Atomos Accessory Kit
$ 295.00
Atomos Accessory Kit
Atomos SKU: ATOMACCKT1 | Helix SKU: ATOMACCKT1
Overview
Full accessory kit to add to purchases of Ninja Inferno (Travel Case) ATOMNJAIN1 or Shogun Flame (Travel Case) ATOMSHGFL2
Full Accessory Kit includes: HPRC hard flight case Control cable 2 x 5200mAh battery Fast charger usb docking station DC to D-Tap cable 4x Master Caddy II Cases Power Supply HDR Sunhood
Atomos AtomX GigE/NDI - Modular Expansion for Ninja V
$ 195.00
Atomos AtomX GigE/NDI - Modular Expansion for Ninja V
Atomos SKU: ATOMXGIGE1 | Helix SKU: ATOMXGIGE1
Overview
Modularity is at the heart of the Ninja V with a bi-directional high speed expansion port breaking out connectivity for I/O of video, audio and power. Atomos created AtomX to ensure users could adapt and connect to any legacy or future wireless or wired video standard.
The AtomX Ethernet/NDI module has a wired ethernet (1 GigE) connector that makes it possible to deliver live broadcast-grade video over IP networks. Newtek’s NDI technology harnesses this - allowing for simple installation and control of multi-camera networks, replacing traditional SDI cabling. The AtomX Ethernet/NDI module has NDI input and output with encode, decode, control and sync, allowing Ninja V users to transmit, distribute or receive and monitor NDI from any NDI source. Simply power on the Ninja V with AtomX Ethernet/NDI module installed, plug in your network cable, and your source will be automatically discovered on the NDI network ready for production.
The beauty of licensing technology from Newtek and Timecode Systems is that all their products are fully compatible with the relevant AtomX modules – so large and small productions currently using NDI’s or Timecode Systems’ class leading products can effortlessly integrate Atomos devices. The simplest application with Newtek is integration with their famous TriCaster products.
For Timecode systems the most basic use case is to sync a mirrorless camera to an appropriately equipped audio device for perfect automated sync sound – a huge benefit for anyone from vloggers through to broadcasters and Hollywood productions.
Specifications
| In/Outs | HDMI/1GigE |
| Ethernet | 1Gb/s |
| HDMI 2.0 |
4Kp60
|
| Channels |
6+
|
| Channels over 10G | 100 |
| Encode/Decode | NDI HDp60 |
| Latency | < 30ms |
Atomos AtomX SSDmini Handle
$ 29.00
Atomos AtomX SSDmini Handle
Atomos SKU: ATOMXSSDH1 | Helix SKU: ATOMXSSDH1
Overview
Atomos AtomX SSDmini Handle
Atomos AtomX Sync - Modular Expansion for Ninja V
$ 149.00
Atomos AtomX Sync - Modular Expansion for Ninja V
Atomos SKU: ATOMXSYNC1 | Helix SKU: ATOMXSYNC1
Overview
Modularity is at the heart of the Ninja V with a bi-directional high speed expansion port breaking out connectivity for I/O of video, audio and power. Atomos created AtomX to ensure users could adapt and connect to any legacy or future wireless or wired video standard.
The AtomX Sync module brings professional wireless timecode and sync plus Bluetooth control to Ninja V, perfect for enhancing DSLRs, mirrorless cameras or game recordings. You can sync and/or control literally thousands of Ninja V units equipped with AtomX Sync modules on the same network at ranges of up to 300m. Multi-cam shoots have never been so easy. AtomX modules bring broadcast level standards to any HDMI camera or source, making it easy to integrate large sensor consumer cameras easily into traditional live productions. AtomX Sync has a built-in battery extender that allows for continuous power when swapping batteries, ensuring uninterrupted operation of the Ninja V during a shoot.
The beauty of licensing technology from Newtek and Timecode Systems is that all their products are fully compatible with the relevant AtomX modules – so large and small productions currently using NDI’s or Timecode Systems’ class leading products can effortlessly integrate Atomos devices. The simplest application with Newtek is integration with their famous TriCaster products.
For Timecode systems the most basic use case is to sync a mirrorless camera to an appropriately equipped audio device for perfect automated sync sound – a huge benefit for anyone from vloggers through to broadcasters and Hollywood productions.
