Effective Sensor Size
13.056mm x 7.344mm
AZDEN EX503 Omni-Directional Lavaliere Microphones #EX-503
$ 21.38
AZDEN EX503 Omni-Directional Lavaliere Microphones #EX-503
$ 21.38
Good Sound ; Excellent Sensitivity & Feedback Rejection ; Included In All Vhf Body Packs ; Omni-directional Microphone
Features
- Handcrafted in Japan
- Omni-Directional Electret Condenser
- Frequency Response: 30-18,000 Hz
- Included lapel clip
- Mono, right-angle mini-plug connector
- Detachable windscreen
- Compatible with 15BT, 35BT and PRO Series Transmitters
Discreet and lightweight, with included lapel clip and windscreen. Omni-directional element sounds good clipped anywhere near a speaker’s voice.
Specifications
- Mic Type: Electret Condenser
- Frequency Response: 30-18,000 Hz
- Directionality: Omni-Directional
- Sensitivity: -44dB at 1kHz (0dB=1V/Pa)
- Impedance: 2.2kΩ (at 1kHz)
- Power Requirement: Plug-in power DC 1-10V
- Weight: Approx 0.35 oz.
- Connector: TS (Tip Sleeve) right angle 3.5mm mini-plug with 1.3m cable. Detachable windscreen
Azden EX503L Omni Lavalier Microphone with Lock-Down Mini for 15BT, 35BT and 32BT Transmitters
$ 29.95
Azden EX503L Omni Lavalier Microphone with Lock-Down Mini for 15BT, 35BT and 32BT Transmitters
$ 29.95
Azden EX503L Omni lavalier Microphone with lock-down mini for 15BT, 35BT and 32BT Transmitters
AZDEN EX505U Uni-Directional Lavaliere Microphone #EX-505U
$ 34.49
AZDEN EX505U Uni-Directional Lavaliere Microphone #EX-505U
$ 34.49
AZDEN EX505U Uni-Directional Lavaliere Microphone
- Mic Type: Electret Condenser
- Frequency Response: 30-18,000Hz
- Directionality: Uni-directional
- Sensitivity: -49dB at 1kHz (0dB=1V/Pa)
- Impedance: 2.2kΩ (at 1kHz)
- Power Requirement: Plug-in power DC 1-10V
- Weight: Approx. 0.35 oz.
- Connector: TS (Tip Sleeve) right angle 3.5mm mini-plug with 1.3m cable
- Detachable windscreen
AZDEN WL/T-PRO Pro Series Wireless Lavaliere Microphone and Transmitter #WL/T-PRO
$ 83.89
AZDEN WL/T-PRO Pro Series Wireless Lavaliere Microphone and Transmitter #WL/T-PRO
$ 83.89
This Azden microphone is a good choice for indulging you with realistic audio tracks time and time again. It's equal parts comfortable and pro-grade. This Azden microphone is intended for many different uses, which means you are able to use it for speeches, sermons, and ceremonies. Weighing in at 3.4 ounces, this condenser microphone is very light, enabling you to quickly hold it for long periods of time at concerts or recording sessions. The Azden WLT-PRO is extremely sensitive, enabling you to catch all kinds of sounds from the subtle to the loud. Since this Azden microphone includes an omnidirectional pattern, you can pick up your subjects equally well from any direction around the mic. The expanded 50 Hz to 18 kHz frequency response of this condenser microphone helps you to easily catch ultra-low bass notes and crystalline treble tones. Plus, the Azden WLT-PRO is wireless, featuring a 76.2 meter transmit range, which means you are able to benefit from tangle-free performances.
- TRANSMISSION FREQ: F1: 169.445MHz; F2: 170.245MHz
- ANTENNA: Internal Antenna
- MIC UNIT: Omni-Directional Electret -Condensor
- BATTERY: 9V x 1 (not included)
- POWER CONSUMPTION: 30mA
- BATTERY LIFE: 8 to 10 Hours
- DIMENSIONS: 86 x 60 x 21.5 (mm)
- WEIGHT (W/ BATTERY): 98g (3.5oz)
Azden WMS-PRO Wireless Microphone System
$ 158.95
Azden WMS-PRO Wireless Microphone System
$ 158.95
The "all-time" best selling wireless microphone for videography. This versatile system consists of the WM-PRO belt-pack transmitter 2 plug-in electret condenser microphones, a lavalier (EX-503) and handheld (EX-413) and the WR-PRO receiver which comes with both shoe-mount and hook and loop fastener. All receivers and transmitters in the "PRO" Series are on the same 2 frequencies (169.445MHz and 170.245MHz).
