Kupo Max Arm with Hand Wheel KG100911
$ 102.95
The Max Arm with Hand Wheel is identical to the Max Arm with Adjustable Handle (KG100211) except it has a big hand wheel to adjust the tension as opposed to the ratcheted handle.
Kupo Max Arm, KG100211
$ 102.95
The Max arm is specially designed for lighting, video, film and photography. It's an adjustable arm that allows you to position a camera, lighting fixture or accessory in any position within seconds! The two 5/8 (16mm) studs at either end are attached to ball joints rotate 360 degrees, plus a cut-out in the sleeve surrounding the joint allows the stud to be bent at a 90 degree angle. One stud is tapped to receive a 3/8 -16 thread, while the other is tapped to receive 1/4 - 20 thread. Each stud has six milled flat surfaces, so whatever you mount on the Max Arm will not rotate. The central elbow rotates 360 degrees for infinite adjustability. The Max Arm is equipped with user-replaceable special friction discs with anti-slip rosettes prevent unwanted movement. The adjustable ratcheted handle slowly increases tension until all three joints lock at once making precise positioning a breeze.
Kupo Mini Flex Arm with Alligator Clip, KD700912
$ 28.95
The KD700912 is a mini flex arm with a 3/8-16 female thread inside a baby 5/8 (16mm) adapter on one side and an alligator clip on the other. It's the perfect accessory to hold small items such as a mini flag or reflector. The KD700912 is 11.4 (29mm) in length.
Kupo Off Camera Flash Alli Clamp KG302511
$ 69.95
This incredibly handy accessory consists of an Alli Clamp with a mini ball head and hot shoe enabling the user to mount and position an on-camera flash virtually anywhere in seconds!
Kupo Owl Cable Clips, 4 Pack
$ 5.39
Kupo Owl Cable Clips, 4 Pack
Kupo Petite Clamp for Baby for 5/8 Inches (16mm) Tubing KG600712
$ 26.95
The Petite Clamp uses accessories from the 3 &; 4 Way Clamp system and allows you to mount them easily onto any grip arm or 5/8" (16mm) tubing
Kupo Pincer Clamp with 3/8-Inch-16F & 1/4-Inch-20F, KG702711
$ 25.00
The Pincer Clamp is a mini version of the Convi Clamp that's super lightweight and compact only weighing 4.58 oz (130 g). The specially formulated pads that line the jaws provide a strong grip on round and rectangular shapes. The Pincer Clamp is tapped with both 1/4'' and 3/8'' threads, ideal for mounting all cameras, lights, monitors and accessories weighing up to 11 lbs (5 Kg).
Kupo Scraper with Baby 5/8-Inch (16mm) Stud, KG003812
$ 17.00
The Scraper is stiff bladed putty knife with a built in baby 5/8 (16mm) stud. The 0.04 (1.1mm) thin metal blade is designed for jamming into the gap between a door and its frame, placed under a stack of books or between two books on a shelf, clamped to a ladder step, etc. The baby 5/8 (16mm) stud has a safety indentation for securely hanging small lighting fixtures. There are three holes drilled into the blade designed as anchor points for mounting by screws or nails.
Kupo Swivel Extension Arm, Hex Stud to 5/8-Inch (16mm) Receiver, KG001712
$ 35.95
The KG001712 is a mini extension arm with a hexagonal stud on one side, designed for the Convi and Super Viser clamps, and a baby 5/8 (16mm) receiver on the other. It has a double ball elbow joint giving you the ability to articulate the two sides in any direction.
Kupo Tilting Umbrella Adapter with KG000912 & KG001112 Studs KG007012
$ 42.95
This adapter enables you to use an umbrella with light fixtures that don't have a place to accept an umbrella shaft.
Kupo Tiny Clamp with 1/4 Inches-20 M KG300912
$ 14.95
This little clamp is a grip arm's best friend! It consists of a 1/4"-20 male thread on one side and a small receiver to accept any stud or tubing up to 5/8" (16mm) in diameter. This is the perfect accessory to mount monitors, off camera flashes, etc.
Kupo Universal 5/8-Inch (16mm) Stud, 3/8-Inch-16 M and 1/4-Inch-20 M Threads, KG001212
$ 10.59
The KG001212 is a universal double-sided, baby 5/8 (16mm) stud with 1/4-20 male thread on one side and a 3/8-16 thread on the other. The stud is round and will fit into any 5/8 (16mm) receiver. The KG001212 is the replacement stud for the Kupo light stands KS040111 KS040111. The KG001212 is made from brass.
