$ 449.00 - Sold Out
SeaLife SKU: SL671 | Helix SKU: SL671
Powerful 2500 lumen LED light using the latest COB LED array technology
One button control for easy operation - one button to power light on/off and select brightness
Three brightness levels: 100%, 50% and 25%
Hidden emergency signal mode: 1 second blink interval and SOS Morse code
60 minute burn time at full power and constant brightness
Depth rated to 200 feet/60 meters
Easy to expand with Flex-Connect™ trays, grips and Flex Arms, handle, Y-S, ball joint, cold shoe and other accessories
Quick-release button to detach light and aim in crevices and hard to reach areas
120° wide beam angle evenly illuminates the subject with no hot spots (90° underwater)
Corrosion-proof metal light head for heat dispersion and durability
Removable 25W Li-Ion battery w/ charger and international plug adapters included
Waterproof battery compartment - even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics
Universal mounting screw fits SeaLife and other brands of underwater cameras w/ standard ¼-20 tripod mount
Sea Dragon 2500 Underwater Photo/Video Light head
Flex-Connect Single Tray w/ standard ¼-20 mounting screw
Flex-Connect grip
25Wh Lithium Ion rechargeable battery
AC Power Adapter, charging tray, and international plug adapters
Adapter for GoPro cameras with acorn nut
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Sea Dragon Case
Sea Dragon 2500 Photo/Video/Dive Light Specifications
Body Material | Anodized aluminum light head with fiber-reinforced polycarbonate body |
Light Source/Bulb Type | 1 x COB LED array (COB - Chip On Board) |
Brightness | 2500 lumens (maintains 2500 lumens throughout burn time at full power) |
Effective Range | 4 ft/1.2 m (depends on camera model and visibility) |
Brightness Levels | Full power (100%), half power (50%), and quarter power (25%) |
Button Control | Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle] |
Light Modes | Constant light or emergency signal light (activated by long push of power button); one second flash or SOS at full power |
Color Temperature | 5000K |
Color Rendering Index* | 90 |
Beam Angle | 120 degrees (90-degrees underwater) |
Battery | Lithium Ion 7.4V, 3400 mAh, 25Wh (included) |
Battery Charge Time | 170 minutes |
Run Time | 60 minutes at full power/120 minutes at half power/240 minutes at quarter power |
Depth | Tested to 200 feet/60 meters |
Dimensions |
4.8" x 2.2" x 3.8" (12.2cm x 5.6cm x 9.7cm), head only |
Weight | 9oz (255g) head only without battery ; 12.9oz (365g) head with battery |
Bulb Life | 35,000 hours |
O-ring | Dual NBR o-rings (lube included) |
Buoyancy |
Negative |
*CRI is a measure of a light source's ability to show object colors "realistically" or "naturally" compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.
$ 29.00
SeaLife SKU: SL994 | Helix SKU: SL994
Connect underwater lights and flashes using a Y-S mount
The Flex-Connect Y-S Adapter easily connects any underwater light or flash using a Y-S mount to Flex-Connect grips, trays, arms, cold shoe mount, and other accessories - with no need to worry about compatibility issues. The Y-S Adapter rotates on its base left and right, and has up and down directional control by angling the light on the mount.
