Asis SKU: AS1183 | Helix SKU: AS1183
This Asis Speedring Adapter Insert for Profoto lights will fit into the Asis Speed Ring to allow softboxes to be mounted onto the Profoto family of lighting or other monolight that utilize the Profoto Mount.
This replacement sync cord for the ASIS 500 Monolight is 3.5m (11.5') in length and features a pc connection on one end and a mini plug on the opposite end.
This Junior Pipe Clamp works on diameters from 20mm to 55mm and has a 1-1/8 junior receptor and cable reinforcement hook.
This clamp is designed to mount small fixtures from a drop ceiling frame. Attachment: 5/8" male; material: zinc steel; weight: 0.37 lbs.
Safety cables add needed security this 4mm diameter cable is 39 inches long. Diameter: 0.16 in.; length: 39.37 in.; load capacity: 66.14 lbs.; material: steel.
This Avenger Snap-In Articulated Arm is the perfect accessory for your Super Clamp or Mini Clamp. The articulated design gives great flexibility in studio set ups. Attachment: type 40; color: silver; length: 30.71 in.; load capacity: 0.77 lbs.; material: aluminum; weight: 1.39 lbs.
This Avenger Snap-In Articulated Arm is the perfect accessory for your Super Clamp. A hexagonal mounting pin helps stop twisting. Attachment: hexagonal - female attachment; attachment 2: 16mm pin attachment; color: silver; length: 30.71 in.; load capacity: 0.77 lbs.; material: aluminum; weight: 1.39 lbs.
This French Flag Holder is designed to fit D300 or D301 articulated arms, D310 Mini Flex Arm or Maxi Flex Arm D315. Attachment: 6mm attachment; material: zinc steel; weight: 0.04 lbs.
Great for use as a lens shade or Gobo, this Universal Flextention Kit includes a Flextension Arm, Mini Clamp, 3/8-Inch Square Adapter, 10mm Socket Adapter, Super Clamp, Hexagonal Adapter and Black Plastic Flag. Arm length: 19.68 in.; color: black; weight: 2.54 lbs.
$ 63.88 - Sold Out
Avenger SKU: D560 | Helix SKU: BOD560
The Avenger D560 Ball and Socket Flag Arm is used to support a French Flag, to shield the camera lens from flare, as well as other light-weight items.
This ball and socket flag arm's multi section design allows a wide range of positioning capabilities. The arm also able to mount to many different light stands or tubes.
Length: 16.93 in.
Material: Chrome Steel
Weight: 0.71 lbs.
This screw in Baby Pin features a wood screw for mounting. Attachment: 5/8-Inch male; material: zinc steel; weight: 0.11 lbs.
This foamcore support features a clamp system to enable precise positioning. Mounting is via a 16mm socket. Attachment: type 1; color black; weight: 1.76 lbs.
Lock Off Knob Set Of 5 Pcs
Bongo SKU: A5-01 | Helix SKU: PR6918
Made with BAMBOO! Patented button-type closure design. Sturdy and Reusable. Ideal for securing unruly cables, cords and radio triggers.
Pyrex flash tube for PM10 and 8050 light heads. Maximum power 400ws.
Cactus SKU: CACV6IIS | Helix SKU: CUCACV6IIS
The Cactus V6 IIs is a wireless flash trigger dedicated for Sony camera and flash that supports HSS and can remote control power output and zoom angle of Sony system flashes. It can also triggers the Cactus V6 II, which makes the V6 IIs the World’s First Sony-supported wireless flash trigger that supports cross-brand high-speed sync (HSS) and control power output and zoom angle of Canon, Fujifilm, Nikon, Olympus, Panasonic and Pentax system flashes all at the same time.*
Equipped with two (2) high-speed sync modes (Normal HSS and Power Sync), AF-assist, auto-detect camera and flash system, Multi-master, and remote control abilities of power and zoom, Cactus V6 IIs packs all that you need for your Sony system in a compact body with simplistic controls.
* With the exception of Sony system flashes due to special timing requirements so it must be paired with a Sony camera in order to support HSS.
Cactus Wireless Flash Transceiver V6 IIs
Compatible flash models
Sony ADI / P-TTL HS models:
- Metz 44AF-14, 64AF-1;
- Nissin i40, i60*;
- Sony F43M, F58AM4, F60M
* tested with Auto flash profile
Notes on compatibility:
1 AF-assist works when the camera sends out a corresponding signal.
2 Requires a hot shoe adapter such as Sony ADP-MAA.
Canon SKU: 8276A001 | Helix SKU: CA8276A001
This Center Jaw Vise Grip can clamp onto poles or flat surfaces up to 3 inches thick. At one end of the clamp is a 5/8" pin to mount lights or other studio equipment to the vise grip. Because the vise mouth is at the center, the light will always be the same distance from the clamp regardless of how thick the surface the vise grip is attached to.
(1x) Center Jaw Vise Grip - 3"
Outside Dimensions No
Inside Dimensions No
Product Weight (lb) 1 lb (0.5 kg)
Manufacturer Studio Assets
Eiko SKU: 15144 | Helix SKU: EIFTDFG
|Approx Initial Max Beam CP||600|
|CT deg K||2900|
|Special Desc||Dichroic Reflector w/ Front Glass|
|Type Use||Display 30|
Eiko SKU: 49251 | Helix SKU: EIQT18504P
18W Quad-Tube 5000K G24q2 4 Pin Base Fluorescent
|Mercury Content (mg)||2.2|
|Approx Initial Lumens||1150|
|Approx Mean Lumens||980|
|CT deg K||5000|
|Approvals||IMERC, TCLP Compliant|
Eiko SKU: 09325 | Helix SKU: EILED11WPAR30FL850KDIMG6
LED Litespan PAR30, Flood 40 Deg, 11W - 850lm, Dim, 5000K, 80CRI E26 120VAC
|Lumens per Watt||77|
|Base Type||Medium Screw (E26)|
|Bulb Type||PAR 30|
|CT deg K||5000|
|Equivalent||75W PAR 30 Incandescent|
|Ambient Operating Temp Range||-20° C (-4° F) to 40° C (104° F)|
|Approvals||cULus, Energy Star|
One filter to fit the 21cm Accessory Holder 26034.
The rotating facilty of the Accessory holders means that Elinchrom flash can be successfully polarized to help control reflections and unwanted highlights. Polarizing filters absorb heat, so reduce modelling lamp power whenever possible.