RØDE NT2000 Variable Pattern Studio Condenser Microphone
$ 599.00 - Vendido
RØDE NT2000 Variable Pattern Studio Condenser Microphone
RØDE SKU: NT2000 | Helix SKU: RMNT2000
Overview
Seamlessly variable dual 1" condenser microphone featuring continually variable polar pattern (omni through cardioid to figure 8), HPF and PAD.
- Large 1” HF1 gold sputtered capsule
- Continuously variable polar pattern, from Omni to Cardioid to Figure 8 controlled on the mic
- Continuously variable PAD and High-Pass Filter
- Ultra low noise, transformerless surface mount circuitry
- Wide dynamic range
- High strength welded and heat treated steel mesh head
- Internal capsule shock mounting
- Includes SM2 shock mount and RC1 case
- 10 year extended warranty when you register your microphone
The RØDE NT2000 microphone is a studio-quality large diaphragm condenser with seamlessly variable polar patterns. Its polar patterns selection, filter and pad are conveniently located on the front of the microphone body for ease of use.
Audiophile quality surface-mount electronics combined with a gold-sputtered dual 1" capsule provide extremely low self-noise (7dBA) and a maximum SPL of 147 dB (up to 157 dB with pad fully engaged) giving an incredible amount of versatility and ensuring exceptional results.
The RØDE NT2000 microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.
Specifications
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 1.00" |
| Polar Pattern |
 
Figure 8 - picks up from the front and rear and rejects sides
|
| Address Type | Side |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 200Ω |
| Maximum SPL | 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 15.0mV |
| Sensitivity | -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 7dB-A |
| Power Options |
 
|
| Weight | 831.00gm |
| Dimensions | 208.00mmH x 55.00mmW x 55.00mmD |
| Output |  |
| Warranty | 1 year with free extension to 10 years following registration |
Saramonic 96-Channel Bodypack Transmitter Unit - TX9 (UwMic9 Lavalier Microphone)
$ 129.00 - Vendido
Saramonic 96-Channel Bodypack Transmitter Unit - TX9 (UwMic9 Lavalier Microphone)
MFR SKU: UWMIC9TX9 | Helix SKU: SRUWMIC9TX9
Overview
The Saramonic TX9 is a wireless UHF bodypack transmitter and clip-on lavalier microphone bundle that provide stellar, broadcast-quality sound and are fully compatible with the dual-channel UwMic9 RX9 receiver (sold separately). The TX9 works right out of the box and is extremely easy to use. It’s ideal for DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. The TX9 features sturdy metal construction and delivers excellent sound quality in a low-cost package. It’s ultra-compact, lightweight, and easy to bring with you on every shoot.
The TX9 syncs with the RX9 receiver (sold separately) wirelessly through easy-to-use infrared sensors. The easy-to-read backlit LCD display lets you make quick adjustments to the intuitive menus in the brightest or darkest environments. The transmitter can be muted with the press of a button to give the person wearing it complete privacy, and the buttons can be “locked” when in use to prevent accidental muting or powering off.
This transmitter can be used with line-level audio, such as an output from a mixer. This can be useful at weddings and other events where you need to wirelessly transmit crystal-clear audio from a soundboard. The RF power output of the TX9 transmitter is also selectable. The “Low” setting lets you extend battery life in situations where the subject is close to the receiver. Medium and High are useful when the subject is going to be further away, or when you’re using the TX9 in an environment with more potential interference.
The included SR-M1 clip-on lavalier microphone features an omnidirectional pickup pattern that’sideal for use in video production because it captures sound equally no matter what direction it’s pointing when clipped to clothing.The microphone was designed to capture rich, crystal-clear sound and the transmitter features a locking BMP-type 1/8" (3.5mm) mic input to prevent the micfrom accidentally being unplugged. The UwMic9 TX9 is a high-quality transmitter with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Broadcast-quality UHF wireless beltpack transmitter and lavalier microphone for the RX9 dual receiver (sold separately)
- Works right out of the box with easy plug-and-play operation, lavalier mic, mic clip, foam windscreen, and belt clip are all included
- Professional SR-M1 omnidirectional lavalier microphone provides natural sound that’s ideal for video production
- Durable all-metal construction with easy-to-read backlit LCD display and easy-to-use menus and controls
- Offers up to 330-foot (100m) operating distance with infrared that makes it easy to sync channels with receiver
Specifications:
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking 1/8” (3.5mm) TRS mini-jack
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 6.73 x 2.5 x 1.18” (170.9 x 63.5 x 30.0mm)
Weight: 7.46 oz (211.4g) (without batteries)
In The Box:
1 x TX9 belt-pack transmitter
1 x SR-M1 omnidirectional lavalier mic
1 x Alligator-style lavalier mic clip
1 x Fitted foam windscreen
1 x Belt clip
1 x SR-UMBC1 battery compartment
1 x Printed user manual
1 x Warranty card
Optional Accessories (Sold Separately):
- LM-WS Fur Windjammer for SR-M1 Lavalier 3-Pack
- SR-LMWS3 Replacement Foam Windscreens 3-Pack
- WM4C-MC1 Replacement Mic Clip
- SR-UMBC1 Replacement Battery Compartment
- SR-XM1 Swiveling Omnidirectional Condenser Microphone
- SR-UM10-MC2 Replacement Belt Clip
- SR-UM10-M1 Replacement SR-M1 Lavalier
- SR-RX9 UwMic9 Dual-Channel Camera-Mountable Receiver
Saramonic Blink 500 B2 Ultracompact 2-Person Wireless Clip-On Mic System with Lavaliers & Dual Receiver
$ 199.00 - Vendido
Saramonic Blink 500 B2 Ultracompact 2-Person Wireless Clip-On Mic System with Lavaliers & Dual Receiver
MFR SKU: BLINK500B2 | Helix SKU: SRBLINK500B2
Overview
If you want an extremely small, feather-weight wireless microphone system that delivers broadcast-quality sound to use with cameras and mobile devices, with the ability to handle two wireless transmitters so you can put mics on two separate people, nothing is capable of doing this except for the Saramonic Blink 500 B2. It comes with two clip-on wireless transmitters that have built-in mics, two professional lavalier microphones, and a dual-channel receiver that mounts to the shoe of your camera. You can put mics on two separate people, and it will work perfectly with the included ultracompact dual receiver.
Tiny body, huge sound.
The Blink 500 B2 is impossibly compact and lightweight, yet it delivers crystal-clear professional sound quality. The versatile transmitters feature excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. They also operate as traditional bodypack transmitters with the included SR-M1 professional omnidirectional clip-on lavalier microphones, providing even more professional and inconspicuous miking solutions.
So advanced it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B2 is so technically advanced that it couldn't be easier to use. You just turn it on, and it works. But behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitters with the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and intelligent LED displays that show you where they're set. The internal Lithium batteries get 5 hours of life from a charge with the included charging cables, and the USB-C ports can be used to power or recharge the units in the field with portable USB battery packs. The 10-milliwatt power of the transmitters gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
Loves cameras & mobile devices equally.
Both TRS and TRRS output cables are included so the system will work perfectly with DSLR, mirrorless, and other kinds of cameras, as well as smartphones and tablets that have headphone jacks. The output of the receiver provides a strong, noise-free level, so when you plug it in you can adjust the input level of your camera to its lowest setting to avoid hearing the noisy preamp of your camera.
An ideal wireless system.
