Ikelite Vinyl Port Cover - 2.2 inch
$ 5.00
Ikelite Vinyl Port Cover - 2.2 inch
Ikelite SKU: 0200.02 | Helix SKU: 020002
Overview
Vinyl covers in a variety of diameters to protect lens ports.
1.75-inch fits the EV Manual Controller.
2-inch fits 46mm threaded lens ports.
3-inch fits most 67mm threaded lens ports found on compact digital and video housings, as well as the Mirrorless Flat Macro Port Standard.
3.9-inch fits compact digital ports which accept the WD-4 Dome, as well as the Modular Flat Front for DSLR housings.
Ikelite Vinyl Port Cover - 3 inch
$ 5.00
Ikelite Vinyl Port Cover - 3 inch
Ikelite SKU: 0200 | Helix SKU: 0200
Overview
Vinyl covers in a variety of diameters to protect lens ports.
1.75-inch fits the EV Manual Controller.
2-inch fits 46mm threaded lens ports.
3-inch fits most 67mm threaded lens ports found on compact digital and video housings, as well as the Mirrorless Flat Macro Port Standard.
3.9-inch fits compact digital ports which accept the WD-4 Dome, as well as the Modular Flat Front for DSLR housings.
Ikelite O-Ring for PC-Series Flashlight - PC / PCa (4 C cell / 6 AA cell)
$ 9.95
Ikelite O-Ring for PC-Series Flashlight - PC / PCa (4 C cell / 6 AA cell)
Ikelite SKU: 0134.28 | Helix SKU: 013428
Overview
Replacement seal for PC-series Halogen or LED light front. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring for PC-Series Flashlight - PCm (4 AA cell)
$ 9.95
Ikelite O-Ring for PC-Series Flashlight - PCm (4 AA cell)
Ikelite SKU: 0134.23 | Helix SKU: 013423
Overview
Replacement seal for PC-series Halogen or LED light front. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring 0132.41 for FL Modular Port Extension
$ 14.95
Ikelite O-Ring 0132.41 for FL Modular Port Extension
Ikelite SKU: 0132.41 | Helix SKU: 013241
Overview
Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring 0126 for Mini-C Light
$ 9.95
Ikelite O-Ring 0126 for Mini-C Light
Ikelite SKU: 0126 | Helix SKU: 0126
Overview
Ikelite O-Ring 0126 for Mini-C Light
Ikelite O-Ring 0124 for C-Light 8
$ 9.95
Ikelite O-Ring 0124 for C-Light 8
Ikelite SKU: 0124 | Helix SKU: 0124
Overview
Replacement seal for C-Light 8 Halogen or LED flashlights.
Ikelite O-Ring 0123 for RCD, Super-8 Lights
$ 9.95
Ikelite O-Ring 0123 for RCD, Super-8 Lights
Ikelite SKU: 0123 | Helix SKU: 0123
Overview
Replacement seal for RCD and Super-8 flashlights.
Ikelite O-Ring for Sync Cord Plug - Ikelite ICS-5 Plug
$ 9.95
Ikelite O-Ring for Sync Cord Plug - Ikelite ICS-5 Plug
Ikelite SKU: 0136.13 | Helix SKU: 013613
Overview
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring for Sync Cord Plug - Nikonos V / N5 Plug
$ 9.95
Ikelite O-Ring for Sync Cord Plug - Nikonos V / N5 Plug
Ikelite SKU: 0118 | Helix SKU: 0118
Overview
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring for Sync Cord Plug - Nikonos SB Strobe
$ 9.95
Ikelite O-Ring for Sync Cord Plug - Nikonos SB Strobe
Ikelite SKU: 0117 | Helix SKU: 0117
Overview
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring for Sync Cord Plug - SEA&SEA / INON Strobe
$ 9.95
Ikelite O-Ring for Sync Cord Plug - SEA&SEA / INON Strobe
Ikelite SKU: 0134.12 | Helix SKU: 013412
Overview
Replacement seal for electrical sync cord ends. Requires light lubrication with Ikelite silicone lubricant, sold separately.
Ikelite O-Ring 0132.61 for DSLR & Mirrorless Housings (Type 2)
$ 17.95
Ikelite O-Ring 0132.61 for DSLR & Mirrorless Housings (Type 2)
Ikelite SKU: 0132.61 | Helix SKU: 013261
Overview
For select DSLR & Mirrorless housing models. Refer to your housing documentation for compatibility. Lubrication is not required but Ikelite silicone lubricant may be used if needed to clean the o-ring.