Specifications
| Range | 300m |
| Frequency | 1GHz/Bluetooth |
| Sync | Timecode |
| Frame Rate | 60p, HD/4K |
| Control | Master/slave |
| Networked Devices | 1000+ |
| Continuous Power | 7 mins |
Atomos AtomX Tilt Sumo
$ 149.00
Atomos AtomX Tilt Sumo
Atomos SKU: ATOMX19TLT | Helix SKU: ATOMX19TLT
Overview
Tilt for Sumo feet.
Atomos Coiled Mini to Full HDMI - 30cm
$ 22.95 - Sold Out
Atomos Coiled Mini to Full HDMI - 30cm
Atomos SKU: ATOMCAB008 | Helix SKU: ATOMCAB008
Overview
Atomos Coiled Mini to Full HDMI - 30cm
Atomos Sumo screen protector
$ 49.00
Atomos Sumo screen protector
Atomos SKU: ATOMLCDP02 | Helix SKU: ATOMLCDP02
Overview
Atomos Sumo screen protector
Atomos Sunhood for 19” Product
$ 195.00
Atomos Sunhood for 19” Product
Atomos SKU: ATOM19SUN1 | Helix SKU: ATOM19SUN1
Overview
Atomos Sunhood for 19” Product
Atomos Sunhood for Ninja V
$ 89.00
Atomos Sunhood for Ninja V
Atomos SKU: ATOMSUN007 | Helix SKU: ATOMSUN007
Overview
Sunhood for Atomos Ninja V
Atomos USB-C 3.1 Docking Station
$ 59.95
Atomos USB-C 3.1 Docking Station
Atomos SKU: ATOMDCK004 | Helix SKU: ATOMDCK004
Overview
Dock SSD/HDD to Mac/PC
Benro PH-08 Extra Snap-In QR Plate with 1/4-20 Thread for Model BH-0-M BallHeads, HD-18M PanHeads and DJ-80 TiltHeads
$ 14.00
Benro PH-08 Extra Snap-In QR Plate with 1/4-20 Thread for Model BH-0-M BallHeads, HD-18M PanHeads and DJ-80 TiltHeads
Delkin Devices Pop-Up Shade - 3.0"
$ 9.95 - Sold Out
Delkin Devices Pop-Up Shade - 3.0" - DDDU30M
- The Delkin Pop-Up Shade is designed to fit cameras with 3.0" LCD screens.
- Attaches to your camera by a non-residue adhesive.
- The adhesive does not damage the camera when the shade is removed, nor does it leave behind any film.
- An optically clear plastic protects your camera's screen, and the simple pop-up design allows for easy opening to block the glare.
- The two-part design enables easy removal of the shade while keeping the clear plastic in place for protection.
Dinkum 1/4" to 3/8" Adaptor Screw
$ 5.95
Make your device do double duty with the Dinkum 1/4" to 3/8" Adaptor Screw. It allows conversion from a camera mounting device to a microphone shock mount.
Dinkum Systems 3228 2" Clamping Top for Adjustable Arms
$ 22.45
Turn your camera mount or lens shade into a super strong, ultra useful clamp-to-clamp device. The Dinkum 2" clamp will securely grip to C-Stands, foam core and table top items for countless on-set uses, holding devices like audio-video receivers, video tr
Dinkum Systems Fixed Base Mount, 1/4-20"
$ 22.45
Simply screw the Dinkum 1/4-20" Fixed Base Mount to a carrying handle or accessory block of most film or video cameras and affix your lens shade or accessory to it. Keep the fixed base mount on your camera's handle at all times and snap the flag off at th
Dinkum Systems Fixed Base Mount, 3/8-16"
$ 22.45
Dinkum Systems Fixed Base Mount, 3/8-16"
Simply screw the Dinkum 3/8-16" Fixed Base Mount to a carrying handle or accessory block of most film or video cameras and affix your lens shade or accessory to it. Keep the Fixed Base Mount on your cameras handle at all times and snap the flag off at the
Dinkum Systems FlexiMount
$ 49.95
The Dinkum Systems FlexiMount is a perfect device for the fast set-up required by roadies, documentary filmmakers, audio engineers or on-the-go podcasters. The FlexiMount attaches easily to surfaces such as tables, C-stands, lighting grids and drum kits.