Easily expand with Flex-Connect accessories
Quickly and easily expand your underwater camera with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
$ 149.00 - Sold Out
SeaLife SKU: SLKIT02 | Helix SKU: SLKIT02
Includes Flex-Connect Single Tray, Grip, Flex Arm, and Y-S Adapter
Instantly add a grip, light, flash or Flex Arm to the Single Tray with just a "click!" and remove it with the push of a button
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
$ 799.00 - Sold Out
SeaLife SKU: SL988 | Helix SKU: SL988
The Sea Dragon Duo X2 Flash includes Flex-Connect Dual Tray, two Grips, and two Sea Dragon Flashes
Sea Dragon Flash:
Universal - Works with SeaLife cameras (excluding Micro HD/HD+, Micro 2.0), Olympus, Canon, Sony, Nikon, and other brands of underwater cameras that have a built-in flash
Auto Mode automatically adjusts flash brightness for optimal image exposure
Variable power adjustment allows user to manually fine-tune flash brightness for desired effect and image exposure
Easy to expand with Flex-Connect™ trays, grip and Flex Arms
Depth rated to 200 feet/60 meters
Quick-release button to detach flash and aim in crevices and hard to reach areas
Universal mount fits all SeaLife cameras and other brands of underwater cameras with standard tripod mount
Auto Learn Mode easily syncs pre-flash with any digital camera
Effective underwater distance range up to 8 feet/2.5 meters
Approximately 150 flashes with 4 AA batteries (not included)
Waterproof battery compartment
Includes universal optical cable plug (SL96307) which connects the Sea Dragon Flash optical cable to Olympus, Sea & Sea and other underwater housings using the standard 7mm optical flash port
Two Sea Dragon Digital Underwater Flash heads with Flash Diffusers
Flex-Connect Dual Tray with standard 1/4-20 mounting screw
Two Flex-Connect Grips
Optical Cable and Universal Flash Link Adapters
Two Optical Cable Plugs (For Olympus, Sea&Sea and other housings using a 7mm optical cable flash port)
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Travel case
Sea Dragon Flash Specifications
Guide Number | 20m full power/1.5m low power |
Power Adjustment Range | 8% to 100% (In Auto or Manual Modes) |
Controls | Power (On/Off), Test (Program), Brightness (Manual/Auto) |
Coverage Angle | 80° horizontal x 60° vertical (100° with included diffuser) |
Color Temperature | 5700 degrees Kelvin |
Power Source | 4 AA batteries (NiMH recommended) |
Battery Life | 150 flashes |
Recycle Time | 1 second at < 1/2 power / 5 seconds at full power |
Buoyancy | Negative |
Housing Material | Fiber-reinforced polycarbonate |
Hardware | Marine grade stainless steel |
O-ring Material | Dual NBR o-rings (lube included) |
Weight | 18 ounces (509 grams), head with batteries |
Dimensions | Head: 5"(12.7cm) x 4.5" (11.4cm) x 2.5" (6.4cm) |
$ 899.00 - Sold Out
SeaLife SKU: SL989 | Helix SKU: SL989
The Sea Dragon Duo 5000 includes Flex-Connect Dual Tray, two Grips, and two powerful Sea Dragon 2500 lumen COB LED lights
Powerful 2500 lumen LED lights using the latest COB LED array technology
One button control for easy operation - one button to power light on/off and select brightness
Three brightness levels: 100%, 50% and 25%
60 minute burn time at full power and constant brightness
Depth rated to 200 feet/60 meters - Guaranteed
Easy to expand with Flex-Connect™ trays, grips and Flex Arms, handle, Y-S, ball joint, cold shoe and other accessories
Quick-release button to detach light and aim in crevices and hard to reach areas
120° wide beam angle on each light evenly illuminates the subject with no hot spots - the combination of two lights is ideal for wide-angle cameras like the Micro HD and GoPro
Corrosion-proof metal light head for heat dispersion and durability
Removable 25W Li-Ion battery w/ charger and international plug adapters included
Waterproof battery compartment - even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics
Universal mounting screw fits SeaLife and other brands of underwater cameras w/ standard ¼-20 tripod mount
Two Sea Dragon 2500 Underwater Photo/Video/Dive Light heads
Flex-Connect Dual Tray w/ standard ¼-20 mounting screw
Two Flex-Connect grips
Two 25Wh Lithium Ion batteries
Two AC Power Adapters, two charging trays, and international plug adapters
Adapter for GoPro cameras with acorn nut
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Deluxe travel case
Sea Dragon 2500 Photo/Video/Dive Light Specifications
Body Material | Anodized aluminum light head with fiber-reinforced polycarbonate body |
Light Source/Bulb Type | 1 x COB LED array (COB - Chip On Board) |
Brightness | 2500 lumens (maintains 2500 lumens throughout burn time at full power) |
Effective Range | 4 ft/1.2 m (depends on camera model and visibility) |
Brightness Levels | Full power (100%), half power (50%), and quarter power (25%) |
Button Control | Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle] |
Light Modes | Constant light or hidden emergency signal light (activated by long push of power button) |
Color Temperature | 5000K |
Color Rendering Index* | 90 |
Beam Angle | 120 degrees |
Battery | Lithium Ion 7.4V, 3400 mAh, 25Wh (included) |
Battery Charge Time | 170 minutes |
Run Time | 60 minutes at full power/120 minutes at half power/240 minutes at quarter power |
Depth | Tested to 200 feet/60 meters |
Dimensions |
4.8" x 2.2" x 3.8" (12.2cm x 5.6cm x 9.7cm), head only |
Weight | 13.1 ounces (371 grams), head only |
Bulb Life | 35,000 hours |
O-ring | Dual NBR o-rings (lube included) |
Buoyancy |
Negative |
*CRI is a measure of a light source's ability to show object colors "realistically" or "naturally" compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.
