Kupo 3/8-Inch-16 F to 1/4-Inch-20 M Adapter, KG003912
$ 5.39
The KG003912 is a small adapter that converts a 3/8-16 male thread to a 1/4-20 male thread. The KG003912 is made from brass.
Kupo 4 Way Clamp, for 1.4-2.0-Inch (35 to 50mm) Tube, KG900712
$ 54.95 - Vendido
The 4 Way Clamp is another ingenious Kupo innovation. This all metal cast aluminum clamp features a unique spring locking mechanism that allows you to instantly latch and release the locking collar around any tubing sized from 1.4 -2.0 (35 -50mm) in diameter. Just a quick turn of the tension handle to secure it in place and your ready to mount any light fixture or accessory up to 66 lbs (30 Kg) to light stands, scaffolds or Kupoles in a snap! The 4 Way Clamp has four recessed mounting locations distributed in 90 degree increments to accept a series of interchangeable accessories.
Kupo 4-1/2-Inch Grip Head with 1-1/8-Inch Stud and Receiver, KG400512
$ 69.95
The 4-1/2 Grip Head, KG400512 consists of a pair of rotating aluminum discs attached to a junior 1-1/8 (28mm) stud and receiver. The discs have two different sized V shaped jaws to accept any accessory with a 5/8 or 3/8 mounting stud or tubing. The V shaped jaws have teeth that grab whatever is mounted between the plates securely. The KG400512 uses a non-slip aluminum friction disc that will maintain its durability over time that offers the user positive locking strength and precise control. The cine industry also refers to it as a lollipop. When you need to crank down on a large overhead frame to hold it in place, this is the grip head for the job. The KG400512 is designed to convert a junior stand with a combo head into an overhead stand.
Kupo 4-Inch (10cm) Super Viser Clamp with Hex Receiver - End Jaw, KG601512 (NLA)
$ 50.00
The Super Viser is an extremely strong and versatile clamp. It can mount securely onto round and square objects, or just about any unique shape up to 4 (11cm) in diameter. The jaw position remains fixed on one side of the clamp, enabling it to be mounted where limited space is available. The specially formulated grip pad provides a strong grip, yet protects the surface it's clamped around. Another Kupo innovation outfits this clamp with a hexagonal receiver that accepts the full compliment of Convi Clamp accessories. The Super Viser boasts an impressive load capacity of 66.1 lbs (30 Kg) and comes in a silver aluminum finish.
Kupo 40" Master C-Stand with Sliding Leg - Black
$ 149.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Master C-Stand with Sliding Leg - Silver
$ 149.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Master C-Stand with Turtle Base - Black
$ 169.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Master C-Stand with Turtle Base - Silver
$ 169.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Sliding Leg Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Black
$ 211.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Sliding Leg Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Silver
$ 211.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Sliding Base has two legs that are spring loaded to open in fixed positions, while the third leg is height adjustable by loosening a locking knob and sliding it up and down the main riser section. This enables the user to raise one leg higher than the others to level out the stand on an incline or uneven terrain. It comes in really handy on some stairs! C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment or easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Turtle Base Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Black
$ 236.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40" Turtle Base Kit (Stand, 2.5" Grip Head & 40" Grip Arm with Hex Stud) - Silver
$ 236.95
Century Stands or more commonly known as, "C" Stands, have been the most common type of grip equipment used by the filmmaking industry for decades due to their strength and flexibility. Used on its own or in combination with a grip head and grip arm, the C-Stand is used for mounting lighting equipment and a whole variety of light shaping tools and accessories. The Kupo Master C-Stand with Turtle Base features a unique innovation in the world of C-Stands that enables the still or moving image-maker of any skill level to open and collapse the legs of the base in under two seconds! The Master C-Stand is outfitted with a patented spring ring locking system that removes all tension from the legs so that gravity can do the work for you. A "turtle base" is an industry term where the riser section can be quickly removed from the base for easy transportation and the base can be used with a stand adapter for a low mounting position.C-Stands get their sizing from the length of their riser sections. This 40" double riser stand has two telescoping risers and one main section for a total of 120". Add the height of the base and you arrive at your maximum height All Century Stands feature a unique base specially designed with three varied leg heights. This enables the user to stack or "nest" the stand bases so that the risers are just inches apart from one another for use in close proximity mounting of lights and other grip equipment and easy storage. The Master C-Stand features a zinc alloy casting on its base that's five times stronger than aluminum to sustain the weight of heavy sandbags and people standing on it. The hollow junior pin receiver allows debris to pass through for easier cleaning and maintenance. The aluminum casted locking collars are outfitted with a stainless steel heli-coil that protects the aluminum from being damaged by the knob's stainless steel bolt for strength and durability.
