Rhino Focus Lens Gear
$ 15.00
Rhino Focus Lens Gear
This rubber lens gear wraps around any photography lens and creates a .8 pitch gear for manual focus pulling.
Features
- Flexible rubber securely grips the focus ring
-
Adjustable for all photography lenses
In the box
- Focus Lens Gear
Rhino Focus Motor Cable
$ 10.00
Rhino Focus Motor Cable
This cable is designed to connect Rhino Focus to Rhino Arc II
Features
-
Ultra strong, gold plated connector
Specs
-
RJ45 Connector
In the box
- Focus Motor Cable
Rhino High Torque Motor
$ 300.00
Rhino High Torque Motor
Achieve vertical slides with up to a 10lb payload with the new High Torque Motor. It attaches onto the end plate of any Rhino Slider (Compatible with both EVO and the new version) in a few seconds. Connect it to Rhino Arc II with the included RJ45 cable and start automating your camera movement.
Features
- Capable of moving a 10lb load at a 90 degree angle (motor must be on the top end of the slider)
- Moves your Rhino Slider carriage at 1”/second
- Installs in seconds
- Super low profile
- Doesn’t have to be removed to fit in Rhino soft shell carrying cases
In the box
- High Speed Motor
- 24” Motor Cable
- 42” Motor Cable
- Rhino branded box
Rhino Motor Cable 24"
$ 10.00
Rhino Motor Cable 24"
This cable is designed to connect Rhino Arc II to the Rhino Motor while using a 24” Rhino Slider.
Features
- Ultra strong, gold plated connector
-
Right angle connector plugs in to Rhino Arc II for better cable management
Specs
-
RJ45 Connector
In the box
- Motor Cable 24”
Rhino Motor Cable 42"
$ 15.00 - Vendido
Rhino Motor Cable 42"
This cable is designed to connect Rhino Arc II to the Rhino Motor while using a 42” Rhino Slider.
Features
- Ultra strong, gold plated connector
-
Right angle connector plugs in to Rhino Arc II for better cable management
Specs
-
RJ45 Connector
In the box
- Motor Cable 42”
Rhino Power Adapter - Canon
$ 30.00
Rhino Power Adapter - Canon
The Rhino Power Adapter powers your Canon camera when connected to Rhino Arc II. This allows to you film and interview or a time-lapse and not have to worry about charging your gear. If you’re filming for extensive periods, you just have to charge one thing: Rhino Arc II.
Note: It is normal for your battery light to flash when connected to some external power sources.
Compatible with Canon: 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 60D, 60Da, 70D,
80D, 6D, 6D Mark II, 7D, 7D Mark II, 7DSV, XC15 4K, XC10 4K
Features
- Power your camera with Rhino Arc II
In the box
- Rhino Power Adapter - Canon
Rhino Power Adapter - Fujifilm
$ 30.00
Rhino Power Adapter - Fujifilm
The Rhino Power Adapter powers your Fujifilm camera when connected to Rhino Arc II. This allows to you film and interview or a time-lapse and not have to worry about charging your gear. If you’re filming for extensive periods, you just have to charge one thing: Rhino Arc II.
Note: It is normal for your battery light to flash when connected to some external power sources.
Compatible with: X-H1, X-Pro2, X-Pro1, X-T3, X-T2, X-T1, X100F, X-T20, X-T10, X-T100, X-E3, X-E2S, X-E2, X-E1, X-M1, X-A5, X-A3, X-A2, X-A1, X-A10, FinePix HS50EXR, FinePix HS33EXR, FinePix HS30EXR
Features
- Power your camera with Rhino Arc II
In the box
- Rhino Power Adapter - Fujifilm
Rhino Power Adapter - Nikon
$ 30.00
Rhino Power Adapter - Nikon
The Rhino Power Adapter powers your Nikon camera when connected to Rhino Arc II. This allows to you film and interview or a time-lapse and not have to worry about charging your gear. If you’re filming for extensive periods, you just have to charge one thing: Rhino Arc II.
Note: It is normal for your battery light to flash when connected to some external power sources.
Compatible with: D7500, D7200, D7100, D7000, D850, D810A, D810, D800E, D800, D750, D610, and D500
Features
- Power your camera with Rhino Arc II
In the box
- Rhino Power Adapter - Nikon
Rhino Power Adapter - Panasonic
$ 30.00
Rhino Power Adapter - Panasonic
The Rhino Power Adapter powers your Panasonic camera when connected to Rhino Arc II. This allows to you film and interview or a time-lapse and not have to worry about charging your gear. If you’re filming for extensive periods, you just have to charge one thing: Rhino Arc II.
Note: It is normal for your battery light to flash when connected to some external power sources.
Compatible with: GH3, GH4, and GH5
Features
- Power your camera with Rhino Arc II
In the box
- Rhino Power Adapter - Panasonic
Rhino Power Adapter - Sony
$ 30.00
Rhino Power Adapter - Sony
The Rhino Power Adapter powers your Sony camera when connected to Rhino Arc II. This allows to you film and interview or a time-lapse and not have to worry about charging your gear. If you’re filming for extensive periods, you just have to charge one thing: Rhino Arc II.
Note: It is normal for your battery light to flash when connected to some external power sources.
Compatible with: Sony Alpha NEX-3, 5, 6 and 7 Series Cameras, DSLR-SLT-A33, DSLR-SLT-A55
Features
- Power your camera with Rhino Arc II
In the box
- Rhino Power Adapter - Sony
Rhino Power Adapter - Sony II
$ 30.00 - Vendido
Rhino Power Adapter - Sony II
The Rhino Power Adapter powers your Sony camera when connected to Rhino Arc II. This allows to you film and interview or a time-lapse and not have to worry about charging your gear. If you’re filming for extensive periods, you just have to charge one thing: Rhino Arc II.
Note: It is normal for your battery light to flash when connected to some external power sources.
