel (V-Mount)
$ 1,149.00 $ 549.99
F&V K12000 SE Daylight LED Studio Panel (V-Mount)
F&V SKU: 18020503 | Helix SKU: FV18020503
Overview
Combined Strengths All-in-One
TLCI 99, CRI 95±2
Vibrant Color Reproduction
With a TLCI of up to 99 (97±2) and a CRI of up to 97 (95±2), the SE fixtures raise the color reproduction to new heights, representing colors truthfully, neutral and vibrant.
Increased Brightness
An advanced design results in even more brightness than previous generations could achieve. Yet also the new Special Editions maintain a wide beam angle to not sacrifice softness for brightness.
New Attachment System
Incorporating the new F&V attachment system for light shaping accessories, the SE fixtures are compatible with the full range of tools like barndoors, honeycomb grids, diffusers, filter-holders and softboxes.
Specifications
DIMENSIONS
Model
K12000 SE
K12000S SE
Item No.
18020502 (EU)
18020503 (US)
18020402 (EU)
18020403 (US)
EAN Code
6949773304325 (EU)
6949773304332 (US)
6949773304387 (EU)
6949773304394 (US)
Net Weight
3.7 kg (8.1 lbs)
3.7 kg (8.1 lbs)
Packed Weight
5 kg (11 lbs)
5 kg (11 lbs)
Packed Size
650×130×415 mm
650×130×415 mm
Note Protection Mark according to DIN 3
SPECIFICATION
PHOTOMETRIC DATA (preliminary results)
K12000 SE
with KS-1 Intensifier
K12000 SE
45° beam angle
50° beam angle
K12000S SE
with KS-1 Intensifier
K12000S SE
50° beam angle
45° beam angle
Item Includes
F&V K2000 Power Daylight LED Half-Panel (V-Mount)
$ 389.99 $ 189.99
F&V K2000 Power Daylight LED Half-Panel (V-Mount)
F&V SKU: 18022303 | Helix SKU: FV18022303
Overview
K2000 Power
Half Size - Full Brightness
Half Size - Full Brightness
With half the surface area in comparison to
the original K4000 Lumic we were able to
achieve a higher brightness than before at
1x1 size (K2000 Power: 2723 lux@1m 75°
beam angle, K4000 Lumic: 2475 lux@1m 60°), making the K2000 Power the perfect portable lightsource.
Perfect Travel Companion
Being compact in size, low in weight and
with a separate battery plate that can be
mounted on the bottom of the light stand
as a counterweight, the K2000 Power is
the perfect travel companion that also
works reliably on lightweight light stands.
New Attachment System
Incorporating the new F&V attachment
system for light shaping accessories, you
can mount light shaping tools like barndoors,honeycomb grids, diffusers, filterholders and softboxes easily and securely to the K2000 Power.
Specifications
https://www.fvlight.com/_files/ugd/749b47_485f4f1a51cd4317b8deb88fce642166.pdf
Item Includes
F&V K2000S Power Bi-Color LED Half-Panel (V-Mount)
$ 429.99 $ 189.99
F&V K2000S Power Bi-Color LED Half-Panel (V-Mount)
F&V SKU: 18022203 | Helix SKU: FV18022203
Overview
K2000S Power
Half Size - Full Brightness
Half Size - Full Brightness
With half the surface area in comparison to
the original K4000 Lumic we were able to
achieve a higher brightness than before at
1x1 size (K2000 Power: 2723 lux@1m 75°
beam angle, K4000 Lumic: 2475 lux@1m 60°), making the K2000 Power the perfect portable lightsource.
Perfect Travel Companion
Being compact in size, low in weight and
with a separate battery plate that can be
mounted on the bottom of the light stand
as a counterweight, the K2000 Power is
the perfect travel companion that also
works reliably on lightweight light stands.
New Attachment System
Incorporating the new F&V attachment
system for light shaping accessories, you
can mount light shaping tools like barndoors,honeycomb grids, diffusers, filterholders and softboxes easily and securely to the K2000 Power.
Specifications
https://www.fvlight.com/_files/ugd/749b47_485f4f1a51cd4317b8deb88fce642166.pdf
Item Includes
F&V K4000 Power Daylight LED Studio Panel (V-Mount)
$ 549.00 $ 99.99
F&V K4000 Power Daylight LED Studio Panel (V-Mount)
F&V SKU: 18022103 | Helix SKU: FV18022103
Overview
Maximum Brightness
Utilizing a new lens design, the K4000 Power offers incredible brightness whenever maximum output is needed. Maintaining a 60° wide beam angle the K4000 Power creates up to 7200 lux @ 1m and can still be powered by a single V-Mount battery.
Vibrant Color Reproduction
With a TLCI of up to 99 (97±2) and a CRI of up to 97 (95±2), the Power fixtures raise the color reproduction to new heights, representing colors truthfully, neutral and vibrant.
New Attachment System
Incorporating the new F&V attachment system for light shaping accessories, the Power fixtures are compatible to the full range of tools like barndoors, honeycomb grids, diffusors, filter holders and softboxes.
