Tamron Rear Lens Cap for Canon
$ 5.95 - Épuisé
Tamron Rear Lens Cap for Canon
Tamron Rear Lens Cap for Nikon
$ 5.95 - Épuisé
Tamron Rear Lens Cap for Nikon
Tamron Rear Lens Cap for Pentax
$ 5.95 - Épuisé
Tamron Rear Lens Cap for Pentax
Tamron Rear Lens Cap for Sony
$ 5.95 - Épuisé
Tamron Rear Lens Cap for Sony
Tamron SP 150-600mm f5-6.3 Di VC USD G2 Canon Mount
$ 1,399.00 - Épuisé
Tamron SP 150-600mm f5-6.3 Di VC USD G2 Canon Mount
Tamron SKU: AFA022C-700 | Helix SKU: TRAFA022C700
Overview
The SP 150-600mm G2 (Generation 2) ultra-telephoto lens with upgraded optical performance enables handheld shooting with remarkable definition. This new lens builds upon the success of the current SP 150-600mm (Model A011) which Tamron first introduced in December, 2013, including better overall optical performance and faster AF speed, VC enhancements, plus Fluorine Coating, FLEX ZOOM LOCK and tele converter.
Rebuilt from the ground up to meet Tamron’s strict quality standards and design specifications, this new zoom combines smart engineering and high performance with quality craftsmanship, durability and user friendliness.
The SP 150-600mm G2 includes three LD (Low Dispersion) lens elements which completely eliminate axial and transverse chromatic aberrations. It also features upgraded optical construction (21 elements in 13 groups).
Anti-reflection technologies, eBAND (Extended Bandwidth & Angular-Dependency) Coating and BBAR (Broad-Band Anti-Reflection) Coating improve light transmission and suppress internal reflections, including light reflected off the camera’s image sensors. So even when taking a backlit or semi-backlit photograph, ghosting and flare caused by reflected light are fully eliminated.
Additional enhancements expand the lens’ versatility. For example, MOD (Minimum Object Distance) has been reduced to 2.2m (86.6 in) so you can enjoy tele-macro photography and dramatic bokeh.
The Model A022 is equipped with the USD (Ultrasonic Silent Drive) ring-type motor that delivers excellent responsiveness and control. AF speed is significantly improved from current model, and it enables accurate high-speed focus even when capturing moving subjects.
When shooting with AF, the Full-time Manual Focus override allows you to instantly make fine focusing adjustments manually, without having to switch between modes.
The VC (Vibration Compensation) effectiveness is equivalent to 4.5 stops, based on image stabilization performance levels established by CIPA (Camera & Imaging Products Association) when using in VC MODE 3. Model A022 now has three types of VC modes, and it is possible to choose the optimum VC mode according to the situation for taking a photograph, such as when wishing to pan the camera.
The improved VC minimizes blurring caused by slight camera movement, which is prevalent with long telephoto lenses and even more troublesome with higher-resolution cameras. VC enhances the freedom of hand-held shooting at slower shutter speeds required by low-light conditions such as dusk.
VC MODE 1 is the standard mode that strikes a great balance between the stability of the viewfinder image and the stabilization effects.
VC MODE 2 is exclusively used for panning.
VC MODE 3 prioritizes the stabilization of the captured images and forgoes the stabilization of the viewfinder image.
With the optional accessory TAMRON TAP-in Console™, you can custom the configuration of VC MODE 1. Choose the viewfinder view of either Standard or viewfinder image priority.
FLEX ZOOM LOCK mechanism quickly locks or unlocks the zoom at any position simply by sliding the zoom ring. Photographers can shoot from any angle without the zoom extending unintentionally. Additionally, the customary Zoom Lock switch prevents unwanted barrel extension during transportation.
This design philosophy in pursuit of functional beauty with a “Human Touch” is applied even to minute details for the SP 150-600mm G2 ultra-telephoto lens as well.
The design includes the front portion of the lens composed of curved surfaces that comfortably fit in the palm of a photographer’s hand, the focus ring and zoom ring with the groove width optimized to improve user-friendliness, the focus limiter switch allowing for easy operation, the easy-to-hold grip compatible with the Arca-Swiss type quick release system, and other features. The lens hood with smooth curves that fit the lens barrel has a design that allows for its easy attachment and removal. While using metal as the exterior material and adding numerous new functions such as the FLEX ZOOM LOCK mechanism, the SP 150-600mm G2 achieves a size and weight making comfortable handheld shooting possible, with a slim and stylish appearance design to top it all off.
Two exclusive tele converters, which match the optics of the new SP 150-600mm G2, offer 1.4x and 2.0x magnification, and provide a maximum zoom range up to 1200mm. These new tele converters extend focal length of the master lens, making it possible to take pictures in farther ultra-telephoto ranges.
Specifications
| Model | A022 |
|---|---|
| Focal Length | 150-600mm |
| Maximum Aperture | F/5-6.3 |
| Angle of View (diagonal) | 16°25' - 4°8' (for full-frame format) 10°38' - 2°40' (for APS-C format) |
| Optical Construction | 21 elements in 13 groups |
| Minimum Object Distance | 2.2m (86.6 in) |
| Maximum Magnification Ratio | 1:3.9 |
| Filter Size | φ95mm |
| Maximum Diameter | φ108.4mm |
| Length* | 260.2mm (10.2 in) Canon 257.7mm (10.1 in) Nikon 259.7mm (10.2 in) Sony |
| Weight** | 2,010g (70.9 oz) Canon 1,990g (70.2 oz) Nikon 1,955g (69 oz) Sony |
| Aperture Blades | 9 (circular diaphragm)*** |
| Minimum Aperture | F/32-40 |
| Image Stabilization Performance | 4.5 stops (CIPA Standards Compliant) Using in VC MODE 3 For Canon: 5D-MKIII is used / For Nikon: D810 is used |
| Standard Accessories | Lens hood, Lens caps, Lens pouch |
| Compatible Mounts | Canon, Nikon, Sony**** |
Specifications, appearance, functionality, etc. are subject to change without prior notice.
* Length is the distance from the front tip of the lens to the lens mount face.
** Weight includes the weight of detachable tripod mount.
*** The circular diaphragm stays almost perfectly circular up to two stops down from maximum aperture.
**** Sony mount model without VC.
Tamron SP 150-600mm f5-6.3 Di VC USD G2 Nikon Mount
$ 1,399.00 - Épuisé
Tamron SP 150-600mm f5-6.3 Di VC USD G2 Nikon Mount
Tamron SKU: AFA022N-700 | Helix SKU: TRAFA022N700
Overview
The SP 150-600mm G2 (Generation 2) ultra-telephoto lens with upgraded optical performance enables handheld shooting with remarkable definition. This new lens builds upon the success of the current SP 150-600mm (Model A011) which Tamron first introduced in December, 2013, including better overall optical performance and faster AF speed, VC enhancements, plus Fluorine Coating, FLEX ZOOM LOCK and tele converter.
Rebuilt from the ground up to meet Tamron’s strict quality standards and design specifications, this new zoom combines smart engineering and high performance with quality craftsmanship, durability and user friendliness.
The SP 150-600mm G2 includes three LD (Low Dispersion) lens elements which completely eliminate axial and transverse chromatic aberrations. It also features upgraded optical construction (21 elements in 13 groups).
Anti-reflection technologies, eBAND (Extended Bandwidth & Angular-Dependency) Coating and BBAR (Broad-Band Anti-Reflection) Coating improve light transmission and suppress internal reflections, including light reflected off the camera’s image sensors. So even when taking a backlit or semi-backlit photograph, ghosting and flare caused by reflected light are fully eliminated.
Additional enhancements expand the lens’ versatility. For example, MOD (Minimum Object Distance) has been reduced to 2.2m (86.6 in) so you can enjoy tele-macro photography and dramatic bokeh.
The Model A022 is equipped with the USD (Ultrasonic Silent Drive) ring-type motor that delivers excellent responsiveness and control. AF speed is significantly improved from current model, and it enables accurate high-speed focus even when capturing moving subjects.
When shooting with AF, the Full-time Manual Focus override allows you to instantly make fine focusing adjustments manually, without having to switch between modes.
The VC (Vibration Compensation) effectiveness is equivalent to 4.5 stops, based on image stabilization performance levels established by CIPA (Camera & Imaging Products Association) when using in VC MODE 3. Model A022 now has three types of VC modes, and it is possible to choose the optimum VC mode according to the situation for taking a photograph, such as when wishing to pan the camera.
The improved VC minimizes blurring caused by slight camera movement, which is prevalent with long telephoto lenses and even more troublesome with higher-resolution cameras. VC enhances the freedom of hand-held shooting at slower shutter speeds required by low-light conditions such as dusk.
VC MODE 1 is the standard mode that strikes a great balance between the stability of the viewfinder image and the stabilization effects.
VC MODE 2 is exclusively used for panning.
VC MODE 3 prioritizes the stabilization of the captured images and forgoes the stabilization of the viewfinder image.
With the optional accessory TAMRON TAP-in Console™, you can custom the configuration of VC MODE 1. Choose the viewfinder view of either Standard or viewfinder image priority.
FLEX ZOOM LOCK mechanism quickly locks or unlocks the zoom at any position simply by sliding the zoom ring. Photographers can shoot from any angle without the zoom extending unintentionally. Additionally, the customary Zoom Lock switch prevents unwanted barrel extension during transportation.
This design philosophy in pursuit of functional beauty with a “Human Touch” is applied even to minute details for the SP 150-600mm G2 ultra-telephoto lens as well.
The design includes the front portion of the lens composed of curved surfaces that comfortably fit in the palm of a photographer’s hand, the focus ring and zoom ring with the groove width optimized to improve user-friendliness, the focus limiter switch allowing for easy operation, the easy-to-hold grip compatible with the Arca-Swiss type quick release system, and other features. The lens hood with smooth curves that fit the lens barrel has a design that allows for its easy attachment and removal. While using metal as the exterior material and adding numerous new functions such as the FLEX ZOOM LOCK mechanism, the SP 150-600mm G2 achieves a size and weight making comfortable handheld shooting possible, with a slim and stylish appearance design to top it all off.
Two exclusive tele converters, which match the optics of the new SP 150-600mm G2, offer 1.4x and 2.0x magnification, and provide a maximum zoom range up to 1200mm. These new tele converters extend focal length of the master lens, making it possible to take pictures in farther ultra-telephoto ranges.
