$ 99.95
Mfr SKU: 1802 | Helix SKU: PR18023
The ProMaster Dovetail Macro Sliding Rail fits ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products. The base of the rail attaches to a dovetail tripod head and can be slid back and forth for best positioning.
Two dovetail clamps are connected to the base rail. The lower clamp slides along the rail to adjust the position of your camera and lens. The upper clamp acts as a quick release receiver for your camera to quickly connect to the system. The upper clamp can be mounted in one of four positions, allowing your camera or lens to be mounted in a front-to-back or side-to-side motion.
Multiple scales are etched into the Macro Sliding Rail to aid in repeatable setups.
This kit also includes a ProMaster 70mm Quick Release Plate (1795) which incorporate two removable safety bolts to prevent it from accidentally sliding out of the clamp.
This system is excellent for macro photography in which small movements to the camera's distance relative to the subject can be used to change focus, composition, and reproduction ratio.
$ 44.95
Mfr SKU: 1774 | Helix SKU: PR17743
ProMaster’s Nodal Sliders are compatible with ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products.
A Nodal Slider allows a lens to slide backward and forward on a tripod head, so that the lens’ nodal point (sometimes called the “no-parallax point”) can be perfectly centered over the head. Centering the nodal point means you can rotate the camera and lens on the head without an unnatural arc in the panning movement. This helps photographers create perfectly stitched panoramics, but this movement can also be very helpful in video work.
A Nodal Slider can also be used to change the mounting direction of a camera by 90 degrees. Some tripod heads, like most gimbal heads, only allow front-to-back mounting of the QR plate. When using an L-Bracket or a QR plate that’s mounted in a side-to-side direction, a Nodal Slider will allow you to attach the camera to the gimbal without adjusting the plate or L-Bracket.
$ 54.95 - Vendido
Mfr SKU: 1781 | Helix SKU: PR17811
ProMaster’s Nodal Sliders are compatible with ProMaster tripods, heads, and gimbals that use the Dovetail Mounting System, as well as other Arca-type products.
A Nodal Slider allows a lens to slide backward and forward on a tripod head, so that the lens’ nodal point (sometimes called the “no-parallax point”) can be perfectly centered over the head. Centering the nodal point means you can rotate the camera and lens on the head without an unnatural arc in the panning movement. This helps photographers create perfectly stitched panoramics, but this movement can also be very helpful in video work.
A Nodal Slider can also be used to change the mounting direction of a camera by 90 degrees. Some tripod heads, like most gimbal heads, only allow front-to-back mounting of the QR plate. When using an L-Bracket or a QR plate that’s mounted in a side-to-side direction, a Nodal Slider will allow you to attach the camera to the gimbal without adjusting the plate or L-Bracket.
Dimensions: 169 mm long x 38 mm wide
Weight: 4 11/16 oz / 133 g
$ 800.00
Rhino SKU: SKU253 | Helix SKU: RHSKU253
This is the perfect bundle for minimalist filmmaker. No batteries or electronics to rely on. Just simple, smooth, cinematic filming.
Features
Includes
$ 250.00
Rhino SKU: SKU209 | Helix SKU:RHSKU209
Overview
Interchangeable rails are the heart of the Rhino System. They allow you to completely change the weight, length, and load capacity of your slider setup without having to buy a completely new setup.
The Carbon 24” Rails are the most versatile of the four options. They are short, light, and super rigid making them great for most everyday shoots.
Weight: 1lb
Load Capacity: 15lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around.
Features
Includes
$ 450.00
Interchangeable rails are the heart of the Rhino System. They allow you to completely change the weight, length, and load capacity of your slider setup without having to buy a completely new setup.
The Carbon 42” Rails are perfect for time-lapse shots and longer interview setups. Thanks to the new dual Tripod Quick Mount plates they are 5x more torsionally rigid than our previous 42” rails. This makes them much for versatile and less prone to twist when filming with heavy setups.
Weight: 1lb 12oz
Load Capacity: 10lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around.
Features
In the box
$ 100.00
Rhino SKU: SKU094 | Helix SKU: RHSKU094
PRODUCT DESCRIPTION:
The Slider Carrying Case is a padded soft shell case that is designed to carry your complete Rhino Slider setup when you’re filming locally. It allows you to store your Rhino Slider with Arc II, Focus, and Motor attached so you don’t have to take down your kit everytime you film at a new location. Setup is as simple as mounting to a tripod using the new Tripod Quick Mount System and powering your gear on.
Note: This version is slightly longer than the previous carrying case to allow for the longer motor to fit assembled.
Fits:
Features
In the box
$ 150.00 - Vendido
Rhino SKU: SKU095 | Helix SKU: RHSKU095
PRODUCT DESCRIPTION:
The Slider Carrying Case is a padded soft shell case that is designed to carry your complete Rhino Slider setup when you’re filming locally. It allows you to store your Rhino Slider with Arc II, Focus, and Motor attached so you don’t have to take down your kit everytime you film at a new location. Setup is as simple as mounting to a tripod using the new Tripod Quick Mount System and powering your gear on.
Note: This version is slightly longer than the previous carrying case to allow for the longer motor to fit assembled.
Fits
Features
In the box
$ 2,350.00 - Vendido
This bundle has everything you need to motorized your slider and start getting incredible 3-axis movement.
Make sure to add Rhino Focus to your bundle to keyframe your focus for even more dynamic shots.
Features
In the box
$ 80.00 - Vendido
Rhino SKU: ROV005 | Helix SKU: RHROV005
The ROV Everyday Backpack is custom designed to fit your ROV Everyday Slider. It allows you to take ROV everywhere your camera does to capture beautiful cinematic slider shots.
