Kupo 6" Pump Cup with 5/8" Baby Receiver KG088211
$ 91.95 - Sold Out
Kupo 6" Pump Cup with 5/8" Baby Receiver KG088211
Kupo 6" Pump Cup with 5/8" Swivel Baby Pin KG083911
$ 144.95 - Sold Out
Kupo 6" Pump Cup with 5/8" Swivel Baby Pin KG083911
Kupo 6" Pump Cup with 5/8" Swivel Baby Recceiver KG088111
$ 106.95 - Sold Out
Kupo 6" Pump Cup with 5/8" Swivel Baby Recceiver KG088111
Kupo 6" Pump Cup with Det. 5/8" Swiveling Adapter KG083811
$ 145.95 - Sold Out
Kupo 6" Pump Cup with Det. 5/8" Swiveling Adapter KG083811
Kupo 6" Suction Cup With Swivel Coupler For 2" Pipe
$ 265.95
Kupo 6" Suction Cup With Swivel Coupler For 2" Pipe
Mfr SKU: KG079512 | Helix SKU: KUKG079512
Overview:
Features:
- Can support up to 44lbs (20kg). 6" suction cup comes with a swivel coupler for 2" tube primary designed for vehicle rigging and offers a temporary mounting solution on a car
- The suction cup can be used at temperatures from -12 degree to 49 degrees
- Red indicator on the suction cup warns of any vacuum loss
- Features a steel ball
- The T handle on the coupler allows to tighten easily and coneniently
Specifications:
- Color: Black and Silver
- Material - Primary: Aluminum
- Material - Secondary: Rubber
- Material - Tertiary: Silicon
- Product Height: 4.92in / 12.5cm
- Product Length: 6.5in / 16.5cm
- Product Width: 5.51in / 14.0cm
- Product Weight: 3.5lb / 1.59kg
- Maximum Payload Capacity: 44.05lb / 20.0kg
- Maximum Jaw Diameter: 2.01in / 51.0mm
- Minimum Jaw Diameter: 1.89in / 48.0mm
- Stand Adapter Type: 2in Coupler
Kupo 7' Click Stand Black KS041611
$ 83.95 - Sold Out
Kupo 7' Click Stand Black KS041611
Kupo 75cm long PVC Coated Safety Wire - 3.5mm Diameter, KG060912
$ 10.69
Safety cables are recommended when supporting lights, cameras or accessories from the ceiling in case they unexpectedly come loose from where they are mounted. The KG060912 is a lightweight stainless steel cable coated with PVC. It is 29.52 (75cm) long, and has a diameter of 0.13 (3.5mm) with a load rating of 22lbs (10Kg). The KG060912 comes equipped with a carabiner closure.
Kupo 8' Click Stand Black KS041711
$ 88.95 - Sold Out
Kupo 8' Click Stand Black KS041711
Kupo 80mm Caster with Brake, 22mm Round Adapter, Set of Three, KS940322
$ 63.95
Kupo 80mm Caster with Brake, 22mm Round Adapter, Set of Three, KS940322
Kupo 80mm Caster with Brake, 22mm Square Adapter, Set of Three, KS940422
$ 64.95
Kupo 80mm Caster with Brake, 22mm Square Adapter, Set of Three, KS940422
Kupo 9" Super Visor End Jaw KG603012
$ 78.95 - Sold Out
Kupo 9" Super Visor End Jaw KG603012
Kupo 9-Inch Super Viser Clamp with Hex Receiver, End Jaw (KG600212)
$ 65.00
Kupo 9-Inch Super Viser Clamp with Hex Receiver, End Jaw (KG600212)
Kupo 9-Inch Super Viser Clamp with Hex Receiver, End Jaw (KG600212) Default
$ 65.00 - Sold Out
Kupo 9-Inch Super Viser Clamp with Hex Receiver, End Jaw (KG600212) Default
Kupo Adapter, Junior to Baby, 1-1/8-Inch Stud to 5/8-Inch Stud, KG006312
$ 20.19
Kupo Adapter, Junior to Baby, 1-1/8-Inch Stud to 5/8-Inch Stud, KG006312
Kupo Adapter, Junior to Baby, 1-1/8-Inch Stud to 5/8-Inch Stud, KG006312 Default
$ 15.00 - Sold Out
Kupo Adapter, Junior to Baby, 1-1/8-Inch Stud to 5/8-Inch Stud, KG006312 Default
Kupo Adjustable Gaffer Grip, KG500611
$ 41.95
Kupo Adjustable Gaffer Grip, KG500611
Kupo Adjustable Gaffer Grip, KG500611 Default
$ 34.00 - Sold Out
Kupo Adjustable Gaffer Grip, KG500611 Default
Kupo Alli Clamp - Black, KG302011
$ 19.95