Specifications
| Barcode | 6949773305179 |
|---|---|
| Manufacturer | F&V |
| Country of Manufacture | China |
| Illuminance | 7200 lux @1m, 1800 lux @2m, 800 lux @3m |
| Color Temperature (CCT) | Daylight 5600K (+/-200K) |
| Beam Angle | 75° (45° Angle with KS-1 Intensifier - Sold Separately) |
| Color Rendition | TLCI 95-99 (97±2), CRI 93-97 (95±2) |
| Dimming | 0-100% Continuous |
| Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
| Thermal Design | Silent Passive Cooling |
| Power Options | V-Mount Battery, AC Adapter, Please note Batteries are SOLD SEPARATELY |
| Power Consumption | 87 W Nominal, 90 W Maximum |
| Power Voltage | 13 - 24 V DC |
| Battery Lifetime | N/A |
| Mounting Options | Yoke with 5/8" Mount |
| Package Contents |
(1x) K4000 Power 1x1 LED Panel Light with V-Mount Plate (1x) V-Mount AC Adapter with Power Cord |
F&V K8000S Plus Bi-Color LED 2-Light Kit (V-Mount)
$ 1,779.00 $ 399.99
F&V K8000S Plus Bi-Color LED 2-Light Kit (V-Mount)
F&V SKU: 109041570231 | Helix SKU: FV109041570231
Overview
The K8000 Plus utilizes the F&V Plus LED. The F&V Plus LED has an accurate color temperature and has a color rendering of CRI 90 +/- 1.0. At a 60° beam angle, 800 LEDs produce a bright, even beam of light which is perfect for shoots both in the studio or on location. The K8000 Plus comes packaged with the noteworthy Milk Diffusion Filter which creates a soft, glamorous light. The Milk Diffusion Filter now utilizes a snap-in, quick-release mounting system. This new mounting system will work in unison with additional accessories, giving users the ability to stack modifiers on top of one another. This secure mounting system allows the light to be rigged sideways or upside down without the possibility of accessories falling or sliding out.
The K8000 Plus has an expansion port which allows for installation of the SmartSync Control Circuit (SCC) as well as a DMX512 Module. The SCC module allows you to daisy chain multiple units together via CAT5 cables. When chained together, any light modified in the chain will cause all the other lights to dim in unison. The DMX512 Module allows for control of the lights with standard DMX512 dimmer boards.
F&V KS-2 Soft Box & Intensifier with Grid for 2x1 LED Panels
$ 128.00 - Vendido
F&V KS-2 Soft Box & Intensifier with Grid for 2x1 LED Panels - FV10310004
F&V SKU: 10310004
Quick Overview
The KS-2 is not only a soft box but also an intensifier. The reflective coating on the inside of the KS-2 focuses the light into a smaller beam angle which increases the brightness of the light up to 25%, while remaining to deliver a soft and even beam of light.
Intensifier for focused brightness
The KS-2 is not only a soft box but also an intensifier. The reflective coating on the inside of the KS-2 focuses the light into a smaller beam angle which increases the brightness of the light up to 25%, while remaining to deliver a soft and even beam of light.
Quick and easy setup
There is no complicated set-up with your KS-2. Just unfold the KS-2, and attach it to your light with two velcro straps.
Universal size
The KS-2 Soft Box can be adjusted to fit a wide variety of 1x2 panels from different manufacturers.
Two diffusion stages
Two diffusion stages allow for soft, even illumination across the face of the KS-2. Use one diffusion stage or both in order to adjust the softness and brightness of your light.
Grid for directional control
The KS-2 Soft Box includes a grid for directional control of your light. The grid attaches easily to the KS-2 via velcro.
| SKU | 10310004 |
|---|---|
| Highlights |
|
| Specs |
Nominal Dimensions of Soft Box Face: 30" x 18" Est. Light Increase without Diffusors: 1/3 stop Est. Light Loss with Close Diffusor: 1 stop (relative to increased brightness of light due to intensifier) Est. Light Loss with Far Diffusor: 1 stops (relative to increased brightness of light due to intensifier) Est. Light Loss with Close and Far Diffusor: 2 stops (relative to increased brightness of light due to intensifier) |
| Package Contents |
(1x) KS-2 Soft Box (1x) Inner Diffuser (1x) Outer Diffuser (1x) Grid (1x) Carry Bag |
F&V L-Bracket for R-300, R-300 SE, and R-300S SE (updated to adjust for larger cameras with grips.)
$ 49.00 - Vendido
F&V L-Bracket for R-300, R-300 SE, and R-300S SE (updated to adjust for larger cameras with grips.)
F&V SKU: 18095000 | Helix SKU: FV18095000
Overview
This updated version of the Camera L-Bracket for the R-300 ring light features and adjustable camera bracket which allows for a larger selection of cameras to be mounted to the R-300 including DSLRs with battery grips. The system attaches to the light with a hex screw. A thumb screw allows you to adjust the camera bracket up and down to fit your camera. This updated L-Bracket is compatible with the original R-300, R-300 SE, and R-300S SE.