Blackmagic Micro Studio Camera 4K 2
$ 1,295.00 - Vendido
Blackmagic Micro Studio Camera 4K 2
$ 1,295.00 - Vendido
Blackmagic Micro Studio Camera 4K 2
Blackmagic SKU: BMD-CINSTUDMFT/UHD/MR | Helix SKU: BMDCINSTUDMFTUHDMR
Overview
The Blackmagic Micro Studio Camera 4K is an incredibly tiny Ultra HD resolution camera that can be used in HD and Ultra HD video formats that can be fully controlled from the switcher via the SDI control protocol. Blackmagic Micro Studio Camera 4K includes 6G-SDI connections, built in color corrector, talkback, tally indicator, PTZ control output, built in microphones, backup battery, an adaptable MFT lens mount and B4 lens control output.
Specifications
Camera Features
Shooting Resolutions
3840 x 2160,
1920 x 1080, 1280 x 720
Lens Mount
Active MFT Mount.
Lens Control
Iris, focus,
zoom on supported lenses.
Focus
Remote focus control via expansion
connector or Blackmagic SDI Control
Protocol when using compatible lenses.
Dynamic Range
11 Stops.
Mounting Options
1 x 1/4 inch (top),
3 x 1/4 inch (bottom).
Connections
Total Video Inputs
1 x SDI
Total Video Outputs
1 x SDI, 1 x HDMI Monitoring.
SDI Rates
1.5G, 3G, 6G
Optical SDI
None
SDI Audio Outputs
2 channel embedded
audio support in SDI stream.
HDMI Video Outputs
1 x HDMI Type A output.
HDMI output is always HD, up to 1080p60.
HDMI Audio Outputs
2 channels 48 kHz and 24-bit.
Expansion Port
DB-HD15 serial connector provides support for:
Power input
LANC input
1 x S.Bus input
PTZ output
B4 lens control output
Reference Input
Analog Audio Input
1 x 3.5mm jack, mic or line level.
Analog Audio Output
1 x 3.5mm headphone jack, supports iPhone microphone for talkback.
Reference Input
Tri-Sync or Black Burst on expansion connector.
Screen Dimensions
None
Remote Control
Remote control over SDI via Blackmagic SDI Control Protocol or via expansion port using LANC or S.Bus.
Computer Interface
USB Mini-B port for software updates and configuration.
Audio
Microphone
Integrated stereo microphone.
Built in Speaker
None
Standards
SD Video Standards
None
HD Video Standards
720p50, 720p59.94, 720p60 1080p23.98,
1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94,
1080p60
1080i50, 1080i59.94 and 1080i60
Ultra HD Video Standards
2160p23.98, 2160p24,
2160p25, 2160p29.97 and 2160p30
SDI Compliance
SMPTE 292M, SMPTE 424M, SMPTE 2081-1
SDI Audio Sampling
Television standard sample rate of 48kHz and 24-bit.
Media
Media
None
Media Format
None
Supported Codecs
Codecs
None
Control
Controls
5 control buttons including Set, Up,
Down, Menu, and Power.
External Control
Blackmagic SDI Control Protocol. Expansion connector has LANC, S.Bus and PWM for lens and other settings control.
Color Corrector
Color Corrector
DaVinci YRGB.
Talkback and Tally
Live Tally Indicator
1 x for talent.
Talkback
SDI Channels 15 and 16.
Software
Software Included
Blackmagic Camera Setup.
Operating Systems
Mac 10.12 Sierra,
Mac 10.13 High Sierra or later.
Windows 8.1 or Windows 10.
Power Requirements
Power Supply
1 x External 12V power supply. LP-E6 Lithium-Ion battery included.
Battery Life
Approximately 1 hour 10 minutes.
Physical Specifications
Environmental Specifications
Operating Temperature
0° to 40° C (32° to 104° F)
Storage Temperature
-20° to 45° C (-4° to 113° F)
Relative Humidity
0% to 90% non-condensing
What's Included
Blackmagic Micro Studio Camera 4K
Expansion cable
LP-E6 battery
Turret dust cap
12V AC Adapter
SD card with software and manual
Warranty
12 Month Limited Manufacturer's Warranty
MZW400 Wind-muff and XLR Adapter Kit for the MKE400
$ 38.95
MZW400 Wind-muff and XLR Adapter Kit for the MKE400
$ 38.95
The Sennheiser MZW400 kit contains a wind-muff and XLR Adapter for the MKE400 microphone.
Rode Boompole Microphone Boom Arm
$ 149.00 - Vendido
Rode Boompole Microphone Boom Arm
$ 149.00 - Vendido
COMPARISON CHART
View larger
View larger
Rode Boompole Microphone Boom Arm
Designed for the professional, the Rode Boompole is a high grade professional boom pole for location recording. The boom pole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Machine from high grade aluminium.
