Norman A400B-R 400B pack, LH52K head w/ PW, B5122 battery, Super Charger, 2D reflector, strap
$ 2,442.95
Norman A400B-R 400B pack, LH52K head w/ PW, B5122 battery, Super Charger, 2D reflector, strap
Norman SKU: 810903 | Helix SKU: NR810903
Overview
Able to deliver up to 400 watt-seconds of power, the Norman A400B is our most popular Battery Portable system. Designed for the professional, the 400B is built tough for many years of hard use. And all Norman Battery Portable systems can be charged from 115 or 230 VAC and are CE tested for assignments almost anywhere.
The A400B kit includes the P400B Power Supply with contour shoulder strap, LH52K Lamphead with 2D Reflector, two B5122 Batteries, SC Super Charger and all related cables. The A400B-M modeling light version substitutes a LH52K-ML Lamphead with modeling lamp circuit and a 2D-ML reflector with a 50 watt quartz modeling lamp.
As part of our Series 500 equipment line, the A400B can be used with a wide assortment of accessory items.
All versions of the Norman Battery Porable Kits are also available with lampheads that include built-in PocketWizard™ Radio Transceivers. You can now trip single or multiple remote flash systems without the hassle of trip cords or photo eyes. This sytem can be set to operate from any channel selected on your PocketWizard™ transmitter, and the Transceiver sends confirmation whenever a signal is received.
| Model # (Part #) | Description | Battery Pack | Battery | Lamp Head | Reflector | Strap | Charger |
| A400B-R (810903) |
PocketWizard® Kit | P400B (812332) |
2 - B5122 (812863) |
LH52KR (810785) |
2D (810701) |
R4127 (810686) |
SC-400B (810860) |
Specifications
| Specifications | 400B |
| Maximum Watt-Seconds Power Output Levels Sync Voltage Battery Type Battery Operating Voltage Power Pack Dimensions Power Pack Weight |
400 400, 200, 100 and 50 5 VDC SubC Nickel Cadmium 12VDC 10.5" H x 5.25" L x 3.25" W 6 lbs |
| Recycle Time | 400B |
| 400 watt-seconds 200 watt-seconds 100 watt-seconds 50 watt-seconds |
3 seconds 1.5 seconds .80 seconds .35 seconds |
| Flash Duration | 400B |
| 400 watt-seconds 200 watt-seconds 100 watt-seconds 50 watt-seconds |
1/900 second 1/1800 second 1/3600 second 1/7200 second |
Norman B4126 Battery for P200B
$ 218.95
Norman B4126 Battery for P200B
Norman SKU: 811926 | Helix SKU: NR811926
Overview
The B4126 (811926) is a
replacement Super Battery for
discontinued P200B Power
Supply. Provides 130+ full power
flashes at 10-second intervals.
Norman B5122 Battery for B400B
$ 209.95
Norman B5122 Battery for B400B
Norman SKU: 812863 | Helix SKU: NR812863
*Special Order Item
Overview
The B5122 (812863) is a replacement Super Battery for the P400B Power Supply.
Provides 190+ full power flashes at 15 second intervals.
Norman BP320 DC power pack for DP320
$ 211.95
Norman BP320 DC power pack for DP320
Norman SKU: 811954 | Helix SKU: NR811954
Overview
Now your Allure DP320 Monolight can be used anywhere, with the BP320 (811954) Battery Power Supply. Even in the most remote locations you can have professional studio light that is compatible with the entire line of Norman light modifiers.
A fully charged battery will support approximately 115 full power flashes. The built-in level indicator shows battery power status, with a red light to tell you when it needs to be charged again. The optional R4162 Adapter allows the BP320 to be conveniently mounted to a light stand.
Specifications
|
Battery Type Battery Capacity Charge Requirement Battery Output Dimensions Weight |
Sealed lead acid 12 VDC, 2.3Ah 18VDC, 600MA 305VDC, 500MA 8.7" L, 4.3" W, 1.9" D 3 pounds |
Norman D12 Power Pack 1200 watt second
$ 2,966.95
Norman D12 Power Pack 1200 watt second
Norman SKU: 810815 | Helix SKU: NR810815
Overview
Commercial Photographers need lighting equipment that will provide the power, repeatability and versatility required to handle the endless variety of assignments they encounter on a daily basis. Norman Series 900 equipment has always been able to meet these challenges, and the D12 and D24 Digital Power Supplies are no exception.
