ProMaster SGM1 Compact Shotgun Microphone
$ 79.95
ProMaster SGM1 Compact Shotgun Microphone
ProMaster SKU: 8069 | Helix SKU: PR8069
Overview
The ProMaster SGM1 Compact Shotgun Microphone concentrates your camera's audio on the subject while reducing distracting, surrounding noise. Your videos will have clearer, more understandable sound.
The SGM1's compact design makes it easy to store in your camera bag. It balances well even on smaller cameras. The aluminum housing and gold contacts are designed for quality and durability to provide years of great sound for all your videos.
Includes:
- 1 SGM1 compact directional shotgun microphone
- 1 Shoe-mount microphone holder for camera-top mounting
- 1 Coiled 3.5 mm to 3.5 mm male audio connection cable
- 2 Foam windscreens
- 1 AA battery
Specifications
- Frequency response: 30-18,000Hz
- Sensitivity: -40dB (0dB=1V/Pa at 1KHz)
- Direction: Unidirectional
- Polar pattern: Cardioid
- Output impedance: 200ohms
- Signal to noise ratio: 76dB (1KHz at 1 Pa)
- Max SPL (sound pressure level): 120dB (at 1KHzs 1% T.H.D.)
- Power: 1.5V AA
- Length of coiled cable: 25 cm, strechable to 50 cm
- Dimensions: 185 mm x 22 mm / 7 3/16" x 7/8" (microphone body only)
- Weight: 75 g / 2 5/8 oz (not including battery, windscreen or cable)
ProMaster SGM2 Mini Directional Microphone
$ 49.95
ProMaster SGM2 Mini Directional Microphone
ProMaster SKU: 7927 | Helix SKU: PR79277
Overview
The ProMaster SGM2 is a compact, directional microphone that focuses on sound where it is pointed. It works with cameras, camcorders, recorders, smartphones, tablets, computers and more.
The SGM2 uses a reliable design which requires no batteries and sports an aluminum housing. Using plug-in-power it provides excellent sound that is superior to a built-in mic. Its shock-mount offers a cold foot and 1/4"-20 threaded port. It is a convenient way to mount the mic to a camera, bracket, light stand, clamp, and more.
Two styles of wind screen (foam and furry) are included to ensure the best audio in a variety of conditions
This kit is stored and protected in a very nice semi-rigid case.
This kit also includes 3 different, coiled audio cables making it highly adaptable to use with a variety of recording devices from cameras to phones and more. Each audio cable in the kit is labeled on each side so you know exactly what the connector is for.
- The 3.5mm TRS cable fits most cameras, camcorders, and recorders.
-The 2.5mm TRS cable fits cameras using a smaller 2.5mm connector, like some Fuji cameras do.
- The 3.5mm TRRS cable works with a variety of smartphones, tablets, and computers.