Features
- Lightweight aluminium construction
- New ultra smooth extension and retraction system
- Easy to use locking mechanism
- Precision balanced
- Extends from 33 inches to 10 feet
- Compatible with NTG1, NTG2, NTG3, NT4, NT5, NT55 and M3 microphones
RODE Boompole Pro, Carbon Fiber Boom Pole (10')
$ 149.00 - Vendido
RODE Boompole Pro, Carbon Fiber Boom Pole (10')
$ 149.00 - Vendido
Rode Boompole Pro, Carbon Fiber Boom Pole (10')
Made from carbon fibre, the RØDE Boompole Pro weighs only 535gm (18oz) and, from a compact 810mm (2‘ 8”), extends to a full 3m (10’). Designed for use with professional shotgun microphones such as the RØDE NTG3 as well as the Blimp windshield system, the Boompole Pro joins RØDE’s popular boom pole range which now consists of five models ranging in size, weight, and construction material. Each of the five pole sections is comprised completely from carbon fibre making it incredible lightweight while maintaining high levels of strength. The sections are easily extendable with one hand thanks to an intuitive twist-lock mechanic. RØDE offers boom pole cable clips as an optional accessory, however the company’s new RØDELink wireless XLR adaptor allows users to record audio from a shotgun microphone on the end of the Boompole Pro without the hassle and possible handling noise of cables.
Boompole Pro Specifications:
| Weight | 535gm |
| Dimensions | 810mmH x 40mmW x 40mmD |
| Warranty | 1 year |
RODE M1 Dynamic Handheld Stage Microphone
$ 99.00 - Vendido
RODE M1 Dynamic Handheld Stage Microphone
$ 99.00 - Vendido
RODE M1 Dynamic Handheld Stage Microphone
Rode SKU: M1 | Helix SKU: RMM1
Overview
M1 Live performance cardioid dynamic microphone with lifetime warranty
- Live dynamic vocal microphone
- High output neodymium capsule
- Cardioid polar pattern
- Balanced, low impedance output
- Ergonomically designed heavy duty all-metal body
- Low handling noise
- Lifetime warranty when you register your microphone
With rock-solid build quality and a high-power neodymium capsule, the RØDE M1 live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a lifetime warranty, following registration of purchase.
The M1's ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being heavy, and handling noise is almost completely eliminated by the microphone's internal design.
Featuring a warm response that is incredibly defined for a dynamic microphone, the M1's smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback.
Renowned as one of the industry's best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.
Specifications
| Acoustic Principle | Dynamic |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 75Hz - 18kHz |
| Output Impedance | 320Ω |
| Sensitivity | -56.0dB re 1 Volt/Pascal (1.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Weight | 360.00gm |
| Dimensions | 171.00mmH x 51.50mmW x 51.50mmD |
| Output |  |
| Warranty | 1 year with free extension to lifetime warranty following registration |
RODE M1-S Dynamic Live Performance Lockable Low-Noise Switch
$ 115.00 - Vendido
RODE M1-S Dynamic Live Performance Lockable Low-Noise Switch
$ 115.00 - Vendido
RODE M1-S Dynamic Live Performance Lockable Low-Noise Switch
Rode SKU: M1-S | Helix SKU: RMM1S
Overview
M1-S Switchable live performance cardioid dynamic microphone. Fully lockable low-noise switch.
- Live dynamic vocal microphone
- High output neodymium capsule
- Cardioid polar pattern
- Lockable on/off switch
- XLR security lock
- Ergonomically designed heavy duty all-metal body
- Low handling noise
- 10 year extended warranty when you register your microphone
With rock-solid build quality and a high-power neodymium capsule, the RØDE M1-S switchable live dynamic microphone is designed to provide the very best performance, night after night. Its durability is backed-up by a ten year warranty, following registration of purchase.
The M1's ergonomically designed all-metal body is engineered for maximum comfort when used as a handheld microphone. It feels robust, solid and perfectly balanced without being heavy, and handling noise is almost completely eliminated by the microphone's internal design.
Featuring a warm response that is incredibly defined for a dynamic microphone, the M1's smooth character and defined clarity offer incredible performance as a live vocal microphone. A tightly controlled cardioid polar pattern minimises spill and feedback.
The addition of an on/off switch adds versatility for artists, engineers and presenters that prefer control while on stage. A flush-mounted lock ensures the microphone cannot be accidentally switched.
For additional security the M1-S features an XLR lock that can be used to fix the microphone to the cable.
Renowned as one of the industry's best live vocal microphones, the M1 is an equally strong performer on guitar amplifiers as well as kick drum, snare drum, toms and percussion.
Specifications
Rode M2 Handheld Condenser Microphone
$ 179.00 - Vendido
Rode M2 Handheld Condenser Microphone
$ 179.00 - Vendido
Rode M2 Handheld Condenser Microphone
Rode SKU: M2 | Helix SKU: RMM2
Overview
The RØDE M2 is a rugged live-performance condenser microphone designed to provide a full frequency response and premium performance on stage. Combining sound quality equal to that of the finest studio microphones, the M2 live performance handheld condenser microphone benefits from RØDE’s extensive experience. With features such as integrated shock mounting to reduce handling noise and a tailored response to reduce feedback, the M2 is a sturdy and versatile addition to your live microphone kit.