These 1200 and 2400 watt-second systems incorporate four lamphead outlets with digital displays and individual on/off switching. Power levels are adjusted through two channels, each with a five-stop range that are adjustable in 1/10 stop increments. You can also combine the two channels to deliver full power to a single lamphead or to create a symmetrical power supply.
Compatible with all Series 900 Lampheads and related light modifiers
- Optional software for complete control from your PC
- Photo eye, 1/4" sync jack and optional PocketWizard™ Radio Receiver
- Accurate digital controls with LED display for each lamphead
- Easy to use rotary knobs control power settings and modeling light levels
- Selectable audible and visual flash verification
- Misfire alarm for each lamphead
- Flash repeatability of 1/20 stop at full power
- Slow charge option allows shooting at locations with sub-par wiring
- Full two year limited parts and labor warranty
- Independent safety approvals including ETL, CETL and FCC
Features from above picture #2
1- LED Display: Displays the power in watt-seconds that has been set for that lamphead.
2- Power Switch: Switches AC power on/off. Internal memory retains settings.
3- AC Power Inlet: 115 volt 60HZ power input, stabilized to provide repeatibility of 1/20 stop at full power with AC line voltage fluctuations between 105-125 volts.
4- Reset 15 Amp Circuit Breaker: Automatically protects the flash circuit against excessive overloads.
5- Sync Outlets: Two sync outlets available for triggering from multiple cameras or meters.
6- Computer Control Modular Jack: Used to connect the power pack to a PC via serial port when using Norman Power Supply Communication Software.
7- Lamphead Enable: Allows a lamphead to be turned off without unplugging it.
8- Modeling Lamp: Can be set to full, ratio or off. Trim control brightens or dims without losing ratio.
9- Flash Verification: Audible verification will beep twice when the unit has returned to full power. Visual verification will cycle the modeling on and off, and then return to its previous state.
10- Combine: When the pack is in combine mode, all of the power in the power pack is distributed evenly to all lampheads that are enabled.
11- Photo Eye: Can be switched on to permit remote triggering from another flash source.
12- Slow Charge: When enabled the units recycle time is increased, which is useful when shooting at a location that has sub-par wiring.
13- Power Trim Knobs: Adjusts the flash output from full to -5 f/stops in 1/10 stop increments
14- Test Button/Ready Light: Press button to manually flash unit. Switch will light when ready to be triggered.
15- Antenna: For built-in PocketWizard™ Radio Receiver.
Norman D12R Power Pack 1200 watt second w/Pocket Wizard
$ 3,154.95
Norman D12R Power Pack 1200 watt second w/Pocket Wizard
Norman SKU: 810710 | Helix SKU: NR810710
Overview
Commercial Photographers need lighting equipment that will provide the power, repeatability and versatility required to handle the endless variety of assignments they encounter on a daily basis. Norman Series 900 equipment has always been able to meet these challenges, and the D12 and D24 Digital Power Supplies are no exception.
These 1200 and 2400 watt-second systems incorporate four lamphead outlets with digital displays and individual on/off switching. Power levels are adjusted through two channels, each with a five-stop range that are adjustable in 1/10 stop increments. You can also combine the two channels to deliver full power to a single lamphead or to create a symmetrical power supply.
Additional Features:
- Compatible with all Series 900 Lampheads and related light modifiers
- Optional software for complete control from your PC
- Photo eye, 1/4" sync jack and optional PocketWizard™ Radio Receiver
- Accurate digital controls with LED display for each lamphead
- Easy to use rotary knobs control power settings and modeling light levels
- Selectable audible and visual flash verification
- Misfire alarm for each lamphead
- Flash repeatability of 1/20 stop at full power
- Slow charge option allows shooting at locations with sub-par wiring
- Full two year limited parts and labor warranty
- Independent safety approvals including ETL, CETL and FCC
Norman Power Supplies are also available with built-in PocketWizard™ radio receivers. This unique feature allows these power supplies to be used in the studio or on location without the hassle of sync cords, and it eliminates the risk of inadvertent tripping of your lights from other strobes in the area. The built-in PocketWizard™ receiver can be set to operate from any channel selected on a compatible PocketWizard™ transmitter.