Ikelite O-Ring 0110 for Digital Housings
$ 19.95
Ikelite O-Ring 0110 for Digital Housings
Ikelite SKU: 0110 | Helix SKU: 0110
Overview
Replacement seal for certain Ikelite housings for compact digital and mirrorless cameras. Refer to your housing's instruction manual for compatibility.
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - AU
$ 29.95
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - AU
Ikelite SKU: 0083.95 | Helix SKU: 008395
Overview
Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range. Available with USA, European, UK, or Australian non-interchangeable AC plug. Can be used with a quality travel adapter (not included). This charger is perfect for travel at less than half the size of our previous model smart charger.
For use only with NiMH battery packs for DS161, DS161, and DS125 strobes. Not suitable for use with lithium ion (li-ion) battery packs.
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - UK
$ 45.00
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - UK
Ikelite SKU: 0083.94 | Helix SKU: 008394
Overview
Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range. Available with USA, European, UK, or Australian non-interchangeable AC plug. Can be used with a quality travel adapter (not included). This charger is perfect for travel at less than half the size of our previous model smart charger.
For use only with NiMH battery packs for DS161, DS161, and DS125 strobes. Not suitable for use with lithium ion (li-ion) battery packs.
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - EU
$ 45.00
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - EU
Ikelite SKU: 0083.93 | Helix SKU: 008393
Overview
Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range. Available with USA, European, UK, or Australian non-interchangeable AC plug. Can be used with a quality travel adapter (not included). This charger is perfect for travel at less than half the size of our previous model smart charger.
For use only with NiMH battery packs for DS161, DS161, and DS125 strobes. Not suitable for use with lithium ion (li-ion) battery packs.
Ikelite O-Ring 0109 for Digital Housings
$ 8.95
Ikelite O-Ring 0109 for Digital Housings
Ikelite SKU: 0109 | Helix SKU: 0109
Overview
Replacement seal for certain Ikelite housings for compact digital cameras. Refer to your housing's instruction manual for compatibility.
Newer o-rings are red-orange in color. They can be used interchangeably with the black o-rings as long as you select the correct size for your housing.
Ikelite O-Ring 0132.59 for DSLR & Mirrorless Housings (Type 1)
$ 17.95
Ikelite O-Ring 0132.59 for DSLR & Mirrorless Housings (Type 1)
Ikelite SKU: 0132.59 | Helix SKU: 013259
Overview
For select DSLR & Mirrorless housing models. Refer to your housing documentation for compatibility. Lubrication is not required but Ikelite silicone lubricant may be used if needed to clean the o-ring.
Ikelite Locking Stainless Steel Lid Snap
$ 19.95
Ikelite Locking Stainless Steel Lid Snap
Ikelite SKU: 0182 | Helix SKU: 0182
Overview
Replacement stainless steel lid snap with lock as used on Ikelite DSLR, compact digital, and video camcorder housings. Lid hook and mounting hardware not included.
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - USA
$ 45.00
Ikelite Smart Charger for DS161, DS160, DS125 NiMH Battery Packs - USA
Ikelite SKU: 0083.92 | Helix SKU: 008392
Overview
Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range. Available with USA, European, UK, or Australian non-interchangeable AC plug. Can be used with a quality travel adapter (not included). This charger is perfect for travel at less than half the size of our previous model smart charger.
For use only with NiMH battery packs for DS161, DS161, and DS125 strobes. Not suitable for use with lithium ion (li-ion) battery packs.
Ikelite Halogen Bulb for C-Lite 8, Super-8 Lights
$ 17.95
Ikelite Halogen Bulb for C-Lite 8, Super-8 Lights
Ikelite SKU: 0042.58 | Helix SKU: 004258
Overview
High-intensity halogen bulb with standard PR-style base. Compatible with Ikelite 8 cell lights including the C-Lite 8 Halogen and Super-8 Halogen.
Ikelite UR/Pro Blue Water External Color Filter for WP80
$ 99.95
Ikelite UR/Pro Blue Water External Color Filter for WP80
Ikelite SKU: 644145 | Helix SKU: 644145
Overview
Enhances warm reds and oranges with available sunlight up to 80' (24m). Secures to the outside of the Ikelite lens port offering easy installation and removal.