Manfrotto 035 Super Clamp without Stud - Replaces 2915
$ 36.99 - Vendido
This is an Ideal clamp for many photographic applications. Utilizing an ergonomic lever to securely lock clamping position, it clamps easily and securely. This replaces the Manfrotto 2915. Attachment (bottom): 16mm hexagonal + M5 & 1/4" threads; clamp range - max. (round tube): 2.17 in.; clamp range - min (round tube): 0.51 in.; color: black; load capacity: 33.07 lbs.; material: aluminum; weight: 0.90 lbs.
Manfrotto 035RL Super Clamp with 2908 Standard Stud - Replaces 2900 - Black
$ 35.99 - Vendido
The original Super Clamp that has thousands of uses. No camera bag should be without one. The Super Clamp holds just about everything: cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps! And they hold these items to just about everything: poles, posts, tripod legs, pipes, doors, stands, and beams - virtually any support you can get the Super Clamps wide jaws around. This clamp replaces the Manfrotto 2900.
Manfrotto 038 Double Super Clamp
$ 75.99 - Vendido
This is a special spigot for the De Sisti & laniro lighting fixture.
Manfrotto 041 L-Bracket Shelf Holders - Replaces 2901 (Set of 2)
$ 20.50 - Vendido
this is a set of two brackets to use in combination with Super Clamp 035 to support shelves, etc. This replaces the Manfrotto 2901. color: black; depth: 1.57 in.; length: 6.69 in.; material: aluminum; weight: 0.64 lbs.
Manfrotto 061 Joining Stud for Super Clamps - Replaces 2913
$ 7.18 - Vendido
This Joining Stud is a great accessory for your Manfrotto Super Clamps. This Connects 2 Super Clamp 035 with 6 step fixed rotation for great flexibility in adjustment. This replaces the Manfrotto 2913. Material: aluminum; weight: 0.06 lbs.
Manfrotto 066 Double Female Stud for Super Clamp - Replaces 3113
$ 7.18 - Vendido
This Double Female Stud Plugs into Super Clamp 035 to provide either a 3/8" or 1/4" female thread fixing. this replaces the Manfrotto 3113. Attachment: 1/4" female thread; attachment 2: 3/8" female thread; material: brass; weight: 0.06 lbs.
Manfrotto 143 Magic Arm Kit with Umbrella Bracket Super Clamp and Backlite Base
$ 194.99 - Vendido
This kit consists of an articulated arm with centre lever to lock all 3 movements and is supplied with a Camera/Umbrella Bracket 143BKT, Super Clamp 035 and Backlite Base 003. This kit gives the ultimate in flexibility for positioning your camera or a small light. Attachment: 16mm with 1/4" female attachment; attachment 2: 16mm with 3/8" female attachment and Camera Bracket; color: black; length: 20.87 in.; load capacity: 6.61 lbs.; material: aluminum; weight: 5.62 lbs.
Manfrotto 196AC Universal Clamp for Articulated Arm and Magic Arm (Black)
$ 22.55
Attach an articulated or magic arm to items 2 mm to 16 mm thick. clamp range - max. (round tube): 0.63 in.; clamp range - min (round tube): 0.08 in.; color: black; material: steel; weight: 0.13 lbs. This replaces the Manfrotto 2938.
Manfrotto 196B-2 143BKT 2-Section Single Articulated Arm with Camera Bracket (Black)
$ 59.99 - Vendido
This is a more versatile version of Bogens single articulated arm. A telescopic features makes this product even more compact than before and a camera bracket allows precise camera angles. Arm tube diameters: 13mm.; attachment (bottom): 16mm spigot with 1/4-Inch thread; camera bracket with 16mm spigot and camera attachment; color: black; load capacity at maximum extension: 3.31 lbs. material: aluminum; maximum length: 23.82 in.; 2 sections; weight: 1.17 lbs.
Manfrotto 237HD Heavy-Duty Flex Arm for Super Clamp (Black)
$ 47.99 - Vendido
This Flexible arm gives infinite positioning and is designed to work in conjunction with the SuperClamp system. Attachment: 16mm.; attachment 2: type 18; color: black; diameter: 0.71 in.; length: 21.65 in.; load capacity: 1.10 lbs.; material: brass material; weight: 1.57 lbs.
Manfrotto 244 Variable Friction Magic Arm with Camera Bracket - Replaces 2929
$ 151.99 - Vendido
This Manfrotto Variable Friction Magic Arm with Camera Bracket features a large center locking knob. Variable friction and locking of arm obtained by adjusting knob. Comes complete with Camera/Umbrella Bracket 143BKT only. This replaces the Manfrotto 2929. Arm length: 20.87 in.; arm tube diameters: 20mm.; attachment: type 17; attachment 2: type 17.; color: black; load capacity: 6.61 lbs.; material: aluminum; weight: 2.40 lbs.
