$ 249.00
Rode SKU: Lavalier | Helix SKU: RMLavalier
The RØDE Lavalier is a discreet lapel microphone that provides broadcast-quality audio when close-miked in almost any scenario.
The Lavalier's low self-noise, user friendly omni-directional polar pattern and minimal appearance make it an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen.
The microphone capsule is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the included cable management clips ensure that you are able to minimise the microphone and cable visibility, while providing maximum mobility for the wearer.
The supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories.
Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the Lavalier and a wide range of wireless systems as well as consoles, cameras and portable recorders.
The RØDE Lavalier lapel microphone is designed and made in Australia and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement microphone during the extended warranty period.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter |
Capsule | 0.10" |
Address Type | End |
Frequency Range | 60Hz - 18kHz |
Output Impedance | 3000Ω |
Maximum SPL | 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 189.0mV |
Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 25dB-A |
Weight | 1.00gm |
Dimensions | 12.00mmH x 4.50mmW x 4.50mmD |
Warranty | 1 year with free extension to 5 years following registration |
IN THE BOX:
$ 249.00 - Vendido
Rode SKU: PinMic-Long | Helix SKU: RMPinMicLong
Unique lapel style 'pin-through' microphone that attaches to clothing and fabric almost anywhere. Long pin version.
The RØDE PinMic™ is a discreet lavalier/lapel microphone with an innovative pin-through design that is not only easier to conceal than a traditional lapel microphone, but provides greater mounting versatility.
Comprised of a cabled backplate and a removable omni-directional capsule head, the PinMic™ is easily mounted onto any clothing or fabric by simply pushing the backplate pins through the back of the fabric and sliding the capsule into place on the front. The microphone backplate and cable are hidden behind the fabric, and the capsule head can be easily disguised, covered or decorated to further conceal the microphone.
The PinMic™ capsule is discrete at only 9mm deep and 11mm in diameter, and is supplied with both a black and an unpainted silver mesh head that can be further camouflaged by painting.
The microphone easily mounts through any fabric up to 1.5mm (0.006") thick without any damage to clothing. A longer pin version (PinMic-Long) is available for mounting on thicker fabrics (up to 3.5mm/0.14" thick).
The microphone capsule is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested to ensure reliable performance.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, while the anti-trauma water resistant case provides rugged and secure protection for the microphone, a spare capsule head, the microphone cable and included accessories.
The PinMic™ is an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen.
Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the PinMic™ and a wide range of wireless systems as well as consoles, cameras and portable recorders.
The RØDE PinMic™ lapel microphone is designed and made in Australia and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement microphone during the extended warranty period.
Acoustic Principle |
Pressure Gradient |
Active Electronics |
JFET impedance converter |
Capsule | 0.10" |
Polar Pattern | |
Address Type | End |
Frequency Range | 60Hz - 18kHz |
Output Impedance | 3000Ω |
Maximum SPL | 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 189.0mV |
Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 25dB-A |
Power Options |
+48V phantom power required from mixer or interface
|
Weight | 10.00gm |
Dimensions | 16.00mmH x 22.00mmW x 33.00mmD |
Output | |
Warranty | 1 year with free extension to 5 years following registration |
$ 79.00 - Vendido
Rode SKU: amart Lav+ | Helix SKU: RMsmartLavP
The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.
With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RØDE Rec app for iOS, or any other audio app of their choice.
By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.
A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ‘b’, ‘t’ and ‘p’ sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar® reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.
The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RØDE’s RØDE Rec app for Apple iOS devices. RØDE Rec turns the user’s iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.
Acoustic Principle | Permanently Polarise |
Active Electronics | JFET |
Capsule | 0.10" |
Polar Pattern | |
Address Type | End |
Frequency Range | 60Hz - 18kHz |
Output Impedance | 3Ω |
Maximum SPL | 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 189.0mV |
Sensitivity | -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 27dB-A |
Weight | 6.00gm |
Dimensions | 1180.00mmH x 4.50mmW x 4.50mmD |
Output | |
Warranty | 1 year |
smartLav+ Lavalier microphone for smartphones |
|
LAV-CLIP Microphone Mounting Clip |
|
WS-LAV Pop Filter/Wind Shield |
$ 399.00 - Vendido
RØDE SKU: RODElink Film Maker Kit | Helix SKU: RMRODEFilmMakerKit
RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDE’s omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.