Specifications
| Barcode | N/A |
|---|---|
| Manufacturer | F&V |
| Country of Manufacture | China |
| Specifications | N/A |
| Package Contents |
(1x) L-Bracket SE (1x) Mounting Screw (1x) Allen Wrench |
| Product Weight (lb) | N/A |
F&V MDF-1 Milk Diffusion Filter Frame (allows use of barndoors with diffuser)
$ 74.95
F&V MDF-1 Milk Diffusion Filter Frame (allows use of barndoors with diffuser)
F&V SKU: 10316002 | Helix SKU: FV10316002
Overview
The MDF-1 Milk Diffuser Filter Frame is a Milk Diffuser with metal frame which you can attach barn doors (sold separately). The frame snaps into the new quick release mounting system from F&V.
Compatible with the Z400S Soft, K4000 SE, K4000S SE, K4000 Power, and K4000S Power. Older lights are compatible once their corners have been upgraded to the new system.
F&V Milk Diffusion Filter for R-300 Ring Light
$ 25.00 $ 18.00 - Vendido
F&V Milk Diffusion Filter for R-300 Ring Light
F&V SKU: 118151010000 | Helix SKU: FV118151010000
Overview
Using our unique method of mounting filters with magnetics, our Milk Diffusion Filter for the R-300 LED Ring Light is a denser option for diffusion, creating an ultra-soft light source. Not only does this offer beautiful, wrapping light, but also the thick diffusion makes it much easier for your talent to look in the direction of the light.
Specifications
| SKU | 118151010000 |
|---|---|
|
Using our unique method of mounting filters with magnetics, our Milk Diffusion Filter for the R-300 LED Ring Light is a denser option for diffusion, creating an ultra-soft light source. Not only does this offer beautiful, wrapping light, but also the thick diffusion makes it much easier for your talent to look in the direction of the light. |
|
| Highlights |
True Soft-Box Effect Beautiful Light that Wraps Around Your Subject Easier on Your Talents Eyes |
| Specs | No |
| Package Contents | (1x) Milk Diffusion Filter |
| Feature Tags | Magnetic Filters |
F&V NP-F to 3-Stud (AB Gold Mount) Adapter w/ Batteries Kit 121030028001K
$ 143.99 - Vendido
F&V NP-F to 3-Stud (AB Gold Mount) Adapter w/ Batteries Kit 121030028001K
Don't want to spend big bucks on expensive, large-capacity, li-ion batteries? Then try their new NP-F to 3-Stud Adapter. Utilizing the power of 2x NP-F batteries in series, these adapters allow you to power a variety of products, from 1x1 panels to cameras rigs, for hours at a time. This is a perfect solution for powering F&V's K4000 and Z400 LED Studio Panels, but it will also work with almost any 1x1 panel on the market.
Whether utilizing NP-F550 or NP-F770 batteries, this adapter is an inexpensive alternative to power your gear. You can have multiple, inexpensive NP-F batteries on stand-by to ensure you never run out of power. The NP-F to 3-Stud Adapter will most definitely to increase your flexibility when shooting on location. Allows you to adapt Sony NP-F batteries to gear already running on V-mount batteries. Take advantage of the NP-F batteries you have lying around and put them to use.
F&V NP-F to 3-stud Power Adapter (AB Gold Mount) 121030028001
$ 54.99
F&V NP-F to 3-stud Power Adapter (AB Gold Mount) 121030028001
Don't want to spend big bucks on expensive, large-capacity, li-ion batteries? Then try the F&V Lighting NP-F to 3-Stud Power Adapter (AB Gold Mount). Utilizing the power of 2x NP-F batteries in series, this adapter allows you to power a variety of products, from 1x1 panels to cameras rigs, for hours at a time. This is a perfect solution for powering F&V Lighting's K4000 and Z400 LED Studio Panels, but it will also work with almost any 1x1 panel.
Whether utilizing NP-F550 or NP-F770 batteries, this adapter is an inexpensive alternative to power your gear. You can have multiple, inexpensive NP-F batteries on stand-by to ensure you never run out of power. The NP-F to 3-stud Adapter will most definitely to increase your flexibility when shooting on location.
Features
- Allows you to adapt Sony NP-F batteries to gear already running on Anton Bauer/3-stud batteries. Take advantage of the NP-F batteries you have lying around and put them to use
F&V Nylon Carry Case for 1x1 LED Panels
$ 149.00 - Vendido
F&V Nylon Carry Case for 1x1 LED Panels - FV105010210001
Nylon Carrying Case by F&V is designed to fit a quantity of three (3) LED panels in the 1x1 form factor. They Nylon Carrying Case is a hard case with nylon stitching on the outside. The corners and bottom of the case are reinforced with impact plastic. The case comes with two large dividers to separate and protect each light, as well as it comes with three smaller dividers for accessories.
| SKU | 105010210001 |
|---|---|
| Highlights |
Nylon outer fabric over rigid, padded frame Reinforced impact corners and bottom sled Packaged with carrying strap, three (3) large dividers, and three (3) small dividers |
| Specs |
Outside Dimensions: 20" L x 11" D x 18" H Inside Dimensions: 19" L x 9" D x 14.5" H |
| Package Contents |
(1x) Case (1x) Carrying Strap (2x) Large Dividers (3x) Small Dividers |
F&V R-300 Lens Mount System
$ 49.00
F&V R-300 Lens Mount System
F&V SKU: 18095400 | Helix SKU: FV18095400
Overview
This kit enables you to mount your R-300 onto the front of the camera lens. The mount is compatible with the original R-300, R-300 SE, and R-300S SE. The mount consists of five parts. Two halves screw together on each side of the R-300. This base mount has an 82mm thread. The additional parts are step down rings that will allow the light to be mounted on 77mm, 72mm, and 67mm lens filter threads.