Specifications
| Model | A022 |
|---|---|
| Focal Length | 150-600mm |
| Maximum Aperture | F/5-6.3 |
| Angle of View (diagonal) | 16°25' - 4°8' (for full-frame format) 10°38' - 2°40' (for APS-C format) |
| Optical Construction | 21 elements in 13 groups |
| Minimum Object Distance | 2.2m (86.6 in) |
| Maximum Magnification Ratio | 1:3.9 |
| Filter Size | φ95mm |
| Maximum Diameter | φ108.4mm |
| Length* | 260.2mm (10.2 in) Canon 257.7mm (10.1 in) Nikon 259.7mm (10.2 in) Sony |
| Weight** | 2,010g (70.9 oz) Canon 1,990g (70.2 oz) Nikon 1,955g (69 oz) Sony |
| Aperture Blades | 9 (circular diaphragm)*** |
| Minimum Aperture | F/32-40 |
| Image Stabilization Performance | 4.5 stops (CIPA Standards Compliant) Using in VC MODE 3 For Canon: 5D-MKIII is used / For Nikon: D810 is used |
| Standard Accessories | Lens hood, Lens caps, Lens pouch |
| Compatible Mounts | Canon, Nikon, Sony**** |
Specifications, appearance, functionality, etc. are subject to change without prior notice.
* Length is the distance from the front tip of the lens to the lens mount face.
** Weight includes the weight of detachable tripod mount.
*** The circular diaphragm stays almost perfectly circular up to two stops down from maximum aperture.
**** Sony mount model without VC.
Tamron SP 24-70mm F/2.8 Di VC USD G2 - Canon Mount
$ 1,199.00 - Épuisé
Tamron SP 24-70mm F/2.8 Di VC USD G2 - Canon Mount
Tamron SKU: A032C-700 | Helix SKU: TRAFA032C700
Overview
Meet Tamron's next generation high performance fast zoom that achieves top-level image quality and performance. Equipped with a new Dual MPU (Micro Processing Units), the lens provides excellent focusing speed with the highest vibration compensation performance of any lens in its class at 5 stops (CIPA-rated). Other new features include e-Band coating for maximum suppression of ghosting and flare, fluorine coating, and new lens hood release lock. And it's compatible with the TAP-in Console. Your world never looked this beautiful.
- Sophisticated design delivers superb performance and ultra-high image quality
- eBAND Coating reduces flare and ghosting
- High performance MPU for AF dramatically improves autofocusing accuracy and speed
- Dedicated MPU delivers the highest image stabilization in class at 5 CIPA-rated stops
- New VC Auto Detect mode 2 for panning
- Fluorine Coating and Moisture-Resistant Construction
- New Built-in Lens Hood Lock to avoid accidental misalignment of hood
- Compatible with TAMRON TAP-in Console™, an optional accessory product
Tamron SP 24-70mm F/2.8 Di VC USD G2 - Nikon Mount
$ 1,199.00 - Épuisé
Tamron SP 24-70mm F/2.8 Di VC USD G2 - Nikon Mount
Tamron SKU: A032N-700 | Helix SKU: TRAFA032N700
Overview
Meet Tamron's next generation high performance fast zoom that achieves top-level image quality and performance. Equipped with a new Dual MPU (Micro Processing Units), the lens provides excellent focusing speed with the highest vibration compensation performance of any lens in its class at 5 stops (CIPA-rated). Other new features include e-Band coating for maximum suppression of ghosting and flare, fluorine coating, and new lens hood release lock. And it's compatible with the TAP-in Console. Your world never looked this beautiful.
- Sophisticated design delivers superb performance and ultra-high image quality
- eBAND Coating reduces flare and ghosting
- High performance MPU for AF dramatically improves autofocusing accuracy and speed
- Dedicated MPU delivers the highest image stabilization in class at 5 CIPA-rated stops
- New VC Auto Detect mode 2 for panning
- Fluorine Coating and Moisture-Resistant Construction
- New Built-in Lens Hood Lock to avoid accidental misalignment of hood
- Compatible with TAMRON TAP-in Console™, an optional accessory product
Tamron SP 35mm f/1.4 Di USD - Canon EF Mount
$ 899.00 - Épuisé
Tamron SP 35mm f/1.4 Di USD - Canon EF Mount
Tamron SKU: AFF045C700 | Helix SKU: TRAFF045C700
Overview
Tamron’s SP (Superior Performance) lens series was born in 1979, making this year the 40th anniversary of the series. In celebration, Tamron has developed the Model F045, the distillation of Tamron’s accumulated lens-making expertise and craftsmanship. This orthodox fixed focal lens, which some consider the most basic of all interchangeable lenses, is the embodiment of all optical technology and manufacturing knowhow Tamron has developed to date. The Model F045’s unprecedented high-resolution image quality and beautiful, appealing background bokeh let photographers capture any scene down to the finest details. The external lens barrel was developed through tireless pursuit of operability and durability, focusing constantly on the needs of photographers. This lens is equipped with a large F/1.4 aperture and high-speed, high-precision AF functionality offering exceptional reliability, plus various other features for increased convenience, making it the perfect everyday lens for your creative pursuits.
Features:
- Consummate image quality across the entire frame from edge-to-edge including four LD (Low Dispersion) and three GM (Glass Molded Aspherical) lens elements
- Even at its maximum aperture of F/1.4, high resolution performance is achieved from the center of the frame to the edges, providing superior aberration correction to maintain perfect fidelity of point shapes resulting in ultimate ultra-high image quality
- Next-generation BBAR-G2 Coating
- Exceptionally reliable, fast and accurate AF
- Breakthrough Dynamic Rolling-cam mechanism minimizes the drive load placed on the focus lens component and ensures stable AF operating performance and improves reliability even under the harsh shooting conditions of professional use, including high and low temperature extremes
- Moisture-Resistant Construction
- Vastly improved highly durable Fluorine Coating
- Locking lens hood for precise positioning
- Compatible with TAMRON TAP-in Console
Specifications:
- Model Name: F045
- Minimum Focus Distance: 11.8"
- Focal Length: 35mm
- Max. Mag. Ratio: 1:5
- Format size: Di
- Maximum Diameter: 80.9mm
- Maximum Aperture: F/1.4
- Minimum Aperture: F/16
- Diagonal Angle of View: 63° 26' (for full-frame DSLR cameras)
- Diaphragm Blades: 9 (circular diaphragm)
- Lens Construction: 14 elements, 10 groups
- Standard Accessory: Flower-shaped hood, pouch and caps
- Filter Diameter: 72mm
- Compatible Mount: Canon
Approximate Dimensions:
- Length: 4.1"
Approximate Weight:
- Unit: 28.7 oz
- Shipping: 2 lbs
Warranty Information:
- Manufacturer Warranty (authorized online retailer): One Year Parts and Labor
Tamron SP 35mm f/1.4 Di USD - Nikon F-Mount
$ 899.00
Tamron SP 35mm f/1.4 Di USD - Nikon F-Mount
Tamron SKU: AFF045N700 | Helix SKU: TRAFF045N700
Overview
Tamron’s SP (Superior Performance) lens series was born in 1979, making this year the 40th anniversary of the series. In celebration, Tamron has developed the Model F045, the distillation of Tamron’s accumulated lens-making expertise and craftsmanship. This orthodox fixed focal lens, which some consider the most basic of all interchangeable lenses, is the embodiment of all optical technology and manufacturing knowhow Tamron has developed to date. The Model F045’s unprecedented high-resolution image quality and beautiful, appealing background bokeh let photographers capture any scene down to the finest details. The external lens barrel was developed through tireless pursuit of operability and durability, focusing constantly on the needs of photographers. This lens is equipped with a large F/1.4 aperture and high-speed, high-precision AF functionality offering exceptional reliability, plus various other features for increased convenience, making it the perfect everyday lens for your creative pursuits.
Features:
- Consummate image quality across the entire frame from edge-to-edge including four LD (Low Dispersion) and three GM (Glass Molded Aspherical) lens elements
- Even at its maximum aperture of F/1.4, high resolution performance is achieved from the center of the frame to the edges, providing superior aberration correction to maintain perfect fidelity of point shapes resulting in ultimate ultra-high image quality
- Next-generation BBAR-G2 Coating
- Exceptionally reliable, fast and accurate AF
- Breakthrough Dynamic Rolling-cam mechanism minimizes the drive load placed on the focus lens component and ensures stable AF operating performance and improves reliability even under the harsh shooting conditions of professional use, including high and low temperature extremes
- Moisture-Resistant Construction
- Vastly improved highly durable Fluorine Coating
- Locking lens hood for precise positioning
- Compatible with TAMRON TAP-in Console
Specifications:
- Model Name: F045
- Minimum Focus Distance: 11.8"
- Focal Length: 35mm
- Max. Mag. Ratio: 1:5
- Format size: Di
- Maximum Diameter: 80.9mm
- Maximum Aperture: F/1.4
- Minimum Aperture: F/16
- Diagonal Angle of View: 63° 26' (for full-frame DSLR cameras)
- Diaphragm Blades: 9 (circular diaphragm)
- Lens Construction: 14 elements, 10 groups
- Standard Accessory: Flower-shaped hood, pouch and caps
- Filter Diameter: 72mm
- Compatible Mount: Nikon
Approximate Dimensions:
- Length: 4"
Approximate Weight:
- Unit: 28.4 oz
- Shipping: 2 lbs
Warranty Information:
- Manufacturer Warranty (authorized online retailer): One Year Parts and Labor
Tamron SP 70-200mm F/2.8 Di VC USD G2 - Canon EF
$ 1,299.00
Tamron SP 70-200mm F/2.8 Di VC USD G2 - Canon Mount
Tamron SKU: A025C700 | Helix SKU: TRAFA025C700
Overview
Expand your image of fast telephoto shooting
The new SP70-200mm F/2.8 G2 (Model A025) telephoto lens re-imagines the highly acclaimed Model A009 with enhanced optical performance, improved VC (Vibration Compensation), faster AF speed and accuracy, and shortened MOD (Minimum Object Distance) for greater flexibility. What’s more, compatibility with Tamron teleconverters provides additional focal length.
In keeping with the SP series’ innovative technology, the lens is designed to be durable, flexible and resilient enough to rise to any occasion.
Tamron SP 70-200mm F/2.8 Di VC USD G2 - Nikon F
$ 1,299.00
Tamron SP 70-200mm F/2.8 Di VC USD G2 - Nikon Mount
Tamron SKU: AFA025N700 | Helix SKU: TRAFA025N700
Overview
Expand your image of fast telephoto shooting
The new SP70-200mm F/2.8 G2 (Model A025) telephoto lens re-imagines the highly acclaimed Model A009 with enhanced optical performance, improved VC (Vibration Compensation), faster AF speed and accuracy, and shortened MOD (Minimum Object Distance) for greater flexibility. What’s more, compatibility with Tamron teleconverters provides additional focal length.