Ikelite Sync Cord Two Ikelite Strobes to Ikelite Bulkhead (Updated)
$ 160.00
Ikelite Sync Cord Two Ikelite Strobes to Ikelite Bulkhead (Updated)
Overview
Y-shaped sync cord with Ikelite-style plugs on all ends. Supports TTL operation with any compatible system featuring an Ikelite-style electrical bulkhead and two DS strobes. The Ikelite-style plug is widely recognized as the most reliable waterproof strobe sync connection available. Built-in strain reliefs reduce stress on cord ends.
This cord is a direct replacement for the prior version # 4103.52. The Ikelite plugs now feature hard anodized aluminum fittings. Overall the cord is significantly lighter while maintaining the same durability as the original nickel plated brass product.
Compatible with all Ikelite housings featuring an electrical bulkhead, Ikelite TTL Converters, and select housings from other manufacturers that have been upgraded with an Ikelite electrical bulkhead.
To connect two strobes to a single housing bulkhead, use a single sync cord # 45151 instead.
In the Box
Sync Cord
(3) Connector Protector Ikelite end # 0301.12
Silicone Lubricant 1cc 1cc tube
Ikelite 200DL Underwater Housing for Canon EOS 6D DSLR Cameras
$ 1,695.00
Ikelite 200DL Underwater Housing for Canon EOS 6D DSLR Cameras
Ikelite SKU: 71706 | Helix SKU: 71706
Overview
A full featured and durable waterproof housing for Canon EOS 6D DSLR cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
This housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.
Lens Ports
This housing features our robust new Dry Lock (DL) port system. "Dry Lock" refers to the placement of the o-ring on the outside of the port mount. This improves visibility and reduces the chances of water dropping onto your precious camera sensor. DL ports are the lightest on the market, yet robust and capable of standing up to rough surf. Attachment is quick and secure. A system of extensions can accommodate a huge variety of lenses with ease.
Most popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Refer to the DL System Port Chart to choose the correct gear. Zoom gears sold separately.
Legacy Four Lock Port Compatibility
Due to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed using a T15 Torx bit and replaced with old style Port Locks for FL Port System (Set of 4) # 5509.04 for legacy users with standard or modular ports from our Four Lock system. This modification will prevent the use of newer DL ports. Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and may incur additional service charges. The housing cannot be converted back and forth repeatedly. There are significant advantages to upgrading your lens ports which you can read about here. If you're shooting an 8" diameter dome, you'll also save almost 2 pounds by switching to the DL version.
Vacuum System
The included vacuum valve allows you to pressurize the housing to check for leaks prior to putting your expensive equipment in the water. Use of the vacuum valve requires a compatible Vacuum Pump with Gauge # 47011, sold separately.
There is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.
TTL Exposure
This housings supports your choice of shooting manual strobes or adding TTL electronics depending on your application. Our new modular electronics system allows the housing to be updated with future strobe communications products as they become available. The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations.
You can enjoy the fastest and most accurate TTL exposure on the market by adding the CT1K Canon TTL Kit # 46070 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.
Controls and Set-Up
Shutter and AF-ON levers stand out with super sensitive and natural feeling curved levers. Both controls can be extended using the optional Shutter Trigger Extension # 4077.93 for more comfortable use when using a right-hand quick release handle.
All push button controls are machined and hard anodized aluminum to reduce weight and resist salt build-up. The back of the housing is laser engraved with control symbols which will never fade or fall off.
The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.
Viewfinders
The included Super-Eye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Magnified Viewfinder # 6890 or 45° Magnified Viewfinder (Type 2) # 6891.2. The angle of a 45º viewfinder is more ergonomic when shooting underwater plus it provides a larger and brighter view than the standard Super-Eye.
Handling & Travel
The housing, tray, and handles have been optimized to reduce weight while maintaining strength and durability. The Right-Hand Quick Release Handle # 4077.02 (sold separately) can be added or removed depending on your needs. The precision machined aluminum base features 1/4-20 tripod mounting sockets and additional mounting locations for future accessories. The base and handle can be quickly removed when breaking down your system for travel.
A 1/4-20 threaded mounting point is located front and center on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or GoPro camera.