Compatible with: Alpha a9, Alpha a7R III, Alpha a7 III
Features
- Power your camera with Rhino Arc II
In the box
- Rhino Power Adapter - Sony II
Rhino Pro 42" Rails
$ 550.00 - Vendido
Rhino Pro 42" Rails
Interchangeable rails are the heart of the Rhino System. They allow you to completely change the weight, length, and load capacity of your slider setup without having to buy a completely new setup.
The Pro 42” Rails are perfect for interview setups running heavier cameras. Thanks to the new dual Tripod Quick Mount plates they are 5x more torsionally rigid than our previous 42” rails. This makes them much for versatile and less prone to twist when filming with heavy setups.
Weight: 7lbs 2oz
Load Capacity: 30lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around.
Features
- Quickly interchange your rails to transform your slider
- 5x more rigid than our previous version
- Precision ground solid stainless steel
- Includes the new Tripod Quick Mount System
- Easy mounting to dual tripods
In the box
- Pro 42” Rails
Rhino Quick Release Plate
$ 15.00 - Vendido
Rhino Quick Release Plate
This quick release plate fits in the receiver of Rhino Arc II. It has a ¼-20 and ⅜-16 screws for mounting to most DSLR and Cinema cameras.
Features
- Ultra strong, die cast construction
- ¼-20 and ⅜-16 screws
-
Compatible with Manfrotto 501 receivers
In the box
- Quick Release Plate
Rhino Rhino Arc II
$ 1,400.00
Rhino Rhino Arc II
Rhino SKU: SKU205 | Helix SKU:RHSKU205
Overview
Rhino Arc II is a compact 4-axis motorized pan/tilt/focus head that enables you to capture unreal video and time-lapse shots. It can hold up to 15lbs of equipment (camera + lens + monitor, etc) and can mount to a tripod or to your Rhino Slider.
Features
- 15lb load capacity
- Stand-alone functionality lets you replace your fluid head with ultra smooth, repeatable motorized movement
- Optional motorized follow focus (Rhino Focus) for making sure you nail focus
- Optional slider motor (High Torque & High Speed Motor) controls your linear movement
- Capture day to night time-lapses with Lightlapse (iOS only)
- Built-in output for powering your DSLR or Mirrorless (requires optional Rhino Power dummy battery)
- Built-in 501 plate receiver (includes 501 compatible plate)
- OLED screen and dual joysticks for live control over all 4 axis
- iOS app for remotely controlling and more control over keyframes
- Motorized mounting using its pan motor
Features (long form)
- Customizable Keyframing
- The original Rhino Arc could do a 2 point, 2 axis move. Rhino Arc II can do a 5 point, 4 axis move. Use the dual-joystick controls and set your slider position, pan, tilt, and focus and click the joystick. Repeat this up to 5 times and playback with a repeatable, fixed speed move or use the joystick to control the speed of playback.
- Rack Mode
- You don’t always need a slider but you always need b-roll. That’s why we created rack mode. When paired with Rhino Focus, simply move your camera and set your focus. Move to where you think you’ll pan or tilt and set your focus again. Now, as you move, your focus will automatically rack perfectly as you control your movement in real time with the joystick. Imagine how much time you’ll save nailing focus on the first try.
- Interview Mode
- Doing professional interviews is a staple for most freelancers. Adding motion to your camera ups your production value and is a great way to land higher paying gigs. But what happens if your subject changes their sitting position or moves out of focus? With interview mode you can pause the looping slider by touching the joystick on Arc II or in the app and discreetly reframe and refocus without having to setup a new move and risk killing the moment.
- Lightlapse Mode
- It is so frustrating to have to wait to setup your time lapse until dark or have your time lapse cut short by the sunrise. That’s why we created Light Lapse. Using a new iOS app, you’ll be able to capture day to night, Holy Grail time-lapses with the click of a button.
- UI & App
- Having actual physical controls for motion control is super important. What if your phone dies, doesn’t connect, or the app glitches out? Professional work requires extreme reliability. Because of this, you have full control with physical controls to set up Arc. But, some things are just better in an app experience. With the Arc app (iOS), you can setup and playback your move using the virtual joystick. You can create up to 5 key frames and scrub through them for real time remote control.
- Rhino Power
- Changing batteries is a pain. Especially when they only last 45 minutes. That’s why you’re able to power your camera or monitor directly from Rhino Arc. No more changing batteries mid interview or having your camera run out of juice on a long time-lapse.
- Battery Life
- Powering up to 4 motors and a camera takes a lot of power so we built in a massive 60wh battery pack into Arc. It will allow for 5 hours of continuous use with everything powered up and up to 48 hours for time-lapses. If time is tight it charges in less than 2 hours using our ultra fast international charger.
- Mounting Plate
- A lot of filmmakers use the 501 quick release plate for video work so we built a 501 receiver and plate into Arc. The problem with these plates is how to mount them to your camera. We solved this with a easy to access mounting tool built into the receiver. No more looking for keys or coins to mount your 501 plate. Spoiler alert - it doubles as a bottle opener too.
- Motorized Mounting
- Setting up gear is time consuming. So we try to make it as quick as possible. Rhino Arc uses one of its motors to mount to Rhino Slider or a tripod and the mounting tool to snug it in place.
- Specs
- Dimensions: 7” x 4” x 5”
- Weight: 5lbs
- Load Capacity: 15lbs
- Tilt Range: 180° under 8lbs, 90° over 8lbs
- Pan Range: 360°
- In the box
- Rhino branded box
- Rhino Arc II
- Ultra fast international charger
- Mounting tool (built into Arc II)
- Video
- https://youtu.be/lEBfnKh9rG0
Rhino Rhino Focus
$ 300.00
Rhino Focus
Rhino SKU: SKU206 | Helix SKU:RHSKU206
Overview
Rhino Focus is an electronic follow focus that works with Rhino Arc II. It’s a must have accessory that allows you to capture more dynamic shots with perfectly executed focus pulls. It enables you to keyframe your focus when using Arc II on a slider or a tripod.