Featuring a tailored-for-stage super-cardioid polar pattern and an internally shock mounted 1/2" condenser capsule, the M2 provides a high quality alternative to dynamic microphones for live performance. The addition of an on/off switch adds versatility for artists that prefer greater control over their sound, while a lock ensures that the microphone cannot be accidentally switched.
The RØDE M2 live condenser microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Features
- Live condenser vocal microphone
- Feedback rejecting super-cardioid pick up pattern
- Locking on/off switch
- Heavy duty metal body
- High level of RF rejection
- Low handling noise
- RM1 stand mount and ZP1 zip pouch included
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 35Hz - 20kHz |
| Output Impedance | 50Ω |
| Maximum SPL | 141dBSPL |
| Maximum Output Level | 5.2mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -44.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 23dBA |
| Power Options |
 
|
| Weight | 308.00g |
| Dimensions | 187.00mmH x 47.00mmW x 47.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE M3 Multi-Powered Cardioid Condenser Microphone
$ 149.00 - Vendido
RODE M3 Multi-Powered Cardioid Condenser Microphone
$ 149.00 - Vendido
RODE M3 Multi-Powered Cardioid Condenser Microphone
Rode SKU: M3 | Helix SKU: RMM3
Overview
Studio and location multi-powered cardioid condenser microphone with switchable HPF and PAD.
- Heavy duty metal body
- Internal capsule shock mount
- High level of RF rejection
- On-mic selectable high pass filter @ 80Hz-12dB/Oct (-10 and -20dB PAD)
- Heat-treated high-strength mesh head
- Battery status indicator
- 9V Battery Power and 24 - 48V phantom power
- Includes wind shield, mic clip and zip pouch
- 10 year extended warranty when you register your microphone
The RØDE M3 is a highly versatile end-address condenser microphone, designed to be completely at home in the studio, on stage or on location. It is equally suitable as an instrument microphone for guitars, drums and percussion or even vocals.
Featuring a heavy duty metal body and internally shock mounted 1/2" condenser capsule mounted for end-address, the M3 can be powered either via P48 phantom power, or an internal 9V battery.
A -10dB and -20dB level attenuator (pad), selectable from inside the battery compartment, allows recording of loud sound sources, such as a guitar amplifier or snare drum. A high-pass filter selectable on the microphone power switch introduces a filter at 80Hz to reduce low frequency sounds and handling noise.
The RØDE M3 microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz(selected HPF @80Hz) |
| Output Impedance | 200Ω |
| Maximum SPL | 142dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 9.2mV |
| Sensitivity | -40.0dB re 1 Volt/Pascal (6.30mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 21dB-A |
| Weight | 390.00gm |
|
Dimensions |
225.00mmH x 33.00mmW x 33.00mmD |
| Warranty |
1 year with free extension to 10 years following registration |
RODE M5 Compact 1/2" Condenser Microphone (Matched Pair)
$ 199.00 - Vendido
RODE M5 Compact 1/2" Condenser Microphone (Matched Pair)
$ 199.00 - Vendido
RODE M5 Compact 1/2" Condenser Microphone (Matched Pair)
Rode SKU: M5-MP | Helix SKU: RMM5MP
Overview
Matched pair of compact 1/2" cardioid condenser microphones. Includes 2 x RM5 mic clips and 2 x WS5 windshields
- 1⁄2” capsule with gold-plated membrane
- Cardioid polar pattern
- All metal body
- Ultra-low noise
- State-of-the-art surface mount electronics
- Includes microphone clips and windshields
- 10 year extended warranty when you register your microphone
Designed and made in Australia, the M5 is a compact ½” cardioid condenser microphone with low noise and a full frequency response. A result of many years’ experience building the award-winning NT5 microphone, RØDE has succeeded in making a high-quality ‘pencil’ style permanently polarized condenser that will impress even the most demanding of artists and engineers. Ideal for studio recording and live on stage, the M5 is equally at home on a range of acoustic instruments, choirs, or anywhere you would employ a small diaphragm condenser microphone, either individually or as a stereo array. This matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones. A premium foiled certificate is supplied to verify the authenticity of the pair. The M5 is finished with RØDE’s proprietary ceramic coating which offers a sleek matt black finish, and is supplied with WS5 windshields and RM5 stand mounts.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 13.5mV |
| Sensitivity | -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 19dB-A |
| Power Options |
|
| Weight | 80.00gm |
| Dimensions | 100.00mmH x 20.00mmW x 20.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
Rode Mini Boompole Microphone Boom Arm
$ 129.00 - Vendido
Rode Mini Boompole Microphone Boom Arm
$ 129.00 - Vendido
COMPARISON CHART
View larger
Rode Mini Boompole Microphone Boom Arm
A lightweight, high grade professional boom pole, the Mini Boompole allows you to mount your microphone securely. Plus you can swivel it in a range of directions that will allow you to easily change positions and follow your sound source. The Mini Boompole extends from 0.84m (33 inches) to 2.05m (81 inches).