Kupo 40-Inch Extension Grip Arm with Big Handle
$ 44.95
Kupo 40-Inch Extension Grip Arm with Big Handle
Kupo 40-Inch Hex Grip Arm with Big Handle
$ 53.95
Kupo 40-Inch Hex Grip Arm with Big Handle
Kupo 5/8 Inches (16mm) Receiver
$ 12.95
Kupo 5/8 Inches (16mm) Receiver
Kupo 6 Inches (15cm) Chain Clamp with Dual Baby, 5/8 Inches (16mm) Studs KG600412
$ 69.95
This clamp consists of a locking pair of pliers with a 6" length of chain that can be wrapped around odd shaped objects such as a tree branch.
Kupo 75cm long PVC Coated Safety Wire - 3.5mm Diameter, KG060912
$ 10.69
Safety cables are recommended when supporting lights, cameras or accessories from the ceiling in case they unexpectedly come loose from where they are mounted. The KG060912 is a lightweight stainless steel cable coated with PVC. It is 29.52 (75cm) long, and has a diameter of 0.13 (3.5mm) with a load rating of 22lbs (10Kg). The KG060912 comes equipped with a carabiner closure.
Kupo Apple Box - Full - 20"x12"x8"
$ 49.95 - Vendido
Kupo Apple Box - Full - 20"x12"x8"
Kupo SKU: KG087311 | Helix SKU: KUKG087311
Overview
The wooden apple box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling dolly track, giving short people a boost, a quick stool for a weary grip, a workbench, a mounting platform, etc. They come in four standard sizes that are fractions of a standard full apple box which is 20" x 12" x 8". Two halves make a full, four quarters make a full and eight pancakes make a full.
Kupo's Apple Boxes are made from high quality nine ply Baltic Birch. Central bracing for increased strength and durability and rounded edges that are easy on the hands. Natural Finish.
*Full Apple Box only.
Specifications
20" x 12" x 8"
Kupo Apple Box - Half - 20"x12"x4"
$ 42.95
Kupo Apple Box - Half - 20"x12"x4"
Kupo SKU: KG087211 | Helix SKU: KUKG087211
Overview
The wooden apple box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling dolly track, giving short people a boost, a quick stool for a weary grip, a workbench, a mounting platform, etc. They come in four standard sizes that are fractions of a standard full apple box which is 20" x 12" x 8". Two halves make a full, four quarters make a full and eight pancakes make a full.
Kupo's Apple Boxes are made from high quality nine ply Baltic Birch. Central bracing for increased strength and durability and rounded edges that are easy on the hands. Natural Finish.
Specifications
The half apple box measures 20" x 12" x 4".
Kupo Apple Box - Pancake - 20"x12"x1"
$ 26.95
Kupo Apple Box - Pancake - 20"x12"x1"
Kupo SKU: KG087011 | Helix SKU: KUKG087011
Overview
The wooden apple box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling dolly track, giving short people a boost, a quick stool for a weary grip, a workbench, a mounting platform, etc. They come in four standard sizes that are fractions of a standard full apple box which is 20" x 12" x 8". Two halves make a full, four quarters make a full and eight pancakes make a full.
Kupo's Apple Boxes are made from high quality nine ply Baltic Birch. Central bracing for increased strength and durability and rounded edges that are easy on the hands. Natural Finish.
The pancake, technically an eighth apple box, measures 20" x 12" x 1". When every inch counts, the pancake is there to lend a hand.
Specifications
Kupo Apple Box - Quarter - 20"x12"x2"
$ 33.95
Kupo Apple Box - Quarter - 20"x12"x2"
Kupo SKU: KG087111 | Helix SKU: KUKG087111
Overview
The wooden apple box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling dolly track, giving short people a boost, a quick stool for a weary grip, a workbench, a mounting platform, etc. They come in four standard sizes that are fractions of a standard full apple box which is 20" x 12" x 8". Two halves make a full, four quarters make a full and eight pancakes make a full.