Dinkum Systems FlexiMount Top, 3/8-16" Thread
$ 13.45
Make your device do double duty with the Dinkum FlexiMount Top. It allows conversion from the lens shade to a mounting device, attaching to a standard 3/8 -16" microphone shock mount.
Dinkum Systems Screw Mount, 1/4-20"
$ 13.45
Simply screw the Dinkum 1/4-20" Screw Mount to the handle or accessory block of most film or video cameras or to a mini-Cardellini clamp and fix your lens shade or accessory to it.
Dot Line DLC Handlebar / Seat Post Pole Mount for GoPro Cameras
$ 11.95
Dot Line DLC Handlebar / Seat Post Pole Mount for GoPro Cameras
Dot Line SKU: DL-1206 | Helix SKU: DL1206
Overview
The DLC Handlebar/Seat post Pole Mount for Go Pro Cameras allows all the
current GoPro cameras on the market today to be mounted on to a
handlebar or seat post. The maximum post size is 1-5/8" (4cm). Included
is 1 short and 1 long extension arm as well as 1 short and 1 long
locking screw.
Dot Line DLC Roll Bar Mount for GoPro Cameras
$ 17.95
Dot Line DLC Roll Bar Mount for GoPro Cameras
Dot Line SKU: DL-1207 | Helix SKU: DL1207
Overview
The new DLC Roll Bar Mount for GoPro Cameras is designed for motorbikes. The clamp opens up to 2-1/2". It features friction pads to provide for a secure mount and has an open slot design on one side to enable easy mounting to the roll bar. Complete with thumb screw knob. Designed to accept all current GoPro Hero cameras on the market today.
Dot Line Tripod Adapter for Go Pro - DL-1200
$ 5.95
Dot Line Tripod Adapter for Go Pro - DL-1200
Dot Line SKU: DL-1200 | Helix SKU: DL1200
Overview
Adapts the GoPro® camera to fit on to a standard 1/4-20 post of a tripod or monopod.
Gitzo GC5210 Tripod Shoulder Strap
$ 38.05
Gitzo GC5210 Tripod Shoulder Strap - GZGC5210
The strap is made of neoprene and rubberized textile with a thermoformed structure. Its connection system is designed to fit Gitzo tripods such as the Mountaineer, and is fully adjustable and can be left on the tripod. The GC5210 includes a neoprene pocket for small accessories or a cell phone.
Specifications
 |
Weight | N/A |
| Color | Black | |
| Type of Bag | Carrying Solution | |
| Types of Gear | Support |
Kirk BL-D300 Compact L-Bracket for Nikon D300 & D300s
$ 129.95 - Sold Out
Kirk BL-D300 Compact L-Bracket for Nikon D300 & D300s - KPBLD300
- Weight: 3.7 ounces
- Finish: Black Anodize
- Material: 6061-T6 aluminum
- Additional Mounting Hole: (1) 1/4-20
- Sensor Centering Lines: Yes
- Hand Strap Loop: Yes
- Mounting Screw: Captive 1/4-20 stainless
- One piece design: Yes
- Hex Wrench: Included
- Mount: Arca-Swiss
Kirk BL-D7000 Compact L-Bracket for Nikon D7000
$ 129.95 - Sold Out
Kirk BL-D7000 Compact L-Bracket for Nikon D7000 - KPBLD7000
FEATURES
- Weight: 3.5 ounces
- Finish: Black Anodize
- Material: 6061-T6 aluminum
- One piece Design: Yes
- Additional Mounting Hole: (1) 1/4-20
- Sensor Centering Lines: Yes
- Hand Strap Loop: Yes
- Mounting Screw: Captive 1/4-20 stainless
- Slotted Design for Additional Side Port Access: Yes
- Hex Wrench: Included
- Mount: Arca-Swiss
Kirk BL-D90 Compact L-Bracket for Nikon D80 & D90
$ 129.95 - Sold Out
Kirk BL-D90 Compact L-Bracket for Nikon D80 & D90 - KPBLD90
The Kirk BL-D90 Compact L-Bracket is an ultra-compact and lightweight L-bracket that is custom designed to snugly fit a Nikon D80 & D90 camera body. Machined from one single piece of 6061T6 industrial strength aluminum, it provides full access to all switches, sockets, and the battery drawer. This design allows you to release, turn, and remount your camera in mere seconds, when switching from horizontal to vertical orientation and back. It is especially ideal for use with shorter macro, wide-angle, and tilt-shift lenses. For use with quick release systems that use the Arca Swiss type clamp. Features accessory mount for hand strap.