$ 399.00 - Sold Out
SeaLife SKU: SL963 | Helix SKU: SL963
Universal - Works with SeaLife cameras (excluding Micro HD/HD+, Micro 2.0), Olympus, Canon, Sony, Nikon, and other brands of underwater cameras that have a built-in flash
Auto Mode automatically adjusts flash brightness for optimal image exposure
Variable power adjustment allows user to manually fine-tune flash brightness for desired effect and image exposure
Easy to expand with Flex-Connect™ trays, grip and Flex Arms
Effective underwater distance range up to 8 feet (2.5m)
Depth rated to 200 feet/60 meters
Quick-release button to detach flash and aim in crevices and hard to reach areas
Universal mount fits all SeaLife cameras and other brands of underwater cameras with standard tripod mount (Ikelite tripod adapter available but sold seperately)
Auto Learn Mode easily syncs pre-flash with any digital camera
Effective underwater distance range up to 8 feet/2.5 meters
Approximately 150 flashes at full brightness with 4 AA batteries (not included)
Waterproof battery compartment
Includes universal optical cable plug (SL96307) which connects the Sea Dragon Flash optical cable to Olympus, Sea & Sea and other underwater housings using the standard 7mm optical flash port
Coiled optical cable extends from 15”(38cm) to 30”(76cm), compatible when adding one or two Flex Arms
Sea Dragon Universal Flash head with Flash Diffuser
Flex-Connect Single Tray w/ standard ¼-20 mounting screw
Flex-Connect grip
Optical Cable and Universal Flash Link Adapter
Optical Cable Plug (For Olympus, Sea&Sea and other housings using a 7mm optical cable flash port)
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Sea Dragon Case
Sea Dragon Flash Specifications
Guide Number | 66' (20m) full power/ 5' (1.5m) low power, at ISO 100 on land |
Power Adjustment Range | 8% to 100% (In Auto or Manual Modes) |
Controls | Power (On/Off), Test (Program), Brightness (Manual/Auto) |
Coverage/Beam Angle | 80° horizontal x 60° vertical (100° x 100° with included diffuser) |
Color Temperature | 5700° Kelvin, 5400° Kelvin with diffuser |
Color Rendering Index | 98 (with or without diffuser) |
Power Source | 4 AA batteries (NiMH recommended) |
Battery Life | 150 flashes at full brightness (300 at half brightness) with alkaline or NiMH AA batteries. 250 flashes at full brightness with Energizer Lithium AA. |
Recycle Time | 1 second at < 1/2 power / 5 seconds at full power |
Buoyancy | Negative |
Housing Material | Fiber-reinforced polycarbonate |
Hardware | Marine grade stainless steel |
O-ring Material | Dual NBR o-rings (lube included) |
Weight | 18 ounces (509 grams), head with batteries |
Dimensions | Head: 5"(12.7cm) x 4.5" (11.4cm) x 2.5" (6.4cm) |
$ 399.00 - Sold Out
SeaLife SKU: SL6712 | Helix SKU: SL6712
Powerful 2500 lumen LED light using the latest COB LED array technology
One button control for easy operation - one button to power light on/off and select brightness
Three brightness levels: 100%, 50% and 25%
Hidden emergency signal mode: 1 second blink interval and SOS Morse code
60 minute burn time at full power and constant brightness
Depth rated to 200 feet/60 meters
Easy to expand with Flex-Connect™ trays, grips and Flex Arms, handle, Y-S, ball joint, cold shoe and other accessories
Quick-release button to detach light and aim in crevices and hard to reach areas
120° wide beam angle evenly illuminates the subject with no hot spots (90° underwater)
Corrosion-proof metal light head for heat dispersion and durability
Removable 25W Li-Ion battery w/ charger and international plug adapters included
Waterproof battery compartment - even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics
Sea Dragon 2500 Underwater Photo/Video Light head
25Wh Lithium Ion rechargeable battery
AC Power Adapter, charging tray, and international plug adapters
Spare O-rings, O-ring lubricant, O-ring removal tool
Instruction manual
Sea Dragon 2500 Photo/Video/Dive Light Specifications
Body Material | Anodized aluminum light head with fiber-reinforced polycarbonate body |
Light Source/Bulb Type | 1 x Vero 18 COB LED array (COB - Chip On Board) |
Brightness | 2500 lumens (maintains 2500 lumens throughout burn time at full power) |
Effective Range | 4 ft/1.2 m (depends on camera model and visibility) |
Brightness Levels | Full power (100%), half power (50%), and quarter power (25%) |
Button Control | Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle] |
Light Modes | Constant light or hidden emergency signal light (activated by long push of power button) |
Color Temperature | 5000K |
Color Rendering Index* | 90 |
Beam Angle | 120 degrees (90-degrees underwater) |
Battery | Lithium Ion 7.4V, 3400 mAh, 25Wh (included) |
Battery Charge Time | 170 minutes |
Run Time | 60 minutes at full power/120 minutes at half power/240 minutes at quarter power |
Depth | Tested to 200 feet/60 meters |
Dimensions |
4.8" x 2.2" x 3.8" (12.2cm x 5.6cm x 9.7cm), head only |
Weight | 9oz (255g) head without battery ; 12.9oz (365g) head with battery |
Bulb Life | 35,000 hours |
O-ring | Dual NBR o-rings (lube included) |
Buoyancy |
Negative |
*CRI is a measure of a light source's ability to show object colors "realistically" or "naturally" compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.