Please note: When the light is mounted to your lens we strongly recommend against powering the light with batteries. The added weight to the lens from the battery may have the ability to cause damage to certain lenses. We recommend using an AC Adapter or 2.5mm to D-Tap cable to power the light.
| Package Contents |
(1x) Lens Mount with 82mm Thread (1x) 82mm - 67mm Lens Adapter Ring (1x) 82mm - 72mm Lens Adapter Ring (1x) 82mm - 77mm Lens Adapter Ring |
|---|
F&V R-300 Travel Case
$ 30.00
F&V R-300 Travel Case
F&V SKU: 33905070 | Helix SKU: FV33905070
Overview
This travel case fits the original R-300, R-300 SE, and R-300S SE like a glove. The case is large enough to fit the light, filters, and a small np-f battery. Because of it's compact size, the case does not have enough room to fit the AC Adapter and L-Bracket when the light is inside.
| Package Contents | (1x) Travel Case for R-300 |
|---|
F&V Replacement Dimmer Knob for K4000/K4000S
$ 3.95
F&V Replacement Dimmer Knob for K4000/K4000S
F&V SKU: K4000DIMMERKNOB / Helix SKU: FVK4000DIMMERKNOB
F&V Replacement Quick Release Mounts for Milk Diffusion Filter (4-Pack)
$ 14.95
F&V Replacement Release Mounts for Milk Diffusion Filter (4-Pack)
F&V SKU: 34101272 / Helix SKU: FV34101272
Replacement Quick Release Mounts for Milk Diffusion Filter (4 Pack)
Only works with quick release corners.
F&V Replacement Thumb Screw for 5/8" Receptacle
$ 6.95 - Vendido
F&V Replacement Thumb Screw for 5/8" Receptacle
F&V SKU: 43201031 Helix SKU: FV43201031
(K4000 / R-300 L-Bracket)
F&V Twins Digi 20 LED Light
$ 79.99
F&V Twins Digi 20 LED Light
F&V SKU: Digi 20 | Helix SKU: FVDIGI20
Overview
High brightness, lightweight and durable
Can be powered by F-550, F750, F970 lithium batteries
Suitable for all kinds of digital cameras and Sony DVR
Single lamp and dual lamp adjustable
F-750 battery can power it for 80 minutes
Constant current design
Stable light illumination design
F&V Ultracolor Z200S Soft Bi-color Half-Panel LED Light with AC Adapter (V-Mount)
$ 489.99
F&V Ultracolor Z200S Soft Bi-color Half-Panel LED Light with AC Adapter (V-Mount)
F&V SKU: 18030000 | Helix SKU: FV18030000
Overview
UltraColor is now also UltraSoft
The UltraColor Z200S is the newest member of the F&V Soft panel series that combines bi-color, TLCI 99, brightness, compactness and that is passively cooled and super soft in a small, half-panel format.
Brightness | up to 2200 Lux@1m
The Z400S Soft and the optional intensifier are the perfect team when a powerful soft light is needed. With 901 lux @ 1m and with a beam angle of 130°, the Z400S Soft is already a very bright light. The intensifier concentrates the light into a 50° beam angle, increasing the brightness to an incredible 2200 lux @ 1m (5600K).
Colors as they should be
The UltraColor Soft series offers true color reproduction throughout the complete color temperature range. Rendered with absolute precision, skin tones and colors never looked better. CRI and TLCI measurements only give a small insight into how LED lights render the full spectrum, the UltraColor Soft series can shine beyond those values with a well balanced color response - creating beautiful images. Pure white light with a TLCI of up to 99.
True Softness - Single, Soft & Clean Shadow
The quality of a light is not only defined by its color and brightness, but also how it renders shadows. With a clean, single shadow that wraps nicely around subjects, the UltraColor Soft delivers stunning results. No stepped shadows, no uneven color, just pure soft light.
Specifications
| Barcode | 6949773304523 |
|---|---|
| Manufacturer | F&V |
| Country of Manufacture | China |
| Illuminance | 100% 5600K: 901 lux @1m, 226 lux @2m, 101 lux @3m; 100% 3200K: 796 lux @1m, 199 lux @2m, 89 lux @3m |
| Color Temperature (CCT) | Bi-Color 3200 - 5600K (+/- 200K) |
| Beam Angle | 130 Degrees |
| Color Rendition | TLCI 97 - 99, CRI 96 - 98 |
| Dimming | 0-100% Continuous |
| Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
| Thermal Design | Silent Passive Cooling |
| Power Options | AC Adapter |
| Power Consumption | N/A |
| Power Voltage | 12 - 24 V DC |
| Battery Lifetime | N/A |
| Mounting Options | Yoke with 5/8" Mount |
| Package Contents |
(1x) Z200S Soft UltraColor Light (1x) AC Adapter |
F&V Wired Dimmer - 90" : K4000/K4000S
$ 49.00
F&V Wired Dimmer - 90" : K4000/K4000S
F&V SKU: 10911010 | Helix SKU: FV10911010
Overview
This wired dimmer allows you to control the intensity on the F&V LED Panel Lights that have a serial port on the back. The cable length is 90" allowing the user to be more than 7 feet away from the light.
