Azden 1201 Series System (1201VMX)
$ 1,199.00
Azden 1201VMX Series System
The Azden 1201VMX wireless microphone system combines the 1201URX/VM (V-Mount) receiver with the 1201XT plug-in transmitter.
The Azden 1201URX/VM Receiver comes equipped with a V-Mount adapter for direct mounting on your camera's battery. In addition to the receiver's slot-in design, the 1201-series also offers 188 user selectable, DTV compliant frequencies. True-diversity technology with two complete front-ends and high-gain antennas maximize reception and range while greatly reducing interference and drop-out. The transmitter features a multi-function digital display and rugged construction. 12VDC power is supplied from the camera.
The Azden 1201XT Plug-in Transmitter is designed for use with the 1201 Series receivers. The 1201-series offers 188 user selectable, DTV compliant frequencies. A 3-pin XLR connector accommodates your favorite microphone and provides +48V phantom power if needed. There is a multi-function digital display, and its rugged construction ensures reliable use outdoors, on the road, etc. The transmitter is powered via 2-AA alkaline batteries for up to 8-hours.
Features
- V-Mount battery adapter case
- Plug-in transmitter works w/ any 3-pin XLR mic
- 188 DTV frequencies / 4 UHF TV bands
- True diversity system
- Improved image rejection, S/N ratio & superior diversity isolation
- Multi-function LCD shows channel, frequency, battery info, AF level, and diversity operation
Specifications
1201URX/VM
- RF Carrier Frequency Range: 188 steps ~ 638.125 – 661.875 MHz
- Micro Computer Controlled PLL Synth.
- Noise Reduction: Expander (THAT)
- Effective Operating Range: 200 – 300 ft ~ 60 – 100m
- Frequency Response: 50 – 15kHz (± 1.5dB)
- RF Sensitivity: (12dB SINAD) 1.2μV
- Adjacent Channel Selectivity: > 70dB (± 250kHz)
- Image Rejection: > 93dB
- IF Rejection: > 93dB
- Audio THD: 62dB (± 5kHz Deviation) “A” Weighted
- Power Requirements: 11 – 15V DC @ 220mA
- Dimensions: 82W x 150H x 60D mm – 1201URX/VM
- Operating Temperature Range: -50 – +122 F ~ -10 – +50 C
- Weight: 26.45ounces ~ 750g for 1201URX/VM
1201XT
- Output Power: 30mW
- Max Modulation Sensitivity: +20dBM ~ 0dBm
- MIC Level / Imped. (Dynamic): -60dBm / 2.2kΩ (± 5kHz Dev.)
- Phantom Power: 48V ±2V @ 2mA
- Power Requirements: 3V DC (2 “AA” Alkaline) @ < 180mA – 290 mA w/Phantom Power ON
- Dimensions: 1.57 (W) x 4.49 (H) x 1.57 (D) inches
- 40 (W) x 114 (H) x 40 (D) mm
- Weight w/Battery: 6.35 ounces ~ 180g
In the Box
- 1201URX/VM receiver
- 1201XT plug-in transmitter
- Hardshell carrying case
- Manual
AZDEN WL/T-PRO Pro Series Wireless Lavaliere Microphone and Transmitter #WL/T-PRO
$ 83.89
This Azden microphone is a good choice for indulging you with realistic audio tracks time and time again. It's equal parts comfortable and pro-grade. This Azden microphone is intended for many different uses, which means you are able to use it for speeches, sermons, and ceremonies. Weighing in at 3.4 ounces, this condenser microphone is very light, enabling you to quickly hold it for long periods of time at concerts or recording sessions. The Azden WLT-PRO is extremely sensitive, enabling you to catch all kinds of sounds from the subtle to the loud. Since this Azden microphone includes an omnidirectional pattern, you can pick up your subjects equally well from any direction around the mic. The expanded 50 Hz to 18 kHz frequency response of this condenser microphone helps you to easily catch ultra-low bass notes and crystalline treble tones. Plus, the Azden WLT-PRO is wireless, featuring a 76.2 meter transmit range, which means you are able to benefit from tangle-free performances.
- TRANSMISSION FREQ: F1: 169.445MHz; F2: 170.245MHz
- ANTENNA: Internal Antenna
- MIC UNIT: Omni-Directional Electret -Condensor
- BATTERY: 9V x 1 (not included)
- POWER CONSUMPTION: 30mA
- BATTERY LIFE: 8 to 10 Hours
- DIMENSIONS: 86 x 60 x 21.5 (mm)
- WEIGHT (W/ BATTERY): 98g (3.5oz)
Azden WMS-PRO Wireless Microphone System
$ 158.95
The "all-time" best selling wireless microphone for videography. This versatile system consists of the WM-PRO belt-pack transmitter 2 plug-in electret condenser microphones, a lavalier (EX-503) and handheld (EX-413) and the WR-PRO receiver which comes with both shoe-mount and hook and loop fastener. All receivers and transmitters in the "PRO" Series are on the same 2 frequencies (169.445MHz and 170.245MHz).