$ 69.00 - Sold Out
SeaLife SKU: SL9831 | Helix SKU: SL9831
Lithium Ion Battery for Sea Dragon Lights
Rechargeable lithium ion battery (7.4 volt, 3400 mAh, 25Wh) for Sea Dragon Fluoro-Dual Beam, 1200, 1500, 2000, 2100SF, 2300 Auto, and 2500 Photo/Video/Dive Lights. Includes protective cap.
Keep a spare battery charged so you never miss an opportunity to capture that perfect shot.
$ 39.00
SeaLife SKU: SL9902 | Helix SKU: SL9902
Use the Micro Tray to add light and stability to your ultra compact underwater camera
Instantly add grips, lights, flashes and Flex Arms to the Micro Tray with just a "click!" and remove them with the push of a button
Perfect for ultra compact cameras like GoPro® (requires tripod adapter for GoPro® cameras, Item SL9813)
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
Easily expand your ultra compact camera
Mount a flash or light and add stability to your ultra compact underwater camera. Quickly and easily add grips, lights, flashes and Flex Arms to the Micro Tray with just a "click!" and remove them with the push of a button.
Mounts to all cameras with a standard 1/4-20 tripod mount and includes mounting knob.
Perfect for GoPro® and other compact cameras
Use the Micro Tray to expand your camera while keeping your set up ultra compact. Easily attach a GoPro® camera using the tripod adapter for GoPro® cameras.
$ 39.00
SeaLife SKU: SL9903P | Helix SKU: SL9903P
Use the Single Tray to add a light or flash to your underwater camera
Instantly add grips, lights, flashes and Flex Arms to the Single Tray with just a "click!" and remove them with the push of a button
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
Expand your underwater camera
Use the Flex-Connect Single Tray to easily expand your underwater camera with an external light or flash. Mount a light directly to the tray, or add a Flex-Connect Grip or Flex Arm for increased control and comfort. Attaches to any underwater camera with a standard 1/4-20 tripod mount. Includes mounting screw.
$ 49.00
SeaLife SKU: SL995 | Helix SKU: SL995
Expand your underwater camera with Sea Dragon Lighting
The Flex-Connect Ball Joint Adapter connects Sea Dragon Lighting to any underwater camera using the 1”/25mm ball joint mounting system. This heavy duty aluminum piece is built for maximum durability, and like all Flex-Connect accessories, it instantly connects Sea Dragon Lighting to a set with just a “click.”
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
$ 39.00 - Sold Out
SeaLife SKU: SL998 | Helix SKU: SL998
For an ergonomic, one-handed operation
Connect the powerful and compact Sea Dragon Lumen light head to the ergonomic Flex-Connect Handle for a handheld dive light.
Sea Dragon lights connect instantly to the handle with just a click, putting the power and coverage of the light in the palm of your hand.
An ergonomic grip for GoPro cameras
Connect the Flex-Connect Adapter for GoPro cameras to the Handle for ergonomic, handheld GoPro camera grip. The Handle features a standard 1/4-20 tripod mount on the bottom, and can be mounted to Flex-Connect Trays, standard tripods, and other accessories.
$ 39.00
SeaLife SKU: SL9905P | Helix SKU: SL9905P
A comfortable grip for your light or camera set
The Flex-Connect Grip provides a comfortable grip and improved handling for your light, flash or underwater camera set.
The rubber-armored grip "clicks" directly into any Flex-Connect tray and accepts all Flex-Connect accessories and Sea Dragon Lights & Flash heads.