F&V WR-1 Wifi Wireless Router for Smartphone App Compatibility
$ 129.00
F&V WR-1 Wifi Wireless Router for Smartphone App Compatibility
F&V SKU: 18098600 | Helix SKU: FV18098600
Overview
NEW WIRELESS CONNECTIVITY FOR WIFI ENABLED LIGHTS
The WR-1 Wireless Router creates a Wifi hotspot to allow users to control Wifi enabled F&V lights with the smart phone app. The app can control the intensity of the lights and on the bi-color lights it can control the color temperature. The app also allows you to save pre-sets lighting groups so you can quickly recall the settings.
HIGH TRANSMISSION POWER FOR MAXIMUM REACH
With two antennas and a strong built-in battery, the WR-1 offers unparalleled transmission power and can control F&V panels up to 30m away from the router.
COMPACT AND RUGGED
Protected by an aluminum housing, the WR-1 is rugged and lightweight. With the compact housing the WR-1 never gets in the way.
MULTIPLE MOUNTING OPTIONS
With the included lanyard you can easily carry the WR-1 around your neck so that it is always in close proximity to your modbile device. If you don't want to carry the router around, you can attach it with its built-in magnet to any magnetic surface such as the back of a F&V panel. The lanyard mount can also be removed to reveal a 1/4"-20 female thread as an additional mounting option.
BUILT-IN BATTERY & USB POWER
The built-in lithium-ion battery lasts up to 20 hours and can easily be recharded with the included USB cable. In a fixed environment the WR-1 can be permanently powered via the USB port.
COMPATIBILITY
The WR-1 is compatible with the Z720S and also with any panel light that has the Wifi Module installed.
IOS & ANDROID APP
The easiest way to find the app is by scanning the following QR codes with your iOS or Android mobile phone. To use the Wireless Router turn on the lights and the WR-1. On your smartphone or tablet connect to the Wifi hotspot called F&V_WIFI_2.4G and enter the password found in the manual. Once connected you can start up the app to control the lights.
IOS
ANDROID
WHY CAN’T YOU CONTROL PANELS WITH THE WIFI MODULE DIRECTLY WITH THE F&V APP?
Phones have very limited transmission power because of small integrated antennas and the power fort he antenna is limited to reserve power for other tasks. To provide more reliable control of Wifi enabled lights, F&V has developed the Wifi Wireless Router with long range antennas.
F&V Z1200S UltraColor Bi-Color LED Studio Panel 2-Light Kit (V-Mount)
$ 2,199.00 $ 499.99
F&V Z1200S UltraColor Bi-Color LED Studio Panel 2-Light Kit (V-Mount)
F&V SKU: 109030080231 | Helix SKU: FV109030080231
Overview
The Z1200 UltraColor utilizes the highly accurate F&V UltraColor LED. The F&V Z1200S Bi-Color LED Light Panel Kit has an exceedingly accurate color temperature and has a color rendering index of 95. With the UltraColor LED, F&V guarantees that each LED panel will vary no more than ±100K in color temperature as well as no more than ±1.0 in CRI. The UltraColor LED is the perfect LED for professional shooters and studios that need, without exception, maximum consistency. At a 60° beam angle, 1200 LEDs produce a rich, extremely bright beam of light which is perfect for high precision shoots in the studio or on location. The F&V Z1200S Bi-Color LED Light Panel Kit has the same brightness as three (3) K4000 or Z400 LED panels.
The F&V Z1200S Bi-Color LED Light Panel Kit comes packaged with the noteworthy Milk Diffusion Filter which creates a soft, glamorous light. The Milk Diffusion Filter now utilizes a snap-in, quick-release mounting system. This new mounting system will work in unison with additional accessories, giving users the ability to stack modifiers on top of one another. This secure mounting system allows the light to be rigged sideways or upside down without the possibility of accessories falling or sliding out.
The F&V Z1200S Bi-Color LED Light Panel Kit has an expansion port which allows for installation of the SmartSync Control Circuit (SCC) as well as a DMX512 Module. The SCC module allows you to daisy chain multiple units together via CAT5 cables. When chained together, any light modified in the chain will cause all the other lights to dim in unison. The DMX512 Module allows for control of the lights with standard DMX512 dimmer boards.