Kirk LP-38 Lens Plate for Nikon
$ 54.95
Kirk LP-38 Lens Plate for Nikon - KPLP38
Compatible With:
- Nikon AF-S 300mm f/4
- Nikon AF-S 80-400mm f4.5-5.6 VR
Kirk LP-47 Replacement Nikon Lens Foot
$ 89.95 - Sold Out
Kirk LP-47 Replacement Lens Foot for Nikon - KPLP47
Kirk Tripod Foot Compatible With:
- Nikon AF-S 200-400mm f4 G ED VR
- Nikon AF-S 300mm f2.8 G ED VR
- Nikon AF-S 300mm f2.8 G ED VR II
- Nikon AF-S 500mm f4 G ED VR
- Nikon AF-S 500mm f4 G ED VR II
MeFOTO Compass Knob for WalkAbout Monopod, Red
$ 20.00
MeFOTO Compass Knob for WalkAbout Monopod, Red
This red MeFoto Compass Knob is included with the WalkAbout monopod, and is sold here as a spare or replacement part. It screws into the top plate and acts as a knob, allowing you to use the monopod as a walking stick. A compass in the knob helps you find your way should you get lost while on a hike.
Mefoto Roadtrip Carbon Fiber Tripod Kit
$ 299.00
Mefoto Roadtrip Carbon Fiber Tripod Kit
Mefoto Smart Phone Holder with Camera Support
$ 49.00
Mefoto Smart Phone Holder with Camera Support
MindShift Rotation180° Panorama 22L - Charcoal
$ 199.99
MindShift rotation180° Panorama 22L Charcoal- MS220
There's no need to disrupt your creative momentum by removing this backpack to access your camera equipment. No more “on again, off again” with the rotation180° Panorama. Simply pull around the integrated beltpack to rapidly access your gear. The intuitive design lets you put on the pack and forget about it, yet everything is right there when you need it. Compact and lightweight, it holds your essential photo gear, as well as a tripod, clothing, your lunch and more.
Product Features:
Beltpack interior with camera, extra lens, 10" tablet, binoculars plus room for other small items 
Panorama backpack with beltpack fully rotated
Dedicated hydration pocket holds up to a 2 liter reservoir (may hold some larger reservoirs) 
Seam-sealed rain cover functions with rotation technology, for extra protection in heavy downpours 
Carry a tripod fully secured on the front of the Panorama backpack
Additional room for jacket, 1-2 layers, hat, gloves, lunch, etc.
Top pocket for quick access to small items 
Attachment points for Tripod Suspension Kit*
Additional Features:
- Rotating beltpack for rapid access to trail essentials: Camera, iPad, maps, binoculars, etc.
- 3 tripod-carrying options
- Lightweight, only 2.9 lbs
- Side pocket for keeping small necessities handy
- Additional room for jacket, 1-2 layers, hat, gloves, lunch, etc.