When using Rack Mode on Arc II you are able to set two focus points and your focus will automatically shift between the points as you pan or tilt in real time. This lets you capture more b-roll in less time by making sure you hit your focus point every time.
Features
- Ultra precise high torque motor
- Installs in seconds
-
15mm carbon fiber rail
Specs
- Dimensions: 4” x 1.5” x 1.5”
- Weight: 9oz
-
Compatibility: .8 gear pitch
In the box
- Rhino Focus
- 1 adjustable rubber lens gear
- Rhino Branded Box
Rhino Rhino Slider Carbon 24"
$ 600.00
Rhino Rhino Slider Carbon 24"
Rhino SKU: SKU201 | Helix SKU: RHSKU201
Overview
Rhino Slider Carbon 24” is the ultimate all-round camera slider. Lightweight yet extremely versatile, it will fit most filmmaker’s needs.
Weight: 4lbs
Load Capacity: 15lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around.
Built around ultra-rigid carbon fiber rails and a precision machined aluminum chassis, it’s the essential building block for your motion control system. Outfit it with either Rhino Flywheel for a quick and smooth setup or Rhino Arc II & Rhino Motor for a complete 3-axis motion control system.
Features
- Tripod Quick Mount System lets you mount your slider to a tripod without spinning it around
- Interchangeable rails let you swap between any of Rhino’s 4 rail options
- Ultra-rigid carbon fiber rails
- Built in belt drive system is compatible with Rhino Flywheel and Rhino Motor
- All-terrain legs let you level your slider on any terrain
- Integrated carriage brake securely locks your carriage at any point on the slider
-
¼-20 and ⅜-16 Tripod threads on end plates and center plate (end plate threads are not accessible if Rhino Motor is mounted)
In the box
- Rhino Slider Carbon 24”
- Rhino branded box
Rhino RŌV PRO - Everyday Slider
$ 400.00 - Vendido
Rhino RŌV PRO - Everyday Slider
Rhino SKU: ROV003 | Helix SKU: RHROV003
Overview
PRODUCT DESCRIPTIONS:
- RŌV PRO (Everyday & Traveler)
- Short Description
- RŌV Pro is an extremely portable, app controlled motorized slider that you’ll actually bring on your next shoot. It’s ultra compact and controlled by your phone with an extremely intuitive app. RŌV Pro even has the ability to capture time lapses seamlessly with a built in intervalometer. Note: RŌV is not currently compatible with iPhone Xs and Xs Max in video mode (using your phone for video). We’re working on an app update to address this.
- Features
- Includes ROV Pro Everyday, Quick Release Ball-head, Smartphone Mount, Variable ND Filter
- Captures ultra smooth cinematic video on your DSLR or Mirrorless camera
- Holds up to a 5lb camera with the included quick release ball mount
- Includes Phone Mount to film b-roll on your smartphone
- Time-lapse mode can capture long exposures at night (optional cable not included)
- Motorized movement with a built in 24 hour rechargeable battery
- Insanely long 24hr battery life
- Fast setup with one touch to start moving
- Premium machined aluminum finish
- Variable speeds
- Looping mode
- Controlled by your phone over Bluetooth
- Features (Long Form)
- The slider you’ll actually take with you
- ROV Pro is an extremely portable, app controlled motorized slider that you’ll actually bring on your next shoot.
- All in one
- Insanely fast setup
- Time-Lapse
- Ditch your bulky gear without compromising quality. ROV Pro has an integrated 2.5mm port for triggering your cameras’ shutter during a time-lapse. Getting a time-lapse has never been easier with the built-in intervalometer. *A shutter release cable is not included and can be purchased separately.
- Versatility
- Build Quality
- A built-in high capacity battery will keep your adventure powered for up to 24 hours of motion.
- Specs
- Specs
- Everyday - 17" L x 4.5" W x 1.5" H 1lb 5oz
- Traveler - 25" L x 4.5" W x 1.5" H 1lb 7oz
- Speeds - Minimum .25in/sec, Maximum 1.42in/sec
- In the box
- RŌV PRO Motorized Slider
- Charging Cable
- Variable ND filter for filming cinematic video on your phone
- Quick Start Guide
Rhino RŌV PRO - Traveler Slider
$ 450.00 - Vendido
Rhino RŌV PRO - Traveler Slider
Rhino SKU: ROV004 | Helix SKU: RHROV004
Overview
PRODUCT DESCRIPTIONS
- RŌV PRO (Everyday & Traveler)
- Short Description
- RŌV Pro is an extremely portable, app controlled motorized slider that you’ll actually bring on your next shoot. It’s ultra compact and controlled by your phone with an extremely intuitive app. RŌV Pro even has the ability to capture time lapses seamlessly with a built in intervalometer.
- Note: RŌV is not currently compatible with iPhone Xs and Xs Max in video mode (using your phone for video). We’re working on an app update to address this.
- Features
- Includes ROV Pro Everyday, Quick Release Ball-head, Smartphone Mount, Variable ND Filter
- Captures ultra smooth cinematic video on your DSLR or Mirrorless camera
- Holds up to a 5lb camera with the included quick release ball mount
- Includes Phone Mount to film b-roll on your smartphone
- Time-lapse mode can capture long exposures at night (optional cable not included)
- Motorized movement with a built in 24 hour rechargeable battery
- Insanely long 24hr battery life
- Fast setup with one touch to start moving
- Premium machined aluminum finish
- Variable speeds
- Looping mode
- Controlled by your phone over Bluetooth
- Features (Long Form)
- The slider you’ll actually take with you
- ROV Pro is an extremely portable, app controlled motorized slider that you’ll actually bring on your next shoot.
- All in one
- Insanely fast setup
- Time-Lapse
- Ditch your bulky gear without compromising quality. ROV Pro has an integrated 2.5mm port for triggering your cameras’ shutter during a time-lapse. Getting a time-lapse has never been easier with the built-in intervalometer. *A shutter release cable is not included and can be purchased separately.