Having the PocketWizard™ receiver built into the D12R and D24R eliminates the need to carry and keep track of a seperate receiver module and compatible cable. Best of all, the built-in unit is powered directly from the power supply, eliminating the need for batteries.
Features from above picture #2
1- LED Display: Displays the power in watt-seconds that has been set for that lamphead.
2- Power Switch: Switches AC power on/off. Internal memory retains settings.
3- AC Power Inlet: 115 volt 60HZ power input, stabilized to provide repeatibility of 1/20 stop at full power with AC line voltage fluctuations between 105-125 volts.
4- Reset 15 Amp Circuit Breaker: Automatically protects the flash circuit against excessive overloads.
5- Sync Outlets: Two sync outlets available for triggering from multiple cameras or meters.
6- Computer Control Modular Jack: Used to connect the power pack to a PC via serial port when using Norman Power Supply Communication Software.
7- Lamphead Enable: Allows a lamphead to be turned off without unplugging it.
8- Modeling Lamp: Can be set to full, ratio or off. Trim control brightens or dims without losing ratio.
9- Flash Verification: Audible verification will beep twice when the unit has returned to full power. Visual verification will cycle the modeling on and off, and then return to its previous state.
10- Combine: When the pack is in combine mode, all of the power in the power pack is distributed evenly to all lampheads that are enabled.
11- Photo Eye: Can be switched on to permit remote triggering from another flash source.
12- Slow Charge: When enabled the units recycle time is increased, which is useful when shooting at a location that has sub-par wiring.
13- Power Trim Knobs: Adjusts the flash output from full to -5 f/stops in 1/10 stop increments
14- Test Button/Ready Light: Press button to manually flash unit. Switch will light when ready to be triggered.
15- Antenna: For built-in PocketWizard™ Radio Receiver.
Specifications
|
SPECIFICATIONS |
D12 / D12R |
| Power | 1200 watt-seconds |
| Power Control | Full to –5 f/stops |
| Recycle Time at Full Power | 2.0 seconds |
| Flash Duration | 1/1600 second (full) |
| Guide Number* | 220 @10’, ISO 100 |
| Sync Trigger | Photo eye, 1/4" sync jack |
| Optional Sync Trigger | Built-in PocketWizard™ |
| Sync Voltage | 6 VDC |
| Flashtube | Quartz |
| Modeling Lamp Control | Off, ratio, full and trim |
| Supply Voltage | 105-125 VAC, 60HZ |
| Consumption | 15A |
| Voltage Stabilization | +/- 1% |
| Overload Protection | 15A circuit breaker |
| Dimensions | 7.5" X 7.4" X 11.7" |
| Weight | 12.3 pounds |
Norman D24 Power Pack 2400 Watt Second
$ 3,486.95
Norman D24 Power Pack 2400 Watt Second
Norman SKU: 810602 | Helix SKU: NR810602
Special Order Item
Overview
Specifications
Item Includes
Norman D24R Power Pack 2400 watt second w/ PocketWizard
$ 3,667.95
Norman D24R Power Pack 2400 watt second w/ PocketWizard
Norman SKU: 810818 | Helix SKU: NR810818
Overview
Commercial Photographers need lighting equipment that will provide the power, repeatability and versatility required to handle the endless variety of assignments they encounter on a daily basis. Norman Series 900 equipment has always been able to meet these challenges, and the D12 and D24 Digital Power Supplies are no exception.
These 1200 and 2400 watt-second systems incorporate four lamphead outlets with digital displays and individual on/off switching. Power levels are adjusted through two channels, each with a five-stop range that are adjustable in 1/10 stop increments. You can also combine the two channels to deliver full power to a single lamphead or to create a symmetrical power supply.
Additional Features:
- Compatible with all Series 900 Lampheads and related light modifiers
- Optional software for complete control from your PC
- Photo eye, 1/4" sync jack and optional PocketWizard™ Radio Receiver
- Accurate digital controls with LED display for each lamphead
- Easy to use rotary knobs control power settings and modeling light levels
- Selectable audible and visual flash verification
- Misfire alarm for each lamphead
- Flash repeatability of 1/20 stop at full power
- Slow charge option allows shooting at locations with sub-par wiring
- Full two year limited parts and labor warranty
- Independent safety approvals including ETL, CETL and FCC
Norman Power Supplies are also available with built-in PocketWizard™ radio receivers. This unique feature allows these power supplies to be used in the studio or on location without the hassle of sync cords, and it eliminates the risk of inadvertent tripping of your lights from other strobes in the area. The built-in PocketWizard™ receiver can be set to operate from any channel selected on a compatible PocketWizard™ transmitter.