- Removable beltpack can be worn separately for shorter outings
- Load-lifter adjustable straps on both the beltpack and shoulder harness
- Breathable padded airflow harness with daisy chain
- Curved back panel with single aluminum stay for pack stability
- Modular rail to attach a Lens Switch Case* or Filter Hive*
- Attachment points for Tripod Suspension Kit*
- Panorama Photo Insert fits in the top portion of pack and provides extra carrying capacity for photo gear
- 2 seam-sealed Rain Covers* function with the rotation design for extra protection in heavy downpours
* items sold separately
Specifications
Dimensions
Backpack exterior:
9.8” W x 19.7” H x 8.3” L
(25 x 50 x 21 cm)
Beltpack interior:
9.4” W x 7.5” H x 4.7” L
(24 x 19 x 12 cm)
Beltpack exterior:
9.8” W x 8.2” H x 5.1” L
(25 x 22 x 13 cm)
Weight
Backpack
2.0 lbs (0.9 kg)
Beltpack
0.9 lbs (0.4 kg)
Total
2.9bs (1.3 kg)
Volume
Backpack:
1013 cubic inches or 16.6 liters
Beltpack:
329 cubic inches or 5.4 liters
Total:
1342 cubic inches or 22 liters
Materials
Exterior: For superior water resistance, all exterior fabric has a durable water-repellant coating, plus the underside of the fabric has a polyurethane coating. It also has YKK® zippers, 420D velocity nylon, 420D high density nylon, 210D velocity nylon, Ultra-Stretch fabric, 350G air-mesh, 3-ply bonded nylon thread.
Interior: 200D polyester lining, belly-o mesh pockets, closed-cell antilon foam, 3-ply bonded nylon thread.
MindShift Rotation180° Panorama 22L - Tahoe Blue
$ 199.99
MindShift rotation180° Panorama 22L Tahoe Blue- MS221
There's no need to disrupt your creative momentum by removing this backpack to access your camera equipment. No more “on again, off again” with the rotation180° Panorama. Simply pull around the integrated beltpack to rapidly access your gear. The intuitive design lets you put on the pack and forget about it, yet everything is right there when you need it. Compact and lightweight, it holds your essential photo gear, as well as a tripod, clothing, your lunch and more.
Product Features:
Beltpack interior with camera, extra lens, 10" tablet, binoculars plus room for other small items
Panorama backpack with beltpack fully rotated
Dedicated hydration pocket holds up to a 2 liter reservoir (may hold some larger reservoirs)
Seam-sealed rain cover functions with rotation technology, for extra protection in heavy downpours
Carry a tripod fully secured on the front of the Panorama backpack
Additional room for jacket, 1-2 layers, hat, gloves, lunch, etc.
Top pocket for quick access to small items
Attachment points for Tripod Suspension Kit*
Additional Features:
- Rotating beltpack for rapid access to trail essentials: Camera, iPad, maps, binoculars, etc.
- 3 tripod-carrying options
- Lightweight, only 2.9 lbs
- Side pocket for keeping small necessities handy
- Additional room for jacket, 1-2 layers, hat, gloves, lunch, etc.
- Removable beltpack can be worn separately for shorter outings
- Load-lifter adjustable straps on both the beltpack and shoulder harness
- Breathable padded airflow harness with daisy chain
- Curved back panel with single aluminum stay for pack stability
- Modular rail to attach a Lens Switch Case* or Filter Hive*
- Attachment points for Tripod Suspension Kit*
- Panorama Photo Insert fits in the top portion of pack and provides extra carrying capacity for photo gear
- 2 seam-sealed Rain Covers* function with the rotation design for extra protection in heavy downpours
* items sold separately
Specifications
Dimensions
Backpack exterior:
9.8” W x 19.7” H x 8.3” L
(25 x 50 x 21 cm)
Beltpack interior:
9.4” W x 7.5” H x 4.7” L
(24 x 19 x 12 cm)
Beltpack exterior:
9.8” W x 8.2” H x 5.1” L
(25 x 22 x 13 cm)
Weight
Backpack
2.0 lbs (0.9 kg)
Beltpack
0.9 lbs (0.4 kg)
Total
2.9bs (1.3 kg)
Volume
Backpack:
1013 cubic inches or 16.6 liters
Beltpack:
329 cubic inches or 5.4 liters
Total:
1342 cubic inches or 22 liters
Materials
Exterior: For superior water resistance, all exterior fabric has a durable water-repellant coating, plus the underside of the fabric has a polyurethane coating. It also has YKK® zippers, 420D velocity nylon, 420D high density nylon, 210D velocity nylon, Ultra-Stretch fabric, 350G air-mesh, 3-ply bonded nylon thread.
Interior: 200D polyester lining, belly-o mesh pockets, closed-cell antilon foam, 3-ply bonded nylon thread.