In keeping with the SP series’ innovative technology, the lens is designed to be durable, flexible and resilient enough to rise to any occasion.
TAP Photo Folder Buckeye /Gold 6X4 (25 Pack) Horizontal TABF6425- New
$ 13.50
TAP Photo Folder Buckeye /Gold 6X4 (25 Pack) Horizontal TABF6425- New
TAP Photo Folder Buckeye Black/Gold 6x4 (10 Pack) Horizontal TABF6410- New
$ 7.00
TAP Photo Folder Buckeye Black/Gold 6x4 (10 Pack) Horizontal TABF6410- New
- Black with gold trim
- For horizontal 6x4 prints
- Bottom loading
- Package of 10
Helix Product # TABF6410
TAP Photo Folder Buckeye Black/Gold 6x4 (50 Pack) Horizontal TABF6450- New
$ 26.95
TAP Photo Folder Buckeye Black/Gold 6x4 (50 Pack) Horizontal TABF6450- New
TAP Photo Folder Buckeye Black/Gold 7x5 (10 Pack) Horizontal TABF7510- New
$ 9.00
TAP Photo Folder Buckeye Black/Gold 7x5 (10 Pack) Horizontal TABF7510- New
TAP Photo Folder Buckeye Black/Gold 7x5 (25 Pack) Horizontal TABF7525- New
$ 17.50
TAP Photo Folder Buckeye Black/Gold 7x5 (25 Pack) Horizontal TABF7525- New
TAP Photo Folder Whitehouse White & Gold 6x4 (10 Pack) Horizontal
$ 7.99
TAP Photo Folder Whitehouse White/Gold 6x4 (10 Pack) Horizontal TAWF6410- New
TAP Photo Folder Whitehouse White & Gold 6x4 (25 Pack) Horizontal
$ 13.99
TAP Photo Folder Whitehouse White/Gold 6x4 (25 Pack) Horizontal TAWF6425- New
TAP Photo Folder Whitehouse White/Gold 4x6 (10 Pack) Vertical
$ 7.00
TAP Photo Folder Whitehouse White/Gold 4x6 (10 Pack) Vertical
TAP SKU: TAWF4610 | Helix SKU: TAWF4610
Overview
Size: 4x6
Color: White/Gold
Bottom loading
TAP Photo Folder Whitehouse White/Gold 4x6 (25 Pack) Vertical
$ 13.50
TAP Photo Folder Whitehouse White/Gold 4x6 (25 Pack) Vertical
TAP SKU: TAWF4625 | Helix SKU: TAWF4625
Overview
Size: 4x6
Color: White/Gold
Bottom loading
TAP Photo Folder Whitehouse White/Gold 5x7 (10 Pack) Vertical TAWF5710- New
$ 4.99
TAP Photo Folder Whitehouse White/Gold 5x7 (10 Pack) Vertical TAWF5710- New
Think Tank Airport Advantage - Black
$ 296.75 - Épuisé
Think Tank Airport Advantage - Black
Think Tank SKU: 730553 | Helix SKU: TT730553
Overview
Designed for traveling photographers, the Airport Advantage roller is sized to meet commuter or regional jet carry-on requirements.*
The roller’s customizable interior allows you to carry the maximum amount of gear on the plane. The Airport Advantage’s lightweight design helps meet weight restrictions, yet features the same level of protection for which Think Tank is known.
Key Features:
- Specially designed interior to maximize gear for carry-on for small aircraft such as commuter and regional jets. Meets U.S. and international airline carry-on requirements*
- Ultra light design weighs only 5.9 lbs. (2.7kg), keeping your roller under weight restrictions
- Dedicated laptop pocket† fits up to 15” laptops in a padded sleeve
*Check with your airline for current carry-on requirements
†Laptop may expand external dimensions of the roller
Additional Features:
- Custom designed retractable handle with inset channel on aluminum tubing for added strength and durability
- Tripod mount and water bottle pocket on side. (Additional straps included for larger tripods)
- YKK® RC Fuse zippers, and closed-cell PU foam are the highest quality materials in the industry
- Fits two camera bodies with lenses attached
- Lockable zipper sliders (lock not included)
- Interior zippered pockets for batteries, memory cards, filters and accessories
- User replaceable retractable handle, wheels, wheel housings, and front foot extends product life
- Custom-designed, high-performance, 80mm wheels with sealed ABEC grade 5 bearings for quiet rolling
- Seam-sealed rain cover included
- Handles on three sides ensure rapid and easy retrieval from overhead bins, car trunks, etc.
- Closed-cell foam dividers support heavy gear and maintain strength over time
- Business card holder on top for identification
What Fits:
- 1 gripped DSLR with lens attached, 1 standard size DSLR with lens attached plus 3–4 additional lenses, and 15” laptop
- Or 2 gripped DSLRs with lenses detached plus 3–4 lenses
- Or 2 Mirrorless bodies with a crazy amount of lenses
- Max Lens: 200–400mm f/4 detached (hood reversed)
- Fits two camera bodies with lenses attached
Specifications
Specifications:
Interior Dimensions:
12” W x 18” H x 4.9–6.4” D (30.5 x 45.7 x 12.4–16.3 cm)
Exterior Dimensions:
12.7” W x 19.5” H x 7.3” D (32.3 x 49.5 x 18.5 cm)
Laptop Compartment:
11.6” x 16.4” x 2.9” (29.5 x 41.6 x 7.4 cm)
Weight:
5.9–6.2 lbs. (2.7–2.8 kg)*
*Lowest weight reflects all accessories removed while using only minimal dividers
Materials:
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 420D velocity nylon
- YKK® RC Fuse (abrasion-resistant) zippers
- Custom designed extra tall skid plates
- High performance 80mm super quiet wheels with sealed bearings
- Rubberized laminate reinforcement
- Nylon webbing
- 3-ply bonded nylon thread
- 210D silver-toned nylon
- Polyurethane backed nylex liner and dividers
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Closed cell foam dividers
- Mesh pockets
- 3-ply bonded nylon thread
Item Includes
- Reinforced padded dividers
- Tripod Straps
- Seam-sealed rain cover
Think Tank Airport Advantage - Graphite
$ 269.75 - Épuisé
Think Tank Airport Advantage - Graphite
Think Tank SKU: 730552 | Helix SKU: TT730552
Overview
Designed for traveling photographers, the Airport Advantage roller is sized to meet commuter or regional jet carry-on requirements.*
The roller’s customizable interior allows you to carry the maximum amount of gear on the plane. The Airport Advantage’s lightweight design helps meet weight restrictions, yet features the same level of protection for which Think Tank is known.
Key Features:
- Specially designed interior to maximize gear for carry-on for small aircraft such as commuter and regional jets. Meets U.S. and international airline carry-on requirements*
- Ultra light design weighs only 5.9 lbs. (2.7kg), keeping your roller under weight restrictions
- Dedicated laptop pocket† fits up to 15” laptops in a padded sleeve
*Check with your airline for current carry-on requirements
†Laptop may expand external dimensions of the roller
Additional Features:
- Custom designed retractable handle with inset channel on aluminum tubing for added strength and durability
- Tripod mount and water bottle pocket on side. (Additional straps included for larger tripods)
- YKK® RC Fuse zippers, and closed-cell PU foam are the highest quality materials in the industry
- Fits two camera bodies with lenses attached
- Lockable zipper sliders (lock not included)
- Interior zippered pockets for batteries, memory cards, filters and accessories
- User replaceable retractable handle, wheels, wheel housings, and front foot extends product life
- Custom-designed, high-performance, 80mm wheels with sealed ABEC grade 5 bearings for quiet rolling
- Seam-sealed rain cover included
- Handles on three sides ensure rapid and easy retrieval from overhead bins, car trunks, etc.
- Closed-cell foam dividers support heavy gear and maintain strength over time
- Business card holder on top for identification
What Fits:
- 1 gripped DSLR with lens attached, 1 standard size DSLR with lens attached plus 3–4 additional lenses, and 15” laptop
- Or 2 gripped DSLRs with lenses detached plus 3–4 lenses
- Or 2 Mirrorless bodies with a crazy amount of lenses
- Max Lens: 200–400mm f/4 detached (hood reversed)
- Fits two camera bodies with lenses attached
Specifications
Specifications:
Interior Dimensions:
12” W x 18” H x 4.9–6.4” D (30.5 x 45.7 x 12.4–16.3 cm)
Exterior Dimensions:
12.7” W x 19.5” H x 7.3” D (32.3 x 49.5 x 18.5 cm)
Laptop Compartment:
11.6” x 16.4” x 2.9” (29.5 x 41.6 x 7.4 cm)
Weight:
5.9–6.2 lbs. (2.7–2.8 kg)*
*Lowest weight reflects all accessories removed while using only minimal dividers
Materials:
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 420D velocity nylon
- YKK® RC Fuse (abrasion-resistant) zippers
- Custom designed extra tall skid plates
- High performance 80mm super quiet wheels with sealed bearings
- Rubberized laminate reinforcement
- Nylon webbing
- 3-ply bonded nylon thread
- 210D silver-toned nylon
- Polyurethane backed nylex liner and dividers
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Closed cell foam dividers
- Mesh pockets
- 3-ply bonded nylon thread
Item Includes
- Reinforced padded dividers
- Tripod Straps
- Seam-sealed rain cover
Think Tank Airport Advantage XT - Black
$ 329.75 - Épuisé
Think Tank Airport Advantage XT - Black
Think Tank SKU: 730556 | Helix SKU: TT730556
Overview
Weighing only 7.5 lbs. (3.4kg), the Airport Advantage XT rolling camera case meets increasingly restrictive International airline requirements, yet still provides the ample quality and protection you’ve come to expect from Think Tank.
The Airport Advantage XT fits two gripped DSLR camera bodies and several lenses, enabling traveling photographers to carry the maximum amount of gear on the plane. And our proprietary two-tone fabric creates a stylish look yet doesn’t proclaim the case is full of expensive camera gear.