Kupo Alli Clamp - Black, KG302011
Kupo Alli Clamp - Silver, KG302412
$ 19.95
Kupo Alli Clamp - Silver, KG302412
Kupo Aluminum Core for Seamless - 9 Feet (2.75m) KG084312
$ 56.95
Kupo Aluminum Core for Seamless - 9 Feet (2.75m) KG084312
Kupo Aluminum Core for Seamless - 9 Feet (2.75m) KG084312 Default
$ 41.75 - Sold Out
Kupo Aluminum Core for Seamless - 9 Feet (2.75m) KG084312 Default
Kupo Apple Box - Full - 20"x12"x8"
$ 49.95 - Sold Out
Kupo Apple Box - Full - 20"x12"x8"
Kupo SKU: KG087311 | Helix SKU: KUKG087311
Overview
The wooden apple box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling dolly track, giving short people a boost, a quick stool for a weary grip, a workbench, a mounting platform, etc. They come in four standard sizes that are fractions of a standard full apple box which is 20" x 12" x 8". Two halves make a full, four quarters make a full and eight pancakes make a full.
Kupo's Apple Boxes are made from high quality nine ply Baltic Birch. Central bracing for increased strength and durability and rounded edges that are easy on the hands. Natural Finish.
*Full Apple Box only.
Specifications
20" x 12" x 8"
Kupo Apple Box - Half - 20"x12"x4"
$ 42.95
Kupo Apple Box - Half - 20"x12"x4"
Kupo SKU: KG087211 | Helix SKU: KUKG087211
Overview
The wooden apple box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling dolly track, giving short people a boost, a quick stool for a weary grip, a workbench, a mounting platform, etc. They come in four standard sizes that are fractions of a standard full apple box which is 20" x 12" x 8". Two halves make a full, four quarters make a full and eight pancakes make a full.
Kupo's Apple Boxes are made from high quality nine ply Baltic Birch. Central bracing for increased strength and durability and rounded edges that are easy on the hands. Natural Finish.
Specifications
The half apple box measures 20" x 12" x 4".
Kupo Apple Box - Pancake - 20"x12"x1"
$ 26.95
Kupo Apple Box - Pancake - 20"x12"x1"
Kupo SKU: KG087011 | Helix SKU: KUKG087011
Overview
The wooden apple box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling dolly track, giving short people a boost, a quick stool for a weary grip, a workbench, a mounting platform, etc. They come in four standard sizes that are fractions of a standard full apple box which is 20" x 12" x 8". Two halves make a full, four quarters make a full and eight pancakes make a full.
Kupo's Apple Boxes are made from high quality nine ply Baltic Birch. Central bracing for increased strength and durability and rounded edges that are easy on the hands. Natural Finish.
The pancake, technically an eighth apple box, measures 20" x 12" x 1". When every inch counts, the pancake is there to lend a hand.
Specifications
Kupo Apple Box - Quarter - 20"x12"x2"
$ 33.95
Kupo Apple Box - Quarter - 20"x12"x2"
Kupo SKU: KG087111 | Helix SKU: KUKG087111
Overview
The wooden apple box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling dolly track, giving short people a boost, a quick stool for a weary grip, a workbench, a mounting platform, etc. They come in four standard sizes that are fractions of a standard full apple box which is 20" x 12" x 8". Two halves make a full, four quarters make a full and eight pancakes make a full.
Kupo's Apple Boxes are made from high quality nine ply Baltic Birch. Central bracing for increased strength and durability and rounded edges that are easy on the hands. Natural Finish.
