$ 9.95
ProMaster SKU: 4337 | Helix SKU: PR4337
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
$ 9.95
ProMaster SKU: 7732 | Helix SKU: PR7732
ProMaster Body Caps keep dust and dirt out of your camera body when you are storing it with the lens removed.
$ 24.95
$ 24.95
$ 24.95
Promaster SKU: 4233 | Helix SKU: PR4233
Protects your camera’s LCD while preserving touch screen functions. It is easily applied through static adhesion – no messy adhesives! Special multi-coatings make this shield highly resistant to water, oil, fingerprints, and nose prints. It is constructed of hardened optical shatter-proof glass for maximum damage protection.
Dimensions: 70.88 mm W x 51.9 mm H
Fits: Sony A7III, A7RIII, A7II, Sony A7RII, Sony A7SII, Sony RX100, Sony RX100 II, Sony RX100 III, Sony RX100 IV, Sony RX100 V, RX100 VA, RX100 VI, RX10, RX10 II, RX10 III, RX19 IV, Sony RX1, Sony RX1R, Sony RX1R II
$ 29.95
PROMASTER batteries are a high quality, long lasting power source for your digital camera or camcorder. All PROMASTER replacement batteries are manufactured to meet or exceed the equipment manufacturer's specifications. Fits Sony Cyber-Shot DSC-S750, S780, S950, S980, DSC-W180, W190; Sony Webbie HD MHS-PM1, CM1 Replaces Sony NP-BK1 3.6V 970mAH Lithium Ion
$ 11.00
PROMASTER batteries are a high quality, long lasting power source for your digital camera or camcorder. All PROMASTER replacement batteries are manufactured to meet or exceed the equipment manufacturer's specifications. Specifications • 3.6V 700mAH Lithium Ion • Replaces Sony InfoLithium NP-FT-1
$ 39.95 - Sold Out
ProMaster SKU: 5192 | Helix SKU: PR5192
Replaces Sony NP-F570
Runtime in a ProMaster VL800D: 50 minutes
$ 49.95 - Sold Out
ProMaster SKU: 5199 | Helix SKU: PR5199
$ 29.95 - Sold Out
ProMaster SKU: 5628 | Helix SKU: PR5628
ProMaster batteries are a high quality, long lasting power source for your digital camera or camcorder. ProMaster replacement batteries are manufactured to meet or exceed the equipment manufacturer's specifications.
+ 3.6V 1000MAH Lithium Ion
+ Replaces Sony InfoLithium NP-BG1
$ 79.95
$ 21.95
$ 99.95
$ 44.95
$ 99.95
$ 79.95
$ 34.95
$ 39.95
ProMaster SKU: 9176 | Helix SKU: PR9176
The ProMaster Traveler + Lithium Ion Battery Charger is a versatile, compact, go anywhere charger for your Li-ION digital camera and camcorder batteries. The Traveler + charger features a built in switching power supply that can be powered from either 110v - 240v AC or 12V DC (optional DC power cord required) for true worldwide compatibility. Combined with the USB power output port and its compact size, it makes a PERFECT solution for those on the go or to use at home. The ProMaster Traveler + charger is available in models to fit most Li-ION digital camera batteries.
• Charges most batteries in 2 hours or less.
• Compact and light weight with no wires and no A/C adapters. Simply plug it in and charge your battery.
• Power with 110v - 240v AC or 12v DC (optional cord required)
Input Power: 100 - 240 V AC, 50/60 Hz | 12 - 24 V DC (for DC In Socket)
Output Power: 4.2 V / 8.4 V DC, Max. 750 mA (with auto detection) | 5.0 V DC Max. 650 mA (for USB Power Port)
This charger will charge the following Canon batteries:
This charger will charge the following Fuji batteries:
This charger will charge the following Minolta batteries:
This charger will charge the following Nikon batteries:
This charger will charge the following Olympus batteries:
This charger will charge the following Panasonic batteries:
This charger will charge the following Pentax batteries:
This charger will charge the following Ricoh batteries:
This charger will charge the following Samsung batteries:
This charger will charge the following Sony batteries:
$ 39.95
ProMaster SKU: 3056 | Helix SKU: PR3056
The ProMaster Traveler + Lithium Ion Battery Charger is a versatile, compact, go anywhere charger for your Li-ION digital camera and camcorder batteries. The Traveler + charger features a built in switching power supply that can be powered from either 110v - 240v AC or 12V DC (optional DC power cord required) for true worldwide compatibility. Combined with the USB power output port and its compact size, it makes a PERFECT solution for those on the go or to use at home. The ProMaster Traveler + charger is available in models to fit most Li-ION digital camera batteries.