Key Features:
- Specially designed interior to maximize gear for carry-on. Meets most U.S. and International airline carry-on requirements*
- Ultra-lightweight design weighs only 7.5 lbs. (3.4 kg), keeping your bag under weight restrictions
- Front pocket fits up to a 17” laptop and 10” tablet†
*Check with your airline for current carry-on requirements
†Laptop may expand external dimensions of the roller
Additional Features:
- Custom designed retractable handle with inset channel on aluminium tubing adds strength and durability
- Side pocket for tripod mount (additional straps included for larger tripods)
- Extra tall handle height keeps the bag away from your feet when rolling
- YKK® RC Fuse zippers, and closed-cell PU foam are the highest quality materials in the industry
- Fits up to two gripped camera bodies with lenses attached
- Lockable zipper sliders (lock not included)
- Interior zippered pockets for batteries, CF cards, filters and accessories
- User replaceable retractable handle, wheels, wheel housings, and front foot
- Custom-designed, high-performance, 80mm super quiet wheels with sealed bearings
- Seam-sealed rain cover included
- Grab handles on three sides for lifting bag into the overhead bin
- Closed-cell foam dividers support heavy gear and maintain strength over time
- Hypalon reinforced rear corners increase durability
- Business card holder on top for identification
What Fits:
- Holds Two Gripped DSLRs with lenses attached, plus 5–8 additional lenses, and up to a 17” laptop
- Mirrorless video kit with lenses, batteries, DJI Ronin-S and DJI Mavic Pro
Specifications
Specifications:
Interior Dimensions:
13.3” W x 18” H x 6.5–7.5” D (33.8 x 45.7 x 16.5–19.1 cm)
Exterior Dimensions:
14” W x 21” H x 8” D (35.6 x 53.3 x 20.3 cm)
Laptop Compartment:
13.8” x 17.3” x 2” (35 x 44 x 5 cm)
Tablet Compartment:
10” x 10” x 1.6” (25.4 x 25.4 x 4 cm)
Weight:
7–7.8 lbs. (3.18–3.59 kg)
Lowest weight reflects all accessories removed while using only minimal dividers
Materials:
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 500D 2-tone poly tech-weave
- YKK® RC Fuse (abrasion-resistant) zippers
- High performance 80mm super quiet wheels with sealed bearings
- Rubberized laminate reinforcement
- Nylon webbing
- 3-ply bonded nylon thread
Interior:
- 210D silver-toned nylon
- Polyurethane backed nylex liner and dividers
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Stiffened closed-cell foam dividers
- Mesh pockets
- 3-ply bonded nylon thread
Item Includes
Think Tank Airport Advantage XT - Graphite
$ 329.75 - Épuisé
Think Tank Airport Advantage XT - Graphite
Think Tank SKU: 730555 | Helix SKU: TT730555
Overview
Weighing only 7.5 lbs. (3.4kg), the Airport Advantage XT rolling camera case meets increasingly restrictive International airline requirements, yet still provides the ample quality and protection you’ve come to expect from Think Tank.
The Airport Advantage XT fits two gripped DSLR camera bodies and several lenses, enabling traveling photographers to carry the maximum amount of gear on the plane. And our proprietary two-tone fabric creates a stylish look yet doesn’t proclaim the case is full of expensive camera gear.
Key Features:
- Specially designed interior to maximize gear for carry-on. Meets most U.S. and International airline carry-on requirements*
- Ultra-lightweight design weighs only 7.5 lbs. (3.4 kg), keeping your bag under weight restrictions
- Front pocket fits up to a 17” laptop and 10” tablet†
*Check with your airline for current carry-on requirements
†Laptop may expand external dimensions of the roller
Additional Features:
- Custom designed retractable handle with inset channel on aluminium tubing adds strength and durability
- Side pocket for tripod mount (additional straps included for larger tripods)
- Extra tall handle height keeps the bag away from your feet when rolling
- YKK® RC Fuse zippers, and closed-cell PU foam are the highest quality materials in the industry
- Fits up to two gripped camera bodies with lenses attached
- Lockable zipper sliders (lock not included)
- Interior zippered pockets for batteries, CF cards, filters and accessories
- User replaceable retractable handle, wheels, wheel housings, and front foot
- Custom-designed, high-performance, 80mm super quiet wheels with sealed bearings
- Seam-sealed rain cover included
- Grab handles on three sides for lifting bag into the overhead bin
- Closed-cell foam dividers support heavy gear and maintain strength over time
- Hypalon reinforced rear corners increase durability
- Business card holder on top for identification
What Fits:
- Holds Two Gripped DSLRs with lenses attached, plus 5–8 additional lenses, and up to a 17” laptop
- Mirrorless video kit with lenses, batteries, DJI Ronin-S and DJI Mavic Pro
Specifications
Specifications:
Interior Dimensions:
13.3” W x 18” H x 6.5–7.5” D (33.8 x 45.7 x 16.5–19.1 cm)
Exterior Dimensions:
14” W x 21” H x 8” D (35.6 x 53.3 x 20.3 cm)
Laptop Compartment:
13.8” x 17.3” x 2” (35 x 44 x 5 cm)
Tablet Compartment:
10” x 10” x 1.6” (25.4 x 25.4 x 4 cm)
Weight:
7–7.8 lbs. (3.18–3.59 kg)
Lowest weight reflects all accessories removed while using only minimal dividers
Materials:
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 500D 2-tone poly tech-weave
- YKK® RC Fuse (abrasion-resistant) zippers
- High performance 80mm super quiet wheels with sealed bearings
- Rubberized laminate reinforcement
- Nylon webbing
- 3-ply bonded nylon thread
Interior:
- 210D silver-toned nylon
- Polyurethane backed nylex liner and dividers
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Stiffened closed-cell foam dividers
- Mesh pockets
- 3-ply bonded nylon thread
Item Includes
Think Tank Airport International V3.0
$ 439.75 - Épuisé
Think Tank Airport International V3.0
Think Tank SKU: 730563 | Helix SKU: TT730563
Overview
KEY FEATURES:
- Specially designed interior to maximize gear for carry on, meets most International (and U.S.) airline carry on requirements*
- Dedicated padded laptop and tablet compartments located in a lockable pocket
- TSA-accepted zipper locks for the main compartment, and high-strength coated cable and combination lock for the laptop compartment and securing your bag to an immovable object
*Check with your airline for current carry on requirements
Specifications
SPECIFICATIONS
13” W x 18.5” H x 6.5–7.5” D (33 x 47 x 16.5–19.1 cm)
Exterior Dimensions:
14” W x 21” H x 8” D (35.6 x 53.3 x 20.3 cm)
Tablet Compartment:
9.4” W x 10” H x 0.5” D (24 x 25.5 x 1.3 cm)
Laptop Compartment:
10.6” W x 15” H x 1.2” D (27 x 38 x 3 cm)
Weight:
9.6–11.5 lbs. (4.4–5.2 kg)*
*Lowest weight reflects all accessories removed while using only minimal dividers
MATERIALS
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 1680D ballistic nylon
- YKK® RC Fuse (abrasion-resistant) zippers
- Custom designed extra tall skid plates
- High performance 80mm super quiet wheels with sealed bearings
- Rubberized laminate reinforcement
- SpanKodra front pocket
- Nylon webbing
- 3-ply bonded nylon thread
Interior:
- 210D silver-toned nylon
- Polyurethane backed velex liner & dividers
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Closed cell foam & PE board reinforced dividers
- Clear mesh pockets
- 3-ply bonded nylon thread
WHAT FITS
- 2 Gripped DSLRs with lenses attached plus 2–4 additional lenses
- 15” laptop and a 10” tablet
- Max Lens: 500mm f/4 detached or 400mm f/2.8 attached (hood reversed)
Item Includes
IN THE BOX
- Reinforced padded dividers
- TSA travel padlock
- Cable lock
- Tripod Straps
- Tripod Cup
- Seam-sealed rain cover
Think Tank Airport Navigator
$ 318.75 - Épuisé
Think Tank Airport Navigator
Think Tank SKU: 730540 | Helix SKU: TT730540
Overview
Dual access roller with top and front openings for rapid and unobstructed gear access, holds up to a 300mm f/2.8
Key Features:
- Dual access, front and top openings for rapid access to gear
- Dedicated pockets provide easy access to up to a 10” tablet and most 15.4” laptops
- Shoulder strap included with telescoping handle pass-through for piggy-backing on other rolling luggage
Additional Features:
- Meets most International and US domestic carry-on requirements*
- Seam-sealed rain cover included
- Lockable zippers - locks not included
- Bottom handle for easy over head lifting
- User replaceable wheels
- Business card holder and zippered pocket
*Check with your airline for current carry-on requirements
What Fits:
- 2 gripped DSLRs
- 70–200mm f/2.8
- 300mm f/2.8 unmounted
- 1-2 additional lenses and/or two flashes
- Example: Nikon D3S with 70-200mm f/2.8 mounted, D810 with 24-70mm f/2.8 mounted, 50mm f/1.4, 105mm macro VR f/2.8, 14-24mm f/2.8, and 15" MacBook Pro
- Example: Canon 5DMIII with 16-35mm f/2.8 mounted, 5DMII with 50mm f/1.2 mounted, 70-200mm f/2.8, 24-70mm f/2.8, 24mm f/1.4, two 640EX-RT, iPad and 15" MacBook Pro
Specifications
Specifications
Internal Dimensions:
15” W x 13” H x 6.8” D (38.1 × 33 × 17.3cm)
Exterior Dimensions:
16” W x 15.5” H x 10” D (40.6 × 39.4 × 25.4cm)
Laptop Pocket
14.8” W x 11” H x 1.5” D (37.6 × 28 × 3.8cm)
Weight:
8.1–9.2 lbs (3.7–4.2 kg) Depending on accessories used
Materials
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 420D velocity nylon
- 420D high density nylon
- 600D brushed polyester
- YKK® RC Fuse (abrasion-resistant) zippers
- Replaceable in-line skate wheels
- Rubberized laminate reinforcement
- Antique nickel-plated metal hardware
- Ultra-stretch pockets
- 3D air mesh
- 3-ply bonded nylon thread
Interior:
- PE board reinforced removable closed cell foam velex dividers
- 210D silver-toned nylon
- Polyurethane-backed Velex liner
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Big hole mesh
- Belly-O mesh
- 3-ply bonded nylon thread
Item Includes
- Reinforced padded dividers
- Pass-thorugh shoulder strap
- Seam-sealed rain cover
Think Tank Airport Roller Derby
$ 429.75 - Épuisé
Think Tank Airport Roller Derby
Think Tank SKU: 730514 | Helix SKU: TT730514
Overview
Easy to maneuver with improved weight distribution to minimize muscle fatigue. Holds up to a 400mm f/2.8
Key Features:
- 4 dual wheel sets with multiple rolling positions reduces muscle fatigue
- Meets most International and US carry-on requirements*
- Fits up to a 15” laptop and 10" tablet in dedicated pockets
*Check with your airline for current carry-on requirements
Additional Features:
- Lock & cable to secure lockable zippers and tether the bag
- 3-ways to roll: upright at your side, back wheel tilt, or side wheel tilt
- Seam-sealed rain cover included
- Bottom handle for easy over head lifting
- Tripod mount and water bottle pocket on side
- 2-position locking handle extends to 39–42” for better ergonomics when pushing
- Interior zippered pockets for batteries, CF cards, filters and accessories
- Top zippered pocket for wallet or cell phone
- Rapid access side pocket for travel essentials
- Reinforced back panel for increased durability
- User replaceable wheels
- Seam sealed rain cover included
What Fits:
- 15” laptop
- 10” tablet
- 2 standard DSLRs with lenses attached
- 1 gripped DSLR and 1 standard DSLR both with lenses attached
- 6–7 standard zoom lenses or strobes
- 400mm f/2.8 unattached (without laptop in the bag ONLY)
- Example: Canon 5DMIII with 70-200mm f/2.8 mounted, 1DX with 24-70mm f/2.8 mounted, 16-35mm f/2.8, 90mm TS-E, 2x Extender, 580EX
- Example: Nikon D700 mounted to 70-200mm f/2.8, D810 mounted to 24-70mm f/2.8, 14-24mm f/2.8, 105mm f/2.8 macro, 50mm f/1.4, SB900
Specifications
Specifications:
Internal Dimensions:
12.6” W x 18.5” H x 5.5–7.5” D (32 × 47 × 14–19 cm)
Exterior Dimensions:
14” W x 22” H x 9.0” D (35.6 × 55.9 × 22.9 cm)
Tablet Compartment:
10.5” W x 10.3” H x 0.6” D (26.7 x 26.1 x 1.5 cm)
Laptop Compartment
10.5” W x 14.5” H x 1.0” D (26.7 x 36.8 x 2.5 cm)
Weight:
9.5–11.5 lbs (4.3–5.2 kg) depending on accessories used
Materials:
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 1680D ballistic nylon
- YKK® RC Fuse (abrasion-resistant) zippers
- 420D velocity nylon
- Custom-designed, replaceable wheels with sealed steel bearings
- Rubberized laminate reinforcement
- 3D air mesh
- 3-ply bonded nylon thread
- 210D silver-toned nylon
- Polyurethane backed velex liner & dividers
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Closed cell foam & PE board reinforced dividers
- Belly-O mesh pockets
- 3-ply bonded nylon thread
Item Includes
- Reinforced padded dividers
- TSA travel padlock
- Tripod/Monopod attachment straps
- Seam-sealed rain cover
Think Tank Airport Security V3.0
$ 449.75 - Épuisé
Think Tank Airport Security V3.0
Think Tank SKU: 730572 | Helix SKU: TT730572
Overview
The third generation of Think Tank’s award winning rolling bag series redefines the gold standard for photo transport cases.
