F&V DMX Module : K4000/K4000S
$ 99.00 - Sold Out
F&V DMX Module : K4000/K4000S
F&V DMX Module : K4000/K4000S 10911009
$ 215.00 - Sold Out
F&V DMX Module : K4000/K4000S 10911009
User-expandable F&V Lighting DMX Module for the K4000 and K4000S Studio Panels. Similar to the SmartSync Control Circuit, users can link multiple panels together using standard CAT5 Ethernet cables. Users can also fully control their K4000 and K4000S Studio Panels from a DMX capable light board. Link Studio Panels together and keep intensity and CCT (for the K4000S) in sync. Perfect for studio applications for rigged lights needing consistent output and setting.
F&V FAF-1 Filter Adapter Frame for K4000 SE and Z400S Soft
$ 59.50 - Sold Out
F&V FAF-1 Filter Adapter Frame for K4000 SE and Z400S Soft
F&V SKU: 10315002 | Helix SKU: FV10315002
Overview
The FAF-1 is a frame that gels and filters can be mounted and then attached to either the K4000 SE or Z400S Soft light. The frame uses the new attachment system on the K4000 SE and Z400S Soft. Simply snap on the frame and it is secured to the light and cannot be removed until the buttons on each of the corners are pushed in.
The frame also is required to use the BST2-1, BSS2, and BSS6 Barn Doors (sold separately) with the lights. Each Barn Door attaches to the frame by two thumb screws.
Securely mount gels, filters, and barn doors to the K4000 SE and Z400S Soft lights.
F&V FAF-2 Filter Adapter Frame for Z800S Soft
$ 79.50
F&V FAF-2 Filter Adapter Frame for Z800S Soft
F&V SKU: 10315003 | Helix SKU: FV10315003
Overview
The FAF-2 is a frame that gels and filters can be mounted and then attached to Z800S Soft light. The frame uses the new attachment system on the Z800S Soft. Simply snap on the frame making it secured to the light and cannot be removed until the buttons on each of the corners are pushed in.
The frame is required to use the BST2-2, BSS2, and BSS6 Barn Doors (sold separately) with the lights. Each Barn Door attaches to the frame by two thumb screws.
Securely mount gels, filters, and barn doors to the Z800S Soft lights.
F&V Foam Grip with 5/8" Stud 10809002
$ 25.00 - Sold Out
F&V Foam Grip with 5/8" Stud 10809002
Machined construction with a comfortable foam grip, this F&V Lighting hand grip is perfect for a wide variety of applications. At the top most of the Hand Grip is a 5/8" stud which allows you to use it in conjunction with the popular R-300 LED Ring Light. The hand grip can also be used with a 90-degree Rod Adapter to allow compatibility with a DSLR shoulder rig. At the tip of the 5/8" stud is 1/4"-20 female thread for additional compatibility. The hand grip also has a 3/8"-16 female thread on its bottom side.
Features
- Machined Construction
- Comfortable Foam Grip
- Accessory for R-300 LED Ring Light
F&V Follow Focus Advanced 1 - Single Unit 108110500001
$ 575.00 - Sold Out
F&V Follow Focus Advanced 1 - Single Unit 108110500001
The F&V Lighting Follow Focus Advanced 1 allows you to work quickly and efficiently. With features such as a reversible gear box and a 15mm snap-on rail mount, this follow focus delivers ergonomic design for the professional. Snap-on Rail Mount: The Follow Focus Advanced 1 mounts onto standard 15mm rod systems. Its mounting system features two thumb screws: one for tightening the system to the rods and another which allows you to adjust the lateral movement of the gear box - either closer or farther away from the lens.
Reversible Gear Box: The gear box of the Follow Focus Advanced 1 features an internal worm gear that allows for precise control and no backlash. The gear box of this follow focus can be flipped to one side or the other. A thumbscrew on the bottom side of the gearbox releases the gearbox and focus knob unit from the rail mount and the gear box can be flipped to sit on the other side. This allows you to bring the drive gear either closer or farther away from the body of the camera when necessary - depending on the location of the focus ring on your lens. This comes quite handy with the use of non-standardized DSLR photography lenses. This follow focus comes with a 0.8M/40T drive gear. The drive gears are interchangeable.
Tension Dampening Focus Knob: Located on the focus knob of this system is a button that allows for the user to dampen the tension of the gear box. Hold the button and turn the focus knob right to increase tension, or hold the button and rotate left to lessen the tension. The ability to increase the tension of the gear box is immensely helpful when shooting with lenses that have a loose focus ring. The dampening system allows you to always be in control. The focus knob of this follow focus also has a dry erase focus marking disc as well as an adjustable focus tic mark. The marking disc is capable of being removed.
Features
- Aluminum Build
- Snap-on 15mm Rail Mount
- Reversible Gear Box
- Tension Dampening
- Interchangeable Drive Gear
- Removable Focus Marking Disc
- Adjustable Focus Marker
F&V Frost Diffusion Filter for R-300 Ring Light
$ 15.99
F&V Frost Diffusion Filter for R-300 Ring Light
F&V SKU: 21815004 | Helix SKU: FV21815004
Overview
This replacement Frost Diffusion Filter for the R-300 LED Ring Light gives a slight diffusion to the light and widens the beam angle. This diffuser can also act as a filter holder for gels by sandwiching them between the filter and the light. It also protects the front surface of the lights from dust and scratches. The magnetic mounting allows for quick and easy removal and swapping of filters. Compatible with the original R-300, R-300 SE, and R-300S SE Ring Lights.