- Versatility
- Build Quality
- A built-in high capacity battery will keep your adventure powered for up to 24 hours of motion.
- Specs
- Specs
- Everyday - 17" L x 4.5" W x 1.5" H 1lb 5oz
- Traveler - 25" L x 4.5" W x 1.5" H 1lb 7oz
- Speeds - Minimum .25in/sec, Maximum 1.42in/sec
- In the box
- RŌV PRO Motorized Slider
- Charging Cable
- Variable ND filter for filming cinematic video on your phone
- Quick Start Guide
Rhino RŌV Smartphone mount
$ 40.00 - Vendido
Rhino RŌV Smartphone mount
Rhino SKU: ROV013 | Helix SKU: RHROV013
Overview
The RŌV Smartphone mount allows you to securely mount your smartphone to any 1/4-20 or 3/8-16 tripod stud or to RŌV Mobile or Pro.
Features:
- An integrated ballhead let's you position your smartphone in any orientation at any angle.
- Built-in cold shoe for mounting lights or mic
Rhino Shutter Cable - Canon
$ 10.00 - Vendido
Rhino Shutter Cable - Canon
Overview
The Rhino shutter release cable connects Rhino motion control products to your camera. This is essential for time-lapse photography which allows you to trigger your camera’s exposure while your camera isn’t moving.
Compatible with Canon EOS: R, M6, M5, 80D, 70D, 60D, 77D (9000D), T7i (800D), T6s (760D), T6i (750D), T6 (1300D), T5i (700D), T5 (1200D), T4i (650D), T3i (600D), T3 (1100D), T2i (550D), T1i (500D), XSi (450D), XTi (400D), XT (350D), XS (1000D), Digital Rebel (300D), SL2 (200D), SL1 (100D), Elan series
PowerShot G1 X Mark III, G1 X Mark II, G1 X, G16, G15, G12, G11, G10, G3 X, G5 X, SX70 HS, SX60 HS, SX50 HS
Contax: N and 645
Fujifilm: X-T3, X-T1, X-E2, X-E1, X100T, X30
Hasselblad: H series
Olympus: OM-D E-M1 Mark II
Pentax: K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D
Samsung: NX10 & NX100; GX-1S, GX-1L, GX-10 & GX-20
Sigma: SD1, SD9, SD10, SD14 & SD15
Features
- Compatible with ROV, Rhino Arc II, Rhino Motion and other products with a 2.5mm shutter jack.
- Gold plated 2.5mm jack
- Rhino blue color with Rhino logo
Includes
- Shutter release cable
Rhino Shutter Cable - Canon Pro
$ 10.00 - Vendido
Rhino Shutter Cable - Canon Pro
The Rhino shutter release cable connects Rhino motion control products to your camera. This is essential for time-lapse photography which allows you to trigger your camera’s exposure while your camera isn’t moving.
Compatible with: Canon EOS: 10D, 20D, 30D, 40D, 50D, 5D, 5D Mark II, 5D Mark III, 5D Mark IV, 5DS, 5DS R, 6D, 6D Mark II, 7D, 7D Mark II, 1D, 1D Mark II, 1D Mark II N, 1D Mark III, 1D Mark IV, 1Ds, 1Ds Mark II, 1Ds Mark III, 1D X and 1D C
Features
- Compatible with ROV, Rhino Arc II, Rhino Motion and other products with a 2.5mm shutter jack.
- Gold plated 2.5mm jack
- Rhino blue color with Rhino logo
Includes
- Shutter release cable
Rhino Shutter Cable - Fujifilm
$ 10.00 - Vendido
Rhino Shutter Cable - Fujifilm
The Rhino shutter release cable connects Rhino motion control products to your camera. This is essential for time-lapse photography which allows you to trigger your camera’s exposure while your camera isn’t moving.
Compatible with: GFX 50S, X-H1, X-Pro2, X-T2, X-T1, X-T20, X-T10, X-E3, X-E2S, X-E2, X-M1, X-A5, X-A3, X-A2, X-A1, X-A10, X100F, X100T, X70, X30, XQ2, XQ1, and FinePix S1
Features
- Compatible with ROV, Rhino Arc II, Rhino Motion and other products with a 2.5mm shutter jack.
- Gold plated 2.5mm jack
- Rhino blue color with Rhino logo
Includes
- Shutter release cable
Rhino Shutter Cable - Nikon
$ 10.00
Rhino Shutter Cable - Nikon
The Rhino shutter release cable connects Rhino motion control products to your camera. This is essential for time-lapse photography which allows you to trigger your camera’s exposure while your camera isn’t moving.
Compatible with: Nikon: D70S and D80
Features
- Compatible with ROV, Rhino Arc II, Rhino Motion and other products with a 2.5mm shutter jack.
- Gold plated 2.5mm jack
- Rhino blue color with Rhino logo
Includes
- Shutter release cable
Rhino Shutter Cable - Nikon Pro
$ 10.00 - Vendido
Rhino Shutter Cable - Nikon Pro
The Rhino shutter release cable connects Rhino motion control products to your camera. This is essential for time-lapse photography which allows you to trigger your camera’s exposure while your camera isn’t moving.
Compatible with: Nikon: D5, D4s, D4, D3x, D3s, D3, D2Xs, D2X, D2Hs, D2H, D2, D1X, D1H, D1 D850, D810, D800, D800e, D700, D500, D300s, D300 & D200
Fuji: S3 & S5
Kodak: DCS-14N
Features
- Compatible with ROV, Rhino Arc II, Rhino Motion and other products with a 2.5mm shutter jack.
- Gold plated 2.5mm jack
- Rhino blue color with Rhino logo
Includes
- Shutter release cable
Rhino Shutter Cable - Olympus
$ 10.00
Rhino Shutter Cable - Olympus
The Rhino shutter release cable connects Rhino motion control products to your camera. This is essential for time-lapse photography which allows you to trigger your camera’s exposure while your camera isn’t moving.