WHAT'S NEW:
-
Reinforced telescoping handle
-
Dedicated, padded pocket for laptop and tablet
-
User-replaceable parts
Key Features:
- Specially designed interior to maximize gear for carry on, meets most U.S. airline carry-on requirements*
- Dedicated padded laptop and tablet compartments located in a lockable pocket
- TSA-accepted zipper locks for the main compartment, and high-strength coated cable and combination lock for the laptop compartment and securing your bag to an immovable object
*Check with your airline for current carry on requirements
Additional Features:
- Quick and easy access to the retractable handle
- Tripod mount pocket on side (Additional straps included for larger tripods)
- Expansive top compartment cradles large camera bodies for the perfect fit
- One piece construction reduces weight and improves strength
- Unique serial number for Lost & Found registration
- Interior zippered pockets for batteries, memory cards, filters and accessories
- User-replaceable retractable handle, wheels, wheel housings, feet and kick plate extends product life
- Custom-designed, high-performance, 80mm wheels with sealed ABEC grade 5 bearings for quiet rolling
- Extra tall wheel housings protect your bag from scrapes and scratches
- Seam-sealed rain cover included
- Stretchable front pocket
- Handles and grab-straps on all four sides ensure rapid and easy retrieval from overhead bins, car trunks, etc.
- Reinforced dividers support heavy gear and maintain strength over time
- Hypalon reinforced rear corners for increased durability
- Business card holder on top for easy identification
What Fits:
- 2 Gripped DSLRs with lenses attached plus 4–6 additional lenses
- 17” laptop and a 10” tablet
- Max Lens: 600mm f/4 detached or 500mm f/4 attached (hood reversed)
Specifications
Specifications
Internal Dimensions:
13” W x 21” H x 7–8” D (33 x 53.3 x 17.8–20.3 cm)
Exterior Dimensions:
14” W x 22” H x 9” D (35.6 x 55.9 x 22.9 cm)
Tablet Compartment:
9.4” W x 10” H x 0.5” D (24 x 25.5 x 1.3 cm)
Laptop Compartment:
11.4” W x 16.1” H x 1.2” D (29 x 41 x 3 cm)
Weight:
11.1–12.9 lbs. (5–5.8 kg)*
*Lowest weight reflects all accessories removed while using only minimal dividers
Materials
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 1680D ballistic nylon
- YKK® RC Fuse (abrasion-resistant) zippers
- Custom designed extra tall skid plates
- High performance 80mm super quiet wheels with sealed bearings
- Rubberized laminate reinforcement
- SpanKodra front pocket
- Nylon webbing
- 3-ply bonded nylon thread
- 210D silver-toned nylon
- Polyurethane backed velex liner & dividers
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Closed cell foam & PE board reinforced dividers
- Clear mesh pockets
- 3-ply bonded nylon thread
Item Includes
- Reinforced padded dividers
- TSA travel padlock
- Cable lock
- Tripod Straps
- Tripod Cup
- Seam-sealed rain cover
Think Tank Airport TakeOff V2.0
$ 419.75 - Épuisé
Think Tank Airport TakeOff V2.0
Think Tank SKU: 730499 | Helix SKU: TT730499
Overview
You can only take a rolling bag so far. When the terrain becomes uneven, simply convert the Airport TakeOff V2.0 to a backpack so you can carry your gear to the location.
Sized to meet the needs of a traveling professional, the Airport TakeOff V2.0 fits most U.S. domestic and international airline carry-on requirements.
Key Features:
- Integrated backpack straps with comfortable shoulder harness and back panel padding
- Holds up to a 400mm f/2.8, two standard bodies and other assorted lenses
- Large front pocket fits up to a 17” laptop* and a 10” tablet†
* Check with your airline for current carry-on requirements
† Artificial Intelligence V3.0 laptop sleeve is recommended and sold separately
Additional Features:
- Specially designed interior maximizes gear capacity for carry on yet still meets most U.S. domestic and international airline carry on requirements‡
- Custom designed retractable handle with inset channel on aluminum tubing adds strength and durability
- Dedicated, plush-lined pocket on the front flap for smartphone or sunglasses
- Pocket for tripod mount or water bottle on side (Additional straps included for larger tripods)
- Cable and combination lock included for securing the lockable zippers
- YKK RC Fuse zippers, ballistic nylon, high-density velex and closed-cell PU foam are the highest quality materials in the industry
- Top compartment cradles large camera bodies for a perfect fit
- Zippered organizer pocket on front of laptop compartment
- Interior zippered pockets for batteries, CF cards, filters and accessories
- Custom-designed, high-performance, 80mm wheels with sealed ABEC grade 5 bearings for quiet rolling
- User-replaceable retractable handle, wheels and feet
- Extra tall wheel housings protect your bag from scrapes and scratches
- Seam-sealed rain cover included
- Grab handles on three sides for lifting bag into the overhead bin
- Reinforced dividers support heavy gear and maintain strength over time
- Business card holder on top for identification
What Fits:
- 2 DSLRs with lenses attached plus 2–4 additional lenses, 15” laptop* and a 10” tablet
- Max Lens: 400mm f/2.8 attached (hood reversed)
- 2 Gripped DSLRs with lenses detached plus 4–6 additional lenses, 15” laptop* and a 10” tablet
*Artificial Intelligence V3.0 laptop sleeve is recommended and sold separately.
Specifications
Specifications
Internal Dimensions:
13” W x 18.5” H x 5.3– 6.8” D (33 x 47 x 13–17 cm)
Exterior Dimensions:
14” W x 21” H x 8” D (35.5 x 53 x 22 cm)
Laptop Pocket:*
11.4” W x 16.3” H x 1.4” D (29 x 41.5 x 3.6 cm)
Tablet Pocket:
9.8” W x 9.4” H x 0.8” D (25 x 24 x 2 cm)
Weight:
8.7–9.7 lbs. (3.9–4.4 kg) Depending on accessories used
*Lightly padded pocket fits a laptop in a sleeve or slim case
Materials
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 1680D ballistic nylon
- 600D polyester
- YKK® RC Fuse (abrasion-resistant) zippers
- Custom designed extra tall skid plates
- High performance 80mm super quiet wheels with sealed bearings
- SpanKodra front pocket
- Rubberized laminate reinforcement
- 320G airmesh
- Nylon webbing
- 3-ply bonded nylon thread
Interior:
- Closed cell foam and reinforced PE board dividers
- 210D silver-toned nylon
- Polyurethane backed velex liner & dividers
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Clear mesh pockets
- 3-ply bonded nylon thread
Item Includes
Think Tank Digital Holster 10 V2.0
$ 63.75 - Épuisé
Think Tank Digital Holster 10 V2.0
Think Tank SKU: 710861 | Helix SKU: TT710861
Overview
Unique holster developed for compact DSLR or small camera body with kit or small prime lens attached
Key Features:
- “Pop Down” increases bag height for a lens hood or a telephoto lens
- Shoulder bag attaches to all Think Tank belts and bags with Modular Rails
- Side attachment rail to connect small Modular or Skin component to holster
Additional Features:
- Lens hood can remain attached, reversed or in position
- Front stretch pocket for lens caps, back caps, and other items
- Removable screen protector separates your shoulder straps from your LCD
- Compatible with the Digital Holster Harness
- Inner lid pocket for SD cards or lens cloth
- Carry with the top grab-handle or the included shoulder strap
- Business card holder on top of lid
- Seam-sealed rain cover included
What Fits
- Compact DSLR
- Larger mirrorless systems
Specifications
Specifications
6.3” W x 6-8.25” H x 4” D (16 x 15.2–21 x 10 cm)
Exterior Dimensions:
6.8” W x 7.3–10.3” H x 5” D (17.1 x 18.4–26 x 12.7 cm)
Weight:
1.0 lbs (0.4 kg) With all accessories
Materials
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 600D polyester
- 420D high-density nylon
- YKK® RC Fuse (abrasion-resistant) zippers
- Ultra Stretch front pocket
- 3-ply bonded nylon thread
- 210D silver-toned nylon
- High-density extruded nylon
- Polyurethane backed velex liner
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- High-density closed cell foam
- 3-ply bonded nylon thread
Item Includes
In the Box
- Shoulder strap
- LCD screen protector
- Closed cell foam divider
- Seam-sealed rain cover
Think Tank Digital Holster 150
$ 119.75 - Épuisé
Think Tank Digital Holster 150
Think Tank SKU: 710883 | Helix SKU: TT710883
Overview
Quick access and transport for your super telephoto zoom.