Specification
Manufacturer: F&V
Country of Manufacture: China
Package Contents: (1x) R-300 Frost Diffusion Filter
F&V Grooved Foam Hand Grip with 1/4"-20 Male Thread 102050520101
$ 19.00 - Sold Out
F&V Grooved Foam Hand Grip with 1/4"-20 Male Thread 102050520101
The F&V Lighting Grooved Foam Hand Grip with 1/4"-20 Male Thread allows its attachment to a variety of accessories that contain a 1/4"-20 female thread. It also features a metal carabiner for greater accessibility and ease of transportation. The foam grip can be used to hold items ranging from an LED Light to an LCD monitor and has a grooved handle for a better grasp.
Features
- Strong and Lightweight
- Grooved Foam Grip for Better Grasp
- Metal Carabiner for greater accessibility and ease of transportation
F&V HG30-1 Honeycomb Grid 30° for K4000 SE and Z400S Soft
$ 79.50
F&V HG30-1 Honeycomb Grid 30° for K4000 SE and Z400S Soft
F&V SKU: 10314001 | Helix SKU: FV10314001
Overview
Narrow your lights output to 30 degrees. This grid uses the new push-button connectors found on the K4000 SE, K4000S SE, and the Z400S Soft. Not compatible with previous 1x1 panels.
Control the beam angle of the K4000 SE and Z400S Soft lights with the HG30-1 Honey Comb Grid. This grid narrows the beam of the light down to 30 degrees. The grid uses the new push-button mounts featured on the K4000 SE and Z400S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
F&V HG30-2 Honeycomb Grid 30° for Z800S Soft
$ 99.50
F&V HG30-2 Honeycomb Grid 30° for Z800S Soft
F&V SKU: 10314007 | Helix SKU: FV10314007
Overview
Narrow your lights output to 30 degrees. This grid uses the new push-button connectors found on the Z800S Soft. Not compatible with previous 1x2 panels.
Control the beam angle of the Z800S Soft light with the HG30-2 Honey Comb Grid. This grid narrows the beam of the light down to 30 degrees. The grid uses the new push-button mounts featured on the Z800S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
F&V HG45-1 Honeycomb Grid 45° for K4000/Z400
$ 79.50
F&V HG45-1 Honeycomb Grid 45° for K4000/Z400
F&V SKU: 10314005 | Helix SKU: FV10314005
Overview
Control the beam angle of the K4000 SE and Z400S Soft lights with the HG45-1 Honey Comb Grid. This grid narrows the beam of the light down to 45 degrees. The grid uses the new push-button mounts featured on the K4000 SE and Z400S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
Narrow your lights output to 30 degrees. This grid uses the new push-button connectors found on the K4000 SE, K4000S SE, and the Z400S Soft. Not compatible with previous 1x1 panels.
Specifications
| Barcode | N/A |
|---|---|
| Manufacturer | F&V |
| Country of Manufacture | China |
| Specifications | N/A |
| Package Contents | (1x) HG45-1 Honeycomb Grid |
| Product Weight (lb) | N/A |
F&V HG45-2 Honeycomb Grid 45° for Z800S Soft
$ 99.50
F&V HG45-2 Honeycomb Grid 45° for Z800S Soft
F&V SKU: 10314008 | Helix SKU: FV10314008
Overview
Control the beam angle of the Z800S Soft light with the HG45-2 Honey Comb Grid. This grid narrows the beam of the light down to 45 degrees. The grid uses the new push-button mounts featured on the Z800S Soft. Simply snap on the grid and it's secured to the light. To remove, press the buttons on each of the corners on the light. On the front of the grid is a clear plastic protector to help prevent damage to the metal grid.
Narrow your lights output to 45 degrees. This grid uses the new push-button connectors found on the Z800S Soft. Not compatible with previous 1x2 panels.
F&V Junior Clip 102040030101
$ 30.00 - Sold Out
F&V Junior Clip 102040030101
The F&V Lighting Junior Clip has a mouth opening of 1.75" and can attach to both flat and round tubes. It features two integrated female threads: one (1) 1/4"-20 and one (1) 3/8"-16. The Junior Clip tightens via a metal kip lever. Attach a variety of accessories via its available female threads onto poles or stands as needed. The Junior Clip has a reinforced rubber lining on the mouth that allows for a no slip grip. This clip is strong yet small in size and is easily stored in the pocket of your kit bag or clothing.
Features
- Strong Metal Kip Lever
- Reinforced Rubber Mouth
F&V Junior Joint Ball Head
$ 39.00 $ 19.99
F&V Junior Joint Ball Head
F&V SKU: 102070300101 | Helix SKU: FV102070300101
Overview
The F&V Lighting Junior Joint Pro Ball Head has a 1/4"-20 male thread on an articulating ball joint. It has a standard cold shoe to mount on to any camera's standard hot/cold shoe. On the underside of the cold shoe is 1/4"-20 female thread-in which can be used in conjunction with many photographic light stands - threading onto the 1/4"-20 male thread of the light stands 5/8" stud. The Junior Joint is strong enough to support the weight of 4x Z96 units linked together, or 2x Z180 units with batteries.
Features
- New design offers improved strength
- 1/4"-20 Male Thread on a Articulating Ball Joint
- Standard Cold Shoe
- 1/4"-20 Female Thread on Underside of Cold Shoe
F&V K12000 SE Daylight LED Studio Panel (V-Mount)
$ 1,149.00 $ 549.99
F&V K12000 SE Daylight LED Studio Panel (V-Mount)
F&V SKU: 18020503 | Helix SKU: FV18020503
Overview
Combined Strengths All-in-One
TLCI 99, CRI 95±2
Vibrant Color Reproduction
With a TLCI of up to 99 (97±2) and a CRI of up to 97 (95±2), the SE fixtures raise the color reproduction to new heights, representing colors truthfully, neutral and vibrant.
Increased Brightness
An advanced design results in even more brightness than previous generations could achieve. Yet also the new Special Editions maintain a wide beam angle to not sacrifice softness for brightness.