Specifications
The quarter apple box, measures 20" x 12" x 2".
Kupo Arri 3/8In Locating Pin To Arri Rossette (M6) Adapter
$ 65.95
Kupo Arri 3/8In Locating Pin To Arri Rossette (M6) Adapter
Mfr SKU: KG035811 | Helix SKU: KUKG035811
Overview
Features
- Designed for attaching to a camera cage, rosette handle and any other ARRI standard Rosette fitting
- Kupo Arri Rosette is 31.8mm in diameter with 60 teeth
- Prevents equipment rotation with the Arri locating pin
- The M6 internal female thread is designed for mounting Arri standard Rosette-style accessories and allows 360 degree rotation
- Made of stainless steel and aluminum
Specifications
- Color: Black
- Material - Primary: Stainless Steel
- Material - Secondary: Aluminum
- Product Height: 1.22in / 3.1cm
- Product Length: 1.42in / 3.6cm
- Product Width: 1.22in / 3.1cm
- Product Weight: 7.05lb / 3.2kg
- Stand Adapter Type: Arri 3/8in-16 Locating Pin to Arri Rosette (M6)
Kupo Arri Monitor Bracket For Wcu-4
$ 55.95
Kupo Arri Monitor Bracket For Wcu-4
Kupo SKU: KG079011 | Helix SKU: KUKG079011
Overview
This monitor bracket is compatible with the ARRI WCU-4 Wireless Compact Unit. Designed for easily mounting to the top or bottom of the WCU-4 with two bolts (included) and attaches to on-board monitors with any accessory. Comes with a 1/4in-20 male thread. The 18 degree tilt helps for viewing the monitor with ease and convenience. Ideal also for using with Kupo’s Vision Lock Quick-Release Mounting Set (KG046212) that makes it fast and easy to disconnect the monitor from the bracket when needed. In addition, the Kupo 3.5in Long 5/8in Baby Stud with 1/4in-20 Male (KG012412) connects a gobo head and this bracket.
Features
- Designed for mounting the on-board monitor, which comes with 1/4-20 male threaded, on WCU-4 by two bolts
- Compatible with ARRI WCU-4 Wireless Compact Unit
- The 18 degree tilt helps to conveniently view the monitor
- WCU-4 can be mounted on the stand through a grip head by attaching a 16mm baby pin with 1/4in-20 thread
- Ideal for using with Kupo’s Vision Lock Quick-Release Mounting Set (KG046212) to attach or disconnect the monitor from the bracket when needed.
Specifications
- Color: Black
- Material - Primary: Aluminum
- Material - Secondary: Steel
- Product Height: 0.47in / 1.2cm
- Product Length: 4.84in / 12.3cm
- Product Width: 3.86in / 9.8cm
- Product Weight: 1.21lb / 0.55kg
- Stand Adapter Type: 1/4in-20
Kupo Arri Wcu-4 Monitor Mount And Docking Bracket
$ 195.95
Kupo Arri Wcu-4 Monitor Mount And Docking Bracket
Mfr SKU: KG079211 | Helix SKU: KUKG079211
Overview
The Kupo ARRI WCU-4 Monitor-Bracket with handgrip allows you to place your monitor as close to the index mark of the focus knob as possible. Features include an ergonomically designed handgrip that transfers weight efficiently from the wrist to the biceps. An additional 5/8in (16mm) baby receiver is on the bottom of the handgrip to allow it to serve as a docking bracket for a c-stand. The monitor bracket also allows you to attach an on-board monitor with any equipment that comes with 1/4in-20 male thread. Ideal for using with Kupo’s Vision Lock Quick-Release Mounting Set (KG046212) that makes it fast and easy to disconnect the monitor from the bracket when needed.
Features
- Handgrip enables you to place the monitor as close to the index mark of the focus knob as possible
- Features an ergonomically designed handgrip that efficiently transfers the weight from the wrist to the biceps
- Additional 16mm baby receiver is designed on the bottom of handgrip which allows it to serve as a docking bracket for a C stand
- The monitor bracket also allows you to attach an on-board montior with any equipment that comes with 1/4in-20 male thread
- Ideal for using with Kupo’s Vision Lock Quick-Release Mounting Set (KG046212) to attach or disconnect the monitor from the bracket when needed.