With the versatility of a 150–600mm, you don’t need a backpack full of lenses for wildlife or sports photography. Instead, a camera holster dedicated to just one body with a 150–600mm attached is an ideal solution. The Digital Holster 150 is a top-loading solution that minimizes the weight and bulk of bigger bags so you can focus on the action. Wear the holster comfortably on a belt or over the shoulder, so you’re ready to shoot at a moment’s notice.
Key Features:
- Designed to form fit a 150–600mm or equivalent sized lens with body attached
- Quick access top opening
- Carry with the included shoulder strap or belt mount*
Additional Features:
- Fits a 105mm filter in its case in a zippered front pocket
- Attachment for a monopod, a small tripod or a modular component
- Rotate or Lock attachment on a Think Tank belt such as the Pro Speed Belt V3.0
- Front stretch pocket for lens caps, back caps, and other items
- Removable screen protector separates your camera strap from the LCD
- Metal hardware and YKK RC Fuse zippers for long lasting durability
- Additional divider allows you to stack smaller lenses
- Zippered side pocket for larger accessories or rain cover
- Inner lid pocket for SD cards or lens cloth
- Top grab handle for quick carry
- Business card holder on top of lid
- Seam-sealed rain cover included
What Fits:
- Holds a gripped or un-gripped camera body with up to a 12” (30.5cm) lens attached
Examples:
- Nikon D5 with 200–500mm f/5.6 VR II attached
- Canon 7D MII with Sigma 150–600mm f/5–6.3 Sport attached
Compatible Lenses:
- Sigma 150–600mm f/5–6.3 Sport or Contemporary
- Sigma 60–600mm f/4.5–6.3 Sport or Contemporary
- Tamron 150–600mm f/5–6.3
- Sony FE 200-600mm f/5.6-6.3 G
- Fujinon XF200mm F/2 R LM OIS WR
- Nikon 200–500mm f/5.6 VR
- Nikon 500mm f/5.6 VR
- Nikon 300mm f/2.8 VR
- Sigma 300mm f/2.8
- Canon 300mm f/2.8L IS II
- Canon 24–70mm f/2.8 + 16–35mm f/2.8
- Nikon 24–70mm f/2.8 + 14–24mm f/2.8
Specifications
Specifications
Exterior Dimensions:
8” W x 16” H x 8” D (20.3 x 40.6 x 20.3 cm)
Interior Dimensions:
7.3” W x 15.3” H x 7.3” D (18.4 x 39 x 18.4 cm)
Weight: (with all accessories)
1.7 lbs. (0.8 kg)
Materials
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 600D polyester
- 420D high-density nylon
- YKK® RC Fuse (abrasion-resistant) zippers
- Ultra Stretch front pocket
- 3-ply bonded nylon thread
Interior:
- 210D silver-toned nylon
- High-density extruded nylon
- Polyurethane backed velex liner
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- High-density closed cell foam
- 3-ply bonded nylon thread
Item Includes
In the Box:
- Shoulder strap
- LCD screen protector
- Closed cell foam divider
- Seam-sealed rain cover
Think Tank Digital Holster 20 V2.0
$ 76.75 - Épuisé
Think Tank Digital Holster 20 V2.0
Think Tank SKU: 710866 | Helix SKU: TT710866
Overview
Unique holster developed for standard DSLR, 24-70 f/2.8 with hood in shooting position or 70-200mm f/2.8 with hood reversed
Key Features:
- “Pop Down” increases bag height for a lens hood or a telephoto lens
- Shoulder bag attaches to all Think Tank belts and bags with Modular Rails
- Side attachment rail to connect small Modular or Skin component to holster
Additional Features:
- Lens hood can remain attached, reversed or in position
- Front stretch pocket for lens caps, back caps, and other items
- Removable screen protector separates your shoulder straps from your LCD
- Compatible with the Digital Holster Harness
- Inner lid pocket for SD cards or lens cloth
- Carry with top grab-handle or the included shoulder strap
- Business card holder on top of lid
- Seam-sealed rain cover included
What Fits:
- Standard DSLR
- 24–70 f/2.8 (hood in shooting position)
- 70-200 f/2.8 (hood reversed)
Specifications
Specifications
7.3" W x 8–11.5" H x 5" D (18.4 x 20.3–29.2 x 12.7 cm)
Exterior Dimensions:
8” W x 9.5–12.5” H X 5.5” D (20.3 x 24.1–31.8 x 14 cm)
Weight:
1.1 lbs (0.5 kg) With all accessories
Materials
- Durable water-repellant (DWR) coating
- YKK® RC Fuse (abrasion-resistant) zippers
- Ultra Stretch front pocket
- 3-ply bonded nylon thread
- 210D silver-toned nylon
- High-density extruded nylon
- Polyurethane backed velex liner
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- High-density closed cell foam
- 3-ply bonded nylon thread
Item Includes
In the Box
- Shoulder strap
- LCD screen protector
- Closed cell foam divider
- Seam-sealed rain cover
Think Tank Digital Holster 30 V2.0
$ 87.75 - Épuisé
Think Tank Digital Holster 30 V2.0
Think Tank SKU: 710871 | Helix SKU: TT710871
Overview
Unique holster developed for a regular size DSLR with a 70-200mm f/2.8 and lens hood in shooting position
Key Features:- “Pop Down” increases bag height for a lens hood or a telephoto lens
- Shoulder bag attaches to all Think Tank belts and bags with Modular Rails
- Side attachment rail to connect small Modular or Skin component to holster
Additional Features:
- Lens hood can remain attached, reversed or in position
- Front stretch pocket for lens caps, back caps, and other items
- Removable screen protector separates your shoulder straps from your LCD
- Compatible with the Digital Holster Harness
- Inner lid pocket for SD cards or lens cloth
- Carry with top grab-handle or the included shoulder strap
- Business card holder on top of lid
- Seam-sealed rain cover included
What Fits:
- Standard DSLR
- 70-200 f/2.8
Specifications
Specifications
7.3” W x 11.3-14.3" H x 5” D (18.4 x 28.6–36.2 x 12.7 cm)
Exterior Dimensions:
8” W x 13–16” H x 5.5” D (20.3 x 33–40.6 x 14 cm)
Weight:
1.2 lbs (0.6 kg)
Materials
- Durable water-repellent (DWR) coating
- Polyurethane coating
- 600D polyester
- 420D high-density nylon
- YKK® RC Fuse (abrasion-resistant) zippers
- Ultra Stretch front pocket
- 3-ply bonded nylon thread
- 210D silver-toned nylon
- High-density extruded nylon
- Polyurethane backed velex liner
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- High-density closed cell foam
- 3-ply bonded nylon thread
Item Includes
In the Box
- Shoulder strap
- LCD screen protector
- Closed cell foam divider
- Seam-sealed rain cover
Think Tank Digital Holster 40 V2.0
$ 93.75 - Épuisé
Think Tank Digital Holster 40 V2.0
Think Tank SKU: 710876 | Helix SKU: TT710876
Overview
Unique holster developed for gripped DSLR with a 24-70mm f/2.8 lens hood in shooting position
Key Features:
- “Pop Down” increases bag height for a lens hood or a telephoto lens
- Shoulder bag attaches to all Think Tank belts and bags with Modular Rails
- Side attachment rail to connect small Modular or Skin component to holster
Additional Features:
- Lens hood can remain attached; reversed or in position
- Front stretch pocket for lens caps, back caps, and other items
- Removable screen protector separates your shoulder straps from your LCD
- Compatible with the Digital Holster Harness
- Inner lid pocket for SD cards or lens cloth
- Carry with top grab-handle or the included shoulder strap
- Business card holder on top of lid
- Seam-sealed rain cover included
What Fits:
- Gripped DSLR
- 24-70 mm f/2.8
Specifications
Specifications
Interior Dimensions:
7.3” W x 8–11.5” H x 7.3” D (18.4 x 20.3–29.2 x 18.4 cm)
Exterior Dimensions:
8” W x 9.5–12.5” H x 8” D (20.3 x 24.1–31.8 x 20.3 cm)
Weight:
1.2 lbs (0.5 kg) With all accessories
Materials
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 600D polyester
- 420D high-density nylon
- YKK® RC Fuse (abrasion-resistant) zippers
- Ultra Stretch front pocket
- 3-ply bonded nylon thread
Interior:
- 210D silver-toned nylon
- High-density extruded nylon
- Polyurethane backed velex liner
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- High-density closed cell foam
- 3-ply bonded nylon thread
Item Includes
In the Box:
- Shoulder strap
- LCD screen protector
- Closed cell foam divider
- Seam-sealed rain cover
Think Tank Digital Holster 5
$ 43.75 - Épuisé
Think Tank Digital Holster 5
Think Tank SKU: 710858 | Helix SKU: TT710858
Overview
Unique holster developed specifically for small to medium mirrorless camera and a lens or a fixed lens super zoom camera
Key Features:- Designed to form-fit small–medium mirrorless bodies or a fixed lens super zoom camera
- Top opening provides quick access
- Use included shoulder strap or belt-mount on any modular compatible belts
Additional Features:
- Front stretch pocket for lens caps, back caps, and other items
- Removable screen protector separates your shoulder straps from your LCD
- Metal hardware and YKK® RC Fuse zippers for long-lasting durability
- Inner lid pocket for SD cards or lens cloth Zippered side pocket for larger accessories
- Carry with top grab-handle or the included shoulder strap Business card holder on top of lid
- Seam-sealed rain cover included
Specifications
Specifications
5.1” W x 3.5” H x 5.3” D (13 x 9 x 13.5 cm)
Exterior Dimensions:
6.3” W x 4.5” H x 6.3” D (16 x 11.5 x 16 cm)
Weight:
0.7 lbs (0.3 kg) With all accessories
Materials
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 600D polyester
- 420D high-density nylon
- YKK® RC Fuse (abrasion-resistant) zippers
- Ultra Stretch front pocket
- 3-ply bonded nylon thread
- 210D silver-toned nylon
- High-density extruded nylon
- Polyurethane backed velex liner
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- High-density closed cell foam
- 3-ply bonded nylon thread
Item Includes
In the Box
- Shoulder strap
- LCD screen protector
- Closed cell foam divider
- Seam-sealed rain cover
Think Tank Digital Holster 50 V2.0
$ 119.75 - Épuisé
Think Tank Digital Holster 50 V2.0
Think Tank SKU: 710881 | Helix SKU: TT710881
Overview
Unique holster developed for gripped DSLR, 70-200mm f/2.8 with lens hood in shooting position
Key Features:
- “Pop Down” increases bag height for a lens hood or a telephoto lens
- Shoulder bag attaches to all Think Tank belts and bags with Modular Rails
- Side attachment rail to connect small Modular or Skin component to holster
Additional Features:
- Lens hood can remain attached, reversed or in position
- Front stretch pocket for lens caps, back caps, and other items
- Removable screen protector separates your shoulder straps from your LCD
- Compatible with the Backpack Connection Kit
- Compatible with the Digital Holster Harness
- Inner lid pocket for SD cards or lens cloth
- Carry with top grab-handle or the included shoulder strap
- Business card holder on top of lid
- Seam-sealed rain cover included
What Fits:
- Gripped DSLR with 70–200 f/2.8 attached
- Gripped DSLR with Tamron 150-600 f/5.6 attached, lens hood reversed, holster popped-down
Specifications
Specifications
Interior Dimensions:
7.3” W x 11.3–14.3” H x 7.3” D (18.4 x 28.6–36.2 x 18.4 cm)
Exterior Dimensions:
8” W x 13–16” H x 8” D (20.3 x 33–44.6 x 20.3 cm)
Weight:
1.3 lbs (0.6 kg) With all accessories
Materials
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 600D polyester
- 420D high-density nylon
- YKK® RC Fuse (abrasion-resistant) zippers
- Ultra Stretch front pocket
- 3-ply bonded nylon thread
Interior:
- 210D silver-toned nylon
- High-density extruded nylon
- Polyurethane backed velex liner
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- High-density closed cell foam
- 3-ply bonded nylon thread
Item Includes
In the Box:
- Shoulder strap
- LCD screen protector
- Closed cell foam divider
- Seam-sealed rain cover
Think Tank Glass Limo
$ 249.75 - Épuisé
Think Tank Glass Limo
Think Tank SKU: 720192 | Helix SKU: TT720192
Overview
Narrow light weight backpack specifically for long lenses up to an 600mm f/4 or regular DSLR gear
Key Features:
- Accommodates large glass or a medium-large sized kit of standard zoom lenses
- Specially designed collars for long lenses
- Specially designed zippers hold their position to avoid accidental opening of the main compartment
Additional Features:
- Expand the bag's capacity by adding up to three Modular Pouches for lenses, camera bodies, water bottles, and more!