Kupo's Apple Boxes are made from high quality nine ply Baltic Birch. Central bracing for increased strength and durability and rounded edges that are easy on the hands. Natural Finish.
Specifications
The quarter apple box, measures 20" x 12" x 2".
Kupo Articulated Arm with Baby 5/8 Inches (16mm) Stud with 3/8 Inches-16F KG300512
$ 72.95
his Convi Clamp accessory is multi-segment five-section arm with four double ball joints, each with a locking knob for precise manipulation of each of the joints. The two end segments are shorter than the three center segments. One end has a baby 5/8" (16mm) stud tapped with a 3/8"-16 thread and the other has a hex stud for mounting in a Convi Clamp.
Kupo Baby 5/8 Inches (16mm) Offset Arm KG006512
$ 32.95
This 15" (38 cm) arm consists of a baby receiver on one side and two opposing baby studs on the other. It is used to position a light fixture or accessory away from the light stand. Perfect for hiding your light stand behind a background or set wall.
Kupo Baby 5/8 Inches (16mm) Snap-In Pin KG000112
$ 8.49
This Convi Clamp accessory has a hex stud on one side and baby stud the other for mounting light fixtures or any other piece of grip equipment or accessory with a baby receiver. These babies are generally bought by the handful and considered a "must have" item in your grip bag.
Kupo Baby 5/8-Inch (16mm) Receiver for 3 & 4 Way Clamp, KG005912
$ 15.49
This baby 5/8 (16mm) receiver quickly attaches to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG900712) to accept any light fixture or accessory with a baby (5/8 - 16mm) stud. All accessories for the 3 4 Way Clamp System have a proprietary notch that slides into one of the mounting locations and then is secured by turning the locking collar.
Kupo Baby 5/8-Inch (16mm) Side Arm KG809712
$ 69.95
This arm consists of a heavy-duty clamp on one side and opposing double baby (5/8" - 16mm) pins on the other. It can be mounted quickly to the riser section of a light stand at any height to accept a light fixture or any accessory with a baby receiver.
Kupo Baby 5/8-Inch (16mm) Stud, 108mm long for 3 & 4 Way Clamp, KG005512
$ 14.95
This baby 5/8 (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG900712) to accept any light fixture or accessory with a baby (5/8 - 16mm) receiver. All accessories for the 3 4 Way Clamp System have a proprietary notch that slides into one of the mounting locations and then is secured by turning the locking collar. The KG005512 is 4.25 (108mm) long.
Kupo Baby 5/8-Inch (16mm) Stud, 66mm long for 3 & 4 Way Clamp, KG005712
$ 13.95
This baby 5/8 (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG900712) to accept any light fixture or accessory with a baby (5/8 - 16mm) receiver. All accessories for the 3 4 Way Clamp System have a proprietary notch that slides into one of the mounting locations and then is secured by turning the locking collar. The KG005712 is 2.6 (66mm) long.
Kupo Baby Boom - Steel, KG601612
$ 110.95
A boom is an essential tool for positioning a light fixture either directly above the photographer, videographer or cinematographer to create a beautiful flat light, or positioned above the subject acting as a hair light, etc. This all metal, steel construction boom features an ear that is designed to fit between the plates of a grip head. It comes equipped with a built in hook at the tail end for adding sandbags for counter-weight. This boom extends from 3.8 -7.8' (1.1 -2.4m) and will support 11 lbs (5 Kg) when fully extended. The Steel Baby Boom comes in a chrome plated steel finish.
Kupo Baby Drop Ceiling Adapter, 5/8 Inches (16mm) Stud KD302112
$ 12.95
This adapter is a favorite for trying to find a suitable mounting point on drop ceilings. The male version of this adapter features a 5/8" baby stud for mounting light fixtures or any accessory with a 5/8" (16mm) receiver.
Kupo Baby Drop Ceiling Mount, Baby 5/8-Inch (16mm) Receiver, KD302012
$ 26.95
This adapter is a favorite for trying to find a suitable mounting point on drop ceilings. The drop ceiling mount, also commonly called a scissor mount, attaches to an intersection in the metal grid that supports the tiles. It remains a must have accessory for shooting in office buildings. The KD302012 features a 5/8 (16mm) receiver with metal locking knob will accept any light fixture or accessory with a 5/8 (16mm) stud.