If you're shooting with two strobe or lighting arms, then a top handle can be added to carry to and from the dive site. Top handles are available in a Cable Grip # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories.
Construction
Our new ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun.
Every housing is made in the USA, individually inspected for fit, and water pressure tested to 200 feet (60m).
Non-Ikelite Strobes
SEA&SEA, INON, and Retra strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.
Ikelite Non-Digital Strobes
Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.
Fiber Optic
Fiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.
Remote Triggering
Strobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter # 4403 or the Water Wizard system (manufactured and sold by Aquatica).
Compatibility
This housing is only compatible with Canon EOS 6D camera as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other DSLR models, including the newer EOS 6D Mark II, from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.
Specifications
200' (60m) depth rating
Compatible with DL system lens ports
Controls are provided for all important camera controls; Controls are not provided for LCD panel illumination button, Depth-of-field preview button, Dioptric adjustment knob, Multi function lock switch
1/4-20 thread base mounts with 3.5" spacing
Near neutral buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
4.8 lb (2.2 kg)
9.2 x 7.1 x 6.6" (234 x 180 x 168 mm)
Vacuum valve included (pump sold separately)
Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes
ABS-PC construction is fundamentally corrosion-resistant
Made in the USA; Individually inspected for fit and water pressure tested to depth
1 year limited warranty
What's in the Box
Housing
Rear O-ring # 0132.59 (installed)
Front O-ring # 0132.45 (installed)
Base with Left-Hand Quick Release Handle # 4077.67
Port Hole Cover # 0200.92 (installed)
Waterproof Bulkhead Cap # 9104.5 (installed)
Zoom Gear Retainer # 75900 (installed)
Tool for Zoom Gear Retainer # 0945.06
4-40 Hex Key # 0945.11
1/16" Hex Key # 0945.16
1/8" Hex Key # 0945.18
Control + Push Button Tip Assortment # 9249
Silicone Lubricant 2cc Tube # 0184.2
Ikelite Panasonic GH5 GH5s Housing 200DL
$ 1,695.00
Ikelite Panasonic GH5 GH5s Housing 200DL 71305 - IK71305
A full featured and durable waterproof housing for Panasonic Lumix GH5 and GH5S Mirrorless Micro Four-Thirds cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
-
Key Features
200' (60m) depth rating
Perfect for any wet environment including surf, dive, and pool use
Supremely functional for maximum creative control—access is provided for all important camera functions
The new Dry Lock (DL) Port System gives added security at the surface of the water and accommodates large diameter lenses
Extra-large, soft touch zoom knob; Zoom is accessible for many lenses using our unique universal zoom gear system
Vacuum valve included; Test your system after assembly prior to entering the water; Pump sold separately
Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL circuitry provides automatic exposure with compatible Ikelite DS strobes
Control symbols are laser etched into the back and will never fade or rub off
Quick install camera mount plate does not need to be removed for battery or memory card access
One spare 1/2-20 threaded accessory port locations on the front of the housing for the addition of optional accessories
Includes a balanced aluminum base with left-hand quick release handle; Right-hand handle sold separately
Signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel
ABS-PC construction is fundamentally corrosion-resistant
Made in the USA; Individually inspected for fit and water pressure tested to depth
1 year limited warranty
TTL Exposure
Install optional Panasonic TTL Kit # 46031 for automatic TTL exposure with compatible Ikelite DS-model Strobes. Ikelite DS-model strobes may be used with this system without the Panasonic TTL Kit installed, but will not provide TTL exposure.
Non-Ikelite Strobes
SEA&SEA, INON, and Nikonos strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.
Ikelite Non-Digital Strobes
Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.
Fiber Optic
Fiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.
Remote Triggering
Strobes with remote slave capabilities may be triggered off of a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter Product number 4403 or the Water Wizard system (manufactured and sold by Aquatica).
Compatibility
This housing is only compatible with the Panasonic Lumix GH5 and GH5S Mirrorless Cameras as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other DSLR models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.
The GH5 camera body is not compatible in older housings for Panasonic Lumix GH3/GH4 cameras.
FL Port Conversion
This housing comes standard with the new Dry Lock (DL) port mount. Ports designed for our Four Lock (FL) or Two Lock DSLR housings are not compatible with this system. This housing can be converted by the user to the FL system by removing the DL mount and adding four # 9072.24 port locks.