Having the PocketWizard™ receiver built into the D12R and D24R eliminates the need to carry and keep track of a seperate receiver module and compatible cable. Best of all, the built-in unit is powered directly from the power supply, eliminating the need for batteries.
Features from above picture #2
1- LED Display: Displays the power in watt-seconds that has been set for that lamphead.
2- Power Switch: Switches AC power on/off. Internal memory retains settings.
3- AC Power Inlet: 115 volt 60HZ power input, stabilized to provide repeatibility of 1/20 stop at full power with AC line voltage fluctuations between 105-125 volts.
4- Reset 15 Amp Circuit Breaker: Automatically protects the flash circuit against excessive overloads.
5- Sync Outlets: Two sync outlets available for triggering from multiple cameras or meters.
6- Computer Control Modular Jack: Used to connect the power pack to a PC via serial port when using Norman Power Supply Communication Software.
7- Lamphead Enable: Allows a lamphead to be turned off without unplugging it.
8- Modeling Lamp: Can be set to full, ratio or off. Trim control brightens or dims without losing ratio.
9- Flash Verification: Audible verification will beep twice when the unit has returned to full power. Visual verification will cycle the modeling on and off, and then return to its previous state.
10- Combine: When the pack is in combine mode, all of the power in the power pack is distributed evenly to all lampheads that are enabled.
11- Photo Eye: Can be switched on to permit remote triggering from another flash source.
12- Slow Charge: When enabled the units recycle time is increased, which is useful when shooting at a location that has sub-par wiring.
13- Power Trim Knobs: Adjusts the flash output from full to -5 f/stops in 1/10 stop increments
14- Test Button/Ready Light: Press button to manually flash unit. Switch will light when ready to be triggered.
15- Antenna: For built-in PocketWizard™ Radio Receiver.
Specifications
|
*The guide number stated was determined by measuring the bare bulb at 10 feet using ISO 100.
See individual reflectors in this catalog for guide numbers using specific light modifiers at various power settings.
Norman ML600 600 watt-second monolight reflector, FQ8 FT, modeling lamp, sync cord
$ 1,025.95
Norman ML600 600 watt-second monolight reflector, FQ8 FT, modeling lamp, sync cord
Norman SKU: 810650 | Helix SKU: NR810650
Overview
Compact and powerful, these systems can handle everything from the most demanding studio assignments to high volume portrait and school photography.
These versatile systems combine Norman durability with the versatility of today's advanced electronics. The controls on Norman 400 and 600 watt-second Monolights allow power adjustments in either watt-seconds or f/stops from full power. A digital readout displays accurate, repeatable settings through a five f/stop range in 1/10-stop increments.
Additional Features:
- Compact size and weight
-Compatible with over 100 Norman accessories and light modifiers including softboxes, reflectors, grids, snoots and barn doors
- Fast, two second recycle time at full power
- Accepts Photogenic® Reflectors
- Optional software for complete control from your PC
- High-intensity modeling lamp with full, ratio and off settings
- Built-in cooling fan and over temperature protection
- Auto discharge for lower settings and power off
- Photo eye, 1/4" sync jack and optional PocketWizard™ Radio Receiver
- Lockable setting option prevents pre-established values from being changed
- Umbrella stand adapter, compatible with 3/8 through 5/8 stand posts
- Full two year limited parts and labor warranty from date of purchase
- Independent safety approvals including ETL, CETL and FCC
What's Included
Includes:
- Monolight
- Flashtube
- Modeling Lamp
- 7-inch Umbrella Reflector
- Protective Flashtube Cover
- 15' Power Cord
- Sync Cord
- R9113 Adapter Ring for use with
standard Norman Light Modifiers
Specifications
| Power | 600 W-S |
| Power Control | Full to -5 f/stops |
| Recycle Time at Full Power | 2 seconds |
| Flash Duration | 1/1200 second (full) |
| Guide Number* | 135 @10', ISO 100, bare bulb |
| Modeling Lamp | 250 W |
| Modeling Lamp Control | Off, ratio and full |
| Flashtube | Quartz, full envelope |
| Sync Trigger | Photo-eye, 1/4" sync jack |
| Optional Sync Trigger | Built-in PocketWizard™ |
| Sync Voltage | 6VDC |
| Supply Voltage | 105-125 VAC, 60HZ, ML400/ML600R 195-240 VAC, 50-60Hz, ML400-220/ML600R-220 |
| Consumption | 10A |
| Voltage Stabilization | +/- 1% |
| Overload Protection | 10A circuit breaker |
| Weight | 6.1 pounds |
| Dimensions | 5" W, 5" H, 8.5" D |
*The guide number stated was determined by measuring the bare bulb at 10 feet using ISO 100.