MindShift Rotation180° Pro Bundled Accessories Kit
$ 139.99
MindShift rotation180° Pro Bundled Accessories Kit - MS205
Turn your rotation180° Professional into a Professional Deluxe with this kit! It includes Attachment Straps, Padded Photo Insert, Top Pocket, and Tripod Suspension Kit.
The bundled accessories kit will turn your rotation 180° Professional into the Deluxe version. Plus, you’ll save money rather than buying the accessories individually! Over $155 value!
Includes:
- Top Pocket adds 200c cubic inches of volume
- Attachment straps expand capacity by attaching items to outside of pack
- Padded photo insert more than doubles camera gear carrying capacity
- Tripod Suspension Kit allows hands free mobility, instant accessibility to tripod
MindShift rotation180º Panorama Rain Cover
$ 19.99
MindShift rotation180º Panorama Rain Cover - MS823
Don't let bad weather catch you by surprise. Safeguard your camera equipment with this water-resistant rain cover. The custom-design fits over the rotation180° Panorama backpack, with a slot to go over tripod legs without removal. Plus, you can rotate the Panorama's beltpack with its own rain cover in place for extra protection. Both seam-sealed rain covers roll up and stow into a single pouch so you're always prepared.
Product Features
- Includes separate rain covers for the backpack and beltpack
- Tripod can be mounted with rain cover in place
- Beltpack will rotate with both rain covers on
- Both covers fold into a single storage pouch
Weight
3.6 oz (102 g)
Materials
- Durable water-repellant (DWR) coating
- Polyurethane coating
- 70D seam-sealed taffeta
- 3-ply bonded nylon thread
MindShift Tripod Suspension Kit
$ 47.50
MindShift Tripod Suspension Kit - MS900
Nikon 10X Jewelry 6947
$ 99.95
Nikon 10X Jewelry 6947
- Air-tight retractable lens is ideal for professional tasks requiring outstanding resolution.
Nikon BM-8 LCD Cover for D300 & D300s
$ 12.95 - Sold Out
Nikon BM-8 LCD Cover for D300 & D300s - NK25357
Compatible With:
- Nikon D300 DSLR
- Nikon D300s DSLR
Nikon EP-5 Power Supply Connector
$ 39.95 - Sold Out
Nikon EP-5 Power Supply Connector
Nikon SKU: 25354 | Helix SKU: NK25354
Overview
Nikon KeyMission Accessory Pack
$ 79.95
Nikon KeyMission Accessory Pack
Nikon SKU: 13508 | Helix SKU: NK13508
Overview
The KeyMission Accessory Pack features all of the accessories you need to get your Mission started. Designed for use with the KeyMission 360 or KeyMission 170 cameras. The Pack includes the KeyMission system case to hold your camera and accessories, an extra EN-EL12 Lithium-ion battery, KeyMission Tripod and KeyMission Extension Arm.
Specifications
Dimensions (W x H x D): Approx. 6.5 x 10.5 x 3.75 in. (165.1 x 266.7 x 95.25 mm)
Weight: Approx. 1.4 lbs. (635 g)
Nikon MC-35 GPS Adapter Cord
$ 89.95 - Sold Out
Nikon MC-35 GPS Adapter Cord
Nikon SKU: 25314 | Helix SKU: NK25314
Overview
Nikon Nikon EP-5B Power Supply Connector
$ 48.00
Nikon Nikon EP-5B Power Supply Connector
Nikon SKU: EP-5B | Helix SKU: NK27014
Overview
The Nikon EP-5B Power Supply Connector for Select Nikon Cameras lets you power select Nikon DSLR and COOLPIX cameras from the EH-5A or EH-5B power supply and that way save battery power. This connector will come in handy when the camera is being used indoors for extended periods use such as for studio sessions, when uploading files to a PC, or when playing back media on a TV.
Compatible with the Nikon D7000, D7100, D7200, D600, D610, D750, D800, D800E, D810, D810A, 1 V1
Nikon PD-10 Wireless Printer Adapter for P1 & P2 Cameras (for Wifi Capability)
$ 9.95
Enables wireless printing from select COOLPIX digital cameras to any PictBridge-enabled printer. The adapter can be connected to the printer's USB port. Requires two AA batteries (supplied).
Compatible with:
- COOLPIX P1
- P2
- P3
- S6