• Charges most batteries in 2 hours or less.
• Compact and light weight with no wires and no A/C adapters. Simply plug it in and charge your battery.
• Power with 110v - 240v AC or 12v DC (optional cord required)
This charger will charge the following Sony batteries:
$ 399.99
Sony SKU: NPA-MQZ1K | Helix SKU: SYNPAMQZ1K
Two NP-FZ100 batteries are included in the kit
For extended shooting
This battery adapter can load four NP-FZ100 Z-series batteries and supports extended shooting.
Supply power to a camera compatible with Z- or W-series2 battery
This Multi Battery Adapter Kit can connect and supply electric power to a camera that uses either an NP-FZ100 Z-series or NP-FW50 W-series2battery. By removing the cover for Z-series battery (figure [A]), the power plate (figure [B]) fits cameras compatible with W-series battery.
Select power supply or battery charge
DC OUT/CHARGE switch placed at the center of the control panel allows you to choose either supplying power from the batteries or charging the batteries.
Setting flexibility for varied shooting scenes
This battery adapter provides three screw sockets on both top and bottom of the unit (a total of 6 sockets), allowing a flexible rig setup using a mounting plate and screws.
Turn into a more compact size
If you remove battery protector and put battery port covers into place, Multi Battery Adapter turns into a smaller easy-to-carry adapter for two batteries.
Weight: Approx. 14.2 oz (400 g) (Not including battery)
$ 79.99
Sony SKU: NP-FZ100 | Helix SKU: SYNPFZ100
Dimensions (W x H x D): Approx. 1-9/16 x 29/32 x 2-1/8" (38.7 x 22.7 x 51.7 mm)
Weight: Approx. 3.0 oz (83 g)
Capacity: 7.2 V/16.4 Wh (2,280 mAh)
$ 29.99
Sony SKU: RMT-DSLR2 | Helix SKU: SYRMTDSLR2
Designed for SLT and Compact System Cameras (NEX): Compatible with a range of NEX and SLT cameras so you can take control of photo and movie composition from a distance
Stop and start the movie action: With wireless controls to stop and start movies you can direct the action while your camera stays in the perfect shooting position
Perfect for self-portraits and wildlife shots: With a wireless infrared connection you can release the shutter when you’re in the shot or hidden away from the camera
Totally avoid camera shake: With the remote commander, you can remotely and accurately release the shutter without touching your camera
Capture different types of image: Self-portraits are simple, and long-exposure shots are possible with the remote two-second shutter release
View images and control settings remotely: You’ll find it a handy way to watch slideshows, movies and adjust settings without touching your camera
$ 349.99 $ 299.99
Sony SKU: VG-C3EM | Helix SKU: SYVGC3EM
Equal vertical and horizontal operability
VG-C3EM body design makes it almost equally easy to control the camera in vertical and horizontal positions, thanks to keys and controls that are nearly the same as those on the back of the camera body. For example, the vertical grip provides a Multi Selector for fast selection of an AF point.
Grip shape for assured hold
VG-C3EM has a grip shape, which allows you to get an enhanced hold for confident shooting in vertical position that is virtually the same as that in horizontal position.
Nearly 2x longer stamina
VG-C3EM vertical grip loads two NP-FZ100 batteries in its housing. You can check the camera LCD monitor to see the remaining power of the battery in use as a percentage (1% minimum unit) on the power indicator. When the power of one battery runs out, the other battery automatically switches on to continue operation.
USB power charging via camera body
You can charge batteries loaded in the vertical grip, using the camera’s USB port without detaching the grip from the camera body.3
Highly rigid magnesium for exterior
Made of magnesium alloy, the same as α9, this grip is highly rigid and lightweight.
Notice
The simultaneous installation of this unit with the LA-EA2/EA4 mount adapter is not supported. If both are installed at the same time, the narrow clearance between the unit and the lens mount adapter makes it hard to hold the grip.
$ 27.95
Volta SKU: VA1240 | Helix SKU: VA1240
Overview