The DL mount is not designed to be removed and replaced repeatedly. Conversion back to the DL system at a later time requires return of the housing to Ikelite for re-installation and water pressure testing.
DL ports are considerably lighter weight than the comparable FL versions and support a more robust mount. The DL system is recommended for surf photography.
Specifications
200' (60m) depth rating
Compatible with DL system lens ports
Controls are provided for all important camera functions; Controls are not provided for Diopter Adjustment Control, Rear Control Dial, or Mode Dial Lock. Mode Dial must be un-locked prior to installation for use underwater
1/4-20 thread base mounts with 3.5" spacing
Near neutral buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
5.1 lb (2.3 kg)
9.2 x 7.1 x 6.5" (234 x 180 x 165 mm)
-
In the Box
Housing
Rear O-ring # 0132.61
Front O-ring # 0132.45
Base with Left-Hand Quick Release Handle # 4077.67
Port Hole Cover # 0200.92
Zoom Gear Retainer # 75900
Waterproof Bulkhead Cap # 9104.5
Silicone Lubricant # 0184.2
Control + Pushbutton Tip Assortment # 9249
1/16" Hex Key # 0945.16
1/8" Hex Key # 0945.18
1 year limited warranty
ikelite 200DL Underwater Housing for Sony Alpha A9 Mirrorless Cameras
$ 1,695.00
ikelite 200DL Underwater Housing for Sony Alpha A9 Mirrorless Cameras
ikelite SKU: 71473 | Helix SKU: 71473
Overview
A full featured and durable waterproof housing for Sony Alpha A9 Mirrorless cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
- Depth Rating: 200'
- Ikelite 5-Pin Bulkhead Strobe Connector
- Manual Flash Exposure, TTL Optional
- Mechanical Controls
- Access to All Essential Camera Functions
- White ABS/Polycarbonate Body, Clear Back
- Interchangeable DL Lens Port System
- Ships without Required Lens Port
- Vacuum Valve Included
- Made in the USA
Compatibility
This housing is only compatible with the Sony Alpha A9 camera as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other camera models from being used in this housing. We are not aware of any other models which may be used in or adapted to this particular housing.
Specifications
200' (60m) depth ratingCompatible with DL system lens ports
Controls are provided for all important camera controls; Controls are not provided for the Diopter adjustment dial, Multi-selector, Media slot cover switch, Focus mode dial; Focus mode dial lock release button
1/4-20 thread base mounts with 3.5" spacing
Near neutral buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
5.0 lb (2.3 kg)
9 x 7.2 x 6.5" (229 x 183 x 168 mm)
Vacuum valve included (pump sold separately)
Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes
ABS-PC and Lexan construction is fundamentally corrosion-resistant
Made in the USA; Individually inspected for fit and water pressure tested to depth
1 year limited warranty
What's In the Box
HousingRear o-ring # 0132.59
Front o-ring # 0132.45
Base with Left-Hand Quick Release Handle # 4077.67
Port Hole Cover # 0200.92
Zoom Gear Retainer # 75900
Tool for Zoom Gear Retainer # 0945.06
Waterproof Bulkhead Cap # 9104.5
4-40 Hex Key # 0945.11
1/16" Hex Key # 0945.16
1/8" Hex Key # 0945.18
Control + Push Button Tip Assortment # 9249
Silicone Lubricant 1cc Tube # 0184.2
SeaLife 52mm Adapter for mounting lens to any SeaLife DC-series housings
$ 39.00 - Vendido
SeaLife 52mm Adapter for mounting lens to any SeaLife DC-series housings
SeaLife SKU: SL977 | Helix SKU: SL977
Overview
SeaLife 52mm Adapter for mounting lens to any SeaLife DC-series housings
SeaLife DC-Series Super Macro Lens
$ 129.00 - Vendido
SeaLife DC-Series Super Macro Lens
SeaLife SKU: SL976 | Helix SKU: SL976
Overview
Capture sharp macro images with SeaLife DC-Series cameras
The Super Macro Lens captures stunning macro images from 1.5” to 4” (4cm to 10cm). The lens features a 2-element optical grade lens with anti-reflective coating and durable anodized aluminum construction with rubber press-on lens mount. This 52 mm lens also attaches to any underwater housing with 52mm mounting threads.
Includes 52mm adapter (SL977), safety lanyard and protective pouch.