Specifications
- Color: Black
- Material - Primary: Aluminum
- Product Height: 0.87in / 2.2cm
- Product Length: 2.09in / 5.3cm
- Product Width: 1.5in / 3.8cm
- Product Weight: 1.1lb / 0.5kg
- Stand Adapter Type: For Arri Focus Puller (WCU-4)
Kupo Articulated Arm with Baby 5/8 Inches (16mm) Stud with 3/8 Inches-16F KG3...
$ 98.95
Kupo Articulated Arm with Baby 5/8 Inches (16mm) Stud with 3/8 Inches-16F KG3...
Kupo Articulated Arm with Baby 5/8 Inches (16mm) Stud with 3/8 Inches-16F KG300512
$ 72.95
his Convi Clamp accessory is multi-segment five-section arm with four double ball joints, each with a locking knob for precise manipulation of each of the joints. The two end segments are shorter than the three center segments. One end has a baby 5/8" (16mm) stud tapped with a 3/8"-16 thread and the other has a hex stud for mounting in a Convi Clamp.
Kupo Assistant'S Front Box Mount For A Fluid Head
$ 267.95
Kupo Assistant'S Front Box Mount For A Fluid Head
Kupo SKU: KG047611 | Helix SKU: KUKG047611
Overview
Features
- Built for easily mounting the Kupo Front Box to a Fluid Head or other equipment
- Two twist-locking pins for firmly attaching to the Fluid Head by simply sliding round hanging pins into the groove of front box bracket to keep the box in place
- Twist locking pin is knurled, which makes it easy to tighen securely
- Feature a unique spring locking pin that keeps the Front Box secure
- Aluminum plate with a black anodized finish
Specifications
- Color: Black
- Material - Primary: Aluminum
- Product Height: 1.38in / 3.5cm
- Product Length: 1.77in / 4.5cm
- Product Width: 7.68in / 19.5cm
- Product Weight: 0.48lb / 0.22kg
- Stand Adapter Type: For Fluid Head
Kupo Baby 3-Inch Wall Plate, Baby 5/8-Inch (16mm) Stud, KG003512
$ 15.95
Kupo Baby 3-Inch Wall Plate, Baby 5/8-Inch (16mm) Stud, KG003512
Kupo Baby 3-Inch Wall Plate, Baby 5/8-Inch (16mm) Stud, KG003512 Default
$ 12.50 - Sold Out
Kupo Baby 3-Inch Wall Plate, Baby 5/8-Inch (16mm) Stud, KG003512 Default
Kupo Baby 5/8 Inches (16mm) Offset Arm KG006512
$ 32.95
This 15" (38 cm) arm consists of a baby receiver on one side and two opposing baby studs on the other. It is used to position a light fixture or accessory away from the light stand. Perfect for hiding your light stand behind a background or set wall.
Kupo Baby 5/8 Inches (16mm) Snap-In Pin KG000112
$ 8.49
This Convi Clamp accessory has a hex stud on one side and baby stud the other for mounting light fixtures or any other piece of grip equipment or accessory with a baby receiver. These babies are generally bought by the handful and considered a "must have" item in your grip bag.
Kupo Baby 5/8-Inch (16mm) Receiver for 3 & 4 Way Clamp, KG005912
$ 15.49
This baby 5/8 (16mm) receiver quickly attaches to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG900712) to accept any light fixture or accessory with a baby (5/8 - 16mm) stud. All accessories for the 3 4 Way Clamp System have a proprietary notch that slides into one of the mounting locations and then is secured by turning the locking collar.
Kupo Baby 5/8-Inch (16mm) Side Arm KG809712
$ 69.95
This arm consists of a heavy-duty clamp on one side and opposing double baby (5/8" - 16mm) pins on the other. It can be mounted quickly to the riser section of a light stand at any height to accept a light fixture or any accessory with a baby receiver.