Manfrotto 244N Variable Friction Magic Arm without Camera Bracket (Black)
$ 134.99 - Vendido
Articulated arms are a great accessory for any studio application.. Features as 143N, but a large locking knob takes the place of the cam-lever. Variable friction and locking of arm obtained by adjusting knob. Arm tube diameters: 20mm.; attachment: type 17; attachment 2: type 17; black color; load capacity: 6.61 lbs. material: aluminum; weight: 2.40 lbs.
Manfrotto 296 Photo Clamp with 3/8-Inch Tip - Replaces 3287
$ 36.00
This Manfrotto Photo Clamp can be fixed to surfaces up to 60mm thick. Has 2 x 3/8" male threads for mounting ball head and camera. This replaces the Manfrotto 3287. Attachment: 3/8'' screw; clamp range - max (rectangular tube): 2.36 in.; color: black; diameter: 1.97 in.; material: aluminum; weight: 0.31 lbs.
Manfrotto 2965 Heavy Duty Swiveling C Clamp
$ 128.99 - Vendido
Adjustable jaw from 28 to 78mm. 360° locking swivel. Rotating mounting attachment. Max load on 1 1/8" attachment: 75 kg Max load on 5/8" attachment: 10 kg.
Manfrotto 635 Quick-Action Super Clamp (Black)
$ 63.99 - Vendido
A great update to a traditional favorite, the rapid action locking jaw has also been applied to the most well known clamp in the world, the original Super Clamp. These modifications allow us to keep its extreme versatility adding unrivaled speed in locking and unlocking. Supplied with wedge to allow the clamp to fit on flat surface. Attachment (bottom): 16mm hexagonal and M5 and 1/4-Inch threads; clamp range - max. (round tube): 0.51 in.; clamp range - min (round tube): 2.17 in.; color: black; load capacity: 33.07 lbs.; material: aluminum; weight: 1.04 lbs.
Manfrotto Adjustable Mounting Bracket
$ 32.99
The Manfrotto Adjustable Mounting Bracket is a part of the Bogen/IFF Studio Rail System. It allows height differences in ceilings of maximum 2cm; combining two brackets you can compensate for differences of maximum 4cm.
Manfrotto FF3276 Steel Safety Cable
$ 17.43 - Vendido
The Bogen/Manfrotto FF3276 Steel Safety Cable is a failsafe system for grip equipment that fails to hold to overhead mounted lighting fixtures. One end attaches to the fixture; the other is tethered to a rail, pipe, ceiling, or wall. It will hold 44 lbs (22kg) and comes complete with spring catch and hook-up slot. It is recommended for telescopic post or top pantograph in order to avoid accidental falling of equipment.
Manfrotto Mounting Bracket Ceiling Fixture for Overhead Lighting Systems, (0940)
$ 14.35 - Vendido
Drop ceiling supports are used to attach the fixed rails where the height of the ceiling or support surface would leave the rails too far from the floor level, if mounted with the standard fittings.
Photogenic 30" Upright Column with 5/8" Top & 1/4 x 20 Screw Thread, 3 Section with 2 Risers, Fits FB12 Base, Chrome.
$ 39.95
Three-foot telescoping air-cushioned upright column. Constructed from medium gauge aluminum, with a brushed anodized finish. Furnished with a 5/8" adapter with 1/4 x 20 threaded top, and a thumb screw to secure over 5/8" adapters. For use with FB12 folding base with 5/8" adapter, as shown here.
Photogenic Adjustable Counterweight for Powerlights (PLCW)
$ 66.95
Adjustable counterweight for weight balancing of PowerLight when fitted with accessories.
Pipe Clamp with 5/8" Stud
$ 29.99 - Vendido
This pipe clamp will allow you to mount monolights, LEDs, or any device with a 5/8" mount. The clamp will fit onto pipes or tables up to 1.75 inches thick. The clamp features two mounting points: a 5/8" stud at the end, and a 3/8"16 female thread at the back of the clamp.
Plastic Swivel Umbrella Adapter
$ 33.00
The plastic swivel umbrella adapter attaches to stands that have a 5/8" stud. It enables the adjusting of pan and tilt for a light and most importantly it has a receiver for holding an umbrella. The Holder has two, two-way 5/8"; female receivers on the top and bottom. Both receivers can be used either vertically or horizontally, whether being mounted vertically on a stud or horizontally on the arm of a c-stand.