Key Features:
- Batteries not required
- Connects to a huge variety of cameras and smart devices
- "Hears" sound where you point it
Specifications
- Polar pattern: Cardioid
- Capsule: Electret Condenser
- Diaphram: 49/128" / 9.7 mm
- Sound field: Mono
- Frequency response: 35 Hz - 18 kHz
- Maximum SPL: 130 dB
- Sensitivity: -42.0 dB re 1 Volt/Pascal (7.9 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
- Signal to noise ratio: 76 dB SPL
- Off-axis rejection: > 14 dB at 180 degrees
- Power: Plug-in-power 3 - 10 V
- Output connection: 3.5mm TRS
- Dimensions of mic: 27/32” x 3 7/32” / 21 mm x 82 mm
- Weight of mic: 1 1/8 oz / 32 g
- Dimensions of entire kit, in storage case: 7" x 5 1/4" x 2 3/4" / 17.8 cm x 13.3 cm x 7 cm
- Weight of entire kit, in storage case: 7 1/4 oz / 206 g
Item Includes
- SGM2 mini directional microphone
- Shock-mount
- Foam windscreen
- Furry windscreen
- 3 Audio cables:
- - 2.5mm TRS - 3.5mm TRS
- - 3.5mm TRS - 3.5mm TRS
- - 3.5mm TRS - 3.5mm TRRS
- Storage case
RODE Blimp with Rycote Lyre Suspension System
$ 299.00 - Vendido
RODE Blimp with Rycote Lyre Suspension System
- Greatly reduces handling and wind noise
- Accommodates most shotgun microphones 325mm in length and 19-22mm diameter
- Rycote Lyre suspension system onboard with internal spacing guide
- Lightweight skeleton handle with 3/8” thread mount
- Mogami cable with Neutrik and Switchcraft XLR connectors
- Dead Wombat windshield included
- 10 year warranty (no registration required)
The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length. Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and isolation. Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap. The Blimp’s handle has also been completely redesigned, reducing the product weight significantly, while increasing the ergonomics for handheld use. Housed inside the grip is a heavy-duty Mogami cable which splits via a junction box to a highly-flexible thin cable inside the Blimp, to minimise the transference of vibration to the microphone. With the lightweight design of the handle and suspension system the new Blimp design is over 25% lighter (550gm without microphone or DeadWombat fitted). The Blimp attaches to any standard boompole via 3/8" thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole to reduce weight. The Dead Wombat windshield, caring brush and tail/patch cable are included. The added confidence of a full ten year warranty* ensures that the Blimp is by far the best microphone windshield system available, further evidenced by a 2009 Red Dot Award and Australian International Design Award for outstanding product design. *Excludes normal wear and tear of Dead Wombat furry cover or any misuse, modification or improper storage and transportation of the product.
| Weight | 550gm |
| Dimensions | 285.00mmH x 490.00mmW x 125.00mmD |
| Warranty | 10 year warranty |
RODE DDCGO DeadCat Go Artificial Fur Wind Shield
$ 29.95 - Vendido
RODE DDCGO DeadCat Go Artificial Fur Wind Shield
The DeadCat GO is a furry wind cover for the VideoMic GO, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
RODE NTG1 Condenser Shotgun Microphone
$ 249.00
RODE NTG1 Condenser Shotgun Microphone
Rode SKU: NTG1 | Helix SKU: RMNTG1
Overview
Directional super cardioid condenser shotgun microphone with switchable HPF
- Broadcast sound quality
- Low noise circuitry
- Super-cardioid polar pattern
- Condenser transducer
- Rugged metal construction
- Two step High Pass Filter (Flat/80Hz)
- Low handling noise
- Low weight - 105g (3 oz.)
- Includes mic clip, wind shield and zip case
- Ideal for professional applications within the film, video, television and production industries
- 10 year extended warranty when you register your microphone
The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm/3.7oz) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
The RØDE NTG1 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance convertor with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 50Ω |
| Maximum SPL | 139dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 6.9mV |
| Sensitivity | -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dB-A |
| Power Options |
+24V phantom power required from mixer or interface
|
| Weight | 105.00gm |
| Dimensions | 219.00mmH x 22.00mmW x 22.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 10 years following registration |
RODE NTG3 Precision RF-Biased Shotgun Microphone - Matte Black
$ 699.00
RODE NTG3 Precision RF-Biased Shotgun Microphone - Matte Black
Rode SKU: NTG3B | Helix SKU: RMNTG3B
Overview
Precision broadcast-grade super cardioid shotgun mic. With stands adverse environmental conditions. Matte black finish, RCNTG3 storage cylinder
- Superior broadcast sound quality
- High Sensitivity
- Super-cardioid polar pattern
- Designed to withstand adverse environmental conditions
- 50% less self-noise than the majority of shotgun microphones
- Extremely low handling noise
- High level of immunity to radio frequency interference
- True Condenser (external RF biased)
- Includes durable aluminium storage cylinder for transport, pop filter, mic clip and large zip pouch
- Designed for professional use on film, television, ENG & wherever high resolution broadcast audio is required
- 10 year extended warranty when you register your microphone
The RØDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required.
As RØDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich, warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue.
Machined from solid brass and available in either anti-glare, nickel-plated finish or matte black (NTG3B), the NTG3 is incredibly robust while remaining light weight.
Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time.
A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone's rugged performance credentials.
The RØDE NTG3 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | RF Bias |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 25Ω |
| Maximum SPL | 130dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 8.2mV |
| Sensitivity | -30.0dB re 1 Volt/Pascal (31.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 13dB-A |
| Power Options | |
| Weight | 163.00gm |
| Dimensions | 255.00mmH x 19.00mmW x 19.00mmD |
| Output |
3-pin XLR Output
|
| Warranty | 1 year with free extension to 10 years following registration |
RODE NTG3 Precision RF-Biased Shotgun Microphone - Silver
$ 699.00 - Vendido
RODE NTG3 Precision RF-Biased Shotgun Microphone - Silver
Rode SKU: NTG3 | Helix SKU: RMNTG3
Overview
Precision broadcast-grade super cardioid shotgun mic. Withstands adverse environmental conditions. RCNTG3 storage cylinder
- Superior broadcast sound quality
- High Sensitivity
- Super-cardioid polar pattern
- Designed to withstand adverse environmental conditions
- 50% less self-noise than the majority of shotgun microphones
- Extremely low handling noise
- High level of immunity to radio frequency interference
- True Condenser (external RF biased)
- Includes durable aluminium storage cylinder for transport, pop filter, mic clip and large zip pouch
- Designed for professional use on film, television, ENG & wherever high resolution broadcast audio is required
- 10 year extended warranty when you register your microphone
The RØDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required.
As RØDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich, warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue.
Machined from solid brass and available in either anti-glare, nickel-plated finish or matte black (NTG3B), the NTG3 is incredibly robust while remaining light weight.
Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time.
A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport. Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone's rugged performance credentials.
The RØDE NTG3 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | RF Bias |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 25Ω |
| Maximum SPL | 130dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 8.2mV |
| Sensitivity | -30.0dB re 1 Volt/Pascal (31.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 13dB-A |
| Power Options | |
| Weight | 163.00gm |
| Dimensions | 255.00mmH x 19.00mmW x 19.00mmD |
| Output |
3-pin XLR Output
|
| Warranty | 1 year with free extension to 10 years following registration |
Rode NTG4 Shotgun Microphone with Digital Switches
$ 499.00 - Vendido
Rode NTG4 Shotgun Microphone with Digital Switches
RØDE SKU: NTG4 | Helix SKU: RMNTG4
Overview
- Broadcast sound quality
- Low noise circuitry
- Rugged metal construction
- Convenient digital switching
- High Frequency Boost
- High Pass Filter (Flat/75Hz)
- PAD (-10db)
- 10 year extended warranty when you register your microphone
The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.
Specifications
| Acoustic Principle | Line Gradient |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz(selected HPF @75Hz) |
| Output Impedance | 200Ω |
| Maximum SPL | 135dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 16dB-A |
| Power Options |
+12V phantom power required from mixer or interface
|
| Weight | 126gm |
| Dimensions | 225mmH x 22mmW x 22mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
RODE NTG8 RF-bias Long Shotgun Microphone
$ 999.00 - Vendido
RODE NTG8 RF-bias Long Shotgun Microphone
Rode SKU: NTG8 | Helix SKU: RMNTG8
Overview
Broadcast Quality RF-bias Shotgun Microphone. IncludesSM8 shock mount, WSNTG8 Windscreen and RCNTG8 storage cylinder.