Package Contents:
(2) x Z1200 LED Studio Panels
(2) x Milk Diffusion Filter
(8) x Quick Release Rods for Milk Diffusion Filter
(2) x AC Power Adapter
(2) x Power Cable
(4) x Replacment Fuses
(1) x New K8000/Z1200 Carry Case with Wheels
*Light stands NOT included
Specifications
| Bulb: | UltraColor LED |
| LED Count: | 1200 |
| Beam Angle: |
60° |
| Power Variation: | 0-100% (Stepless) |
| Color Rendering Index (Ra): | ≥ 95 ±1.0 |
| Correlated Color Temperature (CCT): | 3200K~5600K ±100K (Bi-color Model) |
| Operating Voltage: | 10-18V DC |
| Nominal Weight: | 8 lb 4 oz / 3.74 kg (excluding AC adapter and batteries) |
| Nominal Size (L x W x H): | 61 x 37.5 x 8 cm (at widest parts, including yoke) |
| Power Options: | Built-in V-mount, AC Power Adapter (AC operation of 90-265VAC 50/60Hz) |
| Power Draw: | 96W |
| Max Current: | 9.6A |
F&V Z180 UltraColor Daylight 5600K LED Video Light
$ 349.00 $ 34.99
F&V Z180 UltraColor Daylight 5600K LED Video Light
F&V SKU: 118123140201 | Helix SKU: FV118123140201
Overview
The Z180 UltraColor 5600K LED Light Panel features 180 daylight-balanced LEDs with a CRI 95. This Z180 UltraColor delivers a bright yet soft, pure-color beam of 1460lx light output. The new, 95 CRI LEDs place the F&V product line at the forefront of technology in the market for LEDs. The high CRI LEDs allow for rich, precise color rendering and flexibility across the wide array of digital video sensors on the market today. By having a high CRI, the Z180's light quality will be perceived in a similar fashion across all sensors with no discernable difference. The high CRI LEDs also offer great color blending when using natural light sources such as daylight or tungsten filaments.
Multiple Z180 units can be linked together via its Expandable Link System, a dovetail attachment system. The lights can mount horizontally or vertically to one another. This linking system makes it easier to transport your lights and is a perfect solution for projects on-location, where carrying large sized lights becomes impractical. When the lights are linked together, the SmartSync Control Circuit allows you to control the intensity of all lights with only one of the light’s dimmer knobs. When the knob of the parent-light is adjusted, all connected lights match the intensity of the parent-light. The versatility of this light will make it a necessity to have in your lighting kit. This light is compact in size allowing for it to fit into small areas, yet with its Expandable Link System, this light can be both big and small.
This light comes with two (2) magnetic filters: one (1) tungsten filter that balances your light to 3200K and one (1) diffusion filter. This light is dimmable from 0-100%. This light has several powering options. It can be powered by its built-in battery plate with a Sony NP-F type battery, by its built in battery compartment with six (6) AA-batteries, or by an external power source via its DCΦ2.5 jack.
Specifications
Bulb: UltraColor LED
LED Count: 180
Light Beam Angle: 65°
Illuminance: 1460 lx
Power Variation: 0-100%
Color Rending Index (Ra): ≥ 95
Correlated Color Temperature (CCT): 5600K (3200K w/ Tungsten Filter)
Operating Voltage: DC 5.8-16.8V
Power Options: Built-in Sony NP-F Battery Plate, 6x AA Batteries, or DCΦ2.5 jack.
Lasting Time: 60mins with NP-F550, 37mins with AA Battery
Mounting: ¼"-20 Female Thread; Kai Arm included in kit
Nominal Weight: 1 lb 1 oz / 482 g (without filters)
Nominal Dimensions: 17.3 x 11.3 x5 (cm)
Package Content:
(1) x Z180 UltraColor Daylight LED Light Panel
(1) x Kai Arm - 10209007
(1) x Z180 Magnetic Tungsten Filter - 33212621
(1) x Z180 Magnetic Diffusion Filter - 33212622
(1) x Operation Manual
(1) x Warranty Card
F&V Z180S UltraColor Bi-Color LED Video Light
$ 369.00 $ 34.99
F&V Z180S UltraColor Bi-Color LED Video Light
F&V SKU: 118123150201 : Helix SKU: FV118123150201
Overview
The Z180S UltraColor Bi-Color LED Light Panel features 180 LEDs with a CRI 95. Of the 180 LEDs, 90 LEDs are daylight-balance and 90 LEDs are tungsten balanced. The Z180S Bi-Color UltraColor delivers a bright yet soft beam of 1380lx light output. The new, 95 CRI LEDs place the F&V product line at the forefront of technology in the market for LEDs. The high CRI LEDs allow for rich, precise color rendering and flexibility across the wide array of digital video sensors on the market today. By having a high CRI, the Z180S's light quality will be perceived in a similar fashion across all sensors with no discernable difference. The high CRI LEDs also offer great color blending when using natural light sources such as daylight or tungsten filaments.
The Z180S has both a designated intensity dimmer knob and a designated CCT knob. Control the color temperature of this light by turning the CCT knob to the left or right. The color temperature of the light will transition smoothly from tungsten to daylight balanced light. The intensity dimmer knob controls the intensity of the light from 0-100%.
Multiple Z180S units can be linked together via its Expandable Link System, a dovetail attachment system. The lights can mount horizontally or vertically to one another. This linking system makes it easier to transport your lights and is a perfect solution for projects on-location, where carrying large sized lights becomes impractical. When the lights are linked together, the SmartSync Control Circuit allows you to control the intensity and CCT of all lights with only one of the light’s dimmer knobs. When the knob of the parent-light is adjusted, all connected lights match the intensity of the parent-light. The versatility of this light will make it a necessity to have in your lighting kit. This light is compact in size allowing for it to fit into small areas, yet with its Expandable Link System, this light can be both big and small.