Right Angle Baby Plate
$ 24.95
This wall plate contains a 5/8" baby stud bent at a 90 degree angle, with eight mounting holes for screws or nails.
Studio-Assets 1" A Clamp SA1887
$ 1.95 - Vendido
You'll find hundreds of uses for the 1" A Clamp. The all-metal spring clamp features protective plastic coverings on the handles and clamp tips so they won't scratch nor cut into foam boards.
Studio-Assets 2" A Clamp
$ 2.95 - Vendido
You'll find hundreds of uses for the 2" A Clamp. The all-metal spring clamp features protective plastic coverings on the handles and clamp tips so they won't scratch nor cut into foam boards.
Studio-Assets 2.5" Grip Head (Black)
$ 24.95
This 2.5" Grip Head allows you to attach arms, flags, or other accessories to C-stands and poles. The head has four different size grip holes allowing it to clamp onto a variety of different sizes pole, arms, and mounts. The large handle with roller bearings enables you to apply a lot of torque for maximum grip.
Studio-Assets 2.5" Grip Head (Silver)
$ 24.95
This 2.5" Grip Head allows you to attach arms, flags, or other accessories to C-stands and poles. The head has four different size grip holes allowing it to clamp onto a variety of different sizes pole, arms, and mounts. The large handle with roller bearings enables you to apply a lot of torque for maximum grip.
Studio-Assets 20" Arm for Grip Head (Black)
$ 12.95 - Vendido
This 20" Arm is made of steel and can be used with a grip head as a short boom to hold flags, gobos, lights, or other accessories.
Studio-Assets 20" Arm for Grip Head (Silver)
$ 13.95 - Vendido
This 20" Arm is made of steel and can be used with a grip head as a short boom to hold flags, gobos, lights, or other accessories.
Studio-Assets 3" A Clamp
$ 5.95 - Vendido
You'll find hundreds of uses for the 3" A Clamp. The all-metal spring clamp features protective plastic coverings on the handles and clamp tips so they won't scratch nor cut into foam boards.
Studio-Assets 4-1/2" Grip Head with 1-1/8" Receiver and 5/8" Baby Pin
$ 69.95
The 4-1/2" Grip Head mounts to a junior stand and features a 1-1/8" receiver along with a rotating disc that holds accessories with a 5/8" or 3/8" mounting stud. A large ergonomic handle allows users to firmly secure accessories mounted in the rotating disc. The grip head comes with a junior to baby pin adapter.
Studio-Assets 40" Arm for Grip Head (Black)
$ 29.95 - Vendido
This 40" Arm is made of steel and can be used with a grip head as a short boom to hold flags, gobos, lights, or other accessories.
Studio-Assets 40" Arm for Grip Head (Silver)
$ 39.95 - Vendido
This 40" Arm is made of steel and can be used with a grip head as a short boom to hold flags, gobos, lights, or other accessories.
Studio-Assets Articulating Baby Plate
$ 33.95 - Vendido
Articulating Baby Plate
The articulating baby plate has a swiveling 5/8" baby pin mounted to a heavy duty steel plate. The plate has eight mounting holes for use with screws or nails (not included). Features: perfect for mounting to a wall or apple box; standard 5/8" male stud w/ articulating ball joint; pre-drilled holes for mounting via screws or nails; ergonomic lock knob.
Highlights
Perfect for Mounting to a Wall or Apple Box
Made from Strong Aluminum Alloy
Standard 5/8" Male Stud w/ Articulating Ball Joint
Pre-drilled Holes for Mounting via Screws or Nails
Ergonomic Lock Knob
Package Contents
(1x) Articulating Baby Plate
Outside Dimensions No
Inside Dimensions No
Product Weight (lb) 1.5 lb (0.7 kg)
Material Steel
Manufacturer Studio Assets
Studio-Assets Baby to Junior Pin Adapter
$ 15.95 - Vendido
Machined from solid steel, this adapter will convert any junior receptor to a 5/8" baby pin.
Studio-Assets Center Jaw Vise Grip with 3" Mouth
$ 44.95
Studio-Assets Center Jaw Vise Grip with 3" Mouth
Studio-Assets SKU: SA1684 | Helix SKU: SA1684
Overview
This Center Jaw Vise Grip can clamp onto poles or flat surfaces up to 3 inches thick. At one end of the clamp is a 5/8" pin to mount lights or other studio equipment to the vise grip. Because the vise mouth is at the center, the light will always be the same distance from the clamp regardless of how thick the surface the vise grip is attached to.
Product Weight: 1 lb (0.5 kg)
Material: Steel
Manufacturer: Studio-Assets
Package Contents:
(1x) Center Jaw Vise Grip - 3"