Features
- Lightweight aluminium construction
- New ultra smooth extension and retraction system
- Easy to use locking mechanism
- Precision balanced
- Compatible microphones : NTG1, NTG2, NTG3, NT4, NT5, NT55, M3
Mini Boompole Specifications:
| Weight | 580.00gm |
| Dimensions | 2100.00mmH x 32.00mmW x 32.00mmD |
| Warranty | 1 year |
Support
RODE NT4 - Cardioid Studio Condenser X/Y Stereo Microphone
$ 529.00 - Vendido
RODE NT4 - Cardioid Studio Condenser X/Y Stereo Microphone
$ 529.00 - Vendido
RODE NT4 - Cardioid Studio Condenser X/Y Stereo Microphone
Rode SKU: NT4 | Helix SKU: RMNT4
Overview
Fixed X/Y stereo 1/2" condenser microphone with 3.5mm minijack and dual XLR connectivity. P48 and 9V battery powered.
- Stereo X/Y condenser microphone
- Dual externally biased 1/2” capsules with gold sputtered diaphragm
- Capsules closely matched with full frequency response
- Dual power operation
- Custom stereo cables included - 5 pin stereo XLR, Minijack (Via included cable) and dual 3-pin XLR (via included cable)
- Custom twin head windshield (WS4) included
- Includes custom twin head windshield WS4, RC4 case and 5-pin Minijack and XLR stereo cables
- Surface mount circuitry
- 10 year extended warranty when you register your microphone
The RØDE NT4 stereo microphone offers a perfect X/Y stereo array without the need for matched pair microphones, complex stereo bars and equipment. Simply place the microphone and capture a realistic stereo field using a single microphone.
Combining an acoustically matched pair of 1/2” cardioid condenser capsules fixed in a perfect 90 degree near-coincident alignment, the NT4 instantly creates a faithful stereo array that is ideal for drum overheads, percussion, choir vocals, environmental recording and sound design in a studio or in the field.
The NT4's versatility is further extended by its ability to be powered by a 9V battery, in addition to 48V phantom power. Both stereo XLR and 3.5mm minijack cables are supplied to ensure the NT4 is ready to record to mixing console, portable recorder or camera.
The RØDE NT4 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |
|
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 13.9mV |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 16dB-A |
| Power Options |
9V battery powered
|
| Weight | 480.00gm |
| Dimensions | 231.00mmH x 61.00mmW x 33.00mmD |
| Output |
|
| Warranty | 1 year with free extension to 10 years following registration |
RODE NT5 Cardioid Studio Condenser Microphones (Matched Pair)
$ 429.00 - Vendido
RODE NT5 Cardioid Studio Condenser Microphones (Matched Pair)
$ 429.00 - Vendido
RODE NT5 Cardioid Studio Condenser Microphones (Matched Pair)
Rode SKU: NT5 Matched Pair | Helix SKU: RMNT5MatchedPair
Overview
Pair of acoustically matched NT5 1/2" cardioid condenser microphones.
The Rode NT5 is a matched pair of small diaphragm microphones featuring full frequency response and low-noise output circuitry. Designed for general instrument recording and sound reinforcement.
The cardioid polar pattern effectively minimizes audio at the off-axis sections, reducing noise caused by, leakage, monitors, additional instruments etc. The NT5 offers a frequency response of 20 Hz to 20 kHz allowing the microphones to be used in a wide variety of applications such as drum over-head miking, stereo capturing of instruments, vocal capturing etc. The NT5 is powered via +24V or +48V phantom power. The package includes dual windscreens and stand mounts in a durable road case.
Specifications
| Operating Principle | Pressure Gradient |
| Transducer | Condenser |
| Diaphragm | 0.5" (12.70 mm) |
| Polar Pattern | Cardioid |
| Frequency Range | 20 Hz to 20 kHz |
| Signal to Noise Ratio | 78 dB |
| Equivalent Noise Level | 16 dB A-Weighted |
| Maximum SPL | 143 dB SPL 1% |
| Impedance | 100 ohms |
| Sensitivity | -38 dB, re: 1 V/Pa |
| Power Requirements | 24 V, 48 V |
| Output Connectors | 3-Pin XLR |
| Dynamic Range | 128 dB |
| Length | 4.65" (118 mm) |
| Diameter | 0.79" (20 mm) |
| Weight | 0.22 lb (100 g) |
Packaging Info:
Package Weight 3.5 lb
Box Dimensions (LxWxH) 15.6 x 12.3 x 4.4"
RODE NT5 Cardioid Studio Condenser Microphones (Single Microphone)
$ 219.00 - Vendido
RODE NT5 Cardioid Studio Condenser Microphones (Single Microphone)
$ 219.00 - Vendido
RODE NT5 Cardioid Studio Condenser Microphones (Single Microphone)
Rode SKU: NT5 | Helix SKU: RMNT5
Overview
Compact 1/2" cardioid condenser microphone.