Portable, compact wireless microphone systems are completely essential tools for anyone who shoots video, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use 2-person wireless system that won't slow them down. It's small enough to tuck away into any camera bag, backpack or even your pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Specifications:
Transmitter Specifications:
Frequency: 2.4GHz
Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
RF Output Power: 10 mW
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
Microphone: Built-In Pressure Operated Electret Condenser
Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
Mounting Clip: Built-In
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Weight: 1.2 oz (34g)
Receiver Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-In 1/4λ Wire Antenna
Buttons: On / Off / Pair
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C
Output: 1/8' 3.5mm Jack (Headphone Compatible)
Audio Output Level: 5dB
Indicator: 1 LED, Blue. Flashing quickly: Paring, Flashing: Not Paired with any TX, Solid Blue: Paired with TX
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.4 x 1.3 x .61” (62 x 33 x 15mm)
Weight: 1.09 oz (31g)
Saramonic Blink 500 B3 Wireless Clip-On Mic System with Lavalier & Dual Lightning Receiver for iPhone & iPad
$ 169.00 - Vendido
Saramonic Blink 500 B3 Wireless Clip-On Mic System with Lavalier & Dual Lightning Receiver for iPhone & iPad
MFR SKU: BLINK500B3 | Helix SKU: SRBLINK500B3
Overview
The Saramonic Blink 500 B3 is an incredibly compact, lightweight, and professional sounding wireless microphone systems for the Apple iPhone and iPad. The included clip-on transmitter is small enough to clip directly to your shirt collar, and the included RXDi MFi Certified Lighting dual-channel receiver is so lightweight and unobtrusive that it won't get in your way at all. It can easily be used on devices that are mounted in handheld gimbals, and the receiver is even capable of accepting the signal from two microphones if you add another Blink 500 TX transmitter (sold separately).
Tiny body, huge sound.
The Blink 500 B3 is impossibly compact and lightweight, yet it delivers crystal-clear professional sound quality. The versatile transmitter features an excellent sounding built-in microphone that captures voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. It also operates as a traditional bodypack transmitter with the included SR-M1 professional omnidirectional clip-on lavalier microphone, providing an even more professional and visually discreet miking solution. The sleek, featherweight RXDi receiver plugs directly into the Lightning port of your Apple device and doesn't require any batteries or charging to operate. There are no controls to fuss with, either. You just plug it in, and it works.
So advanced, it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B3 is so technically advanced that it couldn't be easier to use. Even though there are no controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitter to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background with the Blink 500, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The transmitter's internal Lithium battery gets 5 hours of life from a charge with the included charging cables, and the USB-C port can be used to power or recharge the transmitter in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXDi receiver, included in your Blink 500 B3 kit changes this story. It's small and lightweight enough to remain mounted to your Apple device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage, and if you add a second Blink 500 TX transmitter (sold separately) you can easily put mics on two separate people.
An ideal wireless system.
Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. This system is perfect for people who only need one wireless mic right now but may need the option to expand and use two in the future. If you shoot video with an iPhone and a handheld gimbal, this is the best solution available for perfect sound from wireless transmitters. It's small enough to tuck away in a small pocket, so you can effortlessly bring the Blink 500 with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Transmitter Specifications:
Frequency: 2.4GHz
Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
RF Output Power: 10 mW
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
Microphone: Built-In Pressure Operated Electret Condenser
Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
Mounting Clip: Built-In
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Weight: 1.2 oz (34g)
Receiver Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: MFi Certified Lighting Apple Lightning Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic Blink 500 B4 2-Person Wireless Clip-On Mic System with Lavalier & Lightning Receiver for iPhone & iPad
$ 219.00 - Vendido
Saramonic Blink 500 B4 2-Person Wireless Clip-On Mic System with Lavalier & Lightning Receiver for iPhone & iPad
MFR SKU: BLINK500B4 | Helix SKU: SRBLINK500B4
Overview
The Saramonic Blink 500 B4 is an incredibly compact, lightweight, and professional sounding two-person wireless microphone system that was made for the Apple iPhone and iPad. The two included transmitters are small enough to clip directly to shirt collars, and the included RXDi MFi Certified Lighting receiver is so lightweight and unobtrusive that it can easily be used in handheld gimbals. The Blink 500 B4 makes using multiple wireless microphones with Apple devices as easy as possible and it provides broadcast-quality sound in a package that's amazingly compact and lightweight.
Tiny body, huge sound.
The versatile sub-compact wireless transmitters that come with the Blink 500 B4 have excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. They also operate as traditional bodypack transmitters with the included SR-M1 omnidirectional clip-on lavalier microphones, providing an even more professional and inconspicuous miking solution. The impossibly compact RXDi dual-receiver plugs directly into the Lightning port of your Apple device and doesn't require any batteries or charging to operate. It doesn't have any controls to fuss with, either. You just plug it in, and it works.
So advanced, it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B4 is so technically advanced that it couldn't be easier to use. Even though there are very few controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitters to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The internal Lithium batteries get 5 hours of life from a charge, and the USB-C charging ports can be used to power or recharge the transmitter in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXDi receiver, included in your Blink 500 B4 kit changes this story. It's small and lightweight enough to remain mounted to your Apple device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage with the fantastic ability to put wireless mics on two separate people.
An ideal wireless system.
Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. If you shoot video with an iPhone and a handheld gimbal, this is the best solution available for perfect sound from two wireless transmitters. This system is small enough to tuck away in a small pocket, so you can effortlessly bring the Blink 500 with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Transmitter Specifications:
Frequency: 2.4GHz
Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
RF Output Power: 10 mW
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
Microphone: Built-In Pressure Operated Electret Condenser
Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
Mounting Clip: Built-In
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Weight: 1.2 oz (34g)
Receiver Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: MFi Certified Lighting Apple Lightning Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic Blink 500 B5 Wireless Clip-On Mic System with Lavalier & Dual USB-C Receiver for Android Devices & more
$ 169.00 - Vendido
Saramonic Blink 500 B5 Wireless Clip-On Mic System with Lavalier & Dual USB-C Receiver for Android Devices & more
MFR SKU: BLINK500B5 | Helix SKU: SRBLINK500B5
Overview
The Saramonic Blink 500 B5 is an extremely compact, lightweight, and professional sounding wireless microphone system that was made to be used with mobile devices that have USB-C ports, like Android smartphones or tablets, computers, and more. This kit comes with a single wireless transmitter with a built-in mic, a professional clip-on lavalier microphone, and a dual-channel receiver that's so lightweight and unobtrusive it can easily be used in handheld gimbals. You can put a mic on 1 person, but if you ever need to put mics on 2 people, you can simply add a second wireless transmitter (sold separately) and it will work perfectly with the included dual receiver.
Tiny body, huge sound.
The Blink 500 B5 is impossibly compact and lightweight, yet it delivers crystal-clear professional sound quality. The versatile transmitter features an excellent sounding built-in microphone that captures voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. It also operates as a traditional bodypack transmitter with the included SR-M1 professional omnidirectional clip-on lavalier microphone, providing an even more professional and inconspicuous miking solution. The RXUC receiver plugs directly into the USB-C port of your device and doesn't require any batteries or charging to operate. It doesn't have any controls to fuss with, either. You just plug it in, and it works. It's compatible with a wide range of products that have USB-C ports, from Android smartphones and tablets to modern Apple Mac computers and Windows PCs, to Chromebooks and even the 2018 iPad Pro tablets.
So advanced, it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B5 is so technically advanced that it couldn't be easier to use. Even though there are very few controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitter to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why the Blink 500 transmitter has easy-to-use gain buttons to raise or lower the levels, and an intelligent LED display shows you where they're set. Its internal Lithium battery gets 5 hours of life from a charge, and its USB-C charging port can be used to power or recharge it in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXUC included in your Blink 500 B5 kit changes this story. It's small and lightweight enough to remain mounted to your smartphone and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage, and if you add a second Blink 500 transmitter (sold separately) you can easily put mics on two people.
An ideal wireless system.
Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. This system is perfect for people who only need one wireless mic right now but may need the option to expand and use two in the future. If you shoot video with a mobile device and a handheld gimbal, this is the best solution available for perfect sound from wireless transmitters. It's small enough to tuck away in a small pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Transmitter Specifications:
Frequency: 2.4GHz
Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
RF Output Power: 10 mW
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
Microphone: Built-In Pressure Operated Electret Condenser
Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
Mounting Clip: Built-In
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Weight: 1.2 oz (34g)
Receiver Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: USB-C Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic Blink 500 B6 2-Person Wireless Clip-On Mic System with Lavalier & USB-C Receiver for Android Devices & more
$ 219.00 - Vendido
Saramonic Blink 500 B6 2-Person Wireless Clip-On Mic System with Lavalier & USB-C Receiver for Android Devices & more
MFR SKU: BLINK500B6 | Helix SKU: SRBLINK500B6
Overview
The Saramonic Blink 500 B6 is an incredibly compact, lightweight, and professional sounding two-person wireless microphone system that was made to be used with mobile devices that have USB-C ports, like Android smartphones or tablets, computers, and more. The two included transmitters are small enough to clip directly to shirt collars, and the included RXUC receiver is so lightweight and unobtrusive that it can easily be used in handheld gimbals. The Blink 500 B6 makes using multiple wireless microphones as easy as possible and it provides broadcast-quality sound in a package that's incredibly compact and lightweight.