New Attachment System
Incorporating the new F&V attachment system for light shaping accessories, the SE fixtures are compatible with the full range of tools like barndoors, honeycomb grids, diffusers, filter-holders and softboxes.
Specifications
DIMENSIONS
Model
K12000 SE
K12000S SE
Item No.
18020502 (EU)
18020503 (US)
18020402 (EU)
18020403 (US)
EAN Code
6949773304325 (EU)
6949773304332 (US)
6949773304387 (EU)
6949773304394 (US)
Net Weight
3.7 kg (8.1 lbs)
3.7 kg (8.1 lbs)
Packed Weight
5 kg (11 lbs)
5 kg (11 lbs)
Packed Size
650×130×415 mm
650×130×415 mm
Note Protection Mark according to DIN 3
SPECIFICATION
PHOTOMETRIC DATA (preliminary results)
K12000 SE
with KS-1 Intensifier
K12000 SE
45° beam angle
50° beam angle
K12000S SE
with KS-1 Intensifier
K12000S SE
50° beam angle
45° beam angle
Item Includes
F&V K2000 Power Daylight LED Half-Panel (V-Mount)
$ 389.99 $ 189.99
F&V K2000 Power Daylight LED Half-Panel (V-Mount)
F&V SKU: 18022303 | Helix SKU: FV18022303
Overview
K2000 Power
Half Size - Full Brightness
Half Size - Full Brightness
With half the surface area in comparison to
the original K4000 Lumic we were able to
achieve a higher brightness than before at
1x1 size (K2000 Power: 2723 lux@1m 75°
beam angle, K4000 Lumic: 2475 lux@1m 60°), making the K2000 Power the perfect portable lightsource.
Perfect Travel Companion
Being compact in size, low in weight and
with a separate battery plate that can be
mounted on the bottom of the light stand
as a counterweight, the K2000 Power is
the perfect travel companion that also
works reliably on lightweight light stands.
New Attachment System
Incorporating the new F&V attachment
system for light shaping accessories, you
can mount light shaping tools like barndoors,honeycomb grids, diffusers, filterholders and softboxes easily and securely to the K2000 Power.
Specifications
https://www.fvlight.com/_files/ugd/749b47_485f4f1a51cd4317b8deb88fce642166.pdf
Item Includes
F&V K2000S Power Bi-Color LED Half-Panel (V-Mount)
$ 429.99 $ 189.99
F&V K2000S Power Bi-Color LED Half-Panel (V-Mount)
F&V SKU: 18022203 | Helix SKU: FV18022203
Overview
K2000S Power
Half Size - Full Brightness
Half Size - Full Brightness
With half the surface area in comparison to
the original K4000 Lumic we were able to
achieve a higher brightness than before at
1x1 size (K2000 Power: 2723 lux@1m 75°
beam angle, K4000 Lumic: 2475 lux@1m 60°), making the K2000 Power the perfect portable lightsource.
Perfect Travel Companion
Being compact in size, low in weight and
with a separate battery plate that can be
mounted on the bottom of the light stand
as a counterweight, the K2000 Power is
the perfect travel companion that also
works reliably on lightweight light stands.
New Attachment System
Incorporating the new F&V attachment
system for light shaping accessories, you
can mount light shaping tools like barndoors,honeycomb grids, diffusers, filterholders and softboxes easily and securely to the K2000 Power.
Specifications
https://www.fvlight.com/_files/ugd/749b47_485f4f1a51cd4317b8deb88fce642166.pdf
Item Includes
F&V K4000 Daylight LED Studio Panel (Anton Bauer) 109040010233
$ 455.00 - Sold Out
F&V K4000 Daylight LED Studio Panel (Anton Bauer) 109040010233
The F&V Lighting K4000 Daylight LED Studio Panel with 3-Stud Anton Bauer Plate is a lightweight and portable studio solution, integrating the newest technology in synchronous lighting, expandability and power LEDs. The perfect mobile studio lighting solution.
The new K4000 Daylight Studio Panel light sports 400 pure color power LEDs, offering 2860 Lux @ 1 meter in a self-contained 1'x1' unit. Carefully selected LEDs are put through multiple tests and evaluations to ensure perfect color balance and diode matching. This offers an absolute pure color consistency between LEDs and a clean daylight calibrated color (5600K).
The Milk-White Diffusion Filter with K4000, a dense diffusion filter that creates a true soft-box effect. The filter itself sits 5 cm in front of the light, held in place by four support rods. With the filter being offset from the face of the light, it allows the diffusion filter to be illuminated evenly and creating a proper single light source. Not only does this offer an ultra-soft light but creates just a single shadow. Unlike most 1'x1' panels with open face LED sources which have the tendency for each diode to create cross-angled shadows, the Milk-White Diffusion Filter eliminates this problem, giving you an ultra-soft bright light source.
F&V Lighting has expanded unique SmartSync Control Circuit (SCC) Studio Panels, allowing multiple K4000 Studio Panels to be linked in series. With optional SCC linking module, link unit together with standard CAT5 cables, or a standard DMX 512 module. When the lights are linked together, the SCC allows you to control light intensity and color temperature of all panels within the series from a single variable dimmer controller or similarly through a DMX board. The SmartSync Control Circuit offers 4 independent channels for linking light groups together.
Features
- Milk-White Diffusion Filter
- SmartSync Control Circuit (Optional)
- Variable Dimmer (0-100%)
- Efficient Power Consumption
- Wide Range of Operating Voltages
- Power with Anton Bauer Battery or AC Adapter
- Heat Free LED Technology
F&V K4000 Power Daylight LED Studio Panel (V-Mount)
$ 549.00 $ 99.99
F&V K4000 Power Daylight LED Studio Panel (V-Mount)
F&V SKU: 18022103 | Helix SKU: FV18022103
Overview
Maximum Brightness
Utilizing a new lens design, the K4000 Power offers incredible brightness whenever maximum output is needed. Maintaining a 60° wide beam angle the K4000 Power creates up to 7200 lux @ 1m and can still be powered by a single V-Mount battery.