- Externally biased condenser
- Gold sputtered 1/2” capsule
- Heavy-duty satin-nickel plated body
- Dual power operation
- Surface mount circuitry
- Low noise
- Full frequency response
- Available as Certified Match Pair
- 10 year extended warranty when you register your microphone
The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.
Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.
Expanding the NT5's versatility, an interchangeable omnidirectional capsule (NT45-O) is available.
Finished in durable satin nickel, the NT5 available as a single microphone or as an acoustically matched pair.
The NT5 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 100Ω |
| Maximum SPL | 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 13.9mV |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 16dB-A |
| Power Options |
+24V phantom power required from mixer or interface
|
| Weight | 101.00gm |
| Dimensions | 118.00mmH x 20.00mmW x 20.00mmD |
| Output | |
| Warranty |
1 year with free extension to 10 years following registration |
RODE NT55 Compact Condenser Microphone (Matched Pair)
$ 829.00 - Vendido
RODE NT55 Compact Condenser Microphone (Matched Pair)
$ 829.00 - Vendido
RODE NT55 Compact Condenser Microphone (Matched Pair)
Rode SKU: NT55 Matched Pair | Helix SKU: RMNT55MatchedPair
Overview
Pair of acoustically matched NT55 1/2" cardioid condenser microphones.
The Rode NT55 is a matched pair of compact condenser microphones designed to accurately reproduce vocals and general instruments in recording and sound reinforcement applications. The NT55 features a 3-position pad switch for added headroom while capturing loud, peaking audio signal. A 3-position low-cut filter switch eliminates low frequency noise. The NT55 is a great choice for vocals, guitar, drums, cabinets and more. The NT55 includes interchangeable omnidirectional and cardioid capsules for even further flexibility.
Interchangeable Capsules
Omnidirectional and cardioid capsules are included for added flexibility.
3-Position Pad Switch
0, -10 and -20 dB pad switch enhances headroom and minimizes distortion.
3-Position Low Frequency Roll Off
Flat, 75 Hz and 150 Hz roll-off filter switch minimizes low frequency noise.
Specifications
| Operating Principle | Pressure Gradient |
| Transducer | Condenser |
| Diaphragm | 0.5" (12.70 mm) |
| Polar Pattern | Cardioid, Omnidirectional |
| Frequency Range | 20 Hz to 20 kHz |
| Signal to Noise Ratio | 79 dB |
| Equivalent Noise Level | 15 dB A-Weighted |
| Maximum SPL | 136 dB SPL 1% |
| Impedance | 100 ohms |
| Sensitivity | -38 dB, re: 1 V/Pa |
| Power Requirements | 48 V |
| Output Connectors | 3-Pin XLR |
| Dynamic Range | 121 dB |
| Length | 5.71" (145 mm) |
| Diameter | 0.79" (20 mm) |
| Weight | 0.22 lb (100 g) |
Packaging Info
Package Weight 3.5 lb
Box Dimensions (LxWxH) 14.5 x 12.0 x 4.5"
RODE NT55 Compact Condenser Microphone (Single Microphone)
$ 369.00 - Vendido
RODE NT55 Compact Condenser Microphone (Single Microphone)
$ 369.00 - Vendido
RODE NT55 Compact Condenser Microphone (Single Microphone)
Rode SKU: NT55 | Helix SKU: RMNT55
Overview
Compact 1/2" cardioid and omni condenser microphone.
- Externally biased condenser
- Cardioid or Omni polar pattern using included interchangable capsules
- Gold sputtered 1/2” capsule
- Three position PAD - 0dB, -10dB and -20dB
- Three position High-Pass Filter - flat, 75Hz and 150Hz
- Surface mount circuitry
- Low noise
- Available as Certified Matched Pair
- 10 year extended warranty when you register your microphone
Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.
Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.
Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair.
The NT55 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |
|
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 100Ω |
| Maximum SPL | 136dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 8.0mV |
| Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 15dB-A |
| Power Options | |
| Weight | 110.00gm |
| Dimensions | 145.00mmH x 20.00mmW x 20.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE NT6 Compact Condenser Microphone
$ 429.00 - Vendido
RODE NT6 Compact Condenser Microphone
$ 429.00 - Vendido
RODE NT6 Compact Condenser Microphone
Rode SKU: NT6 | Helix SKU: RMNT6
Overview
Compact 1/2" condenser microphone with 3m (10') Kevlar® reinforced cable to detachable capsule head. Also features HPF and PAD.