This light comes with one magnetic Frost diffusion filter. This light is dimmable from 0-100%. This light has several powering options. It can be powered by its built-in battery plate with a Sony NP-F type battery, by its built in battery compartment with six (6) AA-batteries, or by an external power source via its DCΦ2.5 jack.
Highlights
- 95 CRI
- Bi-color: Variable from 3200K to 5600K
- Illuminance: 1380 lx
- Multiple Power Options
- Dimmable: 0-100%
- Expandable Link System
- SmartSync Control Circuit
Specifications
Bulb: UltraColor LED
LED Count: 180
Light Beam Angle: 65°
Illuminance: 1380 lx At Full Blend
Power Variation: 0-100%
Color Rending Index (Ra): ≥ 95
Correlated Color Temperature (CCT): Variable CCT. Blend from 3200K to 5600K
Operating Voltage: DC 5.8-16.8V
Power Options: Built-in Sony NP-F Battery Plate, 6x AA Batteries, or DCΦ2.5 jack.
Lasting Time: 60mins with NP-F550, 37mins with AA Battery
Mounting: ¼"-20 Female Thread; Kai Arm included in kit
Nominal Weight: 1 lb 1 oz / 482 g (without filters)
Nominal Dimensions: 17.3 x 11.3 x 5 (cm)
Package Contents:
(1) x Z180S Bi-Color LED Light Panel
(1) x Kai Arm
(1) x Z180 Magnetic Diffusion Filter
(1) x Operation Manual
(1) x Warranty Card
Feature Tags:
1000+ lx, 5600K, 3200K, Bi-Color, Magnetic Filters, AA Powered, NP-F Powered, DC Powered, Multiple Power Options, Expandable, SmartSync
F&V Z400S UltraColor Bi-color LED Studio Panel (V-mount) 109030040231
$ 819.00 $ 149.99
F&V Z400S UltraColor Bi-color LED Studio Panel (V-Mount)
F&V SKU: 109030040231 | Helix SKU: FV109030040231
Overview
The Z400 UltraColor utilizes the highly accurate F&V UltraColor LED. The F&V UltraColor LED has an exceedingly accurate color temperature and has a color rendering index of 95. With the UltraColor LED, F&V guarantees that each LED panel will vary no more than ±100K in color temperature as well as no more than ±1.0 in CRI. The UltraColor LED is the perfect LED for professional shooters and studios that need, without exception, maximum consistency. At a 60° beam angle, 400 LEDs produce a rich, bright, even beam of light which is perfect for high precision shoots in the studio or on location.
The Z400 UltraColor comes packaged with the noteworthy Milk Diffusion Filter which creates a soft, glamorous light. The Milk Diffusion Filter now utilizes a snap-in, quick-release mounting system. This new mounting system will work in unison with additional accessories, giving users the ability to stack modifiers on top of one another. This secure mounting system allows the light to be rigged sideways or upside down without the possibility of accessories falling or sliding out.
The Z400 UltraColor has an expansion port which allows for installation of the SmartSync Control Circuit (SCC) as well as a DMX512 Module. The SCC module allows you to daisy chain multiple units together via CAT5 cables. When chained together, any light modified in the chain will cause all the other lights to dim in unison. The DMX512 Module allows for control of the lights with standard DMX512 dimmer boards.
Specifications
Bulb: UltraColor LED
LED Count: 400
Beam Angle: 60°
Power Variation: 0-100% (Stepless)
Color Rendering Index (Ra): ≥ 95 ±1.0
Correlated Color Temperature (CCT): 5600K ±100K (Daylight Model) / 3200K~5600K ±100K (Bi-color Model)
Operating Voltage: 10-18V DC
Nominal Weight: 5 lb 1 oz / 2300 g (excluding AC adapter and batteries)
Nominal Size (L x W x H): 34.9 x 37.5 x 8.3 (cm)
Power Options: Built-in V-mount or Anton Bauer Battery Plate, AC Power Adapter (AC operation of 90-265VAC 50/60Hz)
Power Draw: 32W
Max Current: 3.2A
Package Contents:
(1) x Z400 Daylight LED Studio Panel
(1) x Milk Diffusion Filter
(4) x Quick Release Rods for Milk Diffusion Filter
(1) x V-Mount or Anton Bauer AC Power Adapter (Respective to customer selection)
(1) x Power Cable
(2) x Replacment Fuses
F&V Z720 UltraColor Daylight LED Ring Light
$ 949.00 $ 749.00
F&V Z720 UltraColor Daylight LED Ring Light
F&V SKU: 10903009 | Helix SKU: FV10903009
Overview
As part of the UltraColor series of LED lights, the Z720 is guaranteed to measure at a TLCI of 95 ± 1. This level of accuracy endows the user with confidence that all lights will perform at a professional level, day in and day out.
The Z720 has a 290mm center opening that allows it to be used with any size cinema lens. Mounting options for 15mm LWS and 19mm Studio ensure that the Z720 will seamlessly integrate into your professional, cinema work flow. A 5/8" mounting option allows you to attach the Z720 to a stand which is ideally suited for photographers.
Due to its large size, the Z720 not only creates gorgeous catchlights in the eyes of your talent, but also it wraps around their face with even, beautiful illumination. To further empower your creativity, the Z720 is broken into four quadrants, each of which can be controlled independently. The ability to uniquely modify the intensity and color temperature* of each quadrant allows you to make one of a kind catchlights with unparalleled ease.