Capture sharp details of tiny sea creatures at close-up range from 1.5” to 4” (4cm to 10cm)
+10 diopter, 2-element optical grade lens with broadband anti-reflective coating
Includes SL977 52mm Adapter for mounting lens to any SeaLife DC-series housings
52mm lens also attaches to any underwater housing with 52mm mounting threads
Quick and easy push-on attachment on land or underwater
Works with SeaLife DC2000 and, DC1400 and all previous DC-series cameras
Waterproof to 200ft/60m
Durable anodized aluminum construction
Includes 52mm adapter (SL977), safety lanyard and protective pouch.
Specifications
SeaLife Dc-Series Super Macro Lens Specifications
| Optical construction | 2-element optical grade lens with broadband anti-reflective coating on internal surfaces. |
| Focus ranges |
DC2000: 1.5" to 4" (4cm tp 10cm) on land or underwater |
| Attachment method |
52mm for attaching lens to any UW housing with 52mm mounting threads OR |
| Lens weight (lens only) | 52.5g (on land); 28.3g (in freshwater); 29g (in saltwater) |
| Lens dimensions | 2.3"(58mm) diameter x 0.45"(11.5mm) width |
| 52mm adapter weight | 19.5g (on land); 11g (in freshwater); 11g (in saltwater) |
| 52mm adapter dimensions | 2.3"(58mm) diameter x 0.45"(11.5mm) width |
| Packaging dimension | 215mm height x 98mm width x 26mm length |
| Packaging weight | TBD |
| Buoyancy | Negative |
| Warranty | 1 year limited warranty |
| Depth | Individually depth tested to 200’ (60 m) |
|
|
SeaLife DC2000 camera: Focus setting should be set to AF
SeaLife DC1400 cameras: TBD
SeaLife O Ring for DC2000 Housing
$ 14.00 - Vendido
SeaLife O Ring for DC2000 Housing
SeaLife SKU: SL7417 | Helix SKU: SL7417
Overview
SeaLife O Ring for DC2000 Housing
SeaLife Adapter for GoPro® Camera
$ 9.00 - Vendido
SeaLife Adapter for GoPro® Camera
SeaLife SKU: SL9817 | Helix SKU: SL9817
Overview
Easily mount a GoPro® camera to your underwater lighting
The GoPro® adapter adds a standard 1/4-20 tripod mount to your GoPro camera, allow for quick and easy mounting to underwater lighting and other accessories.
For even more versatility, the included 1/4-20 stud allows easy attachment to camera bases, as well as to the base of accessories like the AquaPod and Flex-Connect Handle.
Attaches using the thumb knob and bolt from your original camera mount. An acorn nut is included.
SeaLife Sea Dragon 1200 - 2500 Battery
$ 69.00 - Vendido
SeaLife Sea Dragon 1200 - 2500 Battery
SeaLife SKU: SL9831 | Helix SKU: SL9831
Overview
Lithium Ion Battery for Sea Dragon Lights
Rechargeable lithium ion battery (7.4 volt, 3400 mAh, 25Wh) for Sea Dragon Fluoro-Dual Beam, 1200, 1500, 2000, 2100SF, 2300 Auto, and 2500 Photo/Video/Dive Lights. Includes protective cap.
Keep a spare battery charged so you never miss an opportunity to capture that perfect shot.
SeaLife USB Charger for DC2000 Battery
$ 29.95 - Vendido
SeaLife USB Charger for DC2000 Battery
SeaLife SKU: SL7405 | Helix SKU: SL7405
Overview
SeaLife DC2000 Spare Battery
$ 29.00 - Vendido
SeaLife DC2000 Spare Battery
Sealife SKU: SL7404 | Helix SKU: SL7404
Overview
Spare battery for SeaLife DC2000 Digital Underwater Camera
- Fits SeaLife DC2000 Camera
- 3.7V 1130mAh 4.2Wh Rechargeable Lithium Ion Battery
SeaLife DC Series Lens Dock
$ 19.95 - Vendido
SeaLife DC Series Lens Dock
SeaLife SKU: SL972 | Helix SKU: SL972
Overview
Quick Access to your Wide Angle Lens
The SeaLife Lens Dock protects and stores the SeaLife Wide Angle Lens (item SL970). Lens quickly slides in and out of dock for instant access.