- Superior broadcast sound quality
- High Sensitivity
- Super-cardioid polar pattern
- Highly directional polar response
- Natural sounding audio both on and off-axis
- Designed to withstand adverse environmental conditions
- Extremely low handling noise
- High level of immunity to radio frequency interference
- True Condenser (external RF biased)
- Includes weatherproof aluminium cylinder for transport, SM8 shock mount and wind shield
- 10 year extended warranty when you register your microphone
Based on RØDE's award winning NTG3 shotgun microphone, the NTG8 is a broadcast quality RF-bias shotgun microphone that exhibits increased directionality across a wide frequency response range. This makes the NTG8 the perfect microphone for film, television, sports and outdoor broadcasting, live performance, and any professional distance miking application.
Like the NTG3, the NTG8 features low self-noise, natural sound without colouration both on and off-axis, and RF bias technology to ensure that it is almost completely resistant to high humidity environments which could cause other condenser microphones to fail.
The NTG8 is finished in matte black and supplied with a specially designed shock mount (SM8) that is engineered to provide excellent handling noise isolation, cable management and versatile mounting options for the microphone. A rugged weatherproof aluminium cylinder is also included, providing ultimate protection for the microphone when in transport or storage. The WSNTG8 windshield completes the package, providing light environmental protection.
The RØDE NTG8 long shotgun microphone is designed in Australia and covered by RØDE Microphones' industry leading 10 year warranty.
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | RF Bias |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 40Hz - 20kHz |
| Output Impedance | 25Ω |
| Maximum SPL | 124dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 8.2mV |
| Sensitivity | -20.0dB re 1 Volt/Pascal (97.50mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 8dB-A |
| Power Options | |
| Weight | 345.00gm |
| Dimensions | 559.00mmH x 19.00mmW x 19.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
Rode VideoMic Directional Video Condenser Microphone w/Mount
$ 149.00 - Vendido
The RODE VideoMic Direction Video Condenser Microphone is a professional-grade shotgun microphone. Based on the latest Film industry technology, the VideoMic is designed specifically for use with high quality digital video cameras. The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it's ABS construction. The VideoMic is powered by a standard 9 V battery and offers a low battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble. The VideoMic attaches to any camcorder that has the standard camera-shoe fitting and utilizes a stereo mini jack for audio output. RODE VideoMic Shotgun Microphone Features Broadcast and studio sound quality Rugged reinforced ABS construction two step high-pass filter - flat or 80 Hz integrated shock mount 9 V battery operation condenser transducer low noise circuitry low handling noise includes windscreen integrated camera-shoe mount
RODE VideoMic Pro with Rycote Lyre Suspension Mount
$ 249.00 $ 229.00 - Vendido
RODE VideoMic Pro with Rycote Lyre Suspension Mount
The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.
The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.
The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.
The RØDE VideoMic is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
- Rycote® Lyre® shock mounting onboard
- All-new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6” length)
- Ultra lightweight (85g/3oz)
- 9V battery powered - over 70 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 3.5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8” thread for easy boompole mounting
- 10 year extended warranty when you register your microphone
Rode VideoMicro Compact On-Camera Microphone VideoMicro
$ 59.00 - Vendido
Rode VideoMicro Compact On-Camera Microphone
RODE SKU: VideoMicro | Helix SKU: RMVideoMicro
Overview
- Compact size and lightweight - only 80mm (3’) long and 42gm (1.5oz)
- All-metal microphone body
- No battery required (powered by camera plug-in power - min 3V)
- Rycote® Lyre® shock mount included
- Deluxe furry windshield included
- Designed and manufactured in Australia
- Two year extended warranty when you register your microphone
The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. Its pickup is more forgiving than RØDE’s other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount. Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness. Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RØDE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.
VideoMicro Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.50" |
| Polar Pattern |  |
| Address Type | End |
| Frequency Range | 100Hz - 20kHz |
| Maximum SPL | 140dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -33.0dB re 1 Volt/Pascal (22.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 20dB-A |
| Power Options | Phantom Power Required |
| Weight | 42gm |
| Dimensions | 21mmH x 21mmW x 80mmD |
| Output |  |
| Warranty | 1 year with free extension to 2 years following registration here |
RODE VMGO Video Mic GO Lightweight On-Camera Microphone Super-Cardio
$ 99.00 - Vendido
RODE VMGO Video Mic GO Lightweight On-Camera Microphone Super-Cardio
- High quality directional microphone
- No battery required
- Integrated Rycote® Lyre® shock mounting
- Our lightest mic at only 73g
- Rugged reinforced ABS construction
- Windshield included
- 3.5mm mini-jack output
- Integrated cold-shoe mount with 3/8” thread
- Two year extended warranty when you register your microphone
Clear, directional audio on the GO!
Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.
The integrated Rycote® Lyre® shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.
Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.
The VideoMic GO is designed and made in Australia.
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 100Hz - 16kHz |
| Maximum SPL | 120dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 34dB-A |
| Weight | 73.00gm |
| Dimensions | 79.00mmH x 73.00mmW x 167.00mmD |
| Output | |
| Warranty | 1 year with free extension to 2 years |
RØDE NTG2 Condenser Shotgun Microphone
$ 269.00
RØDE NTG2 Condenser Shotgun Microphone
Rode SKU: NTG2 | Helix SKU: RMNTG2
Overview
The RØDE NTG2 is a new, lightweight condenser shotgun microphone, designed for professional applications within the film, video, television, and production industries. The NTG2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or 48 V phantom power. A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the NTG2 the perfect choice for film, video engineering, and voice-over work. The NTG2 is extremely lightweight making it ideal for mounting directly to video cameras or on boom poles.
The NTG2 comes complete with zip pouch, stand mount, and windshield. The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions.
- Broadcast sound quality
- Low noise circuitry
- 48V phantom power or 1.5V AA battery
- Two step high-pass filter - flat or 80 Hz
- Rugged metal construction
- Low weight - 161 grams (5 ounces)
- Low handling noise
- Supplied with stand mount, zip pouch, and windshield
Specifications
| Acoustic Principle | Line Gradient |
| Active Electronics | JFET impedance convertor with balanced transformer output |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 250Ω |
| Maximum SPL | 131dBSPL |
| Maximum Output Level | 6.9mV (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 18dBA |
| Power Options |
|
| Weight | 161.00g |
| Dimensions | 280.00mmH x 22.00mmW x 22.00mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
What's in the Box
|
NTG2 Multi-Powered Shotgun Microphone |
 |
RM5 Durable Microphone Clip |
 |
ZP2 Padded Zip Pouch (large) |
 |
WSVM Pop Filter/Wind Shield |
RØDE NTG4 Shotgun Microphone with Digital Switches & Rechargable Lithium Battery
$ 399.00 - Vendido
RØDE NTG4 Shotgun Microphone with Digital Switches & Rechargable Lithium Battery
RØDE SKU: NTG4+ | Helix SKU: RMNTG4P
Overview
- Broadcast sound quality
- Low noise circuitry
- Rugged metal construction
- Convenient digital switching
- High Frequency Boost
- High Pass Filter (Flat/75Hz)
- PAD (-10db)
- 10 year extended warranty when you register your microphone
The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.
Specifications
| Acoustic Principle | Line Gradient |
| Capsule | 0.50" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz(selected HPF @75Hz) |
| Output Impedance | 200Ω |
| Maximum SPL | 135dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 16dB-A |
| Power Options |
+12V phantom power required from mixer or interface
|
| Weight | 126gm |
| Dimensions | 225mmH x 22mmW x 22mmD |
| Output | |
| Warranty | 1 year with free extension to 10 years following registration |
Saramonic SR-TM7 15.5" Professional Supercardioid XLR Shotgun Condenser Microphone with Rechargeable Lithium-Ion Battery
$ 339.00 - Vendido
Saramonic SR-TM7 15.5" Professional Supercardioid XLR Shotgun Condenser Microphone with Rechargeable Lithium-Ion Battery
MFR SKU: SR-TM7 | Helix SKU: SRSRTM7
Overview
The Saramonic SR-TM7 is a professional XLR shotgun microphone that delivers clear, broadcast-quality sound to video cameras, audio recorders, and DSLR and mirrorless cameras that have XLR adapters. Its long-shotgun design enables it to excel at capturing sounds in wide shots and in situations where you cannot get close to the sound source.