Reap all the benefits the Z720 has to offer. When you're not in need of a ring light, the incredible power of the 720 LEDs allows you to use the light off camera as a standalone LED fixture. A soft box accessory allows you to shape and soften your light for a wide variety of applications. Additionally, the unit can be powered by two, NP-F Li-ion batteries which means you can take it anywhere you go.
Highlights:
290mm Center Opening
With a center opening of 290mm the benefit of the Z720's large form factor is two fold. Not only will the Z720 work with the largest cinema lenses, but also it will create large, beautiful catchlights in the eye of your subject.
TLCI 95 ± 1
The Z720 utilizes F&V's latest LED technology, the UltraColor LED. A precise coating technique and a meticulous review process ensures that UltraColor LED delivers accurate results every time. In fact, we guarantee it. Our UltraColor LED is rated at a TLCI 95 ± 1
Independent Quadrant Control
The Z720's circuitry is divided into four quadrants. This gives each quadrant independent control over intensity and CCT. Create distinctive catchlights with the press of a button.
WiFi Control
Wirelessly control your Z720 with your phone or the designated WiFi remote controller. Dial in both intensity and color temperature with precision everytime and save scenes for easy recall.
Battery Powered
The Z720 is the perfect companion on the road. The unit can be powered by two, small, NP-F Li-ion batteries.
19mm and 15mm Support
The Z720 was built with the professional cinematographer in mind. Industry standard mounting options will allow the Z720 to be used for productions both big and small.
Specifications
Specifications
Correlated Color Temperature: 5600K ±150K (Daylight Model) / 3200K~5600K ±150K (Bi-color Model) [Customer chooses model on product page]
Illumination (Lux@1m): Daylight Model: 3010 lx, Bi-color Model: 2746 lx (D:1505 lx, T:1241 lx)
Beam Angle: 60º
TLCI:95 ± 1.0
Color Rendering Index (Ra):95 ± 1.0
Power Variation: 0-100%
Power Supply: 2* Sony NP-F Battery Plate / DC2.5 Jack
Inside Diameter: 290mm
Item Includes
Package Contents
(1) x Z720 UltraColor LED Ring Light
(1) x Milk Diffusion Filter
(1) x Tungsten Filter (Daylight Model Only)
(1) x Frost Diffusion Filter
(1) x 15mm LWS / 19mm Studio 2-in-1 Rail Mount
(1) x 5/8" Mount
(1) x D-Tap Power Cable
(1) x AC Power Adapter
(1) x Carry Bag
F&V Z720S UltraColor Bi-color LED Ring Light
$ 999.00 $ 899.00
F&V Z720S UltraColor Bi-color LED Ring Light
F&V SKU: 10903010 | Helix SKU: FV10903010
Overview
As part of the UltraColor series of LED lights, the Z720S UltraColor LED Ring Light is guaranteed to measure at a TLCI of 95 ± 1. This level of accuracy endows the user with confidence that all lights will perform at a professional level, day in and day out.
The Z720S UltraColor LED Ring Light has a 290mm center opening that allows it to be used with any size cinema lens. Mounting options for 15mm LWS and 19mm Studio ensure that the Z720 will seamlessly integrate into your professional, cinema work flow. A 5/8"""" mounting option allows you to attach the Z720 to a stand which is ideally suited for photographers.
Due to its large size, the Z720S UltraColor LED Ring Light not only creates gorgeous catchlights in the eyes of your talent, but also it wraps around their face with even, beautiful illumination. To further empower your creativity, the Z720 is broken into four quadrants, each of which can be controlled independently. The ability to uniquely modify the intensity and color temperature* of each quadrant allows you to make one of a kind catchlights with unparalleled ease.
Reap all the benefits the Z720S UltraColor LED Ring Light has to offer. When you're not in need of a ring light, the incredible power of the 720 LEDs allows you to use the light off camera as a standalone LED fixture. A soft box accessory allows you to shape and soften your light for a wide variety of applications. Additionally, the unit can be powered by two, NP-F Li-ion batteries which means you can take it anywhere you go.
Specifications
Correlated Color Temperature: 5600K ±150K (Daylight Model) / 3200K~5600K ±150K (Bi-color Model) [Customer chooses model on product page]
Illumination (Lux@1m): Daylight Model: 3010 lx, Bi-color Model: 2746 lx (D:1505 lx, T:1234 lx)
Beam Angle: 60º
TLCI:95 ± 1.0
Color Rendering Index (Ra):95 ± 1.0
Power Variation: 0-100%
Power Supply: 2* Sony NP-F Battery Plate / DC2.5 Jack
Inside Diameter: 290mm
Package Content:
(1) x Z720 UltraColor LED Ring Light(1) x Milk Diffusion Filter
(1) x Tungsten Filter (Daylight Model Only)
(1) x Frost Diffusion Filter
(1) x 15mm LWS Rail Mount
(1) x 19mm Studio Rail Mount
(1) x 5/8"" Mount
(1) x D-Tap Power Cable
(1) x AC Power Adapter
(1) x Carry Bag