Quickly and easily attaches to the trays of the Digital Pro Flash or Photo/Video Light.
Note: Lens Dock will not fit the Mini Wide Angle Lens (SL974) or Fisheye Wide Angle Lens (SL975).
SeaLife Mini Series Wide Angle Lens
$ 49.00 - Vendido
SeaLife Mini Series Wide Angle Lens
SeaLife SKU: SL974 | Helix SKU: SL974
Overview
When you need to get everything in the shot
Get closer to the subject and still fit everything in the shot with the SeaLife Mini Wide Angle Lens. Compatible with the SeaLife Mini II, Reefmaster Mini, and ECOshot underwater cameras.
Specifications
0.65X conversion lens increases shooting angle by 33%
Easily presses on and off underwater
For sharp close-up shooting distance of 1ft (30cm) to infinity.
Fully-multi coated optical glass
Waterproof to 200 ft/60 m
Includes neoprene lens cover, storage pouch, safety lanyard and cleaning cloth
Super compact lens for the SeaLife Mini II (item SL330), ReefMaster Mini (item SL320, SL332) and ECOshot (item SL321) underwater cameras.
SeaLife Flex-Connect Adapter for Digital Pro Flash
$ 39.00
SeaLife Flex-Connect Adapter for Digital Pro Flash
SeaLife SKU: SL9619 | Helix SKU: SL9619
Overview
Upgrade your Digital Pro Flash
This Flex-Connect Adapter converts the popular Digital Pro Flash (Item SL961) neck to a Flex-Connect mount that can be easily mounted with just a “click” to the Flex-Connect mounting system of grips, trays, arms, and more.
The flash head easily installs to the adapter using the existing mounting bolt on the neck and included hex-wrench. The installation to the Flex-Connect adapter should take no more than 10 minutes and requires no other tools.
|
Easily Expand with Flex-Connect Accessories Quickly and easily expand your lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment. |
SeaLife Flex-Connect Handle
$ 39.00 - Vendido
SeaLife Flex-Connect Handle
SeaLife SKU: SL998 | Helix SKU: SL998
Overview
For an ergonomic, one-handed operation
Connect the powerful and compact Sea Dragon Lumen light head to the ergonomic Flex-Connect Handle for a handheld dive light.
Sea Dragon lights connect instantly to the handle with just a click, putting the power and coverage of the light in the palm of your hand.
An ergonomic grip for GoPro cameras
Connect the Flex-Connect Adapter for GoPro cameras to the Handle for ergonomic, handheld GoPro camera grip. The Handle features a standard 1/4-20 tripod mount on the bottom, and can be mounted to Flex-Connect Trays, standard tripods, and other accessories.
SeaLife Flex-Connect Adapter for GoPro® Cameras
$ 29.00
SeaLife Flex-Connect Adapter for GoPro® Cameras
SeaLife SKU: SL996 | Helix SKU: SL996
Overview
Mount your GoPro® camera to Flex-Connect accessories
Use this adapter to mount your GoPro camera to the Flex-Connect Cold Shoe Mount, Grip, Trays, or Flex Arm. Ideal for mounting a GoPro camera directly above your DC1400 or other underwater camera using the Flex-Connect Cold Shoe Mount. Includes acorn nut.
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
SeaLife 1-inch Ball Clamp
$ 39.00 - Vendido
SeaLife 1-inch Ball Clamp
SeaLife SKU: SL9907 | Helix SKU: SL9907
Overview
The Flex-Connect 1-inch Ball Clamp connects two 1-inch diameter balls together. The plates are spring-loaded for easy assembly and breakdown. Its wing-nut handle features an attractive red anodized finish.
- Fits 1-inch (25.4mm) diameter balls
- Aluminum clamp plates and wing nut handle
- Hard coat 2-color anodizing
SeaLife Ball Joint Adapter for Flex-Connect
$ 49.00 - Vendido
SeaLife Ball Joint Adapter for Flex-Connect
SeaLife SKU: SL999 | Helix SKU: SL999
Overview
The new Ball Joint Adapter for Flex-Connect connects any brand of underwater light that uses a standard 1”/25mm ball joint mounting system to Flex-Connect arms, grips, trays and cold-shoe mount. This heavy duty aluminum piece is built for maximum durability, and like all Flex-Connect accessories, it instantly connects nearly all brands of underwater lights to Flex-Connect with just a “click.”