Tiny body, huge sound.
The versatile sub-compact wireless transmitters that come with the Blink 500 B6 have excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. They also operate as traditional bodypack transmitters with the included SR-M1 omnidirectional clip-on lavalier microphones, providing an even more professional and inconspicuous miking solution. The impossibly compact RXUC dual-receiver plugs directly into the USB-C port of your device and it doesn't require any batteries or charging to operate. There are no controls to fuss with, either. You just plug it in, and it works.
So advanced, it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B6 is so technically advanced that it couldn't be easier to use. Even though there are very few controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitters to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The internal Lithium batteries get 5 hours of life from a charge, and the USB-C charging ports can be used to power or recharge the transmitter in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXUC included in your Blink 500 B6 kit changes this story. It's small and lightweight enough to remain mounted to your device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage with the fantastic ability to put wireless mics on two separate people.
An ideal wireless system.
Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. If you shoot video with a mobile device and a handheld gimbal, this is the best solution available for perfect sound from wireless transmitters. This system is small enough to tuck away in a small pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Transmitter Specifications:
Frequency: 2.4GHz
Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
RF Output Power: 10 mW
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
Audio Gain Control: 11dB, 18dB, 25dB
Plug-In Power: Yes, 1V
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
Antenna: Built-in 1/4λ Wire Antenna
Buttons: On / Off / Pair, Volume Up, Volume Down
Battery: Built-in Li-ion 3.7V / 400mAh
Approx. Battery Life: 5 hours
Charging Connector: USB Type-C (1.5 hours to be fully charged)
Input: 1/8'' (3.5mm) Microphone Input
Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished
Microphone: Built-In Pressure Operated Electret Condenser
Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
Mounting Clip: Built-In
Operating Temperature: 0℃ to 50℃
Storage Temperature: -20℃ to +50℃
Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Weight: 1.2 oz (34g)
Receiver Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: USB-C Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic Blink 500 RXDi Dual-Channel Lightning Wireless Microphone Receiver for iPhone and iPad
$ 89.00 - Vendido
Saramonic Blink 500 RXDi Dual-Channel Lightning Wireless Microphone Receiver for iPhone and iPad
MFR SKU: BLINK500RXDI | Helix SKU: SRBLINK500RXDI
Overview
The Saramonic Blink 500 RXDi is an incredibly compact, lightweight, and professional sounding wireless dual-receiver that was made for the Apple iPhone and iPad. It's so lightweight and unobtrusive that it can easily be used in handheld gimbals and can handle up to two separate Blink 500 TX wireless transmitters (sold separately). The RXDi makes using multiple wireless microphones with Apple devices as easy as possible. It connects directly to the Lightning port, and no batteries or charging is required. The RXDi provides broadcast-quality sound in an incredibly compact and lightweight package.
So advanced, it's effortless.
Some wireless microphone receivers are complicated to operate, but the Blink 500 RXDi is so technically advanced that it couldn't be easier to use. There are no controls to adjust, but the device does a lot behind the scenes to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing with transmitters is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXDi changes this story. It's small and lightweight enough to remain mounted to your Apple device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage when used with Blink 500 TX transmitters (sold separately).
Blink 500: a diverse ecosystem.
There's a large family of innovative Blink 500 wireless microphone products and they're are all ultra-compact, lightweight, and fully compatible with the Blink 500 RXDi. The Blink 500 TX is a tiny wireless transmitter with a high-quality built-in microphone, an external mic input (it comes with an external lavalier mic), a built-in Lithium battery, a USB-C charging port, gain buttons and multicolored LEDs. The Blink 500 RX is a dual-receiver that was designed to be mounted to the shoe of a camera and can handle up to two 500 TX transmitters at the same time. The Blink 500 RXUC is very similar to the RXDi except it has a USB-C connector for Android smartphones or tablets and modern Apple Mac and PC computers. It works perfectly with handheld gimbals, too. All of the receivers can handle up to two Blink 500 TX transmitters at the same time.
An ideal wireless system.
Even if you shoot video with a smartphone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. If you shoot video with an iPhone and a handheld gimbal, the Blink 500 RXDi is the best solution available for perfect sound from up to two wireless transmitters (sold separately). The RXDi is small enough to tuck away in a small pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: MFi Certified Lighting Apple Lightning Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic Blink 500 RXUC Dual-Channel USB-C Wireless Microphone Receiver for Android Mobile Devices & More
$ 89.00 - Vendido
Saramonic Blink 500 RXUC Dual-Channel USB-C Wireless Microphone Receiver for Android Mobile Devices & More
MFR SKU: BLINK500RXUC | Helix SKU: SRBLINK500RXUC
Overview
The Saramonic Blink 500 RXUC is an incredibly compact, lightweight, and professional sounding wireless dual-receiver that was made for devices with USB-C ports. It's compatible with a wide range of products, from Android smartphones and tablets to modern Apple Mac computers and Windows PCs, to Chromebooks and even 2018 iPad Pro tablets. It's so lightweight and unobtrusive that it can easily be used in handheld gimbals and can handle up to two separate Blink 500 TX wireless transmitters (sold separately). The RXUC makes using multiple wireless microphones as easy as possible. It connects directly to USB-C ports, so no batteries or charging is required. The RXUC provides broadcast-quality sound in an incredibly compact and lightweight package.
So advanced, it's effortless.
Some wireless microphone receivers are complicated to operate, but the Blink 500 RXUC is so technically advanced that it couldn't be easier to use. There are no controls to adjust, but the device does a lot behind the scenes to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing with transmitters is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Handheld gimbal, meet wireless sound.
Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It's simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXUC changes this story. It's small and lightweight enough to remain mounted to your mobile device and won't interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage when used with Blink 500 TX transmitters (sold separately).
Blink 500: a diverse ecosystem.
There's a large family of innovative Blink 500 wireless microphone products and they're are all ultra-compact, lightweight, and fully compatible with the Blink 500 RXUC. The Blink 500 TX is a tiny wireless transmitter with a high-quality built-in microphone, an external mic input (it comes with an external lavalier mic), a built-in Lithium battery, a USB-C charging port, gain buttons and multicolored LEDs. The Blink 500 RX is a dual-receiver that was designed to be mounted to the shoe of a camera and can handle up to two 500 TX transmitters at the same time. The Blink 500 RXDi is very similar to the RXUC except it has a Lightning connector for the Apple iPhones and iPad. It works perfectly with handheld gimbals, too. All of the receivers can handle up to two Blink 500 TX transmitters at the same time.
An ideal wireless system.
Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. If you shoot video with an Android smartphone and a handheld gimbal, the Blink 500 RXUC is the best solution available for perfect sound from up to two wireless transmitters (sold separately). The RXUC is small enough to tuck away in a small pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.
Specifications:
Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms
Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna
Connector: USB-C Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃
Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Weight: 0.35 oz (10g)
Saramonic C-XLR 3.5mm Female TRS to XLR Male Audio Adapter for Professional Cameras, Mixers, Recorders and more
$ 10.00 - Vendido
Saramonic C-XLR 3.5mm Female TRS to XLR Male Audio Adapter for Professional Cameras, Mixers, Recorders and more
MFR SKU: C-XLR | Helix SKU: SRCXLR
Overview
The Saramonic C-XLR is a versatile audio adapter that lets you easily connect microphones and audio sources that have 3.5mm male jacks into the XLR inputs on professional video and cinema cameras, audio recorders, mixers, and more. It's compatible with battery-powered, active or dynamic microphones, wireless receivers, 3.5mm line-level devices and more.
Tough and Lightweight Lifesaver
You need dependable, solidly built equipment and the C-XLR delivers with tough, all-brass construction and premium gold-plated connectors. The input is fully compatible with both regular or locking 3.5mm connectors and even is even threaded to conveniently secure locking connections. Whether you need to connect a battery-powered 3.5mm lavalier mic directly to a pro video camera, plug an active headset microphone into a sound system, use a battery-powered mini-plug shotgun microphone with a field mixer, connect a wireless receiver like the Saramonic Blink 500 (B1/B2) into a cinema camera, or connect a 3.5mm line signal to an PA mixer, the C-XLR will make it happen. It is an invaluable problem solver to have in your audio kit.