- 1/2” condenser capsule with remote preamp
- Gold sputtered externally biased condenser
- Two position PAD - 0dB and -10dB
- Two position High Pass Filter - flat and 80Hz
- Includes two-axis swivel mount, 3m Kevlar® fibre reinforced cable, windshield and zip pouch
- Heavy duty satin-nickel plated body
- Low noise and full frequency response
- Designed and manufactured in Australia
- 10 year extended warranty when you register your microphone
The RØDE NT6 is an extremely compact 1/2" cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required.
Although clearly relevant to instrument miking, the NT6 is extremely well suited to any situation where an unobtrusive but powerful microphone is required such as location recording.
The microphone is split into two modular components, joined by via a custom 3m (10') shielded, Kevlar® reinforced cable.
Featuring a gold-sputtered, true-condenser capsule, the NT6 capsule head measures 45mm (1.8”) in length and weighs only 42gm (1.5oz). The included all-metal, multi-position mounting ring provides 180 degrees of vertical rotation.
The NT6 preamp-body incorporates both a high-pass filter and pad setting. The high-pass filter can be introduced to cut vibration, rumble and undesired sounds sources under 80Hz, while the PAD offers a -10dB level attenuation, useful when recording louder sound sources.
The NT6's small form factor make it an ideal small diaphragm cardioid microphone for use in the Mid-Side (M/S) stereo array, in combination with a figure-8 large diaphragm microphone such as the NT2-A, NT2000 or K2.
The NT6 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 135dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 6.0mV |
| Sensitivity | -37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 19dB-A |
| Power Options |
|
| Weight | 386.00gm |
| Dimensions | 189.00mmH x 64.00mmW x 20.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE NTR Active Ribbon Microphone
$ 799.00 - Vendido
RODE NTR Active Ribbon Microphone
$ 799.00 - Vendido
RODE NTR Active Ribbon Microphone
Rode SKU: NTR | Helix SKU: RMNTR
Overview
NTR Active Ribbon Microphone
- Highly sensitive 1.8 micron ribbon element
- Bi-Directional Polar Pattern
- Internal Shock Mounting System
- Custom designed and manufactured transformer
- Heavy-duty matte black finish
- Ribbon-securing travel screw supplied
- Designed and manufactured in Australia
- One free ribbon replacement during warranty period
- 10 year extended warranty when you register your microphone
At first glance of the NTR you’re aware that it’s very special and unique – an intricate blend of art and science.
Designed to hang in the world’s finest recording studios and performance halls equally as well as home studio spaces, its existence is a labour of love for RØDE. Every element of the NTR, from the transformer to the ribbon element itself, has been designed and created in-house at RØDE’s headquarters in Sydney, Australia. All with the aim of crafting the finest ribbon microphone available.
Sonically, the NTR is capable of reproducing unprecedented high frequency detail and accuracy, addressing common criticisms of other ribbon microphones, while opening up the possible usage scenarios considerably. This allows it to record sound sources that usually require a more sensitive microphone element.
Specifications
| Acoustic Principle | Velocity Transducer |
| Active Electronics | Step-up Transformer and signal balanced preamp stage |
| Polar Pattern |
Figure 8 - picks up from the front and rear and rejects sides
|
| Address Type | Side |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 130dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -30.5dB re 1 Volt/Pascal (30.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 15dB-A |
| Power Options | |
| Weight | 1047gm |
| Dimensions | 216mmH x 65mmW x 65mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE Podcaster USB Broadcast Microphone
$ 229.00
RODE Podcaster USB Broadcast Microphone
$ 229.00
RODE Podcaster USB Broadcast Microphone
Rode SKU: Podcaster | Helix SKU: RMPodcaster
Overview
The RØDE Podcaster is a dynamic, end-address USB microphone that combines broadcast-quality audio with the simplicity of USB connectivity, allowing recording direct to a computer without the need for an additional digital interface.
Including an audiophile quality 18-bit resolution, 48kHz sampling A/D converter, the Podcaster processes all of the analogue-to-digital conversion internally, bypassing the computer's lower quality on-board sound controller altogether.
A headphone output on the microphone body provides zero-latency monitoring, so the user can hear exactly what is being recorded, free of delay or echo.
The Podcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.
It is fully compatible with Windows 7, Windows 8 and Mac OS X computers, as well as several Linux distributions. The microphone is bus powered and features a status LED to indicate operation.
The Podcaster is ideal for podcasting, vodcasting, YouTube videos, voice recognition software, corporate videos and any production application that requires a simple yet professional voice-over microphone. It is also a convenient demo microphone for musicians and songwriters that prefer the convenience of a USB microphone but don't want to compromise sound quality.