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
SeaLife Flex-Connect Sea Dragon Ball Joint Adapter
$ 49.00
SeaLife Flex-Connect Sea Dragon Ball Joint Adapter
SeaLife SKU: SL995 | Helix SKU: SL995
Overview
Expand your underwater camera with Sea Dragon Lighting
The Flex-Connect Ball Joint Adapter connects Sea Dragon Lighting to any underwater camera using the 1”/25mm ball joint mounting system. This heavy duty aluminum piece is built for maximum durability, and like all Flex-Connect accessories, it instantly connects Sea Dragon Lighting to a set with just a “click.”
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
SeaLife Y-S Adapter
$ 29.00
SeaLife Y-S Adapter
SeaLife SKU: SL994 | Helix SKU: SL994
Overview
Connect underwater lights and flashes using a Y-S mount
The Flex-Connect Y-S Adapter easily connects any underwater light or flash using a Y-S mount to Flex-Connect grips, trays, arms, cold shoe mount, and other accessories - with no need to worry about compatibility issues. The Y-S Adapter rotates on its base left and right, and has up and down directional control by angling the light on the mount.
Easily expand with Flex-Connect accessories
Quickly and easily expand your underwater camera with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
SeaLife Cold Shoe Mount
$ 59.00 - Vendido
SeaLife Cold Shoe Mount
SeaLife SKU: SL991 | Helix SKU: SL991
Overview
An ultra compact setup
Use the Flex-Connect Cold Shoe Mount to mount a light or flash directly to the cold shoe of your underwater camera for an ultra compact lighting solution.
Combine with the Flex-Connect Adapter for GoPro Cameras to mount a GoPro directly above your underwater camera in order to simultaneously capture underwater photos and video.
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
SeaLife Flex-Connect Grip
$ 39.00
SeaLife Flex-Connect Grip
SeaLife SKU: SL9905P | Helix SKU: SL9905P
Overview
A comfortable grip for your light or camera set
The Flex-Connect Grip provides a comfortable grip and improved handling for your light, flash or underwater camera set.
The rubber-armored grip "clicks" directly into any Flex-Connect tray and accepts all Flex-Connect accessories and Sea Dragon Lights & Flash heads.
|
Expand your camera set with a "click!" Quickly and easily expand your underwater camera set with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment. Disassemble your set with just the push of a button for convenient, lightweight traveling. |
SeaLife Tray Adapter for Ikelite Housings
$ 39.00
SeaLife Tray Adapter for Ikelite Housings
SeaLife SKU: SL997 | Helix SKU: SL997
Overview
|
Connect an Ikelite housing to Flex-Connect Trays Easily connect your Ikelite camera housing to the Flex-Connect Single or Dual Tray. This anodized aluminum mounting plate attaches to Ikelite housings and also features a standard 1/4-20 tripod mount for attaching to Flex-Connect Trays. Includes two 12-24 type* stainless steel mounting bolts and a hex-wrench for quick assembly. |
SeaLife Flex-Connect Dual Tray
$ 59.00
SeaLife Flex-Connect Dual Tray
SeaLife SKU: SL9904 | Helix SKU: SL9904
Overview
Use the Dual Tray to add two lights or flashes, reducing shadowing and increasing stability
Instantly add grips, lights, flashes and Flex Arms to the Dual Tray with just a "click!" and remove them with the push of a button
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
Easily add two lights or flashes to your camera set
Use the Flex-Connect Dual Tray to mount two flashes or lights to your underwater camera for maximum brightness. Double your brightness, reduce shadowing and increase stability. Mounts all cameras with a standard 1/4-20 tripod mount.
SeaLife Flex-Connect Single Tray
$ 39.00
SeaLife Flex-Connect Single Tray
SeaLife SKU: SL9903P | Helix SKU: SL9903P
Overview
Use the Single Tray to add a light or flash to your underwater camera
Instantly add grips, lights, flashes and Flex Arms to the Single Tray with just a "click!" and remove them with the push of a button
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
Expand your underwater camera
Use the Flex-Connect Single Tray to easily expand your underwater camera with an external light or flash. Mount a light directly to the tray, or add a Flex-Connect Grip or Flex Arm for increased control and comfort. Attaches to any underwater camera with a standard 1/4-20 tripod mount. Includes mounting screw.