Compatible with: SP-510UZ, SP-550UZ, SP-560UZ, SP-5655UZ, SP-570UZ, SP-590UZ, EP-1, EP-2, E-PL2, E-P3, E-PL3, E-PM1, E-410, E-510, E-520, E-620, E-30, E-M5, E-M10, E-M1, XZ-1, XZ-2, Stylus 1, SP-100EE, SH-60, SH-50, SH-1, SZ-31MR, SZ-30MR, SZ-20, SZ-14, SZ-11, SZ-10, SH-21, SH-25
Features
- Compatible with ROV, Rhino Arc II, Rhino Motion and other products with a 2.5mm shutter jack.
- Gold plated 2.5mm jack
- Rhino blue color with Rhino logo
Includes
- Shutter release cable
Rhino Shutter Cable - Panasonic
$ 10.00
Rhino Shutter Cable - Panasonic
The Rhino shutter release cable connects Rhino motion control products to your camera. This is essential for time-lapse photography which allows you to trigger your camera’s exposure while your camera isn’t moving.
Compatible with Panasonic: DMC-GH5S, DMC-GH5, DMC-GH4, DMC-GH3, DMC-GH2, DMC-GH1, DMC-G9, DMC-G8, DMC-G7, DMC-G6, DMC-G5, DMC-G3, DMC-G2, DMC-G85, DMC-G10, DMC-G1, DMC-GX8, DMC-GX7, DMC-GX1, DMC-L10, DMC-L1, DMC-GF1, DMC-FZ2500, DMC-FZ1000, DMC-FZ300, DMC-FZ200, DMC-FZ150, DMC-FZ100
Leica: V-Lux 4
Features
- Compatible with ROV, Rhino Arc II, Rhino Motion and other products with a 2.5mm shutter jack.
- Gold plated 2.5mm jack
- Rhino blue color with Rhino logo
Includes
- Shutter release cable
Rhino Shutter Cable - Sony
$ 10.00
Rhino Shutter Cable - Sony
The Rhino shutter release cable connects Rhino motion control products to your camera. This is essential for time-lapse photography which allows you to trigger your camera’s exposure while your camera isn’t moving.
Compatible with Sony: Alpha: a9, a7, a7 II, a7 III, a7R, a7R II, a7R III, a7S, a7S II, a6500, a6300, a6000, a5100, a5000, a3000, a99 II, a77 II, a68, a58
Cyber-shot: RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II, HX90V, HX50V, HX400V, HX400, HX300
Features
- Compatible with ROV, Rhino Arc II, Rhino Motion and other products with a 2.5mm shutter jack.
- Gold plated 2.5mm jack
- Rhino blue color with Rhino logo
Includes
- Shutter release cable
Rhino Slider 24" Belt
$ 5.00 - Vendido
Rhino Slider 24" Belt
Rhino SKU: SKU262 | Helix SKU: RHSKU262
Overview
This is the belt for a 24” Rhino Slider. Buy this if you’re looking for a replacement if yours got lost.
In the box
- Rhino Slider 24” Belt
Rhino Slider Carbon 42"
$ 800.00
Rhino Slider Carbon 42"
Rhino SKU: SKU202 | Helix SKU:RHSKU202
Overview
Rhino Slider Carbon 42” is the ultimate time-lapse camera slider. The long yet light rails let you capture more movement for capturing incredible time-lapses.
Specs
Weight: 4lbs 12oz
Load Capacity: 10lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around. The 42” version has 2 extra plates that make mounting to two tripods infinitely easier increase the torsional rigidity by 5x.
Built around ultra-rigid carbon fiber rails and a precision machined aluminum chassis, it’s the essential building block for your motion control system. Outfit it with either Rhino Flywheel for a quick and smooth setup or Rhino Arc II & Rhino Motor for a complete 3-axis motion control system.
Features
- Tripod Quick Mount System lets you mount your slider to a tripod without spinning it around
- Interchangeable rails let you swap between any of Rhino’s 4 rail options
- Ultra-rigid carbon fiber rails
- Built in belt drive system is compatible with Rhino Flywheel and Rhino Motor
- All-terrain legs let you level your slider on any terrain
- Integrated carriage brake securely locks your carriage at any point on the slider
-
¼-20 and ⅜-16 Tripod threads on end plates and center plate (end plate threads are not accessible if Rhino Motor is mounted)
Includes
- Rhino Slider Carbon 42”
- Rhino branded bo
Rhino Slider Carriage Assembly
$ 210.00
Rhino Slider Carriage Assembly
Rhino SKU: SKU236 | Helix SKU: RHSKU236
Overview
Rhino Slider Hard Shell Case
$ 250.00 - Vendido
Rhino Slider Hard Shell Case
The Slider Hard shell case is designed to fit all of your Rhino Slider gear to create stunning 4-axis slider shots. It has dual handles and recessed rollers for easy transportation when traveling. Integrated into the lid are 4 pockets for spare cables, lens gears, batteries, etc.
Fits:
- Rhino Slider (24” or 42”)
- Interchangeable Rails (24” or 42”)
- Rhino Arc II
- Rhino Focus
- Rhino Motor (both High Speed and High Torque)
- Ultra-fast Charger
Features
- Aluminum and composite construction
- Carry and protect all of your Rhino Slider gear
- Airline ready
- Recessed rollers and end handle make it easy to travel with
- High density EVA foam
- 4 pockets let you store accessories safely
- Locking (includes keys)
Includes
- Slider hard shell case
Rhino Slider Left Leg Assembly
$ 30.00
Rhino Slider Left Leg Assembly
Rhino SKU: SKU238 | Helix SKU: RHSKU238
Overview
This is the Left Leg for a Rhino Slider. Buy this if you’re looking for a replacement or if you want to build out a slider from your spare rails.