Kupo Baby Kit Stand, KS140511
$ 135.95
This stand may be called a baby, but don't let its name fool you! This stand will reach an impressive height of just over 12.5' (3.85 m). Besides it's impressive height it also has a load capacity of 19.8 lbs (9 Kg). In addition to all the quality details that makes Kupo stand out from other brands, this stand has the mounting stud welded directly to the top riser increasing it's strength and durability, not to mention a nice clean look.
Kupo Background Paper Drive Set
$ 59.95
Kupo Background Paper Drive Set
Kupo SKU: KG084411 | Helix SKU: KUKG084411
Overview
The Background Paper Drive Set is a pair of adapters that expand and lock securely inside the core of a roll of seamless paper. One adapter has a plastic cog that accepts a plastic drive chain so that you can adjust the length of your background comfortably and a tension control so the background doesn't unroll by itself due to gravity.
Kupo Backlite Base Stand, KS040211
$ 27.95
The Fold Away Backlite Stand is a great addition to your stand bag. This small but mighty stand brings your lighting fixtures or cameras a mere 3.5 inches (9 cm) above the ground. The solid steel construction will support a hefty 33 lbs (15 Kg) and folds up in a jiffy for easy transport and storage. This stand is accompanied by the Kupo KS-017 Universal Reversible Stud Adapter allowing you to mount lighting fixtures, various grip equipment directly and cameras with the addition of the Kupo KS-CB01 camera platform.
Kupo Camera/Umbrella Bracket, KG006411
$ 15.95
The KG006411 Camera / Umbrella Bracket is a handy accessory. It features two baby 5/8 (16 mm) receivers and a smaller receiver for an umbrella shaft. The KG006411 comes with a 1/4-20 camera mounting screw and a locking collar to tighten the camera against the bracket. This bracket will allow you to mount your camera on virtually any piece of grip equipment. The KG006411 is clad in a stealthy black finish.
Kupo Convi Clamp Saddle KG703411
$ 3.19
This Convi Clamp accessory is a durable triangular plastic wedge that presses into the jaw of any Convi Clamp to enable the clamp to be mounted securely on flat surfaces.
Kupo Convi Clamp with Adjustable Handle
$ 27.95
Kupo Convi Clamp with Adjustable Handle
Kupo Double Ball Joint Adapter with Dual 5/8 Inches (16mm) Studs
$ 39.95
Kupo Double Ball Joint Adapter with Dual 5/8 Inches (16mm) Studs
Kupo Double Sided Hex Joining Stud KG006812
$ 8.49
This Convi Clamp accessory is a solid steel short stud with two opposing hex studs for joining two Convi Clamps back to back.
Kupo Double Sided Joining Stud, 90/45 Degree Offset KG006912
$ 8.49
This Convi Clamp accessory is made from solid steel and features two opposing hex studs with the flat surfaces in 45 degree increments so that two Convi Clamps can be joined back to back at right or repeatable angles.
Kupo EZ Grip Finger with Baby 5/8 Inches (16mm) Stud & Receiver KG300612
$ 44.95
This adapter consists of a 5/8" (16mm) Stud on one side and a 5/8" (16mm Receiver) on the other connected by a large ball joint. The baby receiver has a metal knob to lock it securely in place.
Kupo EZ-TIE Deluxe Cable Ties
$ 13.95
Kupo EZ-TIE Deluxe Cable Ties
Kupo Foamcore Fork with Baby, 5/8 Inches (16mm) Stud KG600611
$ 24.95
The Foam Core Fork stabs into the foam center and then the stud is placed in a grip arm or any other 5/8" baby receiver to be positioned anywhere as a reflector to bounce light or flag to block it.
Kupo Folding Base Mini Stand, KS040111
$ 54.95
The Folding Base Mini Stand is a combination of the Kupo Fold Away Backlite Stand (KS040111) and the Kupo Folding Mini Stand Pole, an adjustable 2 riser, 1 section aluminum pole for variable height adjustment from 22.4 - 33.5 in (57 - 85 cm). This combination makes one of the most versatile stands to hide background light behind the subject being photographed.