Vibrant Color Reproduction
With a TLCI of up to 99 (97±2) and a CRI of up to 97 (95±2), the Power fixtures raise the color reproduction to new heights, representing colors truthfully, neutral and vibrant.
New Attachment System
Incorporating the new F&V attachment system for light shaping accessories, the Power fixtures are compatible to the full range of tools like barndoors, honeycomb grids, diffusors, filter holders and softboxes.
Specifications
| Barcode | 6949773305179 |
|---|---|
| Manufacturer | F&V |
| Country of Manufacture | China |
| Illuminance | 7200 lux @1m, 1800 lux @2m, 800 lux @3m |
| Color Temperature (CCT) | Daylight 5600K (+/-200K) |
| Beam Angle | 75° (45° Angle with KS-1 Intensifier - Sold Separately) |
| Color Rendition | TLCI 95-99 (97±2), CRI 93-97 (95±2) |
| Dimming | 0-100% Continuous |
| Estimated LED Lifetime | 50,000 Hours (15 years of average use) |
| Thermal Design | Silent Passive Cooling |
| Power Options | V-Mount Battery, AC Adapter, Please note Batteries are SOLD SEPARATELY |
| Power Consumption | 87 W Nominal, 90 W Maximum |
| Power Voltage | 13 - 24 V DC |
| Battery Lifetime | N/A |
| Mounting Options | Yoke with 5/8" Mount |
| Package Contents |
(1x) K4000 Power 1x1 LED Panel Light with V-Mount Plate (1x) V-Mount AC Adapter with Power Cord |
F&V K8000 Plus Daylight LED Studio Panel 2-light Kit (V-mount) 109041550231
$ 1,679.00 - Sold Out
F&V K8000 Plus Daylight LED Studio Panel 2-light Kit (V-mount) 109041550231
The K8000 Plus has an expansion port which allows for installation of the optional SmartSync Control Circuit (SCC) as well as a DMX512 Module. The SCC module allows you to daisy chain multiple units together via CAT5 cables. When chained together, any light modified in the chain will cause all the other lights to dim in unison. The DMX512 Module allows for control of the lights with standard DMX512 lighting console dimmer boards.
Specifications:
- Bulb: Plus LED
- LED Count: 800
- Beam Angle: 60°
- Power Variation: 0-100% (Stepless)
- Color Rendering Index (Ra): ≥90 ± 1.0
- Correlated Color Temperature (CCT): 5600K ±100K (Daylight Model)
- Operating Voltage: 10-18V DC
- Nominal Weight: 8 lb 4 oz / 3.74 kg (per indiv. light, excluding AC adapter and batteries)
- Nominal Size (L x W x H): 61 x 37.5 x 8 cm (at widest parts, including yoke)
- Power Options: Built-in V-mount, AC Power Adapter (AC operation of 90-265VAC 50/60Hz)
- Power Draw: 4W
- Max Current: 6.4A
Kit Includes
- (2) x K8000 Plus LED Studio Panel
- (2) x Milk Diffusion Filter
- (8) x Quick Release Rods for Milk Diffusion Filter
- (2) x AC Power Adapter
- (2) x Power Cable
- (2) x Safety Cable
- (4) x Replacment Fuses
- (1) x New K8000/Z1200 Carry Case with Wheels
F&V K8000S Plus Bi-Color LED 2-Light Kit (V-Mount)
$ 1,779.00 $ 399.99
F&V K8000S Plus Bi-Color LED 2-Light Kit (V-Mount)
F&V SKU: 109041570231 | Helix SKU: FV109041570231
Overview
The K8000 Plus utilizes the F&V Plus LED. The F&V Plus LED has an accurate color temperature and has a color rendering of CRI 90 +/- 1.0. At a 60° beam angle, 800 LEDs produce a bright, even beam of light which is perfect for shoots both in the studio or on location. The K8000 Plus comes packaged with the noteworthy Milk Diffusion Filter which creates a soft, glamorous light. The Milk Diffusion Filter now utilizes a snap-in, quick-release mounting system. This new mounting system will work in unison with additional accessories, giving users the ability to stack modifiers on top of one another. This secure mounting system allows the light to be rigged sideways or upside down without the possibility of accessories falling or sliding out.
The K8000 Plus has an expansion port which allows for installation of the SmartSync Control Circuit (SCC) as well as a DMX512 Module. The SCC module allows you to daisy chain multiple units together via CAT5 cables. When chained together, any light modified in the chain will cause all the other lights to dim in unison. The DMX512 Module allows for control of the lights with standard DMX512 dimmer boards.
F&V Kai Clip 102040020101
$ 25.00
F&V Kai Clip 102040020101
The F&V Lighting Kai Clip has a mouth opening of 1.75" and can attach to both flat and round tubes. It features two integrated female threads: one (1) 1/4"-20 and one (1) 3/8"-16. The Kai Clip tightens via a Kip Lever. Attach a variety of accessories via its available female threads onto poles or stands as needed. This clip is strong yet small in size and is easily stored in the pocket of your kit bag or clothing.
F&V KS-2 Soft Box & Intensifier with Grid for 2x1 LED Panels
$ 128.00 - Sold Out
F&V KS-2 Soft Box & Intensifier with Grid for 2x1 LED Panels - FV10310004
F&V SKU: 10310004
Quick Overview
The KS-2 is not only a soft box but also an intensifier. The reflective coating on the inside of the KS-2 focuses the light into a smaller beam angle which increases the brightness of the light up to 25%, while remaining to deliver a soft and even beam of light.