In the box
- Rhino Slider Left Leg
Rhino Slider Pro 42"
$ 900.00
Rhino Slider Pro 42"
Rhino SKU: SKU204 | Helix SKU:RHSKU204
Overview
Rhino Slider Pro 42” is the go to slider for professional filmmakers. The long, heavy duty rails let you capture more movement for more dynamic interview shots.
Specs
Weight: 11lbs 2oz
Load Capacity: 30lbs
We updated the rails with our new Tripod Quick Mount System that lets you mount your slider to a tripod in less time and without having to awkwardly spin it around. The 42” version has 2 extra plates that make mounting to two tripods infinitely easier and increase the torsional rigidity by 5x.
Built around ultra-rigid carbon fiber rails and a precision machined aluminum chassis, it’s the essential building block for your motion control system. Outfit it with either Rhino Flywheel for a quick and smooth setup or Rhino Arc II & Rhino Motor for a complete 3-axis motion control system.
Features
- Tripod Quick Mount System lets you mount your slider to a tripod without spinning it around
- Interchangeable rails let you swap between any of Rhino’s 4 rail options
- Ultra-rigid stainless steel rails
- Built in belt drive system is compatible with Rhino Flywheel and Rhino Motor
- All-terrain legs let you level your slider on any terrain
- Integrated carriage brake securely locks your carriage at any point on the slider
-
¼-20 and ⅜-16 Tripod threads on end plates and center plate (end plate threads are not accessible if Rhino Motor is mounted)
Includes
- Rhino Slider Pro 42”
- Rhino branded box
Rhino Slider Pulley End Plate Assembly
$ 45.00 - Vendido
Rhino Slider Pulley End Plate Assembly
Rhino SKU: SKU239 | Helix SKU: RHSKU239
Overview
Rhino Slider Right Leg Assembly
$ 30.00
Rhino Slider Right Leg Assembly
Rhino SKU: SKU237 | Helix SKU: RHSKU237
Overview
This is the Right Leg for a Rhino Slider. Buy this if you’re looking for a replacement or if you want to build out a slider from your spare rails.
In the box
- Rhino Slider Right Leg
Rhino Slider Upgrade Kit
$ 350.00
Rhino Slider Upgrade Kit
Rhino SKU: SKU235 | Helix SKU: RHSKU235
Overview
This kit allows you to turn your spare rails into a complete Rhino Slider. If you have an Ultimate Slider Bundle or just an extra set of rails, use this kit to streamline your workflow if you don’t want to swap out rails every time your needs change.
Note: If you don’t have a spare belt with your rails you’ll need to buy one for this kit to be motorized.
In the box
- Rhino Slider Carriage
- Pulley End Plate
- End Plate
- 2x Right Leg
- 2x Left Leg
Rhino Time Lapse Slider Bundle
$ 2,650.00
Rhino Time Lapse Slider Bundle
Rhino SKU: SKU251 | Helix SKU: RHSKU251
Overview
This bundle has everything you need to start time-lapsing like a pro. The ultralight 42” Carbon rails make packing your gear in much easier and the included High Torque motor lets you get incredible vertical shots.
Make sure to add Rhino Focus to your bundle to keyframe your focus for even more dynamic time-lapses.
Features
- Ultra light carbon fiber rails are easy to pack
- High Torque motor for vertical slider shots
- Carry your gear completely set-up in the soft shell case
- In the box
Includes
- Rhino Slider Carbon 42”
- Rhino Arc II
- Rhino Motor - High Torque
- Slider Carrying Case 42”
Rhino Ultimate Slider Bundle
$ 3,650.00
Rhino Ultimate Slider Bundle
Rhino SKU: SKU250 | Helix SKU: RHSKU250
Overview
The Ultimate Slider Bundle equips you with a complete 4-axis slider setup that can capture anything from a dynamic interview with a 15lb cinema camera to a vertical day to night time-lapse with a mirrorless setup.
Our goal with this bundle was to put everything you’d ever need for a slider setup in a hard shell case that you can travel with and keep your gear organized for whatever shoot comes your way.
Features
- Complete 4-axis Rhino System
- Ships in an airline ready hardshell case to keep your gear safe and organized
- Comes with interchangeable rails to transform your slider based on the shoot
- Includes both motors to let you go fast or vertical
In the box
- Rhino Slider Pro 42”
- Rhino Arc II
- Rhino Focus
- Rhino Motor - High Torque
- Rhino Motor - High Speed
- Carbon 24” Rails
- Slider Hard Shell Case
Rhino Ultimate Slider Bundle with Soft Case
$ 3,550.00
Rhino Ultimate Slider Bundle with Soft Case
Rhino SKU: SKU255 | Helix SKU: RHSKU255
Overview
The Ultimate Slider Bundle equips you with a complete 4-axis slider setup that can capture anything from a dynamic interview with a 15lb cinema camera to a vertical day to night time-lapse with a mirrorless setup.
Includes
Rhino Slider Pro 42”
Rhino Arc II
Rhino Focus
Rhino Motor - High Torque
Rhino Motor - High Speed
Carbon 24” Rails
Slider Soft Shell Case
International charger
Mounting tool and bottle opener
Right Angle Baby Plate
$ 24.95
This wall plate contains a 5/8" baby stud bent at a 90 degree angle, with eight mounting holes for screws or nails.
Rogue 3-in-1 Flash Grid with 3 Gel Starter Set
$ 39.95 - Vendido
Rogue 3-in-1 Flash Grid with 3 Gel Starter Set
Rogue SKU: ROGUEGRID2 | Helix SKU: EXROGUEGRID2
Overview
The Rogue 3-in-1 Flash Grid uses 2 interchangeable and stackable honeycomb grid inserts to create a 45º, 25º, or a tight 16º grid spot for dramatic lighting effects.
The Rogue Flash Grid includes the new attachment strap and a starter set of 3 colorful effects gels (Dark Salmon, Steel Green and Oklahoma Yellow).