Specifications:
Adapter Type: 1/8“ (3.5mm) TRS Female to XLR Male
Input Compatibility: Standard and Locking 3.5mm Connectors
Dimensions: 0.9 x 3” (23 x 76.5mm)
Weight: 3.1oz (87.9g)
Saramonic C-XLR+ 3.5mm Female TRS to XLR Male Audio Adapter with Phantom Power to Plug-In-Power Converter for Pro Cameras, Mixers, Recorders and more
$ 20.00 - Vendido
Saramonic C-XLR+ 3.5mm Female TRS to XLR Male Audio Adapter with Phantom Power to Plug-In-Power Converter for Pro Cameras, Mixers, Recorders and more
MFR SKU: C-XLR+ | Helix SKU: SRCXLRP
Overview
The Saramonic C-XLR+ is a useful audio adapter that lets you easily connect microphones and audio sources that have 3.5mm male jacks into the XLR inputs on professional video and cinema cameras, audio recorders, mixers, and more. It's compatible with active, battery-powered microphones and passive microphones, such as the lavalier mics that come with wireless systems. If you engage phantom power on the camera or other device, a built-in converter in the C-XLR+ changes the current from +48-volts to the 3 to 5-volt current that plug-in-powered and some passive 3.5mm microphones require. This happens automatically. There are no controls on the C-XLR+ that need your attention.
Tough and Lightweight Lifesaver
You need dependable, solidly built equipment and the C-XLR+ delivers with tough, all-brass construction and premium gold-plated connectors and even is even threaded to conveniently secure locking connections. The input is fully compatible with both regular and locking 3.5mm connectors. Whether you need to connect a 3.5mm lavalier mic directly to a pro video camera, plug a headset microphone into a sound system, use a plug-in-powered mini-plug shotgun microphone with a field mixer, connect a wireless receiver like the Saramonic Blink 500 (B1/B2) into a cinema camera, or connect a 3.5mm line signal to an PA mixer, the C-XLR+ will make it happen. It is an invaluable problem solver to have in your audio kit and can even expand the use of your 3.5mm plug-in-powered, or lavalier microphones into your professional devices.
Specifications:
Length: 3.94” (100mm)
Width: 2.76” (70mm)
Height: 2.76” (70mm)
Weight: 0.6 (17g)
Saramonic CamMic+ On-Camera Battery-Powered Shotgun Microphone for DSLR, Mirrorless & Video Cameras or Smartphones & Tablets
$ 99.00 - Vendido
Saramonic CamMic+ On-Camera Battery-Powered Shotgun Microphone for DSLR, Mirrorless & Video Cameras or Smartphones & Tablets
MFR SKU: CAMMIC+ | Helix SKU: SRCAMMICP
Overview
The Saramonic CamMic+ is a lightweight yet durably built, AA-battery powered shotgun microphone that delivers clear, broadcast-quality sound to DSLR, mirrorless, video cameras and mobile devices. Its directional pickup pattern excels at capturing sounds in front of the mic, while rejecting sounds to the sides and rear. It’s a premium quality microphone with impressively quality construction at an affordable price that’s incredibly easy to use, and it can be used with a wide variety of cameras and mobile devices.
A stand out feature of the CamMic+ design is the unique microphone shockmount. The wiry shockmounts on some competing microphones are flimsy and prone to bending, this can cause some unwanted audio issues and change the way the microphone picks up sound. The integrated shockmount of CamMic+ is robust and features a sleek, sweeping and stable design.
A dual layered uniquely designed bullet like windscreen is included, giving the CamMic+ its unique and interesting look. It features a sturdy gasket which aids in blocking wind noise, helps to protect the microphone from things like weather and dust, and keeps it securely fastened in place while on the go.The output cable of the CamMic+ is removable. An 1/8" (3.5mm) TRS cable for connecting to cameras is included, in addition to a 1/8" (3.5mm) TRRS cable for connecting to smartphones and tablets. On the back of the mic there is a 3-position switch for OFF, ON, and an 80Hz high-pass filter that enables you to eliminate unwanted rumble sounds and make dialog more intelligible when shooting in noisy environments. A built-in camera shoe-mount features a metal 1/4 20 tripod thread at the base that gives you near limitless mounting options.
Powered by a single AA battery, the CamMic+ is the ideal choice for cameras that don’t provide plug-in power. Allowing you to shoot for days without replacing the battery. For those filmmakers worried about conserving as much camera/mobile device power as possible, the CamMic+ would be the mic of choice. There is also a Blue LED indicator light that will illuminate when the mic is on and turn red when your battery needs to be replaced.
- Provides clear, broadcast-quality sound to DSLR, Mirrorless and Video Cameras or Smartphones and Tablets
- AA Battery-powered for cameras that lack plug-in-power or to save camera battery life
- Easy-to-use with plug-and-play operation. Includes two output cables: one for cameras, one for mobile devices
- Sleek camera-mountable design that is lightweight and compact, yet features an impressively solid construction
- Double thickness windscreen and low-cut filter improves intelligibility of dialog in any situation
Specifications:
Type: Condenser MicrophonePolar Pattern: Cardioid (Uni-Directional)
Frequency Range: 40Hz - 10kHz
Sensitivity: -45 ±3dB (0dB = 1V/Pa, @ 1kHz)
Maximum Input SPL: f=1kHz, THD<5% (106dB)
Output Impedance: 200ohm
Signal to Noise Ratio: 80dB SPL
Power Requirements: One AA Battery
Weight: 3.77oz (107g)
Dimensions: 6.47 x 2.12 x 3.29” (164.4 x 53.9 x 83.5mm)
Product Weight: 0.107kg
Product Length: 16.4cm
Product Width: 8.4cm
Product Height: 5.4cm
Package Weight: 0.327kg
Package Length: 30cm
Package Width: 13cm
Package Height: 7.5cm
1-Year Warranty
Saramonic CamMic-WS Slide-On Furry Windscreen for the Saramonic CamMic
$ 79.00
Saramonic CamMic-WS Slide-On Furry Windscreen for the Saramonic CamMic
MFR SKU: CAMMIC | Helix SKU: SRCAMMIC
Overview
The Saramonic CamMic-WS is a furry windscreen that is designed for higher outdoor wind conditions, when the foam windscreen just won’t do. Its long-haired exterior and nylon interior provides dual-layered wind protection. Drastically improving wind diffusion and reducing wind noise up to 40dB.
Designed for the Saramonic CamMic, it easily slips right over the CamMic’s foam windscreen. It is an ideal solution to get the best quality sound in high wind recording environments.
Specifications:
Length: 3.94” (100mm)
Width: 2.76” (70mm)
Height: 2.76” (70mm)
Weight: 0.6 (17g)
Saramonic CamMic-WS Slide-On Furry Windscreen for the Saramonic CamMic
$ 18.00 - Vendido
Saramonic CamMic-WS Slide-On Furry Windscreen for the Saramonic CamMic
MFR SKU: CAMMICWS | Helix SKU: SRCAMMICWS
Overview
The Saramonic CamMic-WS is a furry windscreen that is designed for higher outdoor wind conditions, when the foam windscreen just won’t do. Its long-haired exterior and nylon interior provides dual-layered wind protection. Drastically improving wind diffusion and reducing wind noise up to 40dB.
Designed for the Saramonic CamMic, it easily slips right over the CamMic’s foam windscreen. It is an ideal solution to get the best quality sound in high wind recording environments.
Specifications:
Length: 3.94” (100mm)
Width: 2.76” (70mm)
Height: 2.76” (70mm)
Weight: 0.6 (17g)
Saramonic SmartMic+ Di Compact Directional Microphone with Lightning Connector for Apple iPhone & iPad
$ 75.00
Saramonic SmartMic+ Di Compact Directional Microphone with Lightning Connector for Apple iPhone & iPad
MFR SKU: SMARTMIC+DI | Helix SKU: SRSMARTMICPDI
Overview
The Saramonic SmartMic+ Di is an ultra-lightweight and compact microphone that plugs directly into the Lightning port on the iPhone or iPad and vastly improves the sound quality of the videos you shoot and the audio you capture. The directional pickup pattern excels at focusing on the sounds in front of it, while rejecting sounds to the sides and rear. Producing audio that is intelligible and clear, even in busy environments.