Intensifier for focused brightness
The KS-2 is not only a soft box but also an intensifier. The reflective coating on the inside of the KS-2 focuses the light into a smaller beam angle which increases the brightness of the light up to 25%, while remaining to deliver a soft and even beam of light.
Quick and easy setup
There is no complicated set-up with your KS-2. Just unfold the KS-2, and attach it to your light with two velcro straps.
Universal size
The KS-2 Soft Box can be adjusted to fit a wide variety of 1x2 panels from different manufacturers.
Two diffusion stages
Two diffusion stages allow for soft, even illumination across the face of the KS-2. Use one diffusion stage or both in order to adjust the softness and brightness of your light.
Grid for directional control
The KS-2 Soft Box includes a grid for directional control of your light. The grid attaches easily to the KS-2 via velcro.
| SKU | 10310004 |
|---|---|
| Highlights |
|
| Specs |
Nominal Dimensions of Soft Box Face: 30" x 18" Est. Light Increase without Diffusors: 1/3 stop Est. Light Loss with Close Diffusor: 1 stop (relative to increased brightness of light due to intensifier) Est. Light Loss with Far Diffusor: 1 stops (relative to increased brightness of light due to intensifier) Est. Light Loss with Close and Far Diffusor: 2 stops (relative to increased brightness of light due to intensifier) |
| Package Contents |
(1x) KS-2 Soft Box (1x) Inner Diffuser (1x) Outer Diffuser (1x) Grid (1x) Carry Bag |
F&V L-Bracket for R-300, R-300 SE, and R-300S SE (updated to adjust for larger cameras with grips.)
$ 49.00 - Sold Out
F&V L-Bracket for R-300, R-300 SE, and R-300S SE (updated to adjust for larger cameras with grips.)
F&V SKU: 18095000 | Helix SKU: FV18095000
Overview
This updated version of the Camera L-Bracket for the R-300 ring light features and adjustable camera bracket which allows for a larger selection of cameras to be mounted to the R-300 including DSLRs with battery grips. The system attaches to the light with a hex screw. A thumb screw allows you to adjust the camera bracket up and down to fit your camera. This updated L-Bracket is compatible with the original R-300, R-300 SE, and R-300S SE.
Specifications
| Barcode | N/A |
|---|---|
| Manufacturer | F&V |
| Country of Manufacture | China |
| Specifications | N/A |
| Package Contents |
(1x) L-Bracket SE (1x) Mounting Screw (1x) Allen Wrench |
| Product Weight (lb) | N/A |
F&V MDF-1 Milk Diffusion Filter Frame (allows use of barndoors with diffuser)
$ 74.95
F&V MDF-1 Milk Diffusion Filter Frame (allows use of barndoors with diffuser)
F&V SKU: 10316002 | Helix SKU: FV10316002
Overview
The MDF-1 Milk Diffuser Filter Frame is a Milk Diffuser with metal frame which you can attach barn doors (sold separately). The frame snaps into the new quick release mounting system from F&V.
Compatible with the Z400S Soft, K4000 SE, K4000S SE, K4000 Power, and K4000S Power. Older lights are compatible once their corners have been upgraded to the new system.
F&V Metal Ball Head 102070250001
$ 19.99
F&V Metal Ball Head 102070250001
The F&V Lighting Metal Ball Head has a 1/4-20 male thread on top of a pivoting ball-joint, offering cold shoe mounting to accessories with a 1/4-20 female thread. The ball-joint allows for easy positioning of accessories. A tightening knob on the side of this item holds ball joint in place.
Features
- Great for mounting monitors, small lights and microphones
- Give Cold Shoe Mounting to Video Accessories
- Ball-joint Offers Easy Positioning of Accessories
F&V MeticaFM 7 HDMI 108010060201
$ 329.00 - Sold Out
F&V MeticaFM 7 HDMI 108010060201
The F & V MeticaFM 7 is a rugged 7" monitor with a vibrant 1024 x 600px display. The MeticaFM 7 HDMI has a 170-degree viewing angle, 8-bit color depth and a 800:1 contrast ratio which makes it an ideal monitor not only for reference but also for focus pulling. The MeticaFM 7 HDMI has a lightweight and strong aluminum body with four 1/4""-20 thread-ins, one on each of its four side. The MeticaFM 7 HDMI has both an HDMI IN as well as an HDMI OUT with the ability to loop through.
The base software that accompanies the MeticaFM 7 HDMI software includes: focus peaking, variable scan modes and adjustable frame guides. An optional hardware upgrade, available at the time of purchase or anytime down the road, will allow for the MeticaFM 7 HDMI to have advanced software functionality which includes: pattern generator, false color, range error, histogram and audio columns. The MeticaFM 7 HDMI will be capable of future firmware upgrades via its integrated mini-USB input. The MeticaFM 7 HDMI has several available power options like a Sony NP-F battery plate, a DC2.5mm jack and Mini-XLR. The Mini-XLR can also be used for multi-camera shoots to receive a tally signal from the switch-board, illuminating the monitor's integrated Tally Light.
Features
- 7" LCD Display with 1024x600px Resolution
- 4x 1/4""-20 Mounting Options (one on each side)
- Multiple Power Options such as Sony NP-F, DC2.5mm, Mini-XLR
- Basic and Advanced Software Options
F&V MeticaFM 7 HDMI Plus 108010090201
$ 399.00 - Sold Out
F&V MeticaFM 7 HDMI Plus 108010090201
The F & V MeticaFM 7 HDMI Plus 7" LCD Monitor defines itself from the base model of the Metica by including all of the premium software available to this monitor. The hardware upgrade is pre-installed into the Metica Plus units. The premium software includes: focus peaking, false color, histogram, variable scan modes, adjustable frame guides, pattern generator, range error and audio columns. The F & V MeticaFM 7 HDMI Plus is a rugged 7" monitor with a vibrant 1024 x 600px display. The MeticaFM 7 HDMI Plus has a 170-degree viewing angle, 8-bit color depth and a 800:1 contrast ratio which makes it an ideal monitor not only for reference but also for focus pulling.