The TM7 offers several useful features and has a built-in rechargeable battery for power. There are 5 illuminated buttons that are easy to adjust in low-light. The -10 dB PAD button allows you to cleanly capture loud sounds. The +6 dB high frequency boost button enhances sharpness and clarity. There are two low-cut buttons (75 and 150 Hz) that make dialog more intelligible and eliminate distracting deep bass noises, like the low rumble of vehicles and air conditioners.
The built-in lithium battery can power the TM7 for 150 hours. It can also be powered via phantom and the power button changes color to indicate energy source and battery life. A Micro-USB charging port is unobtrusively integrated into the XLR connector, and a charging cable is included. You also get a short XLR cable, a mic clip with a camera shoe mount, and a foam windscreen in the box.
The TM7 features a durable metal construction that will handily withstand the demanding world of video production. The absence of a disposable battery compartment makes the all-metal TM7 more lightweight, and the built-in battery digitally controls the on-board filters and saves your settings when the microphone is turned off. A high-wind furry windscreen that was designed specifically for the TM7 called the TM-WS7 can be used when shooting outdoors in windy conditions (sold separately).
- Professional broadcast-quality 15.5” shotgun microphone that runs on built-in lithium battery or phantom power
- Supercardioid polar pattern excels at capturing sounds in tight shots with extreme directionally and wide shots and in situations where you cannot get close to the sound source
- Low-cut button makes dialog more intelligible and eliminates distracting rumble noises, +6 dB high frequency boost button enhances sharpness and clarity, -10 dB button allows you to cleanly capture loud sounds
- 150 hours of operation time from the built-in lithium-ion battery, power button changes color to indicate energy source and battery life, Micro-USB charging port in the XLR connector
- Illuminated buttons are easy to adjust in low-light working environments
Specifications:
Frequency Response: 20 Hz to 20 kHz
Acoustic Principle: Line gradient
Polar Pattern: Supercardioid
Sensitivity: -30±3dB (0dB=1V/Pa,at 1KHz) 1.5V 2.2kΩ
Output Impedance: 200 ohm
Max Output: 10 dBu (at 1 kHz, 1% THD into 1 kOhm)
Dynamic Range: 120 dB
Max SPL: 145 dB
Signal to Noise Ratio: 80 dB SPL
Filters: High-pass 75 and 150 Hz
Battery: 48V Phantom or internal lithium-ion battery (150 hours)
Output Connector: 3-pin XLR (Balanced)
Dimensions: 15.55 x .9 x .9" (39.5 x 2.3 x 2.3cm)
Weight: 7.7 oz (219g)
Saramonic VMIC Recorder Super-Cardioid Video Microphone with Built-in Audio Recorder
$ 159.00 - Vendido
Saramonic VMIC Recorder Super-Cardioid Video Microphone with Built-in Audio Recorder
MFR SKU: VMIC-REC | Helix SKU: SRVMICREC
Overview
The Saramonic Vmic Recorder is a premium on-camera shotgun microphone with a built-in high-resolution audio recorder that delivers broadcast-quality sound to DSLRs, mirrorless cameras and video cameras and provides many useful features. Specifically designed for DSLR, Mirrorless and Video Cameras that lack a microphone input or users that want to record to an external recorder as well as their camera. There are two outputs on the Vmic Recorder, one for your camera and another for headphones — so you can always listen to your audio while recording or even when your camera lacks a headphone jack. The built-in audio recorder captures rich and detailed sound with resolutions up to 24bit 48kHz, and like all Saramonic products, the Vmic Recorder is incredibly easy to use.