Features
In the box
$ 300.00
Achieve vertical slides with up to a 10lb payload with the new High Torque Motor. It attaches onto the end plate of any Rhino Slider (Compatible with both EVO and the new version) in a few seconds. Connect it to Rhino Arc II with the included RJ45 cable and start automating your camera movement.
Features
In the box
$ 550.00 - Vendido
Interchangeable rails are the heart of the Rhino System. They allow you to completely change the weight, length, and load capacity of your slider setup without having to buy a completely new setup.
The Pro 42” Rails are perfect for interview setups running heavier cameras. Thanks to the new dual Tripod Quick Mount plates they are 5x more torsionally rigid than our previous 42” rails. This makes them much for versatile and less prone to twist when filming with heavy setups.
Weight: 7lbs 2oz
Load Capacity: 30lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around.
Features
In the box
$ 600.00
Rhino SKU: SKU201 | Helix SKU: RHSKU201
Rhino Slider Carbon 24” is the ultimate all-round camera slider. Lightweight yet extremely versatile, it will fit most filmmaker’s needs.
Weight: 4lbs
Load Capacity: 15lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around.
Built around ultra-rigid carbon fiber rails and a precision machined aluminum chassis, it’s the essential building block for your motion control system. Outfit it with either Rhino Flywheel for a quick and smooth setup or Rhino Arc II & Rhino Motor for a complete 3-axis motion control system.
Features
In the box
$ 400.00 - Vendido
Rhino SKU: ROV003 | Helix SKU: RHROV003
PRODUCT DESCRIPTIONS:
$ 450.00 - Vendido
Rhino SKU: ROV004 | Helix SKU: RHROV004
PRODUCT DESCRIPTIONS
$ 5.00 - Vendido
Rhino SKU: SKU262 | Helix SKU: RHSKU262
This is the belt for a 24” Rhino Slider. Buy this if you’re looking for a replacement if yours got lost.
In the box
$ 7.50 - Vendido
Rhino SKU: SKU263 | Helix SKU: RHSKU263
This is the belt for a 42” Rhino Slider. Buy this if you’re looking for a replacement if yours got lost.
In the box
$ 800.00
Rhino SKU: SKU202 | Helix SKU:RHSKU202
Rhino Slider Carbon 42” is the ultimate time-lapse camera slider. The long yet light rails let you capture more movement for capturing incredible time-lapses.
Specs
Weight: 4lbs 12oz
Load Capacity: 10lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around. The 42” version has 2 extra plates that make mounting to two tripods infinitely easier increase the torsional rigidity by 5x.
Built around ultra-rigid carbon fiber rails and a precision machined aluminum chassis, it’s the essential building block for your motion control system. Outfit it with either Rhino Flywheel for a quick and smooth setup or Rhino Arc II & Rhino Motor for a complete 3-axis motion control system.
Features
Includes
$ 210.00
Rhino SKU: SKU236 | Helix SKU: RHSKU236
$ 30.00
Rhino SKU: SKU238 | Helix SKU: RHSKU238
This is the Left Leg for a Rhino Slider. Buy this if you’re looking for a replacement or if you want to build out a slider from your spare rails.
In the box
$ 900.00
Rhino SKU: SKU204 | Helix SKU:RHSKU204
Rhino Slider Pro 42” is the go to slider for professional filmmakers. The long, heavy duty rails let you capture more movement for more dynamic interview shots.
Specs
Weight: 11lbs 2oz
Load Capacity: 30lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around. The 42” version has 2 extra plates that make mounting to two tripods infinitely easier and increase the torsional rigidity by 5x.
Built around ultra-rigid carbon fiber rails and a precision machined aluminum chassis, it’s the essential building block for your motion control system. Outfit it with either Rhino Flywheel for a quick and smooth setup or Rhino Arc II & Rhino Motor for a complete 3-axis motion control system.
Features
Includes
$ 30.00
Rhino SKU: SKU237 | Helix SKU: RHSKU237
This is the Right Leg for a Rhino Slider. Buy this if you’re looking for a replacement or if you want to build out a slider from your spare rails.
In the box
$ 350.00
Rhino SKU: SKU235 | Helix SKU: RHSKU235
This kit allows you to turn your spare rails into a complete Rhino Slider. If you have an Ultimate Slider Bundle or just an extra set of rails, use this kit to streamline your workflow if you don’t want to swap out rails every time your needs change.
Note: If you don’t have a spare belt with your rails you’ll need to buy one for this kit to be motorized.
In the box
$ 2,650.00
Rhino SKU: SKU251 | Helix SKU: RHSKU251
Overview
This bundle has everything you need to start time-lapsing like a pro. The ultralight 42” Carbon rails make packing your gear in much easier and the included High Torque motor lets you get incredible vertical shots.
Make sure to add Rhino Focus to your bundle to keyframe your focus for even more dynamic time-lapses.
Features
Includes
$ 3,650.00
Rhino SKU: SKU250 | Helix SKU: RHSKU250
Overview
The Ultimate Slider Bundle equips you with a complete 4-axis slider setup that can capture anything from a dynamic interview with a 15lb cinema camera to a vertical day to night time-lapse with a mirrorless setup.
Our goal with this bundle was to put everything you’d ever need for a slider setup in a hard shell case that you can travel with and keep your gear organized for whatever shoot comes your way.
Features
In the box
$ 3,550.00
Rhino SKU: SKU255 | Helix SKU: RHSKU255
The Ultimate Slider Bundle equips you with a complete 4-axis slider setup that can capture anything from a dynamic interview with a 15lb cinema camera to a vertical day to night time-lapse with a mirrorless setup.
Rhino Slider Pro 42”
Rhino Arc II
Rhino Focus
Rhino Motor - High Torque
Rhino Motor - High Speed
Carbon 24” Rails
Slider Soft Shell Case
International charger
Mounting tool and bottle opener