See individual reflectors in this catalog for guide numbers using specific light modifiers at various power settings.
Norman ML600R 400 watt-second monolight w/ PW, reflector, FQ8 FT, modeling lamp, sync cord
$ 1,295.95
Norman ML600R 400 watt-second monolight w/ PW, reflector, FQ8 FT, modeling lamp, sync cord
Norman SKU: 810653 | Helix SKU: NR810653
Overview
Compact and powerful, these systems can handle everything from the most demanding studio assignments to high volume portrait and school photography.
These versatile systems combine Norman durability with the versatility of today's advanced electronics. The controls on Norman 400 and 600 watt-second Monolights allow power adjustments in either watt-seconds or f/stops from full power. A digital readout displays accurate, repeatable settings through a five f/stop range in 1/10-stop increments.
Additional Features:
- Compact size and weight
-Compatible with over 100 Norman accessories and light modifiers including softboxes, reflectors, grids, snoots and barn doors
- Fast, two second recycle time at full power
- Accepts Photogenic® Reflectors
- Optional software for complete control from your PC
- High-intensity modeling lamp with full, ratio and off settings
- Built-in cooling fan and over temperature protection
- Auto discharge for lower settings and power off
- Photo eye, 1/4" sync jack and optional PocketWizard™ Radio Receiver
- Lockable setting option prevents pre-established values from being changed
- Umbrella stand adapter, compatible with 3/8 through 5/8 stand posts
- Full two year limited parts and labor warranty from date of purchase
- Independent safety approvals including ETL, CETL and FCC
Norman Monolights are also available with built-in PocketWizard™ radio receivers. This unique feature allows the use of multiple lights in the studio or on location without the hassle of sync cords, and it eliminates the risk of inadvertent tripping of your lights from other strobes in the area. The built-in PocketWizard™ receiver can be set to operate from any channel selected on a compatible PocketWizard™ transmitter.
Having the PocketWizard™ receiver built into the ML400R and ML600R eliminates the need to carry and keep track of a separate receiver module and compatible cable. Best of all, the built-in unit is powered directly from the monolight, eliminating the need for batteries.
What's included
- Monolight
- Flashtube
- Modeling Lamp
- 7-inch Umbrella Reflector
- Protective Flashtube Cover
- 15' Power Cord
- Sync Cord
- R9113 Adapter Ring for use with
standard Norman Light Modifiers
Specifications
| Power | 600 W-S |
| Power Control | Full to -5 f/stops |
| Recycle Time at Full Power | 2 seconds |
| Flash Duration | 1/1200 second (full) |
| Guide Number* | 135 @10', ISO 100, bare bulb |
| Modeling Lamp | 250 W |
| Modeling Lamp Control | Off, ratio and full |
| Flashtube | Quartz, full envelope |
| Sync Trigger | Photo-eye, 1/4" sync jack |
| Optional Sync Trigger | Built-in PocketWizard™ |
| Sync Voltage | 6VDC |
| Supply Voltage | 105-125 VAC, 60HZ, ML400/ML600R 195-240 VAC, 50-60Hz, ML400-220/ML600R-220 |
| Consumption | 10A |
| Voltage Stabilization | +/- 1% |
| Overload Protection | 10A circuit breaker |
| Weight | 6.1 pounds |
| Dimensions | 5" W, 5" H, 8.5" D |
*The guide number stated was determined by measuring the bare bulb at 10 feet using ISO 100.
See individual reflectors in this catalog for guide numbers using specific light modifiers at various power settings.