Expand your camera set with a "click!" Quickly and easily expand your underwater camera set with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment. Disassemble your set with just the push of a button for convenient, lightweight traveling. |
$ 59.00
SeaLife SKU: SL9904 | Helix SKU: SL9904
Use the Dual Tray to add two lights or flashes, reducing shadowing and increasing stability
Instantly add grips, lights, flashes and Flex Arms to the Dual Tray with just a "click!" and remove them with the push of a button
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
Easily add two lights or flashes to your camera set
Use the Flex-Connect Dual Tray to mount two flashes or lights to your underwater camera for maximum brightness. Double your brightness, reduce shadowing and increase stability. Mounts all cameras with a standard 1/4-20 tripod mount.
$ 29.00
SeaLife SKU: SL996 | Helix SKU: SL996
Mount your GoPro® camera to Flex-Connect accessories
Use this adapter to mount your GoPro camera to the Flex-Connect Cold Shoe Mount, Grip, Trays, or Flex Arm. Ideal for mounting a GoPro camera directly above your DC1400 or other underwater camera using the Flex-Connect Cold Shoe Mount. Includes acorn nut.
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
$ 39.00
SeaLife SKU: SL9619 | Helix SKU: SL9619
Upgrade your Digital Pro Flash
This Flex-Connect Adapter converts the popular Digital Pro Flash (Item SL961) neck to a Flex-Connect mount that can be easily mounted with just a “click” to the Flex-Connect mounting system of grips, trays, arms, and more.
The flash head easily installs to the adapter using the existing mounting bolt on the neck and included hex-wrench. The installation to the Flex-Connect adapter should take no more than 10 minutes and requires no other tools.
Easily Expand with Flex-Connect Accessories Quickly and easily expand your lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment. |
$ 59.00
SeaLife SKU: SL9901 | Helix SKU: SL9901
Each Flex Arm adds 7 inches in length and 100 degrees of bending motion
Add up to two arms on each side of your camera set
Easily clicks into place
Direct light where ever you need it
Expand your underwater camera set with one “click!” - The Flex Arm allows for creative lighting, easy aiming, and reduced backscatter by positioning the flash or light farther away from the camera. Each arm has 100° bending motion and adds 7” of length.
The Flex Arm quickly and easily clicks into a Flex-Connect tray, grip, cold shoe adapter or to the top of another Flex Arm. Up to two arms can be added per side. Made of fiber-reinforced polycarbonate material and stainless steel hardware for maximum durability.
Expand your camera set with a "click!" Quickly and easily expand your underwater camera set with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment. |
$ 269.00 - Sold Out
SeaLife SKU: SLKIT03 | Helix SKU: SLKIT03
Includes Flex-Connect Dual Tray, two Grips, two Flex Arms, and two Y-S Adapters
Instantly add grips, lights, flashes and Flex Arms to the Dual Tray with just a "click!" and remove them with the push of a button
Mounts to all cameras with a standard 1/4-20 tripod mount
Includes mounting knob
$ 59.00 - Sold Out
SeaLife SKU: SL991 | Helix SKU: SL991
An ultra compact setup
Use the Flex-Connect Cold Shoe Mount to mount a light or flash directly to the cold shoe of your underwater camera for an ultra compact lighting solution.
Combine with the Flex-Connect Adapter for GoPro Cameras to mount a GoPro directly above your underwater camera in order to simultaneously capture underwater photos and video.
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
$ 49.00 - Sold Out
SeaLife SKU: SL999 | Helix SKU: SL999
The new Ball Joint Adapter for Flex-Connect connects any brand of underwater light that uses a standard 1”/25mm ball joint mounting system to Flex-Connect arms, grips, trays and cold-shoe mount. This heavy duty aluminum piece is built for maximum durability, and like all Flex-Connect accessories, it instantly connects nearly all brands of underwater lights to Flex-Connect with just a “click.”
Easily expand with Flex-Connect accessories
Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment.
$ 9.00 - Sold Out
SeaLife SKU: SL9817 | Helix SKU: SL9817
Easily mount a GoPro® camera to your underwater lighting
The GoPro® adapter adds a standard 1/4-20 tripod mount to your GoPro camera, allow for quick and easy mounting to underwater lighting and other accessories.
For even more versatility, the included 1/4-20 stud allows easy attachment to camera bases, as well as to the base of accessories like the AquaPod and Flex-Connect Handle.
Attaches using the thumb knob and bolt from your original camera mount. An acorn nut is included.
$ 39.00 - Sold Out
SeaLife SKU: SL9907 | Helix SKU: SL9907
The Flex-Connect 1-inch Ball Clamp connects two 1-inch diameter balls together. The plates are spring-loaded for easy assembly and breakdown. Its wing-nut handle features an attractive red anodized finish.