- Carry a tripod or a monopod on either side with included straps
- Deluxe organizer on front zippered pocket
- Water bottle pockets on each side
- Pro Speed Belt can be attached for additional comfort & capacity
- Seam-sealed rain cover included
What Fits:
- 600mm f/4.0 unattached
- 500mm f/4.0 with pro body attached.*
- 800mm 5.6 with aftermarket neoprene lens cap
- 300mm f/2.8 with standard DSLR attached
- 200-400mm f/4 with pro body attached
- Alternately carries a standard pro kit with pro DSLR and 5-8 lenses
- Tripod/Monopod Mount
*Please note that the padded collar is only for stabilizing 300 mm and similar size lenses. When fitting larger lenses, you must remove the padded collar as it is not needed.
Specifications
Specifications
Internal Dimensions:
8.7” W x 19.5” H x 8.3” D (22.1 × 49.5 × 21.1 cm)
Exterior Dimensions:
9” W x 21” H x 9.2” D (22.9 × 53.33 × 23.4 cm)
Weight:
2.6–3.9 lbs (1.1–1.8 kg) Depending on accessories used
Materials
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- YKK® RC Fuse (abrasion resistant) zippers
- 1680 ballistic nylon bottom panel
- 600D brushed polyester
- 420D velocity nylon
- 250D shadow rip-stop polyester
- Ultra Stretch mesh pockets
- 3D air mesh
- 3-ply bonded nylon thread
Interior:
- Belly-o mesh pockets
- 3-ply bonded nylon thread
- PE board reinforced removable closed cell velex foam dividers
- 210D silver-toned nylon
- Polyurethane-backed velex liner• belly-o mesh pockets
- 3-ply bonded nylon thread
- 2x polyurethane coated nylon 210T seam-sealed taffeta rain cover
Item Includes
In the Box:
- Tripod straps
- Reinforced padded dividers
- Foam ring
- Foam lens collar
- Seam-sealed rain cove
Think Tank Lens Changer 15 V3.0
$ 29.75 - Épuisé
Think Tank Lens Changer 15 V3.0
Think Tank SKU: 700053 | Helix SKU: TT700053
Overview
Modular lens pouch holds small lenses with the hood in shooting position, teleconverters, or prime lenses
Key Features:
- Rotate or lock components on a belt
- Wide-mouth opening for quick one-handed access
- Attaches to any Think Tank Photo Modular belt or belt pack (sold separately)
Additional Features:
- One-hand drawstring closure secures your lenses allowing you to focus on the next shot
- Outer stretch pocket provides space for a lens cap
- Smooth back finish is easy on clothing and reduces friction while rotating
- Grab handle and attachment points
- Seam-sealed rain cover included
What Fits:
- Smaller lenses such as 50mm f/1.4, 85mm f/1.8 and teleconverters
- Other lenses without the hood can fit, such as the Canon 100mm macro
Specifications
Specifications:
Internal Dimensions:
6” H x 3.3" Diameter (15.2 x 8.4 cm)
External Dimensions:
6.4" H x 3.7 Diameter (16.3 x 9.4 cm)
Weight:
0.2 lbs (0.1 kg)
Materials:
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 600D polyester
- High-density 420D nylon
- Ultra Stretch front pockets
- High-density shock cord
- Nylon webbing
- 3-ply bonded nylon thread
Interior:
- 210D silver-toned nylon
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Closed cell foam
- 3-ply bonded nylon thread
Item Includes
Seam-sealed rain cover
Think Tank Lens Changer 150 V3.0
$ 54.75 - Épuisé
Think Tank Lens Changer 150 V3.0
Think Tank SKU: 700058 | Helix SKU: TT700058
Overview
Modular pouch accommodates a 150–600mm f/5–6.3 lens with hood reversed.
Key Features:
- One-handed vertical zipper for quick access and easy retrieval
- Shoulder strap included
- “Lens Catcher” wing secures lens while working out of the case
Additional Features:
- Outer stretch pockets provide space for lens cap or accessories
- Pouch rotates or locks on a belt
- Grab handle
- Rain cover included in the bottom pocket can be put on with one hand
What Fits:
- 150–600mm f/5–6.3
- Nikon 200–500mm
Specifications
Specifications:
Internal Dimensions:
5.5” W x 12.7” H x 5.6” D (14 x 32 x 14.2 cm)
External Dimensions:
5.8” W x 13.4” H x 5.9” D (14.7 x 34 x 15 cm)
Weight:
0.8 lbs (0.4 kg)
Materials:
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 600D polyester
- 300D diamond weave polyester
- Ultra Stretch front pockets
- High-density shock cord
- Nylon webbing
- Rubberized laminate
- 3-ply bonded nylon thread
Interior:
- 200D polyester
- 2x polyurethane coated nylon 190T seam-sealed rain cover
- Closed-cell foam
- 3-ply bonded nylon thread
Item Includes
Seam-Sealed Rain Cover
Think Tank Lens Changer 25 V3.0
$ 36.75 - Épuisé
Think Tank Lens Changer 25 V3.0
Think Tank SKU: 700054 | Helix SKU: TT700054
Overview
Modular belt pouch for regular and smaller zoom lenses, medium-size prime lenses with the hood in shooting position
Key Features:
- Rotate or lock components on a belt
- Wide-mouth opening for quick one-handed access
- Attaches to any Think Tank Photo Modular belt or belt pack (sold separately)
Additional Features:
- One-hand drawstring closure secures your lenses allowing you to focus on the next shot
- Outer stretch pocket provides space for a lens cap
- Smooth back finish is easy on clothing and reduces friction while rotating
- Grab handle and attachment points
- Seam-sealed rain cover included
What Fits:
Zoom lenses, such as the 14–24mm f/2.8, 24–70mm f/4, with the lens hood attached in the reversed position
Specifications
Specifications:
Internal Dimensions:
7.0" H x 4.0" Diameter (17.78 x 10.0 cm)
External Dimensions:
7.2" H x 4.5 Diameter (18.3 x 11.4 cm)
Weight:
0.3 lbs (0.1kg)
Materials:
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 600D polyester
- High-density 420D nylon
- Ultra Stretch front pockets
- High-density shock cord
- Nylon webbing
- 3-ply bonded nylon thread
Interior:
- 210D silver-toned nylon
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Closed cell foam
- 3-ply bonded nylon thread
Item Includes
- Seam-Sealed Rain Cover
Think Tank Lens Changer 35 V3.0
$ 38.75 - Épuisé
Think Tank Lens Changer 35 V3.0
Think Tank SKU: 700055 | Helix SKU: TT700055
Overview
Modular pouch holds a 24–70mm f/2.8 lens with lens hood in shooting position, or other similar size lenses
Key Features:
- Rotate or lock components on a belt
- Wide-mouth opening for quick one-handed access
- Attaches to any Think Tank Photo Modular belt or belt pack (sold separately)
Additional Features:
- One-hand drawstring closure secures your lenses allowing you to focus on the next shot
- Outer stretch pocket provides space for a lens cap
- Smooth back finish is easy on clothing and reduces friction while rotating
- Grab handle and attachment points
- Seam-sealed rain cover included
What Fits:
- 24–70mm f/2.8 with the lens hood in the shooting position
- 100mm macro with the lens hood in the shooting position
- 105mm macro with the lens hood in the shooting position
Specifications
Specifications:
Internal Dimensions:
8.8" H x 4.3" Diameter (22.4 x 10.9 cm)
External Dimensions:
9.0" H x 4.5 Diameter (22.9 x 11.4 cm)
Weight:
0.3 lbs (0.1 kg)
Materials:
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 600D polyester
- High-density 420D nylon
- Ultra Stretch front pockets
- High-density shock cord
- Nylon webbing
- 3-ply bonded nylon thread
Interior:
- 210D silver-toned nylon
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Closed cell foam
- 3-ply bonded nylon thread
Item Includes
Seam-sealed rain cover
Think Tank Lens Changer 50 V3.0
$ 38.75 - Épuisé
Think Tank Lens Changer 50 V3.0
Think Tank SKU: 700056 | Helix SKU: TT700056
Overview
Modular pouch fits wide-angle lenses with hoods in shooting position
Key Features:
- Rotate or lock components on a belt
- Wide-mouth opening for quick one-handed access
- Attaches to any Think Tank Photo Modular belt or belt pack (sold separately)
What Fits:
- 16–35mm f/2.8 with the lens hood attached
- 17–40mm f/4.0 with the lens hood attached
Specifications
Specifications:
Internal Dimensions:
7.3" H x 4.5" Diameter (18.5 x 11.4 cm)
External Dimensions:
7.5" H x 5.0" Diameter (19 x 12.7 cm)
Weight:
0.3 lbs (0.1 kg)
Materials:
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 600D polyester
- High-density 420D nylon
- Ultra Stretch front pockets
- High-density shock cord
- Nylon webbing
- 3-ply bonded nylon thread
Interior:
- 210D silver-toned nylon
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Closed cell foam
- 3-ply bonded nylon thread
Item Includes
Seam-Sealed Rain Cover
Think Tank Lens Changer 75 Pop Down V3.0