Honeycomb grids produce a spot of light with gradual fall-off. They can be used as main lights, as hair lights in portraiture, or for background and accent lights to create mood and drama.
The 3-in-1 Rogue Flash Grid is designed to fit most standard sized flash models from Canon, Nikon, Sony, Nissin, Phottix, ProMaster and Yongnuo.
New Rogue Grid Attachment Design: The Rogue Grid uses an improved belt and buckle design to provide a faster and more secure attachment to your flash. The integrated attachment strap is adjustable to fit all popular brands of accessory flashes with a circumference measuring from 8" to 9 3/4".
Features:
- Produces 16, 25 and 45 degree grid spots
- Attaches quickly & securely
- Fits all popular brands of accessory flashes
- Size: 3.6" x 1.2" (92mm x 30mm)
- Weight: 3.9 oz (110g)
Contents:
Grid Bezel
25˚ Honeycomb Grid insert
45˚ Honeycomb Grid insert
Grid Snoot (with integrated attachment strap)
3-Gel Starter Set (Dark Salmon, Oklahoma Yellow, Steel Green)
Soft Fabric Carry Pouch
Rogue Diffusion Panel - Small
$ 19.95
Rogue Diffusion Panel - Small
Rogue SKU: ROGUEDFPSM | Helix SKU: EXROGUEDFPSM
Overview
The Small Diffusion Panel converts the FlashBender Small Reflector (sold separately) into a lightweight, low profile soft box for use with on-camera accessory flash.
The Small Diffusion Panel attaches quickly to the FlashBender Small Reflector using hook-and-loop sewn along the edges of each panel.
Attaching the Small Diffusion Panel to the FlashBender 2 Small Reflector will reduce your exposure by approximately 1 f/stop compared to the FlashBender 2 Small Reflector without the Diffusion Panel.
Features:
- Attaches Quickly to FlashBender SMALL Reflector (sold separately)
- Transforms FlashBender SMALL Reflector into a soft box
- Packs Flat / Great for Travel
- Size: 9" x 4.5" (229mm x 114mm)
- Weight: 1.5 oz (45g)
Contents:
1x Diffusion Panel SMALL
Samigon Bamboo Print Tongs
$ 4.95 - Vendido
Made of the finest quality bamboo. Tongs are 9" long and have non-slip, non-scratch rubber tips to hold photo paper.
Sekonic L-308X-U Flashmate Light Meter
$ 229.00
Sekonic L-308X-U Flashmate Light Meter
Sekonic SKU: 401-305 | Helix SKU: SE401305
Overview
- Incident Metering for Ambient & Flash
- 40° Reflected Light Metering
- Photo, Cine, and HD Cine Metering Modes
- Customizable LCD with Auto Backlight
- Range: 0 to 19.9 EV at ISO 100
- Flash Range: f/1.0 to f/90.9 at ISO 100
- Exposure Time: 1/8000 to 60 Sec
- Repeat Accuracy: ±0.1 EV or Less
- PC Sync Terminal & Cordless Flash Option
- Runs on One AA Battery
Exceptionally portable and versatile in its design, the L-308X-U Flashmate Light Meter from Sekonic is a versatile meter that blends both photo and video-oriented functions into a single unit. Equipped with a sliding lumisphere, the L-308X is capable of measuring incident or reflected light via a lens with a 40° reception angle. It offers a wide metering range from 0 to 19.9 EV at ISO 100, working with exposure times as low as 1/8000 all the way up to 60 seconds; it also has an equally broad flash range from f/1.0 to f/90.9 at ISO 100.
The L-308X offers three specialized metering modes: a Photo mode for still shooting with aperture and shutter priority, a Cine mode for selecting frame rates between 8-128 fps with one-tenth of a stop accuracy, and an HD Cine mode for those shooting video with DSLR or mirrorless cameras. All these settings can be easily viewed on the backlit LCD display, which can be customized to your liking and automatically lights up when working at 5 EV or darker. Other features include a PC sync terminal and a cordless flash measuring option. The L-308X-U weighs approximately 3.5 oz and runs on a single AA battery.
What's in the Box
SensorScope Cleaning System - Digital SLR Sensor Cleaning Kit
$ 94.95
What you can't see can affect your pictures. Countless types of contaminants will turn up in the camera chamber and on the sensor. Dry loose particles may statically adhere, while wet particles can chemically bond to the sensor. Contaminants come from changing lenses, dusty/humid environments, and even from inside the camera chamber itself. SensorScope enables you to check your sensor to see if it needs cleaning-there's nothing safer than not cleaning your sensor. The SensorScope looks like a camera lens; however, it allows you to look back into your camera to inspect your sensor. The SensorScope is easily portable and provides a 5x magnification lens and 4 ultra bright LED lights, which are focused to completely illuminate the field of inspection. Although specifically designed for Canon and Nikon DSLRs, the SensorScope may be used on any manufacturer's DSLR. 1 SensorScope (2 CR2025 Batteries included). 1 SensorVac (4 AA Batteries included) 24 SensorSafe Wands; 12 Small, 6 Medium, 6 Large 1 SensorSolution (.5 oz. bottle) 1 Carrying Case
Sigma 1.4 X Teleconverter TC-1401 (only for SGV Lenses) (Canon)
$ 349.00 - Vendido
Sigma 1.4 X Teleconverter TC-1401 (only for SGV Lenses) (Canon) - SM879101
Product Overview
Equipped with 1 SLD (Special Low Dispersion) glass element for maximum image quality, the new Sigma Global Vision teleconverters utilize a splash and dust proof construction for long lasting durability. Created exclusively for the Global Vision lenses, these teleconverters ensure the utmost in compatibility, even for large diameter lenses. With effective AF at F8 and 1.4x the reach, get the most out of your Sigma lens.
| SIGMA TELECONVERTER TC-1401 | |||
| SIGMA | NIKON | CANON | |
| 120-300mm F2.8 DG OS HSM | Sports | AF*1 | AF*2 | AF*3 |
| 150-600mm F5-6.3 DG OS HSM | Sports | AF*4 | AF*4 | AF*4 |
| 150-600mm F5-6.3 DG OS HSM | Contemporary | AF*4 | AF*4 | AF*4 |
Teleconverter TC-1401 is only compatible with the Global Vision lenses listed above.