It can also be used as an iPad microphone for the Apple iPad (in conjunction with the iPad Camera Connection Kit and a powered USB hub) to provide high quality recording to various iPad audio applications such as Garageband.
The Podcaster includes a sturdy RM2 microphone ring mount. For professional applications the optional PSM1 shock mount and PSA1 boom arm are highly recommended.
The RØDE Podcaster USB microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
- Broadcast Sound Quality
- 28mm dynamic capsule
- 18-bit resolution, 8-48kHz sampling
- Windows and Mac compatible
- Powered by USB bus
- Internal capsule shock mounting
- 3.5mm stereo headphone output with volume control built-in to body
- Ideal for voice recognition software
- 10 year extended warranty when you register your microphone
Specifications
| Acoustic Principle | Dynamic |
| Active Electronics | Analogue signal conditioning + A/D and USB interface |
| Polar Pattern | |
| Resolution | 18-bit |
| Sampling Rate | 8-48kHz |
| Address Type | End |
| Frequency Range | 40Hz - 14kHz |
| Output Impedance | 0Ω |
| Maximum SPL | 115dBSPL |
| Sensitivity | -51.0dB re 1 Volt/Pascal (2.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Power Options |  |
| Weight | 655.00g |
| Dimensions | 215.00mmH x 56.00mmW x 52.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
Rode SM3 Shock Mount For Rode Shotguns and NT5
$ 49.95 - Vendido
Rode SM3 Shock Mount For Rode Shotguns and NT5
$ 49.95 - Vendido
RODE SM3 Shock Mount For Rode Shotguns and NT5
The SM3 is a suspension shock mount with Hot-Shoe adaptor for mounting the RØDE NTG1, NTG2, NTG3, NT3, NT4 & NT5 microphones on video cameras.
This allows you to connect your RØDE Microphone to a number of video cameras on the market while giving your camera maximum isolation from any handling vibrations.
Compatible Microphones
NT3, NT4, NT5, NT55, NTG1, NTG2
RØDE NT2-A Studio Solution Package
$ 399.00 - Vendido
RØDE NT2-A Studio Solution Package
$ 399.00 - Vendido
RØDE NT2-A Studio Solution Package
RØDE SKU: NT2-A | Helix SKU: RMNT2A
Overview
Multi pattern 1" dual condenser microphone, featuring switchable omni, cardioid and figure 8 polar patterns, HPF and PAD.
- Large 1” HF1 gold sputtered capsule
- On body control of polar pattern, HPF and PAD
- Three position variable polar pattern - Omni, Cardioid or Figure 8
- Three position variable High-Pass Filter - Flat, 40Hz or 80Hz
- Three position PAD - 0dB, -5dB or -10dB
- Ultra low noise
- Internal capsule shock mounting
- Includes RØDE SM6 shock mount, pop filter and dust cover
- Designed and manufactured in Australia
- 10 year extended warranty when you register your microphone
The NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large 1" capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.
The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50s and 60s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.
Supplied with the SM6 shock mount, dust cover, microphone cable and DVD hosted by Grammy-nominated engineer and producer John Merchant showing a range of recording techniques specific to the NT2-A.
The RØDE NT2-A microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 1.00" |
| Polar Pattern |
|
| Address Type | Side |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 16.0mV |
| Sensitivity | -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 7dB-A |
| Power Options |
|
| Weight | 860.00gm |
| Dimensions | 209.00mmH x 55.00mmW x 55.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
WM/T-PRO Series VHF Wireless Handheld Microphone / Transmitter (169.445MHz and 170.245MHz)
$ 114.95 - Vendido
WM/T-PRO Series VHF Wireless Handheld Microphone / Transmitter (169.445MHz and 170.245MHz)
$ 114.95 - Vendido
The WM/T-PRO is a handheld microphone with a built-in transmitter. It transmits on the standard “PRO” frequencies (169.445MHz and 170.245MHz) and is compatible with all PRO Series receivers. The WM/T-PRO has a standby switch to mute audio and a rubberized coating to reduce handling noise. Runs on a single “AA” battery for up to 10 hours of continuous use.
- TRANSMISSION FREQUENCY: F1: 169.445MHz; F2: 170.245MHz
- ANTENNA: Internal Antenna
- MIC UNIT: Unidirectional Dynamic
- BATTERY: 1.5V (AA) x 1 (not included)
- POWER CONSUMPTION: 100mA
- RF OUTPUT: 10mW
- IMPEDANCE: 8 k ohms
- BATTERY LIFE: 8 to 10 Hours
- DIMENSIONS: 62mm (Ø) x 211 mm – (2.4″ x 8.3″)
- WEIGHT (including battery): 170g (6.0 oz)