$ 45.75 - Épuisé
Think Tank Lens Changer 75 Pop Down V3.0
Think Tank SKU: 700057 | Helix SKU: TT700057
Overview
Modular pouch accommodates a 70–200mm f/2.8 lens with hood reversed or in shooting position when popped down
Key Features:
- Pop Down feature increases bag depth to keep lens hood in the shooting position
- Wide-mouth opening for quick access
- Attaches to any Think Tank Photo belt or belt pack (sold separately)
Additional Features:
- Rotate or lock components on a belt
- One-hand drawstring closure secures your lenses while allowing you to focus on the next shot
- Outer stretch pocket provides space for a lens cap
- Smooth back finish is easy on clothing and reduces friction while rotating
- Grab handle and attachment points
- Seam-sealed rain cover included
What Fits:
- 70–200mm f/2.8 with the lens hood and tripod collar attached and lens hood in shooting position when pouch is "popped-down"
- Canon 100-400mm f/4.5-5.6 with the lens hood and tripod collar attached and lens hood in shooting position when pouch is "popped-down"
- Other similarly sized lenses
Specifications
Specifications:
Internal Dimensions:
9.5–13" H x 4.5" Diameter (24.1–33 x 11.4 cm)
External Dimensions:
11–14" H x 5.0" Diameter (27–35.6 x 12.7 cm)
Weight:
0.5 lbs (0.2 kg)
Materials:
Exterior:
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 600D polyester
- High-density 420D nylon
- Ultra Stretch front pockets
- High-density shock cord
- Nylon webbing
- 3-ply bonded nylon thread
Interior:
- 210D silver-toned nylon
- 2x polyurethane coated nylon 210T seam-sealed rain cover
- Closed cell foam
- 3-ply bonded nylon thread
Item Includes
Seam-Sealed Rain Cover
Think Tank StoryTeller 10
$ 84.75 - Épuisé
Think Tank StoryTeller 10
Think Tank SKU: 710803 | Helix SKU: TT710803
Overview
Story Telling: a picture is worth a thousand words. And whether you are a pro or amateur photographer, you need the right camera bag to help tell your story.
Key Features:
- Flip-top lid provides quick access to gear
- Designed to fit DSLR or Mirrorless equipment
- Structured for maximum capacity
Additional Features:
The StoryTeller shoulder bags fit both DSLR and Mirrorless bodies and lenses, and feature a flip-top lid for quick access. The premium quality materials used to build the StoryTeller ensures your gear stays protected at a price you can afford.
- StoryTeller 10 fits a 10” tablet in dedicated pocket
- Adjustable padded shoulder strap
- Secure closure for main compartment
- Two memory card pockets to separate empty and full cards
- Zippered pocket for valuables
- Expandable front pocket fits additional gear
- Stretchable side pocket fits a water bottle
- Premium quality materials ensure durability
- High quality YKK RC zippers
- Seam-sealed rain cover included in front pocket
What Fits:
- Fits an ungripped DSLR or Mirrorless camera body, 2‒4 standard telephoto lenses with hoods attached and reversed, and a 10” tablet.
- D750 w/ 24‒70mm f/2.8 attached, 70‒200mm f/2.8, 85mm f/1.8, and an iPad
- 60D MkII w/ 24‒70mm f/2.8 attached, 70‒200mm f/2.8, 50mm f/1.4, and a Galaxy tab 10
Specifications
Specifications
Internal Dimensions:
11” W x 9.8” H x 4.9” D (28 x 25 x 12.5 cm)
Exterior Dimensions:
12” W x 10.2” H x 6.3” D (30.5 x 26 x 16 cm)
Tablet Pocket:
9.8” x 7.9” x 0.6” (25 x 20 x 1.5cm)
Weight:
1.5lb (0.7kg)
Materials
Exterior:
- All fabric exterior treated with durable water resistant coating while fabric underside is coated with polyurethane for superior water resistance
- YKK® RC Fuse (abrasion resistant) zippers
- 600D brushed polyester
- 1680D ballistic polyester
- Rubberized Laminate
- Ultra-stretch mesh
- Nylon seatbelt webbing
- 3-ply bonded nylon thread
Interior:
- Removable closed-cell foam dividers
- 200D polyester liner
- PU backed nylex liner
- 2x PU coated poly 70D 190T seam-sealed taffeta rain cover
- 3-ply bonded nylon thread
Item Includes
- Rain Cover
Think Tank StoryTeller 5
$ 64.75 - Épuisé
Think Tank StoryTeller 5
Think Tank SKU: 710801 | Helix SKU: TT710801
Overview
Story Telling: a picture is worth a thousand words. And whether you are a pro or amateur photographer, you need the right camera bag to help tell your story.
Key Features:
- Flip-top lid provides quick access to gear
- Designed to fit DSLR or Mirrorless equipment
- Structured for maximum capacity
Additional Features:
The StoryTeller shoulder bags fit both DSLR and Mirrorless bodies and lenses, and feature a flip-top lid for quick access. The premium quality materials used to build the StoryTeller ensures your gear stays protected at a price you can afford.
- Adjustable padded shoulder strap
- Secure closure for main compartment
- Two memory card pockets to separate empty and full cards
- Zippered pocket for valuables
- Expandable front pocket fits additional gear
- Stretchable side pocket fits a water bottle
- Premium quality materials ensure durability
- High quality YKK RC zippers
- Seam-sealed rain cover included in front pocket
What Fits:
- Holds a standard DSLR or Mirrorless camera body and 2–3 small telephotos or primes with hoods attached and reversed.
- D750 with 18–300mm f/3.5–6.3 attached, an 85mm f/1.8 and an SB‒700
- 60D MkII with a 55–200mm f/4.5–5.6 attached, and a 50mm f/1.8 and a 430EX III
Specifications
Specifications
Internal Dimensions:
9.1” W x 7.3” H x 4.9” D (23 x 18.5 x 12.5 cm)
Exterior Dimensions:
9.4” W x 7.9” H x 6.3” D (24 x 20 x 16 cm)
Weight:
1.0 lb (0.5kg)
Materials
Exterior:
- All fabric exterior treated with durable water resistant coating while fabric underside is coated with polyurethane for superior water resistance
- YKK® RC Fuse (abrasion resistant) zippers
- 600D brushed polyester
- 1680D ballistic polyester
- Rubberized Laminate
- Ultra-stretch mesh
- Nylon seatbelt webbing
- 3-ply bonded nylon thread
Interior:
- Removable closed-cell foam dividers
- 200D polyester liner
- PU backed nylex liner
- 2x PU coated poly 70D 190T seam-sealed taffeta rain cover
- 3-ply bonded nylon thread
Item Includes
In the Box:
- Tripod attachment straps
- Seam-sealed rain cover included
Think Tank StoryTeller 8
$ 69.75 - Épuisé
Think Tank StoryTeller 8
Think Tank SKU: 710802 | Helix SKU: TT710802
Overview
Story Telling: a picture is worth a thousand words. And whether you are a pro or amateur photographer, you need the right camera bag to help tell your story.
Key Features:
- Flip-top lid provides quick access to gear
- Designed to fit DSLR or Mirrorless equipment
- Structured for maximum capacity
Additional Features:
he StoryTeller shoulder bags fit both DSLR and Mirrorless bodies and lenses, and feature a flip-top lid for quick access. The premium quality materials used to build the StoryTeller ensures your gear stays protected at a price you can afford.
- StoryTeller 8 fits an 8” tablet in front pocket
- Adjustable padded shoulder strap
- Secure closure for main compartment
- Two memory card pockets to separate empty and full cards
- Zippered pocket for valuables
- Expandable front pocket fits additional gear
- Stretchable side pocket fits a water bottle
- Premium quality materials ensure durability
- High quality YKK RC zippers
- Seam-sealed rain cover included in front pocket
What Fits:
- Holds a standard DSLR or Mirrorless camera body, 3–4 small telephotos or primes with hoods attached and reversed, and an 8” tablet.
- D750 with a 18–300mm f/3.5–6.3 attached, 105mm macro, 85mm f/1.8, and an iPad Mini
- 60D MkII with a 55–200mm f/4.5–5.6 attached, 100mm macro, 50mm f/1.8, and a Galaxy Tab 8
Specifications
Specifications
Internal Dimensions:
11” W x 7.5” H x 4.9” D (28 x 19 x 12.5 cm)
Exterior Dimensions:
11.8” W x 8.3” H x 6.3” D (30 x 21 x 16 cm)
Weight:
1.3lb (0.6kg)
Materials
Exterior:
- All fabric exterior treated with durable water resistant coating while fabric underside is coated with polyurethane for superior water resistance
- YKK® RC Fuse (abrasion resistant) zippers
- 600D brushed polyester
- 1680D ballistic polyester
- Rubberized Laminate
- Ultra-stretch mesh
- Nylon seatbelt webbing
- 3-ply bonded nylon thread
Interior:
- Removable closed-cell foam dividers
- 200D polyester liner
- PU backed nylex liner
- 2x PU coated poly 70D 190T seam-sealed taffeta rain cover
- 3-ply bonded nylon thread
Item Includes
- Rain Cover