Kupo Baby 5/8-Inch (16mm) Stud, 108mm long for 3 & 4 Way Clamp, KG005512
$ 14.95
This baby 5/8 (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG900712) to accept any light fixture or accessory with a baby (5/8 - 16mm) receiver. All accessories for the 3 4 Way Clamp System have a proprietary notch that slides into one of the mounting locations and then is secured by turning the locking collar. The KG005512 is 4.25 (108mm) long.
Kupo Baby 5/8-Inch (16mm) Stud, 66mm long for 3 & 4 Way Clamp, KG005712
$ 13.95
This baby 5/8 (16mm) stud quickly attaches to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG900712) to accept any light fixture or accessory with a baby (5/8 - 16mm) receiver. All accessories for the 3 4 Way Clamp System have a proprietary notch that slides into one of the mounting locations and then is secured by turning the locking collar. The KG005712 is 2.6 (66mm) long.
Kupo Baby Boom - Steel, KG601612
$ 110.95
A boom is an essential tool for positioning a light fixture either directly above the photographer, videographer or cinematographer to create a beautiful flat light, or positioned above the subject acting as a hair light, etc. This all metal, steel construction boom features an ear that is designed to fit between the plates of a grip head. It comes equipped with a built in hook at the tail end for adding sandbags for counter-weight. This boom extends from 3.8 -7.8' (1.1 -2.4m) and will support 11 lbs (5 Kg) when fully extended. The Steel Baby Boom comes in a chrome plated steel finish.
Kupo Baby Drop Ceiling Adapter, 5/8 Inches (16mm) Stud KD302112
$ 12.95
This adapter is a favorite for trying to find a suitable mounting point on drop ceilings. The male version of this adapter features a 5/8" baby stud for mounting light fixtures or any accessory with a 5/8" (16mm) receiver.
Kupo Baby Drop Ceiling Mount, Baby 5/8-Inch (16mm) Receiver, KD302012
$ 26.95
This adapter is a favorite for trying to find a suitable mounting point on drop ceilings. The drop ceiling mount, also commonly called a scissor mount, attaches to an intersection in the metal grid that supports the tiles. It remains a must have accessory for shooting in office buildings. The KD302012 features a 5/8 (16mm) receiver with metal locking knob will accept any light fixture or accessory with a 5/8 (16mm) stud.
Kupo Baby Kit Stand, KS140511
$ 135.95
This stand may be called a baby, but don't let its name fool you! This stand will reach an impressive height of just over 12.5' (3.85 m). Besides it's impressive height it also has a load capacity of 19.8 lbs (9 Kg). In addition to all the quality details that makes Kupo stand out from other brands, this stand has the mounting stud welded directly to the top riser increasing it's strength and durability, not to mention a nice clean look.
Kupo Background Paper Drive Set
$ 59.95
Kupo Background Paper Drive Set
Kupo SKU: KG084411 | Helix SKU: KUKG084411
Overview
The Background Paper Drive Set is a pair of adapters that expand and lock securely inside the core of a roll of seamless paper. One adapter has a plastic cog that accepts a plastic drive chain so that you can adjust the length of your background comfortably and a tension control so the background doesn't unroll by itself due to gravity.
Kupo Backlite Base Stand, KS040211
$ 27.95
The Fold Away Backlite Stand is a great addition to your stand bag. This small but mighty stand brings your lighting fixtures or cameras a mere 3.5 inches (9 cm) above the ground. The solid steel construction will support a hefty 33 lbs (15 Kg) and folds up in a jiffy for easy transport and storage. This stand is accompanied by the Kupo KS-017 Universal Reversible Stud Adapter allowing you to mount lighting fixtures, various grip equipment directly and cameras with the addition of the Kupo KS-CB01 camera platform.
Kupo Basic 5" Grip Pin - Old Style
$ 6.69
Kupo Basic 5" Grip Pin - Old Style
Kupo SKU: KG011212 | Helix SKU: KUKG011212
Overview
This 5" (12.7cm) steel baby (5/8" - 16mm) pin is designed to be mounted in the head of a grip head, or grip arm and still have a few inches sticking out of the head where a light fixture or any other accessory with a baby receiver can be mounted.
The combination of a grip head and grip arm give you complete freedom to position your light fixtures or any accessory with a baby receiver virtually anywhere. Having a couple of these babies in your grip kit will give you unlimited possibilities.