Using SmartMic+ Di couldn’t be easier. You simply plug it into your mobile device and start creating. There are no batteries to install or charge, and there are no levels to set. It’s truly plug-and-play. A gold-plated headphone jack on the back enables you to easily listen to your audio without needing to remove the SmartMic+ Di. You can also listen to the sound as you record, but this capability needs to be supported by the app you’re using.
A snug-fitting foam windscreen is included that won’t accidentally fall off when in use or transit. When you need to use SmartMic+ Di in windy environments, a sensibly sized furry windscreen is also included that can be pulled over the foam windscreen for ultimate protection from wind noise. The SmartMic+ Di can be positioned both facing forward, when using the selfie camera on your Apple device or facing outward, when taking advantage of your device’s high-end camera. It captures audio that is rich and detailed, but the unit itself is ultra-compact, small enough to fit in your pocket and weighs only 40 grams, so you can easily bring it with you everywhere you go. The SmartMic+ Di is also rugged, made with durable metal, so you can rest assured that it’s well equipped for your adventures.
- Provides broadcast-quality sound to iPhones and iPads by plugging into the Lightning port for shooting video, recording audio, live-streaming, vlogging, podcasting and more
- Lightweight and ultra-portable yet rugged, durable metal microphone that provides simple plug-and-play usage, never requires batteries or charging
- 1/8” (3.5mm) Headphone jack for real-time monitoring while making recordings (app dependent) and listening to playback without removing microphone
- Directional pickup pattern clearly captures sounds in front of the mic while rejecting sounds to the sides and rear and can be positioned facing forward when using the selfie camera, or facing outward
- Includes both a snug-fitting foam windscreen for indoor use and a sensibly sized furry wind protector for outdoor use
Specifications:
Microphone Type: Directional Condenser
Polar Pattern: Cardioid
Outputs: 1 x 1/8“ (3.5 mm) headphone jack
Connectivity: 1 x Lightning male connector
Frequency Response: 75Hz to 20kHz
Sensitivity: -35 ±3dB (0dB=1V/Pa at 1KHz)
Maximum Input SPL: f=1kHz, THD<5% (105 dB)
Output Impedance: 600 Ohm
Signal to Noise Ratio: 75 dB SPL
Dimensions: 2.8 x 1 x 1.9” (71.6 x 25.5 x 48.6 mm)
Weight: 1.41 oz (40 g)
Saramonic SmartMic+ UC Compact Directional Microphone with USB-C Connector for Android Smartphones & Tablets
$ 75.00 - Vendido
Saramonic SmartMic+ UC Compact Directional Microphone with USB-C Connector for Android Smartphones & Tablets
MFR SKU: SMARTMIC+UC | Helix SKU: SRSMARTMICPUC
Overview
The Saramonic SmartMic+ UC is an ultra-lightweight and compact microphone that plugs directly into the USB-C port on Android smartphones and tablets and vastly improves the sound quality of the videos you shoot and the audio you capture. The directional pickup pattern excels at focusing on the sounds in front of it, while rejecting sounds to the sides and rear. Producing audio that is intelligible and clear, even in busy environments.
Using SmartMic+ UC couldn’t be easier. You simply plug it into your mobile device and start creating. There are no batteries to install or charge, and there are no levels to set. It’s truly plug-and-play. A gold-plated headphone jack on the back enables you to easily listen to your audio without needing to remove the SmartMic+ UC. You can also listen to the sound as you record, but this capability needs to be supported by the app you’re using.
A snug-fitting foam windscreen is included that won’t accidentally fall off when in use or transit. When you need to use SmartMic+ UC in windy environments, a sensibly sized furry windscreen is also included that can be pulled over the foam windscreen for ultimate protection from wind noise. SmartMic+ UC can be positioned both facing forward, when using the selfie camera on your Android device or facing outward, when taking advantage of your device’s high-end camera. It captures audio that is rich and detailed, but the unit itself is ultra-compact, small enough to fit in your pocket and weighs only 40 grams, so you can easily bring it with you everywhere you go. The SmartMic+ UC is also rugged, made with durable metal, so you can rest assured that it’s well equipped for your adventures.
- Provides broadcast-quality sound to Android smartphones and tablets that have USB-C ports when shooting video, recording audio, live-streaming, vlogging, podcasting and more
- Lightweight and ultra-portable yet rugged, durable metal microphone that provides simple plug-and-play usage, never requires batteries or charging
- 1/8” (3.5mm) Headphone jack for real-time monitoring while making recordings (app dependent) and listening to playback without removing microphone
- Directional pickup pattern clearly captures sounds in front of the mic while rejecting sounds to the sides and rear and can be positioned facing forward when using the selfie camera, or facing outward
- Includes both a snug-fitting foam windscreen for indoor use and a sensibly sized furry wind protector for outdoor use
Specifications:
Microphone Type: Directional Condenser
Polar Pattern: Cardioid
Outputs: 1 x 1/8“ (3.5 mm) headphone jack
Connectivity: 1 x USB Type-C male connector
Frequency Response: 75Hz to 20kHz
Sensitivity: -35 ±3dB (0dB=1V/Pa at 1KHz)
Maximum Input SPL: f=1kHz, THD<5% (105 dB)
Output Impedance: 600 Ohm
Signal to Noise Ratio: 75 dB SPL
Dimensions: 2.8 x 1 x 1.9” (71.6 x 25.5 x 48.8 mm)
Weight: 1.41 oz (40 g)
Saramonic SmartMixer Smartphone Mixer with Dual Microphones, Handgrip & Headphone Output for Apple iPhone & Android
$ 119.00 - Vendido
Saramonic SmartMixer Smartphone Mixer with Dual Microphones, Handgrip & Headphone Output for Apple iPhone & Android
MFR SKU: SMARTMIXER | Helix SKU: SRSMARTMIXER
Overview
Smartphones can shoot incredible looking video, but the audio quality they provide is usually a massive disappointment. The Saramonic SmartMixer is a compact mixer and microphone kit that seamlessly integrates with your phone and vastly improves the sound quality of the videos you shoot. The included hand grip and mount improves the stability of your videos as well.
The lightweight and compact SmartMixer runs on a single 9-volt battery and comes with two low-profile condenser microphones that plug into it. These mics can swivel up and down and rotate to point at people and other sound sources. A mini-XLR input on the side with +48 volts phantom power makes it possible to use any professional microphone, such as a shotgun or handheld interview microphone with your smartphone.
An easy-to-use stepped gain knob lets you set perfect levels, and a backlit display enables you to always see your audio meters and remaining battery level even in the darkest or brightest environments. A dedicated switch toggles between recording and playback modes, so you can easily listen to your videos through the SmartMixer’s headphone jack. The versatile smartphone clamp lets you to shoot in either landscape or portrait mode for vertical video and it can be adjusted to fit smartphones up to 3.6” (9.1 cm) wide with a case, which will accommodate even the largest handheld devices. A shoe mount is provided at the top to attach microphones, wireless receivers or lights, and a tripod thread at the base gives you further mounting options.
- All-in-one solution for improving smartphone video sound and stabilization
- Includes microphones, output and input cables, phone clamp and grip
- Can provide +48 volts of phantom power to professional XLR mics
- Compatible with Apple iPhones and Android devices with 1/8“ (3.5mm) headphone jacks
- Shoot in either cinematic landscape or vertical video portrait mode
Specifications:
Signal to Noise Ratio: 82 dB @ 1 kHz, -30 dBu input
Distortion: Less than 0.03% @ 1 kHz, -30 dBu input
Input 1 Gain: 15 dB
Input 2 and Mini XLR Jack Gain: 15 dB
Microphone Inputs 1 & 2 Power: +5V Microphone Power
XLR Mini Input Power: +48V Phantom Power (On/Off)
VU Meter: -18 dB to +3 dB in 3 dB increments
Power Requirements: 9V alkaline or lithium battery
Assembled Dimensions: 3.74 x 1.38 x 11.73” (95 x 35 x 298mm)
Assembled Weight: 26.1 oz (739.92g)
Mixer Dimensions: 3.7 x 2.5 x 1.4" (95 x 35 x 65 mm)
Mixer Weight: 5.5 oz (155g)
Smartphone Grip and Holder Dimensions: 10.2 x 1.7 x 1.1" (26 x 4.3 x 2.8cm)
Smartphone Grip and Holder Dimensions Weight: 10.8 oz (306g)
Saramonic SoundBird V1 Professional Supercardioid Shotgun Microphone with High-Pass Filter, -10dB Pad, Shock Mount, Foam Windscreen & Short XLR Output Cable
$ 199.00
Saramonic SoundBird V1 Professional Supercardioid Shotgun Microphone with High-Pass Filter, -10dB Pad, Shock Mount, Foam Windscreen & Short XLR Output Cable
MFR SKU: SOUNDBIRDV1 | Helix SKU: SRSOUNDBIRDV1
Overview
The Saramonic SoundBird V1 is a professional shotgun microphone that delivers premium, broadcast-quality sound, provides advanced features and comes with a suite of useful accessories. It features a supercardioid, directional pickup pattern allows you to clearly capture sounds in front of the microphone and from a distance, while rejecting unwanted sound from sides and rear. The all-brass construction is both incredibly durable and helps to reduce radio-frequency interference and the finish is both attractive and non-reflective. So, you can be sure it won’t catch the light, and add a glare to your shot. The XLR output is gold-plated to resist corrosion and provide the best possible signal transfer. The 10.7” length is the perfect size to either mount to a camera or use on boom poles and stands.
Shine a light on excellent sound
You will always know what settings are being used on your versatile SoundBird V1 because the built-in buttons are illuminated. The first button activates the high-pass filter, which removes unwanted low-frequency sounds, like the rumble of HVAC systems, footsteps and traffic noise. The second button activates the -10dB pad, which enables you capture louder sounds without distortion. The third button is On/Off, which controls the internal AA battery. When you power SoundBird V1 with external phantom power, the On/Off button illuminates green. When powering with an internal AA battery, it illuminates blue. When the battery is low, it illuminates red. SoundBird V1 also remembers your button settings when turned off and on.
Must-have accessories are included
There are several useful accessories included in the box. You get an adjustable premium shock mount, which allows you to attach the SoundBird V1 to the shoe of a camera or on to a boom pole or stand. The shock mount eliminates vibration and handling noise. A foam windscreen is also included, which diffuses rushing air noise when used indoors, and gentle breezes when used outdoors. A 2-foot (61cm) XLR cable is also included, which is the ideal length when mounting to a camera.
- Professional shotgun microphone that delivers premium, broadcast-quality sound for video production, interviews, filmmaking, YouTube videos and more
- Features a built-in high-pass filter that removes unwanted low-frequency sounds and a -10dB pad for capturing loud sounds, both are controlled with dedicated illuminated buttons
- Powered with an internal removable AA battery or external phantom power, illuminated On/Off button changes color based on power source and battery level
- Durable solid brass construction prevents radio-frequency interference, gold-plated XLR connector resists corrosion and provides the best possible signal transfer
- Includes a foam windscreen, 2-foot (61cm) XLR output cable, and a premium shock mount to attach directly to a camera, stand, or a boom pole
Specifications:
Microphone Type: Condenser
Polar Pattern: Supercardioid
Frequency Range: 50Hz to 20kHz
Sensitivity: -32±3dB (0dB-1V/Pa, at 1kHz)
Signal-to-Noise Ratio: 80dB SPL
Maximum SPL: 132dB
High-Pass Filter: 200Hz
Pad: -10dB
Power Requirements: 48V Phantom Power or 1 x AA Battery
Operating Temperature: 23°F to 122F (-5°C to 50°C)
Output Connection: 3-pin XLR, Balanced Output Between Pin 2 (+), Pin 3 (-) and Pin 1 (Ground)
Diameter: 0.78” (20mm)
Length: 10.7” (272mm)
Weight: 6.88oz (195g)
Saramonic SR-HM7 UC Digital Dynamic Handheld Microphone with USB-C for Android Smartphones & Tablets & USB for Windows PCs & Apple Mac Computers
$ 199.00 - Vendido
Saramonic SR-HM7 UC Digital Dynamic Handheld Microphone with USB-C for Android Smartphones & Tablets & USB for Windows PCs & Apple Mac Computers
MFR SKU: SR-HM7UC | Helix SKU: SRSRHM7UC
Overview
The Saramonic SR-HM7 UC is a handheld digital dynamic microphone that delivers premium, broadcast-quality sound and comes with dedicated output cables for direct connection to the USB-C ports found on modern Android devices and computers, and a USB-A cable for use with Windows PCs and Apple Macintosh computers. A built-in headphone jack lets you to listen to your sound during recording and playback. The microphone element was designed to enhance the clarity of the human voice, which makes it an excellent choice for use in podcasting, presentation videos, news gathering, audio for smartphone videos, live streaming, vlogging, music recording and more.
The SR-HM7 UC is incredibly easy to use. You just connect an output cable and start recording. A switch at the base allows you to change between Recording to Playback operation modes. An included rubbery bottom cap allows you to keep the output connector firmly attached to the base of the microphone. This prevents the cables from accidentally being disconnected, which is ideal for recording audio and shooting video on-the-go. The sleek black exterior of the SR-HM7 UC features an anti-glare finish that looks great on camera and will not reflect on-camera lights, stage lights, or studio lights.
The long, tapered handle of the SR-HM7 UC is comfortable to hold and provides plenty of space for mic flags to advertise your channel or brand. The all-metal design helps to reduce handling noise, and the durable microphone grill diffuses wind noise — which helps you get great sound outdoors. The cardioid pickup pattern reduces unwanted sounds to the sides and rear, and the built-in high-quality preamp and analog-to-digital converter ensure that you get the best possible audio quality. Whether you’re shooting on-the-street interviews with your Android phone for your YouTube channel or a major network, or if you’re recording a podcast at home on your computer or in the field with your mobile device, the SR-HM7 UC will deliver rich and detailed sound every time.
- Professional handheld USB microphone that delivers broadcast-quality sound with direct connection to Android mobile devices, Windows PCs and Apple Macintosh computers
- Incredibly easy to use — just connect to your device and start recording, a dedicated headphone jack lets you monitor audio during recording and playback
- Durable all-metal design reduces handling noise, long tapered handle looks professional and provides ample space for mic flags
- Frequency response optimized for clarity of the human voice, cardioid pickup pattern reduces unwanted sounds to the sides and rear, grill diffuses wind noise outdoors
- Sleek black exterior features an anti-glare finish that will not reflect on-camera, stage, or studio lights, built-in high-quality preamp and analog-to-digital converter
Specifications:
Frequency Response: 75 Hz - 20 kHz
Output: Micro USB port
Headphone Output: 1/8" (3.5 mm)
Type of Microphone: Unidirectional dynamic capsule
Sampling Rate: 44.1 kHz, 48 kHz, 96 kHz
Sensitivity: 0°-52.4 dB±3 dB(0 dB= 1V/ ubar at 1KHz)
Gain: 35 dB
Signal to Noise Ratio: 80 dBU
Power: USB
Compatible Devices: Windows PC computers, Apple Macintosh computers, Android devices with USB-C ports, Chromebooks
Indicators: Blue light = recording mode, green light = playback mode, green and blue light = recording and playback at the same time
Dimensions: 2 x 10.2” (51 x 258 mm)
Weight: 10.2 oz (290 g)
SARAMONIC UWMIC15 16-CHANNEL UHF WIRELESS LAVALIER MICROPHONE SYSTEM WITH PORTABLE CAMERA-MOUNTABLE WIRELESS RECEIVER
$ 149.00 - Vendido
SARAMONIC UWMIC15 16-CHANNEL UHF WIRELESS LAVALIER MICROPHONE SYSTEM WITH PORTABLE CAMERA-MOUNTABLE WIRELESS RECEIVER
MFR SKU: UWMIC15 | Helix SKU: SRUWMIC15
Overview
The Saramonic UwMic15 is a portable, camera-mountable wireless microphone system that utilizes the UHF (Ultra High Frequency) spectrum and provides stellar, broadcast-quality sound in a package that’s substantially more affordable than other UHF wireless systems. The included RX15 receiver and TX15 beltpack transmitter are both compact and lightweight, and the SR-M1 clip-on lavalier microphone sounds excellent and is visually discreet when clipped to collars and clothing. The UwMic15 system is perfect for DSLRs, mirrorless cameras, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube and more.
It works right out of the box and is remarkably easy to use. You just connect the microphone, turn on the power and go. The RX15 receiver features a headphone output, enabling real-time audio monitoring if your camera lacks a headphone jack. The UHF spectrum helps you avoid interference, and the 555-579 MHz range is not impacted by the FCC’s ban of the 600 MHz frequencies. Easy-to-read backlit LCD displays let you make quick adjustments to the intuitive menus in the brightest or darkest environments. There are 16 channels available, which allows you to run multiple sets of UwMic15 systems at the same time. If you ever have an issue with interference and need to change channels, built-in infrared makes synchronizing easy.
The power button on the TX15 beltpack transmitter can easily be set to “locked” to prevent it from accidentally being turned off when in use. If the person wearing the microphone needs privacy, a quick push of a button turns on a muting feature, and a flashing red LED reminds you to unmute it afterward. The system offers an impressive operating range of up to 330-feet (100m).
This kit includes both 1/8“ (3.5mm) and XLR output cables so you can use the UwMic15 with DSLRs, mirrorless cameras, cinema cameras, camcorders, professional video cameras, audio recorders, mixers and more. The UwMic15 system is also expandable. Optional transmitters and output cables (sold separately) are available, giving you unrivaled flexibility. They make it possible to use a wireless handheld microphone with the SR-HM15 or a wireless XLR plug-on transmitter with the SR-XLR15, and to connect the included RX15 receiver to smartphones, tablets, computers, GoPro cameras and more.
- Broadcast-quality UHF wireless lavalier microphone system with camera-mountable portable receiver, UHF frequency spectrum helps you avoid interference
- Headphone monitor output enables you to always listen to your sound, even if your camera lacks a headphone jack
- Easy-to-use with plug-and-play operation, easy-to-read backlit LCD displays on both units, included microphone and output cables feature locking connectors to prevent unplugging
- Wireless infrared synchronization makes it easy to sync channels between the RX15 receiver and TX15 transmitter, 16 selectable channels for running multiple systems
- Up to 330-ft (100m) operating distance, mute button function with red flashing LED to remind you it’s muted
Specifications:
Channels: 16
Oscillator Type: PLL synthesizer
Output: 1/8“ (3.5mm) mini jack
Antenna: 1/4 λ wire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Frequency Range: 555 - 579 MHz
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Power: 2 x AA batteries
Dimensions: 7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.58oz (73g) without batteries
TX15 Transmitter Specifications:
Channels:16
Oscillator Type: PLL synthesizer
Carrier Frequencies:555 - 579 MHz
Reference Deviation: +/- 5 kHz
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4 λ wire antenna
Audio Input Connector: 1/8“ (3.5mm) mini jack
Reference Audio Input Level: -60 dBV
Distortion: 0.5% or less
Power: 2 x AA batteries
Dimensions:7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.4oz (68g) without batteries0
In The Box:
1 x RX15 portable UHF receiver
1 x TX15 UHF transmitter
1 x SR-M1 omnidirectional lavalier microphone
1 x alligator-style lavalier mic clip
1 x camera shoe mount with an integrated 1/4 20 tripod thread
1 x short coiled locking mini-plug output cable with gold-plated connectors
1 x short locking gold-plated mini-plug to XLR male output cable
2 x removable belt clips
2 x SR-UMBC1 battery compartments
1 x printed manual
1 x warranty card
Optional Accessories (Sold Separately):
- SR-XLR15 Plug-on UHF transmitter with +48V phantom power for XLR microphones
- SR-HM15 Wireless UHF handheld vocal microphone
- LC-C35 Output Cable: Locking 1/8” (3.5mm) to Lightning cable for iPhone & iPad
- UTC-C35 Output Cable: Locking 1/8” (3.5mm) to USB Type-C cable for smartphone or tablets
- SR-PMC1 Output Cable: Locking 1/8” (3.5mm) to TRRS cable for Smartphone or Tablets
- USB-CP30 Output Cable: Locking 1/8” (3.5mm) to USB cable PC or Mac computers
- SR-GMC1 Output Cable: Locking 1/8” (3.5mm) to select GoPro cameras
- LM-WS Fur Windjammer for SR-M1 Lavalier 3-Pack
- SR-LMWS3 Replacement Foam Windscreens 3-Pack
- WM4C-MC1 Replacement Mic Clip
- SR-XM1 Swiveling Omnidirectional Condenser Microphone
- SR-UMBC1 Replacement Battery Compartment
- SR-UM10-MC2 Replacement Belt Clip
- SR-UM10-MC1 Replacement Shoe-Mount Adapter
- SR-UM10-C35XLR Replacement Locking type 1/8” (3.5mm) to XLR Male Output Cable
- SR-UM10-C35 Replacement Locking type 1/8” (3.5mm) to 1/8” (3.5mm) Output Cable
- SR-UM10-M1 Replacement SR-M1 Lavalier
- SR-UC-201 3.5mm Female TRS Microphone Adapter Cable to 3.5mm Male TRRS for smartphone or tablets
- SR-25C35 3.5mm to 2.5mm Microphone Output Cable for SSE with Fuji Cameras
- SR-TX15 Replacement UHF beltpack transmitter
SARAMONIC UWMIC9 HU9 WIRELESS UHF HANDHELD CARDIOID MICROPHONE TRANSMITTER FOR UWMIC9 RX9 RECEIVER
$ 149.00 - Vendido
SARAMONIC UWMIC9 HU9 WIRELESS UHF HANDHELD CARDIOID MICROPHONE TRANSMITTER FOR UWMIC9 RX9 RECEIVER
MFR SKU: UWMIC9-HU9 | Helix SKU: SRUWMIC9HU9
Overview
The Saramonic HU9 is a handheld microphone with a built-in UHF wireless transmitter and integrated antenna that provides rich, broadcast-quality sound in a durable yet sleek metal body. It’s perfect for use with DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. The HU9 features sturdy metal construction and delivers excellent sound quality at an affordable price. It’s compact, lightweight, and easy to bring with you on every shoot.
The HU9 is designed to be used with the Saramonic UwMic9 RX9 dual-channel wireless camera-mountable receiver (sold separately). The RX9 enables you to have two on-camera subjects with their own wireless microphones by adding either a TX9 beltpack transmitter and clip-on lavalier microphone, a TX-XLR9 plug-on transmitter and a handheld XLR microphone, or a second HU9 handheld microphone.
The exterior of the HU9 has only one button which makes operating it extremely easy. The combo mute/power button can be locked with a switch hidden inside the body to prevent the person holding the mic from accidentally muting, changing the channel or turning it off. An easy-to-read backlit LCD display clearly shows the remaining battery life, mute status, and the group and its operating channel. A protective ring around the perimeter of the grill prevents the HU9 from rolling when resting on flat surfaces.
The HU9 transmitter also features a selectable RF power output. The “Low” setting lets you extend battery life in situations where the subject is close to the receiver. Medium and High are useful when the subject is going to be further away, or when you’re using the HU9 in an environment with more potential interference. The HU9 is a high-quality piece of equipment with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Broadcast-quality UHF wireless handheld microphone transmitter for the dual-channel RX9 receiver (sold separately)
- Cardioid pickup pattern rejects unwanted sounds from the sides and rear
- Rugged all-metal construction that has a has a professional, sleek look with easy-to-read backlit LCD display, easy-to-use menus and a single-button control
- Switchable Low or High RF power output for increased battery life or range
- Offers up to 330-foot (100m) operating distance with infrared that makes it easy to sync channels with receiver
Specifications:
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Polar Pattern: Cardioid
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 10 x 2.05 x 2.05” (254 x 52 x 52 mm)
Weight: 11.93oz (338.2g) (without batteries)
In The Box:
1 x HU9 handheld microphone
1 x Printed user manual
1 x Warranty card
Optional Accessories (Sold Separately):
- SR-HM7-WS2 Foam Windscreen for SR-HM7 (2-pack)
- SR-RX9 UwMic9 Dual-Channel Camera-Mountable Receiver
Saramonic Uwmic9 Rx-XLR9 Compact Plug-On Dual-Channel Uhf Wireless Receiver
$ 199.99 - Vendido
Saramonic Uwmic9 Rx-XLR9 Compact Plug-On Dual-Channel Uhf Wireless Receiver
MFR SKU: UWMIC9RX-XLR9 | Helix SKU: SRUWMIC9RXXLR9
Overview
The Saramonic UwMic9 RX-XLR9 is an ultra-portable, ultra-compact dual-channel UHF wireless microphone receiver that can mount directly to an XLR input of a professional video camera, mixer or an audio recorder. With the included accessories it can also easily be mounted to the shoe of a DSLR, Mirrorless or Video Camera and plugged into a 1/8“ (3.5mm) mic input. Its dual-channel ability allows you to use wireless microphones on two separate people with only a single RX-XLR9 (transmitters sold separately). Very easy to use, the RX-XLR9 features durable metal construction, and provides pristine, broadcast-quality sound for interviews, film dialog, field recording, TV and news gathering.