*1 It becomes compatible with the new tele converters once the lens firmware is updated to Ver. 1.01 or later.
*2 It becomes compatible with the new tele converters once the lens firmware is updated to Ver. 1.02 or later.
*3 It becomes compatible with the new tele converters once the lens firmware is updated to Ver. 1.03 or later.
*4 When SIGMA TELE CONVERTER TC-1401 is attached to cameras that are compatible with AF at F8, it is possible to shoot with AF. In cases where contrast or brightness level of the shooting object is low, it may not focus properly.
Please be advised that the updated version of lens firmware will make it compatible with the new tele converters, however it will also make it incompatible with conventional APO TELE CONVERTER 1.4x EX DG and APO TELE CONVERTER 2x EX DG.
SPECIFICATIONS
Sigma 1.4 X Teleconverter TC-1401 (only for SGV Lenses) (Nikon)
$ 349.00
Sigma 1.4 X Teleconverter TC-1401 (only for SGV Lenses) (Nikon) - SM879306
Product Overview
Equipped with 1 SLD (Special Low Dispersion) glass element for maximum image quality, the new Sigma Global Vision teleconverters utilize a splash and dust proof construction for long lasting durability. Created exclusively for the Global Vision lenses, these teleconverters ensure the utmost in compatibility, even for large diameter lenses. With effective AF at F8 and 1.4x the reach, get the most out of your Sigma lens.
| SIGMA TELECONVERTER TC-1401 | |||
| SIGMA | NIKON | CANON | |
| 120-300mm F2.8 DG OS HSM | Sports | AF*1 | AF*2 | AF*3 |
| 150-600mm F5-6.3 DG OS HSM | Sports | AF*4 | AF*4 | AF*4 |
| 150-600mm F5-6.3 DG OS HSM | Contemporary | AF*4 | AF*4 | AF*4 |
Teleconverter TC-1401 is only compatible with the Global Vision lenses listed above.
*1 It becomes compatible with the new tele converters once the lens firmware is updated to Ver. 1.01 or later.
*2 It becomes compatible with the new tele converters once the lens firmware is updated to Ver. 1.02 or later.
*3 It becomes compatible with the new tele converters once the lens firmware is updated to Ver. 1.03 or later.
*4 When SIGMA TELE CONVERTER TC-1401 is attached to cameras that are compatible with AF at F8, it is possible to shoot with AF. In cases where contrast or brightness level of the shooting object is low, it may not focus properly.
Please be advised that the updated version of lens firmware will make it compatible with the new tele converters, however it will also make it incompatible with conventional APO TELE CONVERTER 1.4x EX DG and APO TELE CONVERTER 2x EX DG.
SPECIFICATIONS
| Lens Construction | 7 Elements in 5 Groups | ||||||||
| Shooting RAnge and Shooting Ratio | 1.4 times the magnification of the original lens | ||||||||
| Dimensions (Diameter x Length) |
69.8x25.0mm/ 2.7x1.0in | ||||||||
| Weight | 190g/ 6.7oz | ||||||||
| Corresponding Mounts |
|
||||||||
|
* The appearance, specifications, and the like of the product are subject to change for improvement without notice. |
|||||||||
Sigma 1.4 X Teleconverter TC-1401 (only for SGV Lenses) (Sigma)
$ 349.00
Sigma 1.4 X Teleconverter TC-1401 (only for SGV Lenses) (Sigma) - SM879110
Product Overview
Equipped with 1 SLD (Special Low Dispersion) glass element for maximum image quality, the new Sigma Global Vision teleconverters utilize a splash and dust proof construction for long lasting durability. Created exclusively for the Global Vision lenses, these teleconverters ensure the utmost in compatibility, even for large diameter lenses. With effective AF at F8 and 1.4x the reach, get the most out of your Sigma lens.
| SIGMA TELECONVERTER TC-1401 | |||
| SIGMA | NIKON | CANON | |
| 120-300mm F2.8 DG OS HSM | Sports | AF*1 | AF*2 | AF*3 |
| 150-600mm F5-6.3 DG OS HSM | Sports | AF*4 | AF*4 | AF*4 |
| 150-600mm F5-6.3 DG OS HSM | Contemporary | AF*4 | AF*4 | AF*4 |
Teleconverter TC-1401 is only compatible with the Global Vision lenses listed above.
*1 It becomes compatible with the new tele converters once the lens firmware is updated to Ver. 1.01 or later.
*2 It becomes compatible with the new tele converters once the lens firmware is updated to Ver. 1.02 or later.
*3 It becomes compatible with the new tele converters once the lens firmware is updated to Ver. 1.03 or later.
*4 When SIGMA TELE CONVERTER TC-1401 is attached to cameras that are compatible with AF at F8, it is possible to shoot with AF. In cases where contrast or brightness level of the shooting object is low, it may not focus properly.
Please be advised that the updated version of lens firmware will make it compatible with the new tele converters, however it will also make it incompatible with conventional APO TELE CONVERTER 1.4x EX DG and APO TELE CONVERTER 2x EX DG.
SPECIFICATIONS
| Lens Construction | 7 Elements in 5 Groups | ||||||||
| Shooting RAnge and Shooting Ratio | 1.4 times the magnification of the original lens | ||||||||
| Dimensions (Diameter x Length) |
69.8x25.0mm/ 2.7x1.0in | ||||||||
| Weight | 190g/ 6.7oz | ||||||||
| Corresponding Mounts |
|
||||||||
|
* The appearance, specifications, and the like of the product are subject to change for improvement without notice. |
|||||||||