The MeticaFM 7 HDMI Plus has a lightweight and strong aluminum body with four 1/4"-20 thread-ins, one on each of its four side. The MeticaFM 7 HDMI Plus has both an HDMI IN as well as an HDMI OUT with the ability to loop through. It has several available power options like a Sony NP-F battery plate, a DC2.5mm jack and Mini-XLR. The Mini-XLR can also be used for multi-camera shoots to receive a tally signal from the switch-board, illuminating the monitor's integrated Tally Light. It will be capable of future firmware upgrades via its integrated mini-USB input.
Features
- 7" LCD Display with 1024x600px Resolution
- 4x 1/4"-20 Mounting Options (one on each side)
- Multiple Power Options like Sony NP-F, DC2.5mm, Mini-XLR
- It has Basic and Advanced Software Options
Package Contents:
(1) x D-tap to Mini-XLR Cable
(1) x Regular HDMI Right Angle Mini-HDMI
(1) x D-tap to DC2.5mm
(1) x AC Power Adapter 12V/1A/DC2.5mm
F&V Milk Diffusion Filter for R-300 Ring Light
$ 25.00 $ 18.00 - Sold Out
F&V Milk Diffusion Filter for R-300 Ring Light
F&V SKU: 118151010000 | Helix SKU: FV118151010000
Overview
Using our unique method of mounting filters with magnetics, our Milk Diffusion Filter for the R-300 LED Ring Light is a denser option for diffusion, creating an ultra-soft light source. Not only does this offer beautiful, wrapping light, but also the thick diffusion makes it much easier for your talent to look in the direction of the light.
Specifications
| SKU | 118151010000 |
|---|---|
|
Using our unique method of mounting filters with magnetics, our Milk Diffusion Filter for the R-300 LED Ring Light is a denser option for diffusion, creating an ultra-soft light source. Not only does this offer beautiful, wrapping light, but also the thick diffusion makes it much easier for your talent to look in the direction of the light. |
|
| Highlights |
True Soft-Box Effect Beautiful Light that Wraps Around Your Subject Easier on Your Talents Eyes |
| Specs | No |
| Package Contents | (1x) Milk Diffusion Filter |
| Feature Tags | Magnetic Filters |
F&V Milk Diffusion Filter for Z720 / R720 118151030000
$ 45.00
F&V Milk Diffusion Filter for Z720 / R720 118151030000
The F & V Milk Diffusion Filter for Z720/R720 softens the beam of your light creating a beautiful, wrapping light.
F&V Milk Diffusion Filter for Z96 LED Video Light 118120010000
$ 14.99 - Sold Out
F&V Milk Diffusion Filter for Z96 LED Video Light 118120010000
The F&V Lighting Milk Diffusion Filter for the Z96 LED Video Light. Using this unique method of mounting filters with magnetic; Milk Filter is a denser option for diffusion, creating an ultra-soft light source. Not only does this offer beautiful, wrapping light, but also the thick diffusion makes it much easier for your talent to look in the direction of the light.
Features
- True Soft-Box Effect
- Beautiful Light that Wraps Around Your Subject
- Easier on Your Talents Eyes
F&V NP-F to 3-Stud (AB Gold Mount) Adapter w/ Batteries Kit 121030028001K
$ 143.99 - Sold Out
F&V NP-F to 3-Stud (AB Gold Mount) Adapter w/ Batteries Kit 121030028001K
Don't want to spend big bucks on expensive, large-capacity, li-ion batteries? Then try their new NP-F to 3-Stud Adapter. Utilizing the power of 2x NP-F batteries in series, these adapters allow you to power a variety of products, from 1x1 panels to cameras rigs, for hours at a time. This is a perfect solution for powering F&V's K4000 and Z400 LED Studio Panels, but it will also work with almost any 1x1 panel on the market.
Whether utilizing NP-F550 or NP-F770 batteries, this adapter is an inexpensive alternative to power your gear. You can have multiple, inexpensive NP-F batteries on stand-by to ensure you never run out of power. The NP-F to 3-Stud Adapter will most definitely to increase your flexibility when shooting on location. Allows you to adapt Sony NP-F batteries to gear already running on V-mount batteries. Take advantage of the NP-F batteries you have lying around and put them to use.
F&V NP-F to 3-stud Power Adapter (AB Gold Mount) 121030028001
$ 54.99
F&V NP-F to 3-stud Power Adapter (AB Gold Mount) 121030028001
Don't want to spend big bucks on expensive, large-capacity, li-ion batteries? Then try the F&V Lighting NP-F to 3-Stud Power Adapter (AB Gold Mount). Utilizing the power of 2x NP-F batteries in series, this adapter allows you to power a variety of products, from 1x1 panels to cameras rigs, for hours at a time. This is a perfect solution for powering F&V Lighting's K4000 and Z400 LED Studio Panels, but it will also work with almost any 1x1 panel.
Whether utilizing NP-F550 or NP-F770 batteries, this adapter is an inexpensive alternative to power your gear. You can have multiple, inexpensive NP-F batteries on stand-by to ensure you never run out of power. The NP-F to 3-stud Adapter will most definitely to increase your flexibility when shooting on location.