A backlit LCD screen with an intuitive menu system is provided on the rear of the Vmic Recorder, and a push-button joystick lets you quickly do a range of functions like controlling the headphone volume, adjusting the recording level, and turning on the low-cut filter, which makes dialog more intelligible and eliminates distracting rumble sounds. The exterior of the Vmic Recorder is constructed with durable metal and was built to survive the not-so-gentle world of video production. The robust integrated shockmount features a camera shoe mount and a metal 1/4 20 tripod thread for more mounting options.
In addition to impressive sound quality, the Vmic Recorder also efficiently utilizes power. It gets 9 hours of operation time when recording, and 10 hours when used as a shotgun mic and it runs on 2 standard AA batteries. Audio is recorded onto a MicroSDHC card (sold separately), and it’s compatible with up to 32GB capacities. Plus, the Vmic Recorder can be used as an excellent-sounding on-camera shotgun microphone even when you’re not recording. A foam windscreen is included for indoor use, and for outdoor recording in higher winds you can use the fitted VMIC-WS furry windscreen (sold separately).
- Broadcast-quality on-camera shotgun microphone with an integrated high-resolution MicroSDHC audio recorder, built-in headphone jack and removable output cable
- Durable metal construction, robust integrated shockmount with camera shoe mount
- Incredibly easy to use, low-cut filter makes dialog more intelligible and eliminates distracting rumble sounds
- Backlit LCD screen with easy-to-use menu system, camera shoe features a metal 1/4 20 tripod thread, records up to 24-bit 48kHz resolution
- Can be used as an on-camera shotgun microphone even when you’re not recording, runs on 2 standard AA batteries and gets up to 10 hours of operation
Specifications:
Frequency Response:50 Hz to 20 kHz
Type of Microphone: Condenser (Unidirectional)
Polar Pattern: Supercardioid
Maximum SPL: 104 dB
Signal to Noise Ratio: 22 dB, Gain Setting 66 dB
Operating Temperature Range: -17 to 57 Celsius
Output Impedance: 47 Ohms or less
Headphone Output Impedance: 16 Ohms
Sensitivity: -40 dB at 1 kHz
Filter: High-pass 200 Hz
Recording Media: MicroSDHC card slot
Resolution: 16-bit/48kHz wav or 24-bit/48kHz wav
Outputs: 2 x female 1.8” (3.5 mm), 1 for headphones, 1 for camera connection
Battery: 2 x AA (Alkaline or Lithium)
Dimensions: 10.04 x 2.6 x 3.15” (255 x 66 x 80 mm)
Weight: 7.3 oz (207 g)
In The Box:
1 x Vmic Recorder shotgun microphone with built-in audio recorder
1 x short, coiled cable with gold-plated mini-plug connectors
1 x foam windscreen
1 x printed manual
1 x warranty card
Optional Accessories (Sold Separately):
- VMIC-WS Outdoor high-wind furry windscreen
- SR-UC-201 1/8“ (3.5mm) Female TRS microphone adapter cable to 3.5mm male TRRS for smartphones and tablets with a headphone jack
- WM4C-C35 Replacement 1/8“ (3.5mm) male stereo TRS to 3.5mm male stereo TRS output connector cable
- SR-CS350 2-Pack of replacement 1/8“ (3.5mm) male stereo TRS to 3.5mm male stereo TRS output connector cables
- SR-SM-C301 1/8“ (3.5mm) output cable for iOS
- SR-SM-C302 1/8“ (3.5mm) output cable for Android
- LC-C35 Locking 1/8“ (3.5mm) to Lightning output cable for iPhone & iPad
- UTC-C35 Locking 1/8“ (3.5mm) to USB Type-C output cable for smartphones, tablets and Apple computers with USB Type-C
- SR-PMC2 1/8“ (3.5mm) TRS to 1/8“ (3.5mm) TRRS output cable for smartphones and tablets
- SR-GMC2 1/8“ (3.5mm) TRS to select GoPro camera output cable
- USB-C201 Locking 1/8“ (3.5mm) TRS to USB output cable for PC and Mac computers