Transmission type | 2.4GHz Fixed Frequency Agile System |
System dynamic range | 112dB |
Range (distance) | Up To 100m |
Frequency range | 35Hz - 22kHz |
Maximum output level | 1v Rms (2.8v P-p) |
Max input signal level | 1v Rms (2.8v P-p) |
Max latency | 4ms |
Power source | 2 X AA Battery Or MicroUSB |
Antenna | Internal |
Input connection | 3.5mm TRS Locking Jack Socket - Dual Mono |
Input impedance | 300Ω |
Dimensions | 111mm X 65mm X 52mm |
Weight | 190gm |
Power source | 2 X AA Battery Or MicroUSB |
Antenna | Internal |
Input connection | 3.5mm TRS Locking Jack Socket |
Input impedance | 10kΩ |
Dimensions | 111mm X 65mm X 40mm |
Weight | 190gm |
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter |
Capsule | 0.10" |
Address Type | End |
Frequency Range | 60Hz - 18kHz |
Output Impedance | 3000Ω |
Maximum SPL | 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 189.0mV |
Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 25dB-A |
Weight | 1.00gm |
Dimensions | 12.00mmH x 4.50mmW x 4.50mmD |
$ 125.00 - Vendido
Mfr SKU: DK4B | Helix SKU: SRDK4B
The Saramonic DK4B is a premium broadcast lavalier microphone for wireless systems that will greatly enhance the sound quality of your productions with its truly excellent sonic performance. Its omnidirectional polar pattern provides 360-degrees of sound pickup and is ideal for capturing natural sounding dialog for video productions, interviews, speech and many other applications and perfect for acoustic instruments. Deigned with a flat, low-profile form factor and a premium, professional look. It is visually unobtrusive and looks great on camera when exposed and easily is concealed. Perfect for taping under clothing and hiding in hair or on costumes. Wide and Warm Sound The DK4 lavalier is specially designed to enhance the character of dialog and capture the detailed subtleties of musical instruments. It delivers a crisp, full-frequency response with refined, smooth sound and warmth of tone. It features a wide pick-up response, both direct and off-axis from the microphone capsule, enhancing sensitivity and minimizing unwanted noise. Perfect Sound Anywhere It doesn’t matter if you’re using the DK4 indoors in a quiet room or outside in a storm—you’re always going to get perfect sound because every critically important windscreen accessory you need are all included. The microphone, clips and all four included windscreens all fit neatly into pockets in the included compact soft-shell case. Designed with Care It’s the little things that make a big difference in the quality of a product, and the DK4 is loaded with them. Good examples of this are the form-fitted, slide-in mic clips that keeps the DK4 securely in place, even when the cable is jerked on. And the elastic fastening clips on the furry windscreens, allowing you to wrap the windscreen closely to the mic for added protection from the wind, and to prevent it from falling off. For Sony Wireless The locking gold-plated 3.5mm connector is compatible with Sony UWP, UWP-D and WRT series wireless transmitters. |
Premium low-profile lavalier microphone for wireless and recorders designed for broadcast and instruments that delivers superior sound quality and advanced sonic performance |
Tailored frequency response designed to enhance the character and intelligibility of speech, and detailed subtleties of musical instruments |
Omnidirectional pickup pattern is ideal for capturing natural sounding dialog for broadcast video and audio productions |
Premium included accessory suite includes: 2x foam windscreens, 2x furry high-wind windscreens, 2x alligator-style mic clips and a lightweight yet protective case |
Locking 3.5mm connector compatible with Sony UWP, UWP-D and WRT series wireless system belt pack transmitters |
Acoustic Principle: Electret Condenser
Polar Pattern: Omnidirectional
Sensitivity: -40±2dB RL=2.2KΩ Vs=2.0V( 1KHz 0dB=1V/Pa)
Frequency Range: 20Hz to 16kHz
Max Input SPL :105dB
Signal-to-Noise Ratio: 58dB or more
Output Impedance: Max. 2.2KΩ 1KHz (RL=2.2KΩ)
Operating Temperature: -20°C - 60°C
Connector: Gold-Plated Locking 3.5mm
Cable Length: 70.87” (180cm)
Weight: 0.49oz (14g)
Compatible Wireless Transmitters:
Sony: UWP, UWP-D and WRT Series Transmitters
Sony: PMC-A10, PMC-D10, PMC-D50, PMC-D100, PMC-D1
1 x DK4B Low-Profile Omnidirectional Lavalier Microphone
2 x Fitted Slide-In Alligator-Style Mic Clip
2 x Foam Windscreens
2 x High-Wind Furry Windscreens with Elastic Fastening Clasps
1 x Reusable Cable Wrap
1 x Protective Soft-Shell Case with 2 Mesh Pockets
1 x Carabiner Clip
1 x Warranty Card