Features
- Allows you to adapt Sony NP-F batteries to gear already running on Anton Bauer/3-stud batteries. Take advantage of the NP-F batteries you have lying around and put them to use
F&V NP-F to V-mount Adapter w/ Batteries Kit 121030018001K
$ 143.99 - Sold Out
F&V NP-F to V-mount Adapter w/ Batteries Kit 121030018001K
Don't want to spend big bucks on expensive, large-capacity, li-ion batteries? Then try their new NP-F to V-mount Adapter. Utilizing the power of 2x NP-F batteries in series, these adapters allow you to power a variety of products, from 1x1 panels to cameras rigs, for hours at a time. This is a perfect solution for powering F&V's K4000 and Z400 LED Studio Panels, but it will also work with almost any 1x1 panel on the market.
Whether utilizing NP-F550 or NP-F770 batteries, this adapter is an inexpensive alternative to power your gear. You can have multiple, inexpensive NP-F batteries on stand-by to ensure you never run out of power. The NP-F to V-mount Adapter will most definitely to increase your flexibility when shooting on location. Allows you to adapt Sony NP-F batteries to gear already running on V-mount batteries. Take advantage of the NP-F batteries you have lying around and put them to use.
F&V NP-F to V-mount Power Adapter 121030018001
$ 54.99
F&V NP-F to V-mount Power Adapter 121030018001
Don't want to spend big bucks on expensive, large-capacity, li-ion batteries? Then try the F&V Lighting NP-F to V-Mount Power Adapter. Utilizing the power of 2x NP-F batteries in series, this adapter allows you to power a variety of products, from 1x1 panels to cameras rigs, for hours at a time. This is a perfect solution for powering F&V Lighting's K4000 and Z400 LED Studio Panels, but it will also work with almost any 1x1 panel.
Whether utilizing NP-F550 or NP-F770 batteries, this adapter is an inexpensive alternative to power your gear. You can have multiple, inexpensive NP-F batteries on stand-by to ensure you never run out of power. The NP-F to V-mount Adapter will most definitely to increase your flexibility when shooting on location.
Features
- Allows you to adapt Sony NP-F batteries to gear already running on V-mount batteries. Take advantage of the NP-F batteries you have lying around and put them to use
F&V Nylon Carry Case for 1x1 LED Panels
$ 149.00 - Sold Out
F&V Nylon Carry Case for 1x1 LED Panels - FV105010210001
Nylon Carrying Case by F&V is designed to fit a quantity of three (3) LED panels in the 1x1 form factor. They Nylon Carrying Case is a hard case with nylon stitching on the outside. The corners and bottom of the case are reinforced with impact plastic. The case comes with two large dividers to separate and protect each light, as well as it comes with three smaller dividers for accessories.
| SKU | 105010210001 |
|---|---|
| Highlights |
Nylon outer fabric over rigid, padded frame Reinforced impact corners and bottom sled Packaged with carrying strap, three (3) large dividers, and three (3) small dividers |
| Specs |
Outside Dimensions: 20" L x 11" D x 18" H Inside Dimensions: 19" L x 9" D x 14.5" H |
| Package Contents |
(1x) Case (1x) Carrying Strap (2x) Large Dividers (3x) Small Dividers |
F&V Nylon Carry Case for K4000 Kit 20901027
$ 149.00 - Sold Out
F&V Nylon Carry Case for K4000 Kit 20901027
F&V R-300 Lens Mount System
$ 49.00
F&V R-300 Lens Mount System
F&V SKU: 18095400 | Helix SKU: FV18095400
Overview
This kit enables you to mount your R-300 onto the front of the camera lens. The mount is compatible with the original R-300, R-300 SE, and R-300S SE. The mount consists of five parts. Two halves screw together on each side of the R-300. This base mount has an 82mm thread. The additional parts are step down rings that will allow the light to be mounted on 77mm, 72mm, and 67mm lens filter threads.
Please note: When the light is mounted to your lens we strongly recommend against powering the light with batteries. The added weight to the lens from the battery may have the ability to cause damage to certain lenses. We recommend using an AC Adapter or 2.5mm to D-Tap cable to power the light.
| Package Contents |
(1x) Lens Mount with 82mm Thread (1x) 82mm - 67mm Lens Adapter Ring (1x) 82mm - 72mm Lens Adapter Ring (1x) 82mm - 77mm Lens Adapter Ring |
|---|
F&V R-300 Travel Case
$ 30.00
F&V R-300 Travel Case
F&V SKU: 33905070 | Helix SKU: FV33905070
Overview
This travel case fits the original R-300, R-300 SE, and R-300S SE like a glove. The case is large enough to fit the light, filters, and a small np-f battery. Because of it's compact size, the case does not have enough room to fit the AC Adapter and L-Bracket when the light is inside.
| Package Contents | (1x) Travel Case for R-300 |
|---|
F&V R300 LED Ring Light with RS-1 Softbox 30x40 and Bracket Bundle 118152010001k2
$ 298.00 - Sold Out
F&V R300 LED Ring Light with RS-1 Softbox 30x40 and Bracket Bundle 118152010001k2
The F&V Lighting R-300 Soft Box will allow you to modify your light, creating a larger, soft, single source light. This becomes the perfect solution for interviews, portraits and product photography. Your imagination is the limit to this tool's application. The soft box also comes packaged with a velcro honey comb which allows you to focus the light's beam and reduce spill. The R-300 Soft Box is made from a thick, high-quality nylon. Four large flaps in the back make it easy to install the soft box rods and R-300 with Bracket. A designated notch in one of the flaps makes accessing your R-300's dimmer knob easy.