RØDELink NewsShooter Kit Digital Wireless System
$ 499.00 - Vendido
RØDELink NewsShooter Kit Digital Wireless System
RØDE SKU: RODElink NewsShooter Kit | Helix SKU: RMRODElinkNewsshooter
Overview
RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RØDELink Newsshooter Kit provides everything you need to start shooting video wirelessly with XLR microphones, including a camera-mounted receiver and an XLR transmitter. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The transmitter (TX-XLR) easily connects to handheld presentation microphones as well as shotgun microphones, with a 3.5mm input and headphone output.
* range estimations based on optimal environment
RØDELink Newsshooter Kit Specifications:
| Transmission type | 2.4GHz Fixed Frequency Agile System |
| System dynamic range | 112dB |
| Range (distance) | Up To 100m |
| Frequency range | 35Hz - 22kHz |
| Maximum output level | 1v Rms (2.8v P-p) |
| Max input signal level | 1v Rms (2.8v P-p) |
| Max latency | 4ms |
| Power source | 2 X AA Battery Or MicroUSB |
| Antenna | Internal |
| Output connection | 3.5mm TRS Locking Jack Socket - Dual Mono |
| Output impedance | 300Ω |
| Dimensions | 111mm X 65mm X 52mm |
| Weight | 190gm |
| Power source | 2 X AA Battery, Sony NP-F Battery Or MicroUSB |
| Antenna | Internal |
| Input connection | XLR With Locking Collar, 3.5mm TRS Locking Jack Socket |
| Input impedance | 1kΩ (XLR), 10kΩ (3.5mm) |
| Dimensions | 120mm X 45mm X 45mm |
| Weight | 222gm |
RØDELink Wireless Filmmaker Kit
$ 399.00 - Vendido
RØDELink Wireless Filmmaker Lavalier Kit
RØDE SKU: RODElink Film Maker Kit | Helix SKU: RMRODEFilmMakerKit
Overview
- Series II, 2.4GHz digital transmission
- 128-bit encryption
- Up to 100 metres range*
- OLED display (on receiver)
- One button pairing
- Three level gain control
- AA battery or USB powered
- Includes broadcast Lavalier microphone
- Two year extended warranty when you register your microphone
RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDE’s omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.
| Transmission type | 2.4GHz Fixed Frequency Agile System |
| System dynamic range | 112dB |
| Range (distance) | Up To 100m |
| Frequency range | 35Hz - 22kHz |
| Maximum output level | 1v Rms (2.8v P-p) |
| Max input signal level | 1v Rms (2.8v P-p) |
| Max latency | 4ms |
| Power source | 2 X AA Battery Or MicroUSB |
| Antenna | Internal |
| Input connection | 3.5mm TRS Locking Jack Socket - Dual Mono |
| Input impedance | 300Ω |
| Dimensions | 111mm X 65mm X 52mm |
| Weight | 190gm |
| Power source | 2 X AA Battery Or MicroUSB |
| Antenna | Internal |
| Input connection | 3.5mm TRS Locking Jack Socket |
| Input impedance | 10kΩ |
| Dimensions | 111mm X 65mm X 40mm |
| Weight | 190gm |
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter |
| Capsule | 0.10" |
| Address Type | End |
| Frequency Range | 60Hz - 18kHz |
| Output Impedance | 3000Ω |
| Maximum SPL | 110dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 189.0mV |
| Sensitivity | -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted) | 25dB-A |
| Weight | 1.00gm |
| Dimensions | 12.00mmH x 4.50mmW x 4.50mmD |
Saramonic TX-XLR9 Plug-on XLR Transmitter for UwMIC9 Digital UHF Wireless Microphone System
$ 149.00
Saramonic TX-XLR9 Plug-on XLR Transmitter for UwMIC9 Digital UHF Wireless Microphone System
MFR SKU: UWMIC9TXXLR9 | Helix SKU: SRUWMIC9TXXLR9
Overview
The Saramonic TX-XLR9 is a wireless UHF plug-on transmitter that makes any kind of XLR microphone wireless and provides stellar, broadcast-quality sound. You can easily attach a handheld interview microphone (such as the Saramonic SR-HM7), or any other kind of XLR microphone and use it wirelessly. The TX-XLR9 can also provide +48V phantom power, allowing you to use any kind of condenser microphone wirelessly, such as the Saramonic SR-TM1 shotgun microphone. It’s ideal for use with DSLRs, video cameras or portable audio recorders for capturing interviews, film dialog, field recording, broadcast TV, news gathering, vlogging, YouTube videos and more. It features sturdy metal construction and delivers excellent sound quality at an affordable price. The TX-XLR9 is ultra-compact, lightweight, and easy to bring with you on every shoot.
The TX-XLR9 is designed to be used with the Saramonic UwMic9 RX9 dual-channel wireless camera-mountable receiver (sold separately). The RX9 enables you to have two on-camera subjects with their own wireless microphones by adding either a TX9 beltpack transmitter and clip-on lavalier microphone, an HU9 Handheld Microphone, or an additional TX-XLR9 transmitter and a handheld XLR microphone.
The TX-XLR9 is built tough with sturdy metal construction, features a locking XLR connector to hold the attached microphone firmly in place, and it syncs with the RX9 receiver wirelessly through easy-to-use infrared sensors. The easy-to-read backlit LCD display lets you make quick adjustments to the intuitive menus in the brightest or darkest environments. The TX-XLR9 can be muted with the press of a button, and a flashing red LED reminds you that it’s muted. The buttons can be “locked” when in use to prevent accidental muting or powering off.
The TX-XLR9 transmitter also features a selectable RF power output. The “Low” setting lets you extend battery life in situations where the subject is close to the receiver. Medium and High are useful when the subject is going to be further away, or when you’re using the TX-XLR9 in an environment with more potential interference. The TX-XLR9 is a high-quality piece of equipment with professional features, excellent sound quality, and an unbeatable budget-friendly price.
- Broadcast-quality UHF wireless plug-on transmitter for the dual-channel RX9 receiver (sold separately)
- Makes any microphone wireless and provides +48v phantom power to condenser microphones
- Works right out of the box with easy plug-and-play operation
- Durable metal construction with Easy-to-read backlit LCD display, easy-to-use menus and controls and locking XLR connector that keeps the connected microphone firmly attached
- Offers up to 330-foot (100m) operating distance with infrared that makes it easy to sync channels with receiver
Channels: 96 selectable channels in 2 groups (A and B)
Wireless Frequency Range: 514 MHz - 596 MHz
Oscillator Type: PLL synthesizer
Input: Locking XLR Connector
Phantom Power: Selectable +48V Phantom Power (On/Off)
Reference audio input level: –60 dBV (MIC input, 0 dB attenuation)
Antenna: 1/4 λwire antenna
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz (-60 dBV, 1 kHz input)
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Batteries: 2 LR6/AA size batteries
Dimensions: 4.15 x 1.69 x 1.37” (105.5 x 43 x 34.7mm)
Weight: 4.87 oz (138g) (without batteries)
In The Box:
1 x TX-XLR9 plug-on transmitter
1 x SR-UMBC1 battery compartment
1 x Printed user manual
1 x Warranty card
Optional Accessories (Sold Separately):
- SR-HM7 Cardioid Dynamic Handheld Interview Microphone
- SR-TM1 Cardioid 11” Cardioid Shotgun Microphone
- SR-TM7 Super-Cardioid 15” Cardioid Shotgun Microphone
- SR-NV5 Cardioid 6.5” Shotgun Microphone
- XLavMic-O Omnidirectional Lavalier with XLR Connector
- XLavMic-C Cardioid Lavalier with XLR Connector
- SR-UMBC1 Replacement Battery Compartment
- SR-RX9 UwMic9 Dual-Channel Camera-Mountable Receiver
Saramonic Vmic Mini Shotgun Microphone
$ 59.00
Saramonic Vmic Mini Shotgun Microphone
MFR SKU: VMICMINI| Helix SKU: SRVMICMINI
Overview
The Saramonic Vmic Mini is an extremely compact and lightweight mini-shotgun microphone that mounts directly to DSLR, mirrorless, and video cameras and enables you to easily capture broadcast-quality sound. It can also be connected to smartphones and tablets with an included cable and dramatically improves the sound quality of your mobile productions.
The all metal construction and precision cut body of this microphone is a work of art. The size makes it ideal for use with small format DSLR, Mirrorless and video cameras as well as smaller mobile devices. Its ultra-compact size allows the mic to be placed in areas that larger shogun mics just won’t fit.
Using the Vmic Mini is incredibly simple. You just plug it in and you’re done. There are no batteries to install or charge, and there are no buttons or switches to operate. It’s truly plug-and-play. A great choice for anyone creating video content on a budget but looking for high-quality gear. Vmic Mini is a lightweight and ultraportable shotgun microphone that will give all of your videos excellent sound.
A stand out feature of the Vmic Mini design is the unique microphone shockmount. The wiry shockmounts on some competing microphones are flimsy and prone to bending, this can cause some unwanted audio issues and change the way the microphone picks up sound. The integrated shockmount of Vmic Mini is robust and features a sleek, sweeping and stable design.
An advanced uniquely designed bullet like windscreen is included, giving the Vmic Mini its unique and interesting look. It features a sturdy gasket which aids in blocking wind noise, helps to protect the microphone from things like weather and dust, and keeps it securely fastened in place while on the go.
Every aspect of the Vmic Mini’s design is top notch, and the built-in locking camera shoe features a metal 1/4 20 tripod thread at the base that gives you near limitless mounting options. Two output cables are included: one that connects to cameras, and another that connects to the headphone jack of smartphones and tablets. Whether you’re shooting with a powerful DSLR, mirrorless, video cam, tablet or a smartphone, the Vmic Mini is a compact and ultraportable shotgun microphone that will give all of your videos excellent sound.
- Provides clear, broadcast-quality sound to DSLR, Mirrorless and Video Cameras or Smartphones and Tablets
- Easy-to-use with plug-and-play operation and no batteries required for operation
- Sleek camera-mountable design that is lightweight and compact, yet features durable metal construction
- Includes two output cables: one for cameras, one for mobile devices
- Mounts to camera shoes, camera cages, boom poles, tripods, stands and more
Specifications:
Type: 14mm Condenser Microphone
Polar Pattern: Cardioid (Uni-Directional)
Frequency Range: 75Hz - 20kHz
Sensitivity: -35 ±3dB (0dB = 1V/Pa, @ 1kHz)
Maximum Input SPL: f=1kHz, THD<5% (105dB)
Output Impedance: 200ohm
Signal to Noise Ratio: 75dB SPL
Weight: 2.43oz (69g)
Dimensions: 4.61 x 0.75 x 2.44” (117 x 19 x 62mm)
In The Box:
1 x Mini shotgun microphone with integrated shockmount
1 x Fitted foam windscreen
1 x Short coiled 1/8“ (3.5 mm) TRS to 1/8“ (3.5 mm) TRS output cable with gold-plated right-angle connectors
1 x Short coiled 1/8“ (3.5 mm) TRS to 1/8“ (3.5 mm) TRRS output cable with gold-plated connector for mobile devices
1 x Information card
1 x Warranty card
Optional Accessories:
- SR-BSP1 Aluminum Smartphone Holder with Stabilizing Handle & Mounting Shoe
- LC-C35 Output Cable: Locking 1/8” (3.5mm) to Lightning cable for iPhone & iPad
- UTC-C35 Output Cable: Locking 1/8” (3.5mm) to USB Type-C cable for Smartphone or Tablets
- USB-CP30 Output Cable: Locking 1/8” (3.5mm) to USB cable PC or Mac computers
- SR-GMC2 Output Cable: 1/8” (3.5mm) to select GoPro cameras
- SR-CS350 Replacement 1/8” (3.5mm) Male Stereo TRS to 1/8” (3.5mm) Male Stereo TRS Output Cable
- SR-PMC2 Replacement Output Cable: 1/8” (3.5mm) to TTRS cable for Smartphone or Tablets
Saramonic VMIC Super-Cardioid Shotgun Condenser Video Microphone for DSLR Cameras - Black
$ 89.00
Saramonic VMIC Super-Cardioid Shotgun Condenser Video Microphone for DSLR Cameras - Black
MFR SKU: VMIC | Helix SKU: SRVMIC
Overview
The Saramonic Vmic is a premium on-camera shotgun microphone that delivers broadcast-quality sound to DSLRs, mirrorless cameras, video cameras and audio recorders and provides a versatile array of features at an affordable price. It has a durable metal construction that will handily survive the demanding world of video production. An impressively robust integrated shockmount isolates the Vmic from unwanted vibration noise. In contrast, the shockmounts on competing shotguns are often flimsy and prone to bending and damage.
Another feature you won’t find on competing shotgun microphones is the built-in headphone output on the Vmic, which always enables you to hear your sound, even when your camera lacks a headphone jack. All of the controls on the Vmic are easy to use and easy to access. It has a +20dB boost setting that lets you to turn down your camera’s noisy preamp in order to achieve an ultra-clean sound as well as letting you pick up subjects from further away. The -10dB setting lowers the sensitivity of the Vmic so you can cleanly capture audio in loud environments. A low-cut switch makes dialog more intelligible and eliminates unwanted deep bass sounds, like distracting vibration noises from footsteps. A high-frequency boost setting enhances the sharpness and clarity of the sounds you capture.
A short, coiled output cable is included to connect to your camera or recorder. This cable is easily removable which allows you to use any 1/8“ (3.5mm) cable in its place. When you need more length than the included 8-inch cable provides, you can easily swap it out for a longer one. A foam windscreen is included for indoor use, and for outdoor recording in higher winds you can use the VMIC-WS fitted furry windscreen that was designed for the Vmic (sold separately). The Vmic is an excellent sounding shotgun microphone that outperforms competing products that are considerably more expensive and doesn’t have the compromises of microphones that are similarly priced.
- Broadcast-quality on-camera shotgun microphone with built-in headphone jack, removable output cable, durable metal construction, and robust integrated shockmount
- Incredibly easy to use with a versatile array of features, +20dB boost switch for achieving ultra-clean sound, -10dB switch for cleanly capturing loud sounds
- Low-cut setting makes dialog more intelligible and eliminates distracting rumble sounds, high-frequency boost setting enhances sharpness and clarity
- Integrated camera-shoe mount features a metal 1/4 20 tripod thread, shockmount is rugged and robust, not flimsy or prone to bending and damage
- Runs on 2 standard AA batteries with a battery door that’s easy to access and use
Specifications:
Type of Microphone: Condenser (Unidirectional)
Polar Pattern: Supercardioid
Signal to Noise Ratio: 75 dB or more
Output Impedance: 200 Ohms or less
Sensitivity: -40 dB at 1 kHz
Filter: High-pass 150 Hz
Outputs: 2 x female 1.8” (3.5 mm), 1 for headphones, 1 for camera connection
Battery: 2 x AA (Alkaline or Lithium)
Dimensions: 10.2 x 2.60" (259.08 x 66 mm)
Weight: 6.9 oz (196 g)
In The Box:
1 x shotgun microphone
1 x short, coiled cable with gold-plated mini-plug connectors
1 x foam windscreen
1 x printed manual
1 x warranty card
Optional Accessories (Sold Separately):
- VMIC-WS Outdoor high-wind furry windscreen
- SR-UC-201 1/8“ (3.5mm) Female TRS microphone adapter cable to 3.5mm male TRRS for smartphones and tablets with a headphone jack
- WM4C-C35 Replacement 1/8“ (3.5mm) male stereo TRS to 3.5mm male stereo TRS output connector cable
- SR-CS350 2-Pack of replacement 1/8“ (3.5mm) male stereo TRS to 3.5mm male stereo TRS output connector cables
- SR-SM-C301 1/8“ (3.5mm) output cable for iOS
- SR-SM-C302 1/8“ (3.5mm) output cable for Android
- LC-C35 Locking 1/8“ (3.5mm) to Lightning output cable for iPhone & iPad
- UTC-C35 Locking 1/8“ (3.5mm) to USB Type-C output cable for smartphones, tablets and Apple computers with USB Type-C
- SR-PMC2 1/8“ (3.5mm) TRS to 1/8“ (3.5mm) TRRS output cable for smartphones and tablets
- SR-GMC2 1/8“ (3.5mm) TRS to select GoPro camera output cable
- USB-C201 Locking 1/8“ (3.5mm) TRS to USB output cable for PC and Mac computers
WM/T-PRO Series VHF Wireless Handheld Microphone / Transmitter (169.445MHz and 170.245MHz)
$ 114.95 - Vendido
The WM/T-PRO is a handheld microphone with a built-in transmitter. It transmits on the standard “PRO” frequencies (169.445MHz and 170.245MHz) and is compatible with all PRO Series receivers. The WM/T-PRO has a standby switch to mute audio and a rubberized coating to reduce handling noise. Runs on a single “AA” battery for up to 10 hours of continuous use.
- TRANSMISSION FREQUENCY: F1: 169.445MHz; F2: 170.245MHz
- ANTENNA: Internal Antenna
- MIC UNIT: Unidirectional Dynamic
- BATTERY: 1.5V (AA) x 1 (not included)
- POWER CONSUMPTION: 100mA
- RF OUTPUT: 10mW
- IMPEDANCE: 8 k ohms
- BATTERY LIFE: 8 to 10 Hours
- DIMENSIONS: 62mm (Ø) x 211 mm – (2.4″ x 8.3″)
- WEIGHT (including battery): 170g (6.0 oz)