Unlike other Plug-In wireless receivers that require expensive proprietary batteries, the RX-XLR9 runs on 2 standard AA’s, and can be powered with an external USB battery pack (sold separately). A headphone output is built-in, so you can always monitor your sound, even when your camera lacks a headphone jack. An easy-to-read backlit LCD display lets you make quick adjustments to its intuitive menus in the brightest or darkest environments. The RX-XLR9 can be rotated 320° to make room for other equipment when mounted to a camera. The UwMic9 RX-XLR9 is ideal for use with professional video cameras, DSLRs, mirrorless cameras, mixers and portable audio recorders.
The RX-XLR9 utilizes the UHF (Ultra High Frequency) spectrum, which helps you avoid interference, and its 514-596 MHz range in 96 selectable channels is not impacted by the FCC’s ban of the 600 MHz frequencies. An automatic-scan feature locates the best available channel for you and the infrared synchronization makes the process a snap.
A variety of excellent wireless transmitters are available to use with your RX-XLR9, and because it works with two of them at the same time, you can mix and match to suit your needs. Choose from the TX9 beltpack transmitter (which includes an SR-M1 omnidirectional lavalier microphone), the TX-XLR9 Plug-In transmitter, and the HU9 handheld wireless microphone.
- Two channel wireless UHF receiver built into a single, ultra-compact and ultra-portable body that works with two transmitters at the same time and provides pristine, broadcast-quality sound
- Mounts directly to an XLR input on professional video cameras, mixers or recorders and provides reliable broadcast-quality sound, features durable metal construction
- Includes hardware to mount to DSLR, Mirrorless and Video Cameras and plug into 1/8“ (3.5mm) mic inputs, rotates 320° to make room for other equipment
- Built-in headphone output so you monitor your sound, even when your camera lacks a headphone jack, easy-to-read backlit LCD display
- Offers up to 330-ft (100m) operating distance, not impacted by the FCC’s ban of the 600 MHz frequencies
Specifications:
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Receiver Output Connector: 3-Pin XLR Male
Output Cable: 1/8” (3.5mm) TRS Output Cable
Antenna: 1/4 λwire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Receiver Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Reference Audio Input Level: -60dBV (MIC Input, 0dB Attenuation)
Batteries: 2 LR6/AA size batteries
Dimensions: 4.4 x 2.48 x 1.02” (112 x 63 x 26mm)
Weight: 3.39 oz (96g) (without batteries)
HU9 Transmitter
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Polar Pattern: Cardioid
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 10 x 2.05 x 2.05” (254 x 52 x 52 mm)
Weight: 11.93 oz (338.2g) (without batteries)
In The Box:
1 x Plug-on dual-channel wireless receiver
1 x Camera shoe mount with an integrated metal 1/4 20 tripod thread
1 x 13-inch (33cm) XLR female to gold-plated 1/8“ (3.5) TRS male cable
1 x 4-ft (1.2m) gold-plated USB-C to USB-A cable
1 x Printed user manual
1 x Warranty card
Optional Accessories (Sold Separately):
- TX9 Belt-pack Transmitter with Lavalier
- TX-XLR9 Transmitter: XLR Plug-on Transmitter with +48V phantom power
- HU9 Transmitter: Wireless Handheld Microphone
- SR-UC-201 3.5mm Female TRS Microphone Adapter Cable to 3.5mm Male TRRS for smartphone or tablets
- SR-25C35 3.5mm to 2.5mm Microphone Output Cable for SSE with Fuji Cameras
Saramonic VWS Professional Windshield & Suspension System (Zeppelin/Blimp) for Shotgun & Pencil Microphones
$ 249.00
Saramonic VWS Professional Windshield & Suspension System (Zeppelin/Blimp) for Shotgun & Pencil Microphones
MFR SKU: VWS | Helix SKU: SRVWS
Overview
The Saramonic VWS is a professional windshield and suspension system for shotgun and pencil microphones that gives you the ability to capture clean-sounding audio in extreme weather conditions. The advanced shock mount suspension system eliminates unwanted vibration and handling noise and performs excellently when used outdoors in high winds, or when used indoors for interior boom pole work, stand usage, or when used handheld with the pistol-grip handle. This is the ideal blimp solution for the Saramonic TM1, TM7, and NV5 shotgun microphones, but it can also perfectly accommodate almost every industry standard shotgun and pencil microphone, up to 14.9” (380mm) in length with a diameter of 0.75-0.91” (19-23mm).
The overall angle of the shock mount and blimp can quickly be adjusted to optimize the position of the microphone. A short, coiled XLR cable is built into the handle and shock mount unit to make it easy to connect microphones without concerning yourself with cable routing. The internal cabling also helps to create a seamless structure to diffuse rushing wind. An acoustically transparent furry windscreen acts as the external layer of the VMS, and it can easily be removed for use in milder environments. A 3/8“ thread at the base of the handle enables you to attach the VMS to boom poles, like the Saramonic Magic Boom Pole, and the 1/4” 20 thread adapter is also included to give you near limitless mounting options.
If your productions move rapidly from interior to exterior shots, the VMS can quickly be modified for those tasks. The rear and front domes of the are easily removable, and an integrated slide rail lets you quickly take off the main blimp housing. Likewise, the system is easy to break down and pack at the end of a shoot, and a carrying pouch is included for convenient storage and transport. All of the components are ultra-lightweight, so they won’t weigh you down when you’re working or moving your gear. The Saramonic VWS enables you to confidently achieve professional-level sound quality in adverse outdoor conditions with a wide variety of shotgun microphones at a remarkably budget-friendly price.
- High-wind protection for using shotgun and pencil microphones outdoors with premium suspension shock mount that eliminates vibration and handling noise when used indoors and out
- For use on boom poles and stands, integrated handle for handheld pistol-grip usage, internal coiled XLR cable for easy connection and seamless routing
- Microphone angle is easily adjustable for optimal positioning, you can also adjust the shock mount to accommodate almost every industry standard shotgun microphone
- Ultra-lightweight design, includes acoustically transparent furry exterior layer, carrying pouch, 1/4” 20 tripod thread adapter
- Gives you the ability to capture clean-sounding audio in extreme weather conditions as well as providing a superior shock mount system for both indoor and outdoor use
Specifications:
Internal Cable Connectors: 3-Pin XLR
Internal Spacing: 4.9 x 15.7” (125 x 400mm)
Microphone Compatibility Dimensions: 14.9” (380mm) long, 0.75-0.91” (19-23mm) diameter
Minimum Dimensions: 18.9 x 5.3 x 7.5” (480 x 134 x 190mm)
Maximum Dimensions: 18.9 x 5.3 x 12.4” (480 x 134 x 314mm)
Weight: 1.65lbs (750g)
Smith Victor CM1 Directional condensor microphone w/ shock mount, windscreen and cat tail (401810)
$ 199.95
Smith Victor CM1 Directional condensor microphone w/ shock mount, windscreen and cat tail (401810)
Smith Victor SM1 Stereo microphone w/ shock mount (401820)
$ 99.99
Smith Victor SM1 Stereo microphone w/ shock mount (401820)
Smith-Victor 2.4GHz Wireless Microphone
$ 18.95
Smith-Victor 2.4GHz Wireless Microphone