Features
- Softens Light and Increases Area of Light Source
- Lightweight and Durable
- Bracket can be used with the Soft Box or an Umbrella
- Removable Velcro Honey Comb
F&V Replacement Dimmer Knob for K4000/K4000S
$ 3.95
F&V Replacement Dimmer Knob for K4000/K4000S
F&V SKU: K4000DIMMERKNOB / Helix SKU: FVK4000DIMMERKNOB
F&V Replacement Quick Release Mounts for Milk Diffusion Filter (4-Pack)
$ 14.95
F&V Replacement Release Mounts for Milk Diffusion Filter (4-Pack)
F&V SKU: 34101272 / Helix SKU: FV34101272
Replacement Quick Release Mounts for Milk Diffusion Filter (4 Pack)
Only works with quick release corners.
F&V Replacement Thumb Screw for 5/8" Receptacle
$ 6.95 - Sold Out
F&V Replacement Thumb Screw for 5/8" Receptacle
F&V SKU: 43201031 Helix SKU: FV43201031
(K4000 / R-300 L-Bracket)
F&V RS-1 Softbox 30x40 and Bracket for R-300 LED Ring Light 118152010101
$ 99.00
F&V RS-1 Softbox 30x40 and Bracket for R-300 LED Ring Light 118152010101
The RS-1 Softbox 30x40 and Bracket is the perfect companion for the world famous R-300 LED Ring Light. What separates the R-300 LED Ring Light from its competition is its accurate color rendering, multiple power options, bright output, and its ability to function as both an on-camera light and and off-camera light. F&V now offers the perfect tool to expand the R-300's functionality, a softbox.
The RS-1 Softbox 30x40 will allow you to modify your light, creating a larger, soft, single source light. This becomes the perfect solution for interviews, portraits, and product photography. Your imagination is the limit to this tool's application. The softbox also comes packaged with a velcro honey comb which allows you to focus the light's beam and reduce spill.
The RS-1 Softbox 30x40 is made from a thick, high-quality nylon. Four large flaps in the back make it easy to install the soft box rods and R-300 w/ Bracket. A designated notch in one of the flaps makes accessing your R-300's dimmer knob easy. The R-300 mounts to a matte-black, aluminum bracket system which functions as the soft box's speed ring. On this bracket are four receptacles that hold the soft box rods. The bracket has a 5/8'' stud that allows you to mount the softbox system using a c-stand or universal holder. The center of this 5/8'' stud is hollow which allows you to mount a translucent or reflective umbrella to the unit.
Highlights
- Softens Light and Increases Area of Light Source
- Lightweight and Durable
- Bracket Can Be Used w/ the Soft Box or an Umbrella
- Removable Velcro Honey Comb
- Softbox Made from Durable Nylon
- Bracket Made from High Quality Aluminum
- Face Dimensions: ~ 16"x12" (40 x 30 cm)
- Depth of Box incl. 5/8" Stud: ~16"
- Weight incl. Bracket: 14 oz/ 396 grams
(1) x RS-1 Softbox 30x40 for R-300 LED Ring Light
(1) x Bracket for Softbox (composed of 5 pieces)
(1) x Honey Comb for Soft Box
(1) x Carry Bag
100% Fun Times!
Please Note that the Umbrella Featured in the Photos is NOT Included in this kit
F&V S120A Camera Slider 108060060101
$ 249.99 - Sold Out
F&V S120A Camera Slider 108060060101
The S120A is a 42" aluminum alloy camera slider that can handle heavy payloads. The S120A camera slider has a full 45" of linear movement end to end. Built with performance in mind, the S120A's carriage sports (4) ultra-smooth bearings making for quiet, effortless performance. The S120A slider is the smoothest slider on the market.
The S120A's sliding carriage has a 3/8"-16 male thread, the standard for mounting tripod heads. The carriage has a locking knob as well as a bubble level.
Adjustable all-terrain legs with rosette-locking joints ensure the S120A stays rigid in form. Set the slider on the ground for low-profile shots on rough, jagged surfaces. The legs have threaded feet for fine tuning adjustments, ensuring you have a level, perfect shot.
Two mounting configurations give you the possibility to achieve the perfect shot. Either mount onto a single tripod with the offset mounting plate for ease of use, or use the mounting threads on the end-caps for mounting vertically to acheive jib-like movements. Please see below for more specifications on the location of the threads.
The S120A's compact form factor makes it easy to travel between locations. The included carrying case with velcro handles securely holds the slider in place when traveling. Setup and breakdown is effortless, just like the S120A's performance. The S120A is a rugged piece of equipment that will bring a professional touch to all of your work.
Highlights
- Thicker, stronger, stainless steel guide rail
- Made of Aluminum Alloy
- Adjustable Terrain Legs
- Offset Mounting Plate
- Multiple Mounting Thread Locations
Material: Aluminum Alloy
Nominal Weight: 9.8 lbs
Nominal Dimesions: 44" X 5" X 3.5"
Maximum Load: 30 lbs
Package Contents- S120A 42" Camera Slider
- (X2) Detachable Slider Legs
- Carrying Bag
F&V SmartSync Control Link Module : K4000/K4000S 10911008
$ 99.00 - Sold Out
F&V SmartSync Control Link Module : K4000/K4000S 10911008
Keep your K4000 and K4000S in sync. Using the SmartSync Control circuit, link multiple K4000 or K4000S LED Studio Panels together for consistent output and CCT (for K4000S). This user-expandable module is quick to install and perfect for gaining complete control over your K4000/K4000S panels. Users can link multiple panels together using standard CAT5 ethernet cables.
If looking to connect into a DMX compatible board, please see the DMX Linking Module for more linking options!
User-expandable SmartSync Control circuit for the K4000 and K4000S Studio Panels. Users can link multiple panels together using standard CAT5 ethernet cables. Link Studio Panels together and keep intensity and CCT (for the K4000S) in sync. Perfect for studio applications for rigged lights needing consistent output and